Lion ScreenSaver re-active hang during read my iPhoto pictures

Hi,
My Lion cannot display password logon during screensaver is reading my iPhoto pictures.
Because I setup my screensaver to random display my iPhoto pictures.
I have an external monitor with my MacBook. Both of my monitors will display iPhoto pictures with screensaver.
Screen hang if i'd like to re-active from screensaver to normal operation mode.
That will be fine if screensaver reads iPhoto pictures and start to display them.
Hang status happen during screensaver still reading iPhoto pictures for 2~3 seconds and before display them.
Please check what's happen with this kind of issue for current Lion OS X 10.7.3
Many thanks

Hi Mike,
I just saw this post and saw no one has responded. You might have figured out but in case, I wanted to let you know what I found out. I had the same problem. Hard drive failure, they installed a new one and my iPhoto pictures were missing. I couldn't find them on Time Machine either which baffled (and frustrated) me b/c I just backed up my drive and I was missing pictures from over a year ago.
I found this article and it allowed me to at least find my pictures...so they weren't lost after all.
https://discussions.apple.com/message/16029742#16029742
As for why they aren't showing up in iPhoto or Time Machine, the lady at the Mac store said it is probably an OS conflict. Which makes sense since I can see the actual pictures in the iPhoto content file (per the article mentioned above). However, I didn't have my computer with me at the store to have a Genius person help me resolve the conflict.
BUT, if you can find the pictures, then maybe you can reimport them into iPhoto? Just a thought.
Good luck!

Similar Messages

Mountain Lion 10.8.2 reset during apps update (iPhoto 9.4, Aperture 3.4.1, Xcode)

I'm experiencing a lot of troubles, after Mountain Lion automatic update.
system during apps update such as iphoto 9.4, Aperture, etc, freeze, screen become white, then retart automatically.
Even today during my new iphone 5 installation made the system reset by itself. Quiet unusual for a Mac, especially this new Retina display.
My configuration,
Mac Book Pro Retina Display 15" - i7 2,6 - 16GB Ram, 768 Gb SSD
Intel HD4000
Nvidia GT M650
Can anybody help me to get out of this big issue? FYI, I rein stalled Mountain Lion manually, downloading the file from Apple website.
Thanks
Steve8869

Welcome to Apple Support Communities
http://support.apple.com/kb/HT3964

Background File Activity Hangs

I've about had it with Dreamweaver because of this one single
problem. If I restart my system and open Dreamweaver, I can work
for a few minutes or an hour, or a few seconds, or a whole day, but
at some point along the way, guaranteed, Background File Activity
hangs during a PUT function or a Save (automatically put) function
and the resulting file on the server corrupts itself and reads a
zero length.
This is particularly annoying because it screws up my site's
styling...GRRRRR.

Just guessing here (I haven't experienced this), but does it help to rebuild your site cache? Site->Recreate Site Cache
Or, commonly these days, follow the steps for removing a corrupted cache file here: http://forums.adobe.com/thread/417116
Note that it may take some time to rebuild the cache if you have a lot of files in your site(s). Perhaps longer if the local files are on a different computer (LAN).
Mark A. Boyd
Keep-On-Learnin' :-)
This message was processed and edited by Jive.
It shall not be considered an accurate representation of my words.

Adobe reader 11 Hang during 1-2 minutes when opening a file

Hello,
We are very unhappy with Acrobat Reader. We have Some Hangs/Crash into us computers.
With adobe acrobat reader upper tan 11.0.3 hang when start (open a file) during... approx 2 minutes. During the Hang, Acrobat Reader be unresponsive.
I tried to change the protected mode. change nothing. I can saw is when Acrobat Reader start the Tools Menu (for me).
I tried to completely uninstall(registry and folders cleanup too) and do a fresh install, changed nothing.
If we use 11.0.3 or 10.0.X, we don't have problems.
Maybe the UTM firewall block something ?
I need help, why i think we going to use Foxit if we don't fund the problem.
Best Regards
Vincent

Hello,
No, i checked. I bypassed the UTM Firewall and do same.
Yes, I can contact the cloud.acrobat.com, with or without firewall.
I bypassed the Anti-Virus, same problem.
I unchecked the "enable protection mode". Same.
I modified the registry to be like this :
64-bit:
Keypath:          HKLM\SOFTWARE\Wow6432Node\Policies\Adobe\Acrobat Reader\11.0\FeatureLockDown
Value name:   bProtectedMode
Value type:     REG_DWORD
Value data:     0
32-bit:
Keypath:          HKLM\SOFTWARE\Policies\Adobe\Acrobat Reader\11.0\FeatureLockDown
Value name:   bProtectedMode
Value type:     REG_DWORD
Value data:     0
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\11.0\IPM]
"bDontShowMsgWhenViewingDoc"=dword:00000001
"bShowMsgAtLaunch"=dword:00000000
I saw one way to investigate !    We got a shortcut here (power injection tests) and the network switch goes off. During the network was disconnected, the Reader work. (Only a little hang of 1-2 seconds during opening file instead the 3-5minutes Hang ). I successfully reproduce them simply with disable the network card.
Please Adobe Team : Help me to investigate, to debug.
I saw nothing bad with ProcessExplorer. I do a minidump.
Which tool I can use to understand ?    Wireshark ?

Sessions/connections gets hang during update and select operations.

A table with 3 million records, which has customer details data.
Everyday application is executing select and update queries on that table.
Sessions/connections gets hang during update and select operations.
After checking ADDM report, following are the findings:
Please suggest the solutions
Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 145.22 active sessions, 99.77% of total activity.
SQL statements were found waiting for row lock waits.
Recommendation 1: Application Analysis
Estimated benefit is 145.22 active sessions, 99.77% of total activity.
Action
Significant row contention was detected in the TABLE
"AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
row contention in the application logic using the given blocked SQL.
Related Object
Database object with ID 82155.
Rationale
The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The session with ID 50 and serial number 34525 in instance number 1 was
the blocking session responsible for 100% of this recommendation's
benefit.
Symptoms That Led to the Finding:
Wait class "Application" was consuming significant database time.
Impact is 145.22 active sessions, 99.77% of total activity.
Finding 2: Top SQL Statements
Impact is 46.39 active sessions, 31.87% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
Recommendation 1: SQL Tuning
Estimated benefit is 46.39 active sessions, 31.87% of total activity.
Action
Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
possible performance improvements. You can supplement the information
given here with an ASH report for this SQL_ID.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The SQL spent only 0% of its database time on CPU, I/O and Cluster
waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
Look at performance data for the SQL to find potential improvements.
Rationale
Database time for this SQL was divided as follows: 100% for SQL
execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
execution.
Rationale
SQL statement with SQL_ID "974vg65j29pmv" was executed 212 times and had
an average elapsed time of 2494 seconds.
Rationale
Waiting for event "enq: TX - row lock contention" in wait class
"Application" accounted for 100% of the database time spent in
processing the SQL statement with SQL_ID "974vg65j29pmv".

**addm report **
          ADDM Report for Task 'TASK_7526'
Analysis Period
AWR snapshot range from 5003 to 5004.
Time period starts at 08-JUL-13 11.00.27 AM
Time period ends at 08-JUL-13 12.00.45 PM
Analysis Target
Database 'AVAYADB' with DB ID 2878789264.
Database version 11.2.0.1.0.
ADDM performed an analysis of instance avayadb, numbered 1 and hosted at
NG-LA04AVAYA01.
Activity During the Analysis Period
Total database time was 563062 seconds.
The average number of active sessions was 155.63.
Summary of Findings
   Description         Active Sessions      Recommendations
                       Percent of Activity
1 Row Lock Waits      155.44 | 99.88       1
2 Top SQL Statements 26.67 | 17.14        1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 155.4 active sessions, 99.88% of total activity.
SQL statements were found waiting for row lock waits.
   Recommendation 1: Application Analysis
   Estimated benefit is 155.44 active sessions, 99.88% of total activity.
   Action
      Significant row contention was detected in the TABLE
      "AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
      row contention in the application logic using the given blocked SQL.
      Related Object
         Database object with ID 82155.
   Rationale
      The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
      Related Object
         SQL statement with SQL_ID 974vg65j29pmv.
         UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
         WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
   Rationale
      The session with ID 167 and serial number 6084 in instance number 1 was
      the blocking session responsible for 100% of this recommendation's
      benefit.
   Symptoms That Led to the Finding:
      Wait class "Application" was consuming significant database time.
      Impact is 155.45 active sessions, 99.88% of total activity.
Finding 2: Top SQL Statements
Impact is 26.66 active sessions, 17.14% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
   Recommendation 1: SQL Tuning
   Estimated benefit is 26.67 active sessions, 17.14% of total activity.
   Action
      Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
      possible performance improvements. You can supplement the information
      given here with an ASH report for this SQL_ID.
      Related Object
         SQL statement with SQL_ID 974vg65j29pmv.
         UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
         WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
   Rationale
      The SQL spent only 0% of its database time on CPU, I/O and Cluster
      waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
      Look at performance data for the SQL to find potential improvements.
   Rationale
      Database time for this SQL was divided as follows: 100% for SQL
      execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
      execution.
   Rationale
      SQL statement with SQL_ID "974vg65j29pmv" was executed 707 times and had
      an average elapsed time of 794 seconds.
   Rationale
      Waiting for event "enq: TX - row lock contention" in wait class
      "Application" accounted for 100% of the database time spent in
      processing the SQL statement with SQL_ID "974vg65j29pmv".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          Additional Information
Miscellaneous Information
Wait class "Commit" was not consuming significant database time.
Wait class "Concurrency" was not consuming significant database time.
Wait class "Configuration" was not consuming significant database time.
Wait class "Network" was not consuming significant database time.
Wait class "User I/O" was not consuming significant database time.
Session connect and disconnect calls were not consuming significant database
time.
Hard parsing of SQL statements was not consuming significant database time.

11gr2 client installation hangs during client installation

hi
11gr2 client installation hangs during client installation during "perform pre-requisit test"-- what to do??
server oel 5.6
db 11gr2
client 11gr2
os win xp prof 32 bit
java jre 6u24
netbeans 6.9.1
kind regards
Edited by: SYSAPPSDBATSM(EBZ11,R12)1152046c on Mar 25, 2011 3:40 PM

hi
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Get view named [InstallTypesUI]
INFO: size estimation for InstantClientinstall is 174.04894161224365
INFO: size estimation for Administratorinstall is 1046.229476928711
INFO: size estimation for Runtimeinstall is 754.2802858352661
INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@1cf243b
INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
INFO: InstallTypesPane installType is: InstantClient
INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Loading view <InstallTypesUI> at state <clientInstallType>
INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
INFO: size estimation for InstantClientinstall is 174.04894161224365
INFO: size estimation for Administratorinstall is 1046.229476928711
INFO: size estimation for Runtimeinstall is 754.2802858352661
INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Install Type set in InstallTypeUI is : Custom
INFO: Validating view at state <clientInstallType>
INFO: Completed validating view at state <clientInstallType>
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@a16157
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [en]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Get view named [InstallLocationUI]
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@ba8fce
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: C:\Documents and Settings\DBA\Desktop\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: true
INFO: isNewHome= true isORCAHome=false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from C:\Documents and Settings\DBA\Desktop\win32_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/C:/Documents and Settings/DBA/Desktop/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/Documents and Settings/DBA/Desktop/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1046.229476928711
INFO: PATH has :==>C:\DOCUME~1\DBA\LOCALS~1\Temp\OraInstall2011-03-26_10-46-45AM\jdk\jre\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Common Files\NetSarang;C:\Program Files\PC Connectivity Solution\;C:\app\DBA\product\11.1.0\db_2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\WinSCP\;C:\Program Files\QuickTime\QTSystem\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_YES_CUSTOM_YES
INFO: Verifying route INVENTORY_YES_CUSTOM_YES
INFO: Get view named [CustomInstallUI]
INFO: Re-loading component config bean
INFO: Loading beanstore from jar:file:/C:/Documents%20and%20Settings/DBA/Local%20Settings/Temp/OraInstall2011-03-26_10-46-45AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.commons.base.util.ComponentConfig from jar:file:/C:/Documents%20and%20Settings/DBA/Local%20Settings/Temp/OraInstall2011-03-26_10-46-45AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
INFO: Resolving dependencies
INFO: View for [CustomInstallUI] is oracle.install.ivw.client.view.CustomInstallGUI@1473a2e
INFO: Initializing view <CustomInstallUI> at state <clientCustomInstall>
INFO: Completed initializing view <CustomInstallUI> at state <clientCustomInstall>
INFO: Displaying view <CustomInstallUI> at state <clientCustomInstall>
INFO: Completed displaying view <CustomInstallUI> at state <clientCustomInstall>
INFO: Loading view <CustomInstallUI> at state <clientCustomInstall>
INFO: Completed loading view <CustomInstallUI> at state <clientCustomInstall>
INFO: Localizing view <CustomInstallUI> at state <clientCustomInstall>
INFO: Completed localizing view <CustomInstallUI> at state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientCustomInstall
INFO: Completed executing action at state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Custom Install Selection. map = {}
INFO: Validating view at state <clientCustomInstall>
INFO: Completed validating view at state <clientCustomInstall>
INFO: Validating state <clientCustomInstall>
INFO: Completed validating state <clientCustomInstall>
INFO: Verifying route TO_ENDCUSTOM
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is [email protected]77
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: C:\Documents and Settings\DBA\Desktop\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: dba-077754d77ea:C:\DOCUME~1\DBA\LOCALS~1\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:dba-077754d77ea
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:1.9906GB (2087276.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: dba-077754d77ea:C:\DOCUME~1\DBA\LOCALS~1\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:dba-077754d77ea
INFO: Expected Value:130MB
INFO: Actual Value:12.5322GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:dba-077754d77ea
INFO: Expected Value:32-bit
INFO: Actual Value:32-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:dba-077754d77ea
INFO: Expected Value:1023
INFO: Actual Value:235
INFO: -----------------------------------------------
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]kind regards

IPhone/iTunes sync hangs during "backup" phase

When I plug my iPhone into my Mac, a sync with iTunes starts. That's fine; what's not fine is that the synchronization always "hangs" during the "Backing up your iPhone" phase. If I click the little "X" on the iTunes display window, it proceeds fine, presumably skipping the backup phase of the sync.
How can I stop this from hanging during the synchronization?
Thanks.

I have been experiencing this problem lately as well. I've been using an Iphone for over a year now and this is a NEW problem in the last 30-45 days.
My Iphone takes over an hour and a half to complete the backup. It appears to be hung but is not.
I also just got off the phone with Apple Tech Support....yeah...that was a waste of time. Essentially, they told me that ALL the data on your iphone goes through the Itunes server across your active internet connection and the time can vary depending upon how busy the server is and how much data is on your Iphone.
Holly Crap!....who designed the architecture for this thing. I don't know about the rest of you, but I find this completely unacceptable. If this continues beyond September, I am switching to a Blackberry. When I connect my Iphone I don't expect to retire before the freakin thing finishes.

Mail hang during large message download

I've noticed several times when I get emails that either exceed the auto download size threshold, or have large attachments on them that Mail will 'hang' during the download. I can exit out of the message but it's still spinning away and won't get any more email from the server.
I'm using a Pop email account. The only fix I've found is to "magic power cycle" the mail app using the sleep button / home key hold down. Once mail starts after this the message will fully download. It's been happening for a while, but I wanted to be sure it wasn't a fluke.
Anyone else run across this & find an easier workaround?
Thanks,
Dave

I have been having no end of problems with email since upgrading to 10.5 about a month ago.
Generally, after some time, various activities hang around in the Activity window (such as "evaluating message n of m") and prevent normal email updates and quitting. Neither Apple support nor the local Apple Genius were able to assist. Even reinstalling the OS (10.5.2, 10.5.3, or 10.5.4) and rebuilding the user account manually did not work. I tried running "Sample Process" in Activity Monitor on Mail.app and noticed a lot of "semaphorewait_signaltrap"s that seemed to be related to AddressBook. This led me to the following process which has (at least for now) fixed my problem:
1. Quit (or Force Quit) Mail.
2. In Address Book, use File>Export>Address Book Archive... to dump the contents of the address book.
3. Quit Address Book
4. Rename your ~/Library/Application Support/Address Book folder to something else (in case you want to restore it later)
5. Start Address Book
6. Use File>Import>Address Book Archive... to restore the contents of the address book
It may be voodoo, but it worked for me.

IPod/iTunes 6 hangs during updating

I've just spent most of a weekend trying to figure out why a 40GB click-wheel iPod will not sync with iTunes. I'm at a bit of a loss here. I know there are several (long) posts on update issues - perhaps this is just another case. Here's the low-down:
Gear:
* iPod 40GB 'click-wheel' model, 3.1 firmware (2005-09-23 update), firewire interconnect direct to iMac (no dock)
* iMac G4 1GHz, OS X 10.3.9, iTunes 6.0.1, about 1600 songs
Symptom:
iPod appears on the desktop and can browse folders. iTunes starts. Hangs during iTunes update on a random song. Usually <20 into the list - but sometimes anything up to song 1000. Flashing 'do not disconnect' symbol freezes on iPod LCD, iMac hangs (Activity Monitor indicates a >90% cpu load on iTunes process, generally requires a 'hard' restart to recover the iMac - even after force-quitting the iTunes process).
Tried:
* Reset iPod
* Restore iPod with 3.1
* Restore iPod with 3.0.2 (2005-06-26)
* iPod into disk mode and restore
* iPod disk verify and erase using OS X Disk Utility, restore firmware
* New firewire cable
* iPod into diagnostics mode - run most tests including HDD scan (all pass)
* iMac disk permissions verify/fix
* Delete iTunes preferences and restart - library rebuilds
* Copy music to a new location, delete all iTunes data, now start afresh and
use add to library to rebuild library
* Removed songs and entire albums that sync freezes on (just freezes on
another song)
* Checked out iMac firewire ports with iSight
* Discussed with Apple Tech guy at Genius bar, agreed pretty much all steps
had been covered. iPod exchanged believing something like iPod connector
to be the issue. No difference.
So I'm pretty much convinced at this stage the issue lies with the iMac software. iPod and cable have been thoroughly investigated and changed out. iMac firewire ports work with iSight.
I've seen some posts suggesting deleting and restrong from the 10.3.9 update the iPod driver (iPodDriver.kext). This seems pretty drastic! I'm hesitant to go get a Tiger upgrade - this should work with 10.3.9.
Apologies for the long post - but I'd be interested to hear views at this point.
Thanks
40GB click-wheel Mac OS X (10.3.9) iTunes 6.0.1

Hey, you the man. I just want to say thank you. I hooked up a just repaired touch wheel iPod to my son's g4 iMAC, and it kept hanging on random songs and even the one's it transferred, it did slowly. I tried everything everyone else has, I did restores and erases forever. And it kept hanging up, so I had to frequently disconnect the iPod to get control back of the computer. This morning I was on the phone with Apple tech for over an hour. His conclusion was that because some of the songs weren't purchased from the Apple Store, I needed to manually transfer each song one at a time. I had to go, so didn't get to try it until later today and same problem. Again I called Apple tech support. Guy was very nice, on phone with him for 90 minutes, he didn't think the first advice made much sense. He gave up in frustration when we couldn't get into the disk utility because iPod kept going to automatic update. He told me to call back tomorrow and speak to a specialist. He said he's never had this much difficulty with an iPod. After the call, I managed to get into the disk utillity and do the erase and repair but didn't do anything. When I finally deactivated the auto update, manually transferring the songs one at a time didn't solve the problem. I read your post, started up after disconnecting the iSight firewire cable, took a chance of activating auto update of songs again, and voila, it transferred all the songs (all 176 of them) in about 10 seconds, like a warm knife through butter. And as they said on Saturday Night Live, it felt "like butter." I will call Apple tomorrow and tell them they really need to do something about this. In the meantime, I'll keep iSight disconnected whenever songs are being transferred into the iPod.
Again, your advice is much appreciated. Thank you for the post.
Steve
Mac OS X (10.4.3)
Mac OS 9.2.x

Arch Live CD x64 hanging during boot at "triggering uevents"

Hello!
I recently was recommended Arch by a friend, and after I followed the 'Newbies Guide' and burning a live CD to install Arch with, it appears to hang during Live CD boot at "installing uevents."
I am trying to install Arch as a dual boot on a late 2008 MacBook Pro which is currently running x64 Windows 7. I have plenty of HD space (100gb free and 100gb unallocated to install Arch onto).
Here is a picture:
http://i.imgur.com/Y8P41nf.jpg
I get the same error weather I try to install x64 or i686 (I think that's what it's called). Is there any reason for this?
Thank you!
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code --
(Sorry, missed that. My bad!)
Last edited by RalphORama (2013-09-07 03:09:13)

frank604 wrote:
You can try nomodeset. Seems to be a failure in loading a driver for your hardware. To read more on similar issues, there's a few posts with more info and suggestions by googling it.
Google result: http://lmgtfy.com/?q=halt+at+triggering+uevent
Results:
https://bbs.archlinux.org/viewtopic.php?id=151259
https://bbs.archlinux.org/viewtopic.php?id=140426
Thanks! I tried googling it myself but got mostly answers that didn't work. I'll try this!

Disk utility hangs during disk verify

Initially 'disk verify' registered errors on exit - minor error/issue it said,some kind of header problem, so I ran disk utility off the install disk. Now the machine's native version of disk utility hangs during disk verify, blue & white spirals forever.
This coincidentally straight after my gmail/google address/account was hacked a couple of days ago.

Have you tried booting in SafeBoot mode (shift key held on start
until login screen appears) then launch Disk Utility and then run
its 'repair disk permissions' item, selecting the Macintosh HD;
and then note the repair window. It should fix something.
And when Disk Utility is done, quit it, and restart the Mac normally.
{...It is unlikely something from gmail affected your computer unless
you open up unknown sourced emails or go to odd web sites where
something may be downloaded from there, which you would almost
have to install (as admin, etc) for malware to work. You can get and
try ClamXAV for free to see if it sees any malware virus content.}
If you use Gmail, and do not log in using the https:// (secure http)
you should change the habit and bookmark the secure login site.
And when booted from the Installer disk and running Disk Utility
from there, see about running "repair disk" and not verify. The
repair choice will verify; but verify will not repair. Could be if
you cannot use the Utility to Repair the issues, and the other
SafeBoot mode and the computer's Disk Utility to get it working
you may need to further troubleshoot and/or get third-party tools.
In any event...
Good luck & happy computing!

Error: Logical end-of-file reached during read operation. Result Code = -39

Hello all,
Recently, I have been suddenly getting this error message:
"Logical end-of-file reached during read operation. Result Code = -39."
In my case, when it does come up, it always pops up during the recording of an audio take. Almost immediately after hitting the stop button, this error message would pop up. And then when I go to check the take that was just recorded, there is nothing but shrieking noise. As a result, this pop up error trashes any good take I may have had. It's unpredictable as to when this error decides to pop up as well. So now, when I record, I tend to just have my fingers crossed and hope that this error doesn't pop up especially right after recording a good take!
To no avail, I have tried different I/O buffer settings, repaired permissions, rebooted, and even re-formatted my recording hard disk.
Could this be a possible hint that my hard disk is about to physically collapse? I have had it for about 2 years. Could it be some sort of bug in Logic? Or something else perhaps?
Appreciate any feedback! Thanks a lot!

DamonGrant wrote:
Thanks for those suggestions Erik...
It's been happening for a month I guess and I don't think that anything new's been installed. I will try recording to the start up disc and to maybe to some USB discs I have.
It seems to happen after working on a project for some time.
After say tracking takes for 45 mins or so. Maybe it's just coincidence, but do you think that might indicate a hardware issue?
Now there might be a clue. What happens when you then quit Logic, reboot your Mac, and reopen the active session? It might be that your disk has become a bit messy from all the traffic, and it just needs to 'settle' in OS X again. Click on the *Spotlight icon* top right of your screen and see if any indexing is taking place. Wait for it to finish before launching Logic.
Alternatively, you could exclude your recording disk from Spotlight indexing alltogether, by dragging the disk to the Privacy field in the Spotlight Sysprefpane.
One other thing to do: turn off Journaling , using *Disk Utility.* Select your recording volume in Disk Utility, hold the alt key while dropping down the File menu. Choose *Disable Journaling.*
On the other hand, it might also point to a RAM issue. Do you ever suffer Kernel panics (=the darkening 'curtain' and the message "You need to restart your Mac... etc")? or 'unexplained' crashes? If not or very rarely, I'ld rule out a RAM issue. If daily, it could be. What you can try in this case is to turn of your Mac and physically take out and reinsert your RAM.
And when you trash (=eject/unmount), physically disconnect and reconnect your recording disk? Does that help? (Logic should not be running when you do this)

PLEASE HELP ! While updating My Xperia Z1 , my pc hanged during the process and .

While updating My Xperia Z1 , my pc hanged during the process ( so , installation of update was interrupted , guess it's same as getting your USB connection disconnected )and now the phone won't turn on .
Its shows the Sony Xperia logo , then shows a black lit screen , and that's it , nothing else happens . I can only turn it off by pressing and holding the power+up volume button , but it turns on automatically if plugged in for charging or in PC only till it gets that black screen .
I tried to flash it with a flashtool (Emma) , but it says phone locked , but since it can't even be turned on , i can't unlock it .
It's a store bought phone and is not of any contracts with any mobile service provider or anything like that ....
Funny you know ... my PC had to crash at the moment i was updating it .... my luck ....
Anyways , now please can anyone tell me what i can do ? I'm sure there is a way i can fix it using my pc and other downloadable software , so please can some one help me how i can fix this problem ? I don't care if i lose all the data on it , i just want my phone back ....
Solved!
Go to Solution.

Problem Solved ,Thank you very much !!
For those who might face the problem and stumble upon this thread after googling
Read above mentioned comments
Now here's what I did :
Turned the phone off by power+volume key method , then plugged it in to the pc via USB and opened sony pc companion , entered Support zone , then entered the Update device option , then I Unplugged my device , only after doing this a window pops up with Repair my phone/tablet in blue text , then i clicked on that and followed the simple instructions ..
It's basically what Thommo said , only i was so freaked out at that time that i failed to follow his instructions to the letter
So now my phone is back to normal , and , it got the latest lolipop update !
Problem solved i guess but Thommo , i need to disturb you again with just one more question , since at the very beginning , the update process was interrupted , and now i got lolipop after the repair ,without needing to update again , so has the lollipop been installed properly on my phone or do i need to use any other flashtool to re-install lollipop ?
again , Thank you ...

Hang during import from camera or media - HELP!

iPhoto hangs during import from camera or media reader. Works for 20 or more photos, then hangs. No response at all. Must force quit. After restarting the import, it will go further the next time, then hang again. And again. And again. Eventually the import completes. After that, all is OK until next import. VERY FRUSTRATING. Especially with 8GB media cards. ARRGH!
I've tried rebuilding iPhoto library (all options). Using iPhoto 7.1.5 on OS X 10.5.6. 4GB ram, intel dual core.
Help me Obe-Wan. You're my only hope.

LarryHN wrote:
Once you get your photos use your camera to reformat your media card - problems like this can be caused by a flaw in the card format
And it is better to use a card reader to import yoru photos and after they are safely in iPhoto use your camera to reformat your card - this assues no data loss and keeps your card format fresh
LN
I usually use the media reader. After the imports started hanging is when I tried importing direct from the camera to see if it made a difference. No difference.
I've reformatted the media. No difference. Still hangs on first import after reformat. Multiple media cards, all same result. Tried different USB ports, same result. Tried different media readers. Same result.

Using Firefox 3.6 after a few mouse click/ keyboard input the firefox window is no more active, mouse click and keyboard input is inactive ; then I click on the taskbar and the keyboard is active again during a few click then it stops again etc.

Using Firefox 3.6 after a few mouse click/ keyboard input the firefox window is no more active, mouse click and keyboard input is inactive ;
to solve it I click on the taskbar and the keyboard is active again during a few click then it does not work any more and I click again on the task bar etc.
after several repetitions, I have to call the task manager alt+del+ctrl, then come back to the firefox window to be able to use keyboard and mouse again

Attaching the picture for the tab shape I want...

Lion ScreenSaver re-active hang during read my iPhoto pictures

Similar Messages

Maybe you are looking for