Lion Recovery Mode shuts down when trying to start it.
When I start recovery mode (in verbose) I get 'proc 98: load code signature error 9 for file "securityd"' among other bugs/errors. See attached image.
With this I am unable to get into recovery mode. Booting and holding cmd+r/option will allow me to start the boot into recovery mode. I've also tried using the recovery assistant to put it on a external drive, but to no avail.
MBP15" Early 2011. It does have a firmware password (which I cannot remove due to the inability of getting in recovery mode).
After toyin around a bit more, I managed to attempt to mount the boot dmg on the RHD. The follow happened:
This confims to me that my boot dmg is corrupted. However I wanted to rule away the option of the firmware password, and hence mounted the dmg with no verification. Using this I was able to sucessfully remove the firmware password. After rebooting I got indeed not prompted for a password when holding alt. The problem with my RHD however persisted.
Similar Messages
-
Unexpected shut down when trying to start from a osx cd or dvd
I cant startup from an osx cd or dvd. Ive even tried a norton utilities disk and I can boot in 9 but not osx. i have both original panther cds and tiger dvd. the machine has 9.2 and 10.1 and runs fine on both systems. but i cant get the install cds or dvd to work. When booting of the cd/dvd i get the gray scree with the apple and then the blue screenwith the spinning cursor the the computer shuts down. The shutdown is the fastest with the tiger dvd and longest with the panther cd.
As for firmware, check http://docs.info.apple.com/article.html?artnum=86117.
Reset the machine's defaults. Restart the machine booting into Open Firmware (holding down these keys until you get a text screen: OPT+ CMD + O + F). Then, enter these commands, following each with hitting the return key:
reset-nvram
set-defaults
reset-all
For details, see http://docs.info.apple.com/article.html?artnum=60285. Note that, although the article is an overview for network servers, "most of the information included applies broadly to all PCI Macintosh systems" and is, IMHO, their definitive guide to Open Firmware and I recommend its perusal.
If that works, you might have to reset some System Preferences. -
Palm Desktop shuts down when trying to view calendar by month
I'm using a Palm TX with the latest edition of Desktop installed (I think that's 6.2). Everything is normal except, suddenly, I cannot view my calendar in monthly view. Daily, weekly and yearly all work fine. Desktop shuts down when trying to view in monthly view. I did a system restart, a Desktop reinstallation, a download of the latest version and installation of that version and, finally, uninstallment of the existing Desktop, download of the newest version and installation of that version. Nothing seems to enable me to view the calendar in monthly view. This is a spontaneous event. I've been running Desktop on a Vista Ultimate system since February without incident. I have no idea about how to solve this.
Thanks
Post relates to: Palm TXWell, here's where we are now. It's a good thing that I have desktop on my office computer because when I tried a Hotsynch with my home desktop, Hotsynch wiped out all the data on my handheld and then hung up both the handheld and desktop in the middle of the Hotsynch. I'm going to overwrite the entire handheld with the office desktop file. As for the home setup, I'm thinking the only thing I can do now is uninstall Palm and wipe out the entire directory of files. Am I correct about this? Do I need to do a clean uninstall?
Post relates to: Palm TX -
Adobe Photoshop CC shuts down when trying to open a file or save it!
Adobe Photoshop CC shuts down when trying to open a file or save it. I'm running windows 7 professional and have tried unistalling/reinstalling preferences but does not work. I will list the events logs for help in seeing what I need to do to make this work. Please help!
This is the first of 2 errors listed associated with photoshop cc.
Log Name: Application
Source: .NET Runtime
Date: 10/12/2014 9:52:29 AM
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Owner-PC
Description:
Application: Photoshop.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.TypeInitializationException
Stack:
at P1.WICCODEC.CODEC.ImageCoreBasedDecoder..ctor(System.Runtime.InteropServices.ComTypes.ISt ream, System.String)
at P1.WICCODEC.CODEC.WICBitmapDecoder.CreateICDecoder(System.Runtime.InteropServices.ComType s.IStream)
at P1.WICCODEC.CODEC.WICBitmapDecoder.QueryCapability(System.Runtime.InteropServices.ComType s.IStream, UInt32 ByRef)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-12T14:52:29.000000000Z" />
<EventRecordID>62867</EventRecordID>
<Channel>Application</Channel>
<Computer>Owner-PC</Computer>
<Security />
</System>
<EventData>
<Data>Application: Photoshop.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.TypeInitializationException
Stack:
at P1.WICCODEC.CODEC.ImageCoreBasedDecoder..ctor(System.Runtime.InteropServices.ComTypes.ISt ream, System.String)
at P1.WICCODEC.CODEC.WICBitmapDecoder.CreateICDecoder(System.Runtime.InteropServices.ComType s.IStream)
at P1.WICCODEC.CODEC.WICBitmapDecoder.QueryCapability(System.Runtime.InteropServices.ComType s.IStream, UInt32 ByRef)
</Data>
</EventData>
</Event>
Second Error
Log Name: Application
Source: Application Error
Date: 10/12/2014 9:52:30 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Owner-PC
Description:
Faulting application name: Photoshop.exe, version: 14.2.1.570, time stamp: 0x52f4a1d7
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x531599f6
Exception code: 0xe0434352
Fault offset: 0x0000812f
Faulting process id: 0x16c8
Faulting application start time: 0x01cfe62c123b9d8e
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC\Photoshop.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 633cd65f-521f-11e4-a63f-001cc0725d07
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-12T14:52:30.000000000Z" />
<EventRecordID>62868</EventRecordID>
<Channel>Application</Channel>
<Computer>Owner-PC</Computer>
<Security />
</System>
<EventData>
<Data>Photoshop.exe</Data>
<Data>14.2.1.570</Data>
<Data>52f4a1d7</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.18409</Data>
<Data>531599f6</Data>
<Data>e0434352</Data>
<Data>0000812f</Data>
<Data>16c8</Data>
<Data>01cfe62c123b9d8e</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CC\Photoshop.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>633cd65f-521f-11e4-a63f-001cc0725d07</Data>
</EventData>
</Event>The first error has nothing to do with Photoshop - that's some .NET application.
The second error is most likely connected to a third party plugin or driver.
And you're running Photoshop CC (14.x) instead of the current Photoshop CC 2014 (15.x). -
Computer shuts down when trying to create or open a pdf file
My computer shuts down when trying to create or open a pdf file.
In that case, you need to update the Acrobat Version at your end. Click on Help -> Check for Updates. Download and install the updates. Make sure your version is 9.5.1
-
Iphoto shuts down when trying to import scanned photos
Iphoto shuts down when trying to import scanned photos
What colour profile are these images?
Post the first 50 lines only of the crash report
Regards
TD -
CS4 Products shutting down when trying to print
Has anyone had a problem with CS4 shutting down when trying to print
Nobody can tell you anything without proper system info or other technical details. We know nothing about your system, your printer, your print settings or for that matter from which CS4 app you are actually trying to print.
Mylenium -
Soundtrack Pro Shuts down when trying to fix analized Action
Soundtrack Pro Shuts down when trying to fix analized Action
Thanks, I'll have to give that a try if there isn't an easier answer out there somewhere. If I pull the card will I have to reload the software and drivers?
If my project is saved and I have a copy of the project saved will I be able to reload Adobe without losing anything? What I mean is will I be able to just import my whole project once reloaded?
I just don't understand what could have happened, since I was doing this with no problem a couple of days ago.
Thanks for your help, it's greatly appreciated.
Tim -
ITunes shuts down when trying to play video
My iTunes software shuts down when I try to play a video from my iTunes Library or from the iTunes Store site. I have backed up the library and have tried to reinstall iTunes, but when I did the entire library reappeared and the same problem exists. My Quicktime does work and iDVD, too, with home movies, other online streaming and DVDs, So I'm sure that the problem is with iTunes.
IBook G4 Mac OS X (10.4.8)I upgraded Quicktime and now it works.
IBook G4 Mac OS X (10.4.8) -
Why is iChat shutting down when trying to video-conference with Windows?
My friend and I are trying to video-conference.
I use an iBook G4, with an iSight.
My friend uses a HP Pavilion ZV5000.
For some reason, my iChat shuts down when it's connecting.
It'll connect for one second and then, my iChat will close.
I don't see what's wrong :(!
Help me, please!
iBook G4 Mac OS X (10.4.8)Hi Bill,
Yes I saw that kellyRAWR mentioned that they were using AIM.
And Tony explained about the AIM 5.9 issue.
I was merely offering another option that she may not know about, since the AIM->iChat is flaky at best.
Respectfully,
SimplyMac. -
Laptop shuts down when trying to connect
Bought a WRT110, installed software, and everytime the router and the wi-fi on my laptop are turned on, the laptop shuts down and restarts. Anybody have this problem before?
I have the same problem. I just installed a new WRT160N on the desktop but my Toshiba M35x-S311 shuts down when I switch on the wireless connection. What's going on?
-
Mail Shuts Down when trying to Open Email with movie
Just recently Mail is shutting down when I try to open an email with attached movie. When I mail again, the email is still there with the blue dot.
I found one document suggesting a Java..Cocoa plug in may be the culprit but no luck.
Any ideas?
Any assistance very much appreciated.Am I the only one having troubles with Apple Mail?
As I said, when I go to open an email that has a movie (.wmv) attached it shuts mail down. Must be a record if I am the only one encountering this problem.
Any one? Any ideas? -
Illustrator and Indesign Shutting down when trying to print?
Wondering why my illustrator and indesign is shutting down when I try to print from those programs. I don't even get to a printing menu. Just got a new mac....Mac OSX 10.7.3 and using the same Creative Suite 4 I used on old machine and never had this problem....is it the newer operating system? What can I do?
Remove the following files and back them up:
[Hard Drive]/Library/Printers/PPDs/contents/Resources/en.lproj
[Hard Drive]/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj
[Hard Drive]/Library/Printers/PPDs/contents/Resources/Ja.lproj
[Hard Drive]/Library/Printers/PPDs/contents/Resources/ko.lproj
[Hard Drive]/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj -
Until a few weeks ago I have never had a problem opening more than one pdf at a time. Now Reader just shuts down when I try to do so. The same thing happens when I click on the yellow highlighted categories in settings. All the other categories open fine.
Appreciate the help of anyone who can help me solve this.I guess you didn't know, but yes you can close more than one app at a time. You can close up to 3 apps at a time in the new IOS7 on the iPhone. Try opening at least 3 apps and then double click the main button to see what apps are opened. Then swipe to the left to see the three of them on your screen. Your not gonna see the ones on the side entirely but you can still put all three fingers on them, then simply swipe them up and it closes them up.
The thing is, when you have let say 10 apps open, and you start using this trick, some of them will stay open meaning you swiped them up to close them down but the bottom icon stays there. When you come back to your main IOS desktop and then go back to close the programs that you have opened, you can see that those apps are still opened. There is only like 2 or three out of all the 10 you had opened that stayed open, but none the less it's a bug in the system I presume.
You also asked about the icon at the bottom. When you are seeing what apps are opened, there is always a small icon at the bottom and on top you have a representation of what you were working on, and that is the part you swipe up. But often time the bottom icon will stay opened after swiping 2 or 3 of the apps to close them. -
IPad shuts down when I open Facebook, articles on CNN, newspaper articles, various videos. Many thanks
Hi The apps, are now needing, more power from ipad that why you have problems If you can a good buy, is the iPad Air 1 was £479.00 now £359.00 For 32G Cheers Brian
Maybe you are looking for
-
Running more than one instance of the database on oracle 9i
I have a oracle 9i database on linux 8 . I had created a database db1 . Its working fine then i created another database db2 on the same server. When i am trying to start the database with the command sqlplus /nolog sql> set instance db2 it gives err
-
How to connect 3 DVD recorders in MSI 915P
I have a MSI 915P motherboard (MS-7058) e i just can connect up to 2 dvd recorders to IDE1... if i connect one more recorder to IDE2 or IDE3 the computer do not "see" this new dvd recorder... anyone can help me? Does this have to do with IDE2 and IDE
-
I'm trying to record in GB using a new 20" iMac, a dynamic Audix OM5 microphone, and the Griffin XLR to 1/8" cable. GB will not let me switch between built-in and line-in on the preferences. What do I need to do? Also, do I need a preamp?
-
Help me in tab strip with table control
hi, can any body give me the idea regarding my requirment please urgent. my requirment is i created tab strip in main screen (111) and i created table control in subscreen (12).and i created one parameters with gui screen.if i execute that selectio
-
Solaris releases supported?
I am working on an issue where we need to run old releases of Solaris 10 in order to test our application. We were led to believe that since the hypervisor abstracts that hardware from the OS that we could upgrade our hardware and still run an older