Lion problem with bootcamp diskutil and windows 7 help

Hi I have a problem with my imac 27th
I have installed Mac Osx 10.7.2 Lion
Processor 2.93 GHz Intel Core i7
Memory 12 GB DDR3 1333 MHz
ATI Radeon HD 5750 1024 MB
The serial number CK1160PBDNR
I have 3 partitions on the system
First MAC OS-500 GB on the system is mac
Second GAME 250 GB
Third Windows 250GB - there is prepared a partition for Windows 7
I wanted to install Windows 7 through Boot Camp, but the error appears:
This disk is not supported.
I went to tools and wanted to share a disk or partition manually podzilic but I have another error:
Disk Utility can not modify the disk: it contains physical volumes CoreStorage. Use diskutil command in the command line.
Also tried to do this with my USB lion, but it is the same.
Inadvertently create a new system, inadvertently waste the data. What do I do?

Thank you - I followed your directions
and found that I had already tagged it to watch, but hadn't realized that it was tagging both the old and the new. Big learning curve for me.

Similar Messages

Problem With Captivate 4 and Windows 8

Hi,
I've a problem with Captivate 4 on Windows 8 projects :
The mouse is not tracked.
I've applied the last patch for this version (11/15/2011).
Is there another patch for this ?
Thanks a lot.

Hi there
I know this will come off as sounding snarky, but please know it's honestly not intended that way,
Windows 8?
I never was able to make Captivate 4 run successfully on Windows 7. So I'm not the least bit surprised to hear it has issues with Windows 8!
Personally, I'm thinking you are due for an upgrade to Captivate if you want it to work on Windows 8. But then again, I'm not even certain if Captivate 6 is Windows 8 compatible.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Problems with captivate 8 and windows 8

I´m using captivate 8 and windows 8, and I am having problems with the visualization and publication of my projects. For visualization, there is a message of an error with syntax of the files ou directory, and nothing happens. For publication, I can´t see the project published in the browser. It opens only a text file, with the codes. Is there anyone thar can help me with that?

Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

Problems with Acrobat 8 and Windows 7 64 bit

Hi all
I need help with Acrobat 8 and Windows 7.
During the installation I'm asked to locate the file AdobePDF.dll on the disk. Selected the file in C:\Program Files (x86)\Adobe\Acrobat 8.0\Acrobat\Xtras\AdobePDF\AMD64.
The installation finishes without any other problem.
The problem arises when I want to create a pdf from a Word document. I'm using Office 2007. When I select he option to create a pdf from a file, I get message in the attached image.
If I try to used the Adobe PDF printer from within Word, nothing happes. The small printer icon apprears in the Windows task bar, but that is all. If I double click on the icon, I can see the print job, but that's all. There is no dialog box that asks me to save the file.
Assistance will be apppreciated.

Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

Problems with shutdown, expose and window switching

Hi there,
Recently I've been having a few issues with OS X. First of all it wasn't shutting down properly -- the menu bar would disappear and it would look like it was going to shutdown, but it never did. I could move down to the dock (on auto-hide) and it would re-appear, at which point I can bring up a terminal window and use 'shutdown' to do the job. On startup I'd reset the PRAM, and then do a disk-check, but the problem keeps coming back.
Subsequently, I've also been having problems with expose and switching windows (i.e. command-tab). Namely, neither of them work. Expose won't fire from either hot corners or the keyboard, and if I re-launch the app from the Apps folder (without trying to kill it first, I should say), it does nothing. Cmd-tab gets interpreted as just tab, and the keyboard shortcut for dashboard also fails (although I can start the dashboard from the dock).
I read in another post about an invalid jpeg in the downloads folder being able to cause the Expose problem (seems like a most unlikely bug?). Anyway, I cleared all pictures from my downloads folder and functionality came back, but now it's gone again. It's really very frustrating as it makes moving between windows a lot more hassle.
Any thoughts would be gratefully received.
TIA,
Mat

This sounds interesting.
Can you post a copy for the rest of us to see?
As for actually helping you, and not just satisfying our curiousity, if you start cutting pieces of the code you will probably end up finding the source of the problem (and we won't have too big a program to handle). Since DSC is a likely suspect, you may want to start there.
Also, are you creating an installer and using that to install? If not, you may wish to try that.
Try to take over the world!

Problem with remote control and Windows 7 - HP Pavilion 6301eu

I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

Problem with K9N Ultra and Windows 7!!

Hello,
I have the following system:
- K9N Ultra (MS7250 - Version:2.0)
- AMD Athlon 64 3500+
- 4x Kingston KVR533D2N4/512
- NVIDIA GForce 7300GS
- Seagate Baracuda: ST3120827AS (7200rpm)
- NEC DVDRW ND4571A
I am running Windows XP SP3 but when I try to install Windows 7 (either 32 or 64 bit versions), when the system boots up, I choose to run from CD/DVD, the files are being loaded in the beginning but then the system is stuck in the next screen where it says Starting Windows with the green bar. I have left it for up to 90 minutes and it remains there, no change. I have tried with several different disks, always the same. I tried disabling legacy USB drivers, disabling on board audio, disabling USB and having a normal keyboard and mouse, always the same, no change whatsoever, the system halts at the same point every time.
Can someone please offer some help?

i tried once more, again disabling onboard audio, legacy, floppy, everything.....same thing, when the files are loaded and the screen goes at the green bar, the DVD spins down and halts there for ever.
i am really pissed with this problem. i have installed windows 7 in all of my computers and this is the only one that absolutely refuses for windows 7 to be installed!
hmm..what do you mean about the PSU? why would the installation of 7 have a problem with the PSU? 2 days ago i installed again windpws xp sp3 (just to see if they would install in contrast to 7) without a problem. i am really tired of changing keyboards, DVDs, taking RAM in and out etc to it...i could live without the need to take a PSU out of another pc and install it to that one, is there some BIOS fix for the problem you mention?
the bios is version 3.00 from what i read.
also..what is nvidia boot agent that is the fourth option of boot in my bios??

Problem with "watch folder" and Windows 7

I have just switched to Windows 7 and Elements 9 - so far things are working quite well, but I am having a problem with "Watch folder" It is watching my odf folder "My Pictures" but all my new photos are going into Libraries/Pictures and PSE9 won't let me add that to the watch folder section. I am afraid that if I ask PSE9 to Get Photos and Videos / From Files and folders I may get a whole buch of duplicates in my Organizer.
Any help would be appreciated.

Thank you - I followed your directions
and found that I had already tagged it to watch, but hadn't realized that it was tagging both the old and the new. Big learning curve for me.

Problem with Encore CS4 (and Windows 7, possibly)

Greetings:
Anybody else having this problem? First I'll get my system blood work out of the way. It's a brand new HP Pavillion.
Windows 7 Home Premium (64 bit)
8GB RAM
Over 700GB of FREE harddrive
Intel Core 2 Quad Q8300 @ 2.5 GHz
Video Chip Set: Intel G45/G43 Express Chipset
I have ensured that everything is updated. This includes:
All CS4 Applications
Windows 7
My Graphics Card Driver
My Display Driver
I have also updated the Roxio PX Engine to V4.18.16a. I had read on a forum that Encore uses this driver and it should be up to date.
OK, the problem, which I can reproduce with the simplest Encore project:
1.     Start Encore
2.     Create a new project - specify DVD - everything else id default.
3.     Create a timeline
4.     Import asset. It is a simple Standard Video AVI file, 720x480.
5.     Select timeline for editing
Here's what happens:
A) Monitor window behaves normally. I can click play and watch the imported video. Sound is fine, everything is fine. I can start and stop the play back freely. All is well.
B) Now, I can do a number of things to create the problem I am having. The simplest is to just go to the timeline editor, select the AVI asset that has just been there, running fine, and remove it from the time line. At this point, the monitor window's internal frame that used to represent the video view port area, disappears. By "disappears", I mean that the Monitor window goes to the background color which is used for empty, unused window regions. What had been there before was a jet-black frame representing the video view area
Now, if I go to the project window and re-select the AVI asset that I was just viewing and put it BACK into the timeline, the Monitor does not restore. If I play the timeline, the monitor is still blank, although I can hear sound.
In addition to this, I also find that Encore has slowed so that response to the simplest operation is extremely slow. It doesn't crash, although, it might if I hang around long enough - but I don't. If I shut down Encore and restart it, it will work OK until I start manipulating video assets again and then the same thing will happen.
I should mention that, yes, I have this new computer but I was using Encore on an older and much slower XP system with less memory and drive space and I had no trouble with encore. I should also point out that the AVI assets that I use to produce this problem are the same ones I had used successfully on the older system.
Is there anyone out there that would find this problem familiar? Anyone find a solution?
Thanks in advance to anyone that responds.
Mark Roberts
Toronto, Canada

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

Problem with ASUS laptop and Windows 8

Hii
I have a problem with my ASUS vivo LAPTOP. Its running on Windows 8 and going pretty well, but sometimes when I use the Google chrome browser and open multiple pages the computer freezes and does nothing which requires me to shut it down by long pressing
the power button.
The question is what is the problem and does this process of long pressing the power button to shut it down harm my computer Hardware or Software?

Are you sure the issue is happening only when you use Google chrome. Then, it is an issue with the browser. Remove chrome and then re-install and check if that fix the issue.
Regarding force shut down is only meant to be used in emergency situations. If the computer is forced to shutdown everytime, this can lead to formation of bad sectors in hard disk and reduce its life span.
Hope this helps.

Still having problems with UAG SP4 and Windows 8.1

Hello,
This must be one of many threads on this topic but I'm stuck.
Because of the incompatibility with 8.1 and UAG2010 we've updated to SP4. Now, out-of-the-box 8.1 no longer wants to install the client components via ActiveX. I can log in, but the client isn't compliant so not all functions are available.
I actually had to manually get the client components from our UAG server. After installing I compared the System Information window with that of my 8.0 / IE10 installation and the only difference is that I can't see the version of the Device Session Cleanup
and SSL Application Tunneling gives me a "red X" in 8.0 and says "not detected" in 8.1. I did notice some .NET 3.5 components missing in 8.1 so I installed those too.
Compatibility mode does not help and switching to IE9 mode using the developer console is a workaround, not a solution.
What am I not seeing here?

Hi,
maybe the same problem we've faced:
http://social.technet.microsoft.com/Forums/forefront/en-US/2e8d916f-d694-42de-a96f-ad2b8761775c/no-activex-uag-client-install-golden-bar-on-ie11-after-upgrading-to-uag-sp4?forum=forefrontedgeiag
Regards,
Chris

Various Installation Problems with Portege R100 and Windows XP

Hello,
i recently purchased a used Portege R100. It came without OS and i wanted to install XP SP2.
I know that restores only work with suited PCMCIA drives, but the HDD is formatted, so there is no recovery possible i guess.
Here are my problems:
- with my very old Freecom PCMCIA CD-Drive the Windows Setup CD is recognized and it starts loading XP drivers until it wants to start Copying the installiation files --> then I get the Windows Bluescreen with the 00x7 error (virus or driver)
- the same happens with my old W2k Pro installation disk.
- With the even older W98SE strange things occur too: The installation seems to work properly, but when it comes to boot with W98SE for the first time the systems hangs up with pixelgarbage.
- Making the 6 Bootdisks with makeboot did not work either.
- I also tried MS-DOS! And guess what! That worked! Loading the Freecom drivers and copying the Windows I386 folder to my hdd with volkov commander (something similar to NortonCommander) worked too! So i had hav the files on my disk but after running winnt in the i386 folder, the system hangs after a while, when it starts to copy files to a temporary folder.
So i nearly tried everything i know. right now i am downloading knoppix to try that.
I have run Memtest86 and the Diskmanager 9 to test RAM and HDD, both finished withut errors, so the main parts involed in the setup process seem to work. May it be that my IDE controller is broken?
I have no idea, WHY windows won't install!
Help is warmly welcome!!
Thanks,
Christian
Does

Hello
i fixed the problem:
The method of installing the i386 files to the DOS Disk and running winnt works. I was to impatient. Windows setup starts copying the files to a temporary folder. Nromally you see the info bottom right, waht files are copied at the moment. This is a good indicator that the system is still working.
My setup does not show waht files are copied to the temporary folder. But it still works. HDD is spinning all the time. Due to the "non-Sound" of the R100 i was sure it hung up. But it simly did not. After lets say 20 minutes, the setup process went on as usual....
Now i have XP in the R100 and all teh drivers installed. What a wonderfull notebook, really!
Thanks for the hints anyway...

Strange problem with AIX server and windows clients

I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
clients on windows. We have J2SE Swing application as a client.
If the client is w2k or XP, the first client gets good response. If I start
another client the second client is horribly slow (2 sec vs 16 sec). Even if
I kill the first client the second client continues to be slow. If I have 2
clients open together, the first one continues giving 2 sec response while
the second one continues with 16 sec. For that matter if I start another
client after shutting down first one I get slow (16 sec) response.
If the client is NT client I always get good and consistent response from
the server. Irrespective of how many client I have on the NT machine, I keep
getting good response. NT and W2K laptops are seating right next to each
other on the same n/w and infact the NT is a much slower and lessor memory
machine than W2K.
We did similar tests keeping server on Solaris or NT server or W2K server,
and the clients "behave" normally i.e I get consistent repsponse time (it
may be slow or fast, but it is consistent and is consistent b/w NT and W2K).
We even tried putting my laptop on the same network as the AIX server, but
it did not help. Unfortunately some of our clients will be using AIX and
W2K.
HELP!!!!

"Cameron Purdy" <[email protected]> wrote in message
news:[email protected]..
Sounds like a reverse DNS lookup or similar network timeout.Thanks for the suggestion, but then why would the first client on w2k or XP
get a better performance and the subsequent clients get worse performance?
>
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com/coherence.jsp
Tangosol Coherence: Clustered Replicated Cache for Weblogic
"vinay moharil" <[email protected]> wrote in message
news:[email protected]..
I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
clients on windows. We have J2SE Swing application as a client.
If the client is w2k or XP, the first client gets good response. If Istart
another client the second client is horribly slow (2 sec vs 16 sec).
Even
if
I kill the first client the second client continues to be slow. If I
have
2
clients open together, the first one continues giving 2 sec response
while
the second one continues with 16 sec. For that matter if I start another
client after shutting down first one I get slow (16 sec) response.
If the client is NT client I always get good and consistent responsefrom
the server. Irrespective of how many client I have on the NT machine, Ikeep
getting good response. NT and W2K laptops are seating right next to each
other on the same n/w and infact the NT is a much slower and lessor
memory
machine than W2K.
We did similar tests keeping server on Solaris or NT server or W2Kserver,
and the clients "behave" normally i.e I get consistent repsponse time(it
may be slow or fast, but it is consistent and is consistent b/w NT andW2K).
We even tried putting my laptop on the same network as the AIX server,
but
it did not help. Unfortunately some of our clients will be using AIX and
W2K.
HELP!!!!

Compatiblity problem with cs 5 and windows 8?

Is there any compatibility problems with indesign cs 5 and windows 8? Its very choppy on my computer. Its a windows 8 laptop with 32 gb of ram and 2 tb disk space. It shouldn't be a problem with lack of resources. I was wondering if there is anything i can to to make it less choppy. Also the scroll bars on the side and bottom won't scroll I need to use the space bar which is fine but can be annoying at times. Sometimes the side menu boxes wouldn't work correctly sometimes they will. I tried to reinstall the program and it didn't change anything. I also tried using the windows troubleshooting where you can tell the computer to use old settings for older programs. Once in a while it'll also crash. Indesign works great on my windows 7 desktop. I didn't know if there was a preset or something that might help resolve the issues. I can use the program but I have to fight with it so much sometimes its not worth using on the laptop. thanks

I didn't even try to install CS5 on Win 8. The only thing I have on my desktop and laptop is CS6.
I did read someone having problems with scrollbars but that was on a Surface Pro tablet.
Bob

[T410] discrete gfx - Problem with Video Card and Windows Aero -anyone using 4Gb memory modules?

[3/3/2010 Update]
There's a issue of using 4Gb sticks on T410 currently that results in video output artifacts and aero interface problems when using Lenovo supplied drivers v8.16.11.8825. I think I can call it confirmed (Three people including me face this issue).
Possible workaround is to install modified EliteBook 8440p video driver (read along this thread) comes with a BIG drawback of not being able to change brightness level within Windows 7. To sweeten it a little bit - you can set luminance level at POST screen, when computer boots up.
[Original Message]
Encountered strange behavoir of my T410.
I have a T410 with 256Mb of Video Memory and 1440x900 display, a T61 with 128Mb of Video Memory and 1400x1050 dsplay and external monitor HP w2338h with 1920x1080 resolution.
If I connect external monitor to my T410 and launch Visual Studio 2010 Beta 2 - image blinks and comes back with Aero disabled. Looking through event logs reveals the lack of memory. Entry information can be found further.
Now If I do the same with my old Thinkpad T61, connect the same monitor using the same cable - I can open as many Visual Studio 2010 Beta 2 instances I like (tried 5) and nothing blinks and Aero stays enabled.
Actually I find ridiculous, a notebook with more VRAM cannot archive the same performance as notebooks with less.
Does anyone know what path should I pursue to solve this issue?
UPDATE: Simply running multiple instances of Visual Studio 2010 Beta 2 without external monitor causes Aero disabled as well.
Log Name:      Application
Source:        Desktop Window Manager
Date:          2/4/2010 7:32:21 PM
Event ID:      9020
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
The Desktop Window Manager has encountered a fatal error (0x8007000e)
Error 2/4/2010 7:32:21 PM Desktop Window Manager 9020 None
Solved!
Go to Solution.

mat3y wrote:
I have the same problem with T410 and aero disabled. I am not using VS and I get this error anyway.
The Desktop Window Manager has encountered a fatal error (0x8007000e).
This must be buggy drivers, on Lenovo download site is just the one and the only initial driver for T410 graphics card.
What software were you actively using when this error occured?
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

Lion problem with bootcamp diskutil and windows 7 help

Similar Messages

Maybe you are looking for