LION PHOTOBOOTH PROBLEMS

Okay is anyone else having problems with the new photobooth effects with the first page? cause i am and i cant use them and other effects wont work either! anyone wanna help me !! greatly appriciated!

If you describe with some more details what is happening perhaps someone will.

Similar Messages

10.6.8 and Lion wifi problem

hello,
I am trying to use my mac for one week...... ;(
everything was fine until update to 10.6.8... wifi problem as many of you already know. tried to update to lion, same problem. Got back to 10.6 and then update to 10.6.8 using software update... then formatted again, fresh install 10.6 update to 10.6.8 using combo update, same problem.
tried to delete firewall file, turned off ipv6, changed security of my router from wpa2 to wpa, tried different channels, reset SMC and RAM, all the solutions we can research... all the same
now I am on 10.6.7 and seems i still has the problem happening....
hello apple, more than a month and no solution yet????
I've read somewhere a new procedure that consists in update to 10.6.8 and before restart do some procedures.... but I can't find it anymore, any help?
I guess that solution is the only one remaining I did not try yet.
thanks and regards,
raul

well, it's caused by software only, there is nothing wrong with airport hardware
hard to believe, it's like windows old time sake, loosing precious days fighting with a computer...
too bad apple

Since installing LION having problems getting photo images to upload?

since installing LION having problems getting photo images to upload? anyone else havie this problem? I did finally get a message that the format was wrong, but I have changed nothing on my camera. Only change was the installing of LION.

This is from the Kodak site which says there is no Lion compatible driver/software yet, but it is coming in late August:
http://support.en.kodak.com/app/answers/detail/a_id/41646/kw/os%20x%20lion/selec ted/true
If you don't want to wait there is always this kind of device for less than $10 (I don't own or endorse it):
http://www.walmart.com/ip/Moultrie-USB-2.0-SD-Card-Reader/14972138

After a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

after a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

Lion sleep problem

Hi folks,
I read all messages on the Lion sleep problem, verified all relevant settings, and tried all that was recommended and applicable, but to no avail. The display goes to sleep as set in energy saver but not the disk. Does anyone has more to offer on this subject? And apropos SleepPlease: I in principle refuse to download software that puts the machine to sleep when it's supposed to do so on it's own. Any help is appreciated.
Best
Frank

I tried both of those suggestions an am still having the problem. My settings are set to sleep the display and the monitor after 10 minutes. Most times it wakes up fine, but it seems that since the update it does not wake up after being asleep for a considerable amount of time.... I have to do a hard reset to get it to come back up.

I have a MacBook early 2008 running OS X Lion 10.7.5 (11G63). Could I upgrade to Mountain Lion without problems?

I have a MacBook early 2008 running OS X Lion 10.7.5 (11G63). Could I upgrade to Mountain Lion without problems?

No... the specs are
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
http://www.apple.com/osx/specs/

Mountain Lion WiFi Problems (recap)

Folks, wanted to recap this as I am finding the problem much more broad than my original post (here: https://discussions.apple.com/message/19123146#19123146). Here's my setup:
MacBook Air 13", Mid 2011
Mountain Lion
Wifi Problems, cannot connect to open wi-fi and Sprint hot spot.
CAN connect to Time Capsule (at least I could before I started futzing with my setup while on the road)
here's what I've done so far:
Reset SMC
Zapped PRAM
Reduced MTU to 1300
Set hotspot to 802.11g only
Set IPv6 to Local-link only
Set up a new user account, no connection there either
Repair disk
Repair disk permissions
Removed WiFi in networking control panel and re-add.
Remove the network from control panel AND remove keys from Keychain
What I have not done but will try later:
Reinstall ML
Disable WMM
Observations:
ML seems to think there is a connection to the wi-fi, but it can never get an IP address
Using a static IP on the network doesn't help the problem
My hotspot never really registers the MBA as a connection

Tell you what worked for me .. finally.
Had two Apple technicians on the case - over the phone. Have to say, those guys are awesome! - with patience of saints! But to the point! As there was nothing obviously wrong with operating system, they promised to call me back the following day but suggested talking to my Internet Service Provider about the router (D-Link router). The ISP remoted to my iMac and logged into router site and changed channel selection from automatic to manual. He chose channel 13, and suddenly my MBA connected and has been connecting smoothly ever since. The reasons I had problems was that there was over 10 available wi-fi networks in my flat, some of which showed as having stronger signal than my own. The ISP guy told me this, increasingly, becomes and issue, especially in blocks of flats - the ether is filled with wi-fi networks to the point of saturation. He also said, his choice of channel 13 was just a fluke and it might turn out I'd have to change it again.
So, although the problem is now solved, there still remains this one nagging question: Why did the wi-fi connectivity zonked right after Mountain Lion upgrade?

Do i have a virus, or is it just Mountain Lion teething problems?

Ever since i upgraded to Mountain Lion, it has impressed me, but also shocked me. It has some really useful features, and looks beautiful, but i cant help wondering if Apple is loosing it's touch, when it behaves like Windows Vista. The first problem was that it randomly kept restarting whilst in sleep, whick causes lots of problems. That has stopped now, but the are even worse problems. Web based application ofthen crash and are unresponsive, and it denies the existance of my Air port, which it is connected to, which keeps all the backups. Also, I recently noticed a Java DMG in Disk utility, but it wasn't in finder, when i looked, so i ejected it using disk utility. These are all tell tale signs of a virus, however, it also claims that the bootcamp partition doesn't exist, (yet i can still boot from it, and use windows), and also it told me that it couldn't eject Macintosh HD, because itunes was using it. Why would I ask my best computer to commit suicide? Also, when i connect my portable hard drive to it, it doesnt show up, but if i connect it in Windows or on another Mac, it works fine. So, it's either a virus, a reliability issue in Mountain Lion, Please help.

You don't have a "virus." That's the Windows way of thinking. You have a misconfigured system. What exactly happens when web-based applications crash?

New Mac Mini with Lion Video Problem With Dell E228WFP monitor

Just purchased a new mini Mac 2.3 with Lion pre installed. I connected to my old Dell E228WFPI monitor via the Mini Display to VGA adapter. The mini mac worked fine for an hour until I put it to sleep. It would not rewake. After rebute the gray screen and apple logo appear with clock, but after clock screen to black and monitor goes to power saver mode. Took unit to apple store twice and could not resolve problem by changing resolution or other methiods. Finally, we learned that the system works fine using Belkin HDMI to DVI cable. This Dell Monitor had DVI connector. Hope this helps...

How can a computer that's been turned off (and I mean completely OFF) get a network request? Only a sleeping computer should react to such a request. If you're sure you shut down (Apple Menu, Shut Down), then only an internal power supply or logic board problem should cause this. The only way it could be software is if Lion is not shutting down the computer but is instead putting it to sleep. Is it a new Mac Mini? If so, you should have it replaced or repaired.

Logic 9 + Mountain Lion = Performance Problems

Hi,
After months of debating to upgrade to Mountain Lion, I did it (and regret it like iOS 6).
I'm just wondering if anyone gets the issue with Logic 9, where it works for around an hour no problems, then the CPU meter goes mental and causes glitching in the audio no matter what I/O buffer size I choose, or what sample rate my projects in, OR how many plugins/instruments I have open?
It's really starting to affect my clients as to solve the problem the OS needs a full reboot.
I am fully updated in Software Update and it worked perfectly until Mountain Lion.
Hope there is a solution!
Tim

Your question is too vague... More details are required...

Many Lion Server Problems

I think I have run into most of the Lion Server issues mentioned so far and perhaps a few self inflicted new ones.
1) Upgrade from Snow Leopard worked except the migration failed. Naturally I did not have a backup of the server configuration.
2) Manual configuration has many problems related to the machine name. I was using a linux box for DNS and a private LAN DNS name space. My router is configured to forward many services to my OSX Server box. Somehow I could not configure Lion Mail to operate. The machine name, Internet name, local internet name, etc. are very confusing and different things happen depending upon using Server or Server Admin. In Snow Leopard I could use a command line utility to set the return mail address to my MX record but under Lion I had to eliminate the private LAN name space, configure Lion to be the DNS before I could get e-mail to operate correctly from both IMAP and WEB mail.
3) Once you attempt to use Open Directory the only way to correct a failed configuration is to re-install from scratch.
4) If LDAP and the Password process fail to launch then they ping on/off every 10 seconds forever. Only a re-install from scratch is the fix. When this happens it appears that the permissions on the boot drive are hopelessly broken. I do not mess with the permissions but now I am pondering a nightly permissions repair script.
5) Using self signed certificates seems to cause many problems. If I use them for the mail server everything is OK. If I use them for Open Directory I cannot seem to get the other systems to connect.
6) Under Snow Leopard I could see all users and their pictures on the remote Mac's. I can't find this on Lion.
7) Open Directory quit after a week of operation requiring a clean install from my backup. I turned off Reserve Server Resources. I hope this helps.
8) Timeouts on Lion seem to be infinite. Once one application falls into a timeout you eventually must power cycle the whole machine.
9) The first time a user users mail I have to force kill it and restart before it performs the initial configuration. This has happened 3 times so far.
10) Manually editing user permissions from Finder within the Admin account (i.e. correcting my old user directories to match my new user ID's) is an exercise in futility. Using the command line seems to be the only reliable way.
11) I still cannot get profiles to work but I am afraid to try because the server seems to fragile.
12) Carbon Copy Cloner is a required tool with Lion. As soon as you have something working, make a fresh backup so you do not have to redownload everything. I now make a nightly backup of the boot drive with CCC and cron.
13) Some settings only take affect on a reboot, when you are making/testing changes this causes an interesting phase delay between making a change and observing an effect.
My system is a Mac Mini with 8GB and 24TB of RAID storage on Firewire.
It hosts home directories, e-mail, wiki's, etc for my wife & kids. All data is on the Mini so the other macs at home are bare except for OS and Apps.
This upgrade has caused more trouble than all other system upgrades I have ever done. It is making me think seriously about making another stab at LDAP/OD on Linux for my home server.

You might want to take a look at the much more functional AirPort Utility 5.6 for Mac OS X Lion on a "test" Mac to see if that works better for you. Oddly, 5.6 was released on the same day as AirPort Utility 6.0.
You can keep both 5.6 and 6.0 on a Mac (You cannot delete 6.0).

Mountain Lion download problems with Lion 10.7.5 (no VirusBarrier issue)

I have a mid-2009 Macbook Pro. From the factory it came with Snow Leopard but has since been upgraded to Lion OS X 10.7.5. I do not have VirusBarrier, I am writing from a recently clean-installed Lion.
I have now been troubleshooting my Mac for several days. When I wrote first, I had an issue with Safari having been damaged and so I wasn't able to reinstall Lion - but after a certain extremely helpful community member I finally succeeded in installing Lion.
But the issues with the App Store still persist. All my Mountain Lion downloads fail, getting the error message "can't verify, might be corrupted" what many here have also been getting. However, most solutions were related to VirusBarrier (which I don't have), or /var/folders errors (Console does not show any var-related errors).
So if it's not a var-related issue, or related to firewalls or virus softwares (I have disabled the Firewall and I have no virus software installed), what could it be?
When the download and install of ML failed last time, Console showed the following messages:
11/30/12 11:54:44.617 AM com.apple.SecurityServer: Failed to authorize right 'system.install.app-store-software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [235] for authorization created by '/System/Library/CoreServices/Software Update.app' [567]
11/30/12 11:54:44.617 AM com.apple.SecurityServer: Failed to authorize right 'system.install.software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [235] for authorization created by '/System/Library/CoreServices/Software Update.app' [567]
11/30/12 12:25:49.252 PM authexec: executing /Applications/Install OS X Mountain Lion.app/Contents/Resources/InstallAssistantTool
11/30/12 12:26:17.178 PM Install OS X Mountain Lion: Stopped operation queue with Error Domain=IAErrorDomain Code=101 "This copy of the Install OS X Mountain Lion application can't be verified. It may have been corrupted or tampered with during downloading." UserInfo=0x7f93aad17ee0 {IAErrorAlternateAction=App Store, NSLocalizedRecoveryOptions=(
Cancel,
"App Store\U2026"
), NSLocalizedRecoverySuggestion=Delete this copy of the application, and go to the Purchases page of the Mac App Store to download a new copy., NSRecoveryAttempter=<IARecoveryAttempter: 0x7f93aab1e1d0>, NSLocalizedDescription=This copy of the Install OS X Mountain Lion application can't be verified. It may have been corrupted or tampered with during downloading.}
...and a bit later, upon re-starting the download:
11/30/12 12:29:40.515 PM com.apple.SecurityServer: Failed to authorize right 'system.install.apple-software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [817] for authorization created by '/Applications/App Store.app' [781]
11/30/12 12:29:40.547 PM com.apple.SecurityServer: Failed to authorize right 'system.install.software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [817] for authorization created by '/Applications/App Store.app' [781]
Problem elimination:
* I don't think this is a router-related issue: I have downloaded and installed other softwares outside App Store successfully
* As said, I don't think this has anything to do with Firewall or Virus settings
* Nor has this anything to do with /var/folders as far as I can tell
What I've tried so far:
* Repaired disk permissions several times
* Rebooted
* Restarted App Store
* Following one advise found on the net, I deleted preflight.pfpkg just in case
* All the time I have made sure my OS has the most recent Software Updates installed (most of them downloaded successfully, while with Safari and OS 10.7.5. I had to try several times before they were downloaded succesfully)
I just reinstalled my OS X Lion, only to use it to jump on to Mountain Lion - so I am pending my migration until ML is installed. I would like to fix this soon, since I'd like to get the migration done and my real work started. I would really appreciate your help.
I'm not very adept at using Console or Terminal to troubleshoot, so if someone could guide me through the problem identification, that would be great. Unless someone already knows exactly what's going wrong and can show me a working solution - that'd save my day!
Thanks!

In cases like this, if you have an Apple store near by, they will most likely install the OS free of charge for you, if you can't bring your Apple ID along to prove you've paid for it.
Would that work out for you?

Significant slowdown of Time Machine after upgrade to Lion; indexing problem

After upgrading to Lion over the weekend I notice a significant slowdown of Time Machine processing. I assumed the first backup or two would take some time but it's been a couple of days. The process always hangs up at the "Indexing backup" stage. It takes a couple of hours to finish.
I found several threads relating to slowed down backups on Lion, most seem to hang at the "Preparing" stage (not the same symptom) but I did find some good diagnostic pointers. I installed the widget to see what kind of messages were being produced and found a few dozen "Waiting for index to be ready (100)" messages at the end of the stream. Further research - this is not a good thing :-) It seems a couple of such messages can be ok, but this many usually indicates a problem. I'm going to discount the possibility of a hardware failure because everything was perfectly fine up to the point I made the upgrade. Plus the prepare and copy seem to proceed at the expected speed (I watched the most recent cycle just to be sure).
Here is the full message log (it's still running at the moment):
Starting standard backup
Attempting to mount network destination URL: afp://Paul%[email protected]/Paul%20DiMarzio's%20Tim e%20Capsul
Mounted network destination at mountpoint: /Volumes/Paul DiMarzio's Time Capsul using URL: afp://Paul%[email protected]/Paul%20DiMarzio's%20Tim e%20Capsul
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Paul DiMarzio's Time Capsul/Paul DiMarzio’s MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
12.15 GB required (including padding), 490.69 GB available
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
I further found the advice and instructions on how to run the disk utility on the sparsebundle. I did a verify and repair, and the results came back that the drive appears to be ok (it did not say that it explicitly repaired anything).
But the problem remains.
I use a 1TB Time Capsule with plenty of free capacity (only half full). The TC and my MacBook are both hardwired into the home network, networking speed has never been an issue.
I'd sure hate to delete the backup file and start from scratch, there's over a year's worth of data there and I have, occassionally, wanted to go in there and pick up a downlevel or subsequently deleted file.
Any advice on other diagnostics or repair options to take? Thanks!
Paul

After posting I decided to keep trying to slog my way through the troubleshooting guide. Some of the steps are beyond my understanding but I did follow the advice in #D2 to delete the .Spotlight-V100 file from the sparsebundle. That action does seem to have done the trick, the backups are now completing in normal time. I ran a couple just to be sure. I've verified the backups with BackupLoupe and entered the Time Machine, all appears to be in order and as expected. The only odd side effect is that the backup volume is no longer ejected after completion but that might just be an artifact of all my mounting/de-mounting and playing with Finder. Anyway a very small price to pay for what looks to be a working system again.
Hopefully the good behavior will last through a few days and a few reboots :-)
ps - if you're reading this and don't know about the troublshooting guide it's here: http://web.me.com/pondini/Time_Machine/Troubleshooting.html (thanks pondini)

Lion text problem: Some text does not display properly in Safari and Firefox

Hello
Some text in Safari and Firefox is seriously degraded, making it useless. I changed to Firefox because Safari was displaying wrongly, but Firefox displays the same way, so it seems to be an OS problem. See image as an example:
I cannot see subtitles on BBC streamed movies, and the timing of the movies on the bottom ribbon do not display correctly.
I am using Lion 10.7.5
Is there a solution for this problem?
Thanks for any help.

Unbelievable (and I still cannot believe that) - is wmode="transparent/opaque/etc" - not supported by safari ? then how do you suggest we go about transparent flash elements on web pages? why isn't it working on safari while on every other browser on earth it does?

Upgrading OS Mountain Lion - Network problems

Dear all,
I've upgraded my iMAC last week-end. Good job
But... big network problem with ADSL connexion via ethernet
I've installed a CPL network at home because WI-FI range is blocked by big walls. Then no problem before (Modem Belkin connected on time machine and all devices (apple tv, Imac,...) linked by CPL).
WHen I've installed Moutain Lion, no more possibilities to connect throughout Ethernet (no DHCP renew).
Then I've reloaded a WIFI connexion. No problem at this time since this morning. I need to disconnect and reconnect the connection 4/5 times and It's no stable ?
Do you have an advice ? I really would like to find the stability of a CPL-Ethernet connection.
Thanks

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

LION PHOTOBOOTH PROBLEMS

Similar Messages

Maybe you are looking for