Lion server installer does not finish

I installed Lion Server from the App store, and it says that it installed successfully, but when I click the Finish button, nothing happens. About This Mac shows Lion 10.7.2, not Lion Server 10.7.2.
Any suggestions or advice will be appreciated.
Thanks.
Thomas Hart

At this point the problem seems to be that the DNS records are bollixed up. I have my domain name server through Zoneedit, and their servers are showing my IP address as 24.xxx.xx.xxx, which is correct. When I do lookup for tehart.net I get an address of 73.xx.xxx.xxx, which is wrong. The lookup for www.tehart.net shows this:
www.tehart.net.
10800
IN
SOA
www.tehart.net. admin.www.tehart.net. 2011122701 86400 3600 604800 10800
www.tehart.net.
10800
IN
NS
www.tehart.net.
www.tehart.net.
10800
IN
A
10.0.1.3
The forwarded address should be 10.0.1.4. I've got no idea how to fix this, and the Apple instructions insist on modifying DNS records, without supplying decent examples of how they should look.
I don't know if this is causing the problem, but if you've got any idea, I'd appreciate it.
Thanks.
Thomas Hart

Similar Messages

Adobe Media Server Installer does not run

I am trying to install Adobe Media Server 5 on Windows 2008 R2 64 bit on i3 logged in as an administarive user over RDP.
The installer simply does not run - a very short hourglass then nothing. Not logs in applicaiton, system of setup logs.
The bundled Adobe Media Gateway installer runs just fine.
Tried a machine restart, and still no go...
Any ideas gratefully received
Simon

ok, got it... go properties on the file and 'unblock'
This was because I downloaded it on another machine, and then copied it over. Windows 2008 knew it had not been made locally and silently blocked execution.

VM Server installer does not recognize RAID configuration in Intel ESRT2

Hello,
I'm having a big issue here trying to deploy my third Oracle VM Server.
I have:
- A Intel Server Board S3420GPLC
- A Intel Xeon X3440 processor
- 16GB DDR3 ECC Memory
- Six 1TB Hard Drives
What I'm trying to do:
- Create a RAID array using Intel ESRT2 (Embedded Server RAID Technology II) using all the discs (done)
- Install Oracle VM Server into the array
- Install some VMs....
The problems:
- When I boot the VM Server installer from USB stick I got an error saying that there is not enought memory. This issue is solved by typing "linux mem=15GB"
- I got a screen per disk warning me about that the discs need to be initialized and all the data will be lost
- When I go to the disk partitioning screen all the disks are listed separated, the installer simply don't recognize the RAID configured before.
What I already tryied:
- Change the RAID controller from ESRT2 to Intel Matrix
-> Didn't solve.
- Create a Driver Disk with the disk images supplied by Intel here
-> I launch the installer using "linux mem=15GB noprobe=ata1 noprobe=ata2 ....". When Im asked by the installer to load the drivers it doesn't recognize the disk, so i couldn't load the drivers.
Now, the questions:
- Is there another driver I can use do make the vm server installer recognize the RAId configured?
- Is there a better way to setup this server, considering that it needs to be "self contanied" (store and run vms)?
Edited by: xyp on 14/10/2010 11:37

So...
- I have installed VM Server into ordinary linux partitions on the first disk.
- I have created a big partition in the first disc with the space not used for the VM Server
- I have created five equal partitions on the other discs
- I have configured software raid 10 using mdadm
Now the problem seems to be solved, i have a storage repository with almost 3TB and can deploy my VMs.
Unfortunatelly only my windows 2008 r2 hardware virtualized vm is working, the linux paravitualized guests not. but this new issue will be a subject for another topic.

Lion Server Podcast does not want to remain turned off.

I have all the current patches installed and from the beginning, Podcast, when looked at in the "server" app always shows as on. I can turn it off but then in a few seconds it turns itself back on.
I have never configured Podcast for anything, even in the Server Admin tools. In server admin tools it shows as off. I can see changes in amount of memory in use when turning it off and watching it come on. I have not looked through the activity monitor and all the logs are showing is that it was turned off then back on
ideas????

Charge it with a wall charger for 15 minutes, then hold the HOME and SLEEP buttons until an Apple logo appears, about 10 seconds.

Creating Oracle Inventory Installation Step Does Not Finish and Hangs at 99% while installing Hyperion 11.1.1.4

Hi Guys,
Creating Oracle Inventory Installation Step Does Not Finish and Hangs at 99% while installing Hyperion 11.1.1.4.I'm running the installer from a local drive and also noticed that the uninstaller files are not created.The installer process has been running for 4+ hours.
Any suggestions/tips?
Thanks
Manoj

hi John,
we left the installer running overnight, but the install process has still not completed.Also it has not created any uninstaller files under the following directory:
E:\APPS\Hyperion\uninstall
what could be the reason for that?
Thanks.
Manoj

Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

Under what circumstances does mail "not leave the mails on the server"?
If you mean that you delete them (or move them out of the inbox) on one device and then find them not in the inbox on the server when you look from another device, that's how IMAP is supposed to work. (Note that the deletion or moving might be the result of rules you have set up in Mail.)
If you mean something else, please explain your issue in more detail.

I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

You need to contact the developer/manufacturer directly to determine if their product is compatible w/Yosemite. It is not listed on their system requirement website:
Mac OS X 10.9 Mavericks
Mac OS X 10.8 Mountain Lion
Mac OS X 10.7 Lion
Mac OS X 10.6 Snow Leopard*
Note: ArchiCAD 17 is the last version of ArchiCAD to support Mac OS X 10.6
Only case insensitive file-system volumes are supported.
http://www.graphisoft.com/support/system_requirements/archicad17.html

Syncronizing my 3gs with itunes the sync does not finish because itunes allways crash and stuck i made some troubleshoots like reinstall again but nothing and my itunes is update and the system is windows vista home premium.Please help me...

Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
Please help me.

I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
You asked what I meant about saving the installer on your PC.
When you go to the iTunes download page:
http://www.apple.com/itunes/download/
And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts.

Import From CSV File statement runs forever, no error, does not finish

Hello,
I am trying to import a CSV file in a JAVA program, with the following statement:
IMPORT FROM CSV FILE '/debug/testdatabase/FILE.csv'
INTO "JOSEPH"."TEST_TABLE"
WITH COLUMN LIST IN FIRST ROW
RECORD DELIMITED BY '\n'
FIELD DELIMITED BY '\t' ERROR LOG '/debug/testdatabase/file.err'
THREADS 10
BATCH 10000
I have two HANA instances on different machines A and B:
Both machines run HANA version 1.00.74.00.389160 (NewDB100_REL), while the OS is
SUSE Linux Enterprise Server 11.1 on machine A and
SUSE Linux Enterprise Server 11.2 on machine B.
The statement above runs fine on machine A and the rows are imported properly from JAVA as well as when executed from HANA Studio SQL console.
If I copy the file to machine B and try the exact same statement with the same file, it does not finish (neither from JAVA nor from HANA Studio SQL console). There is no error either. It cannot be cancelled, only a HANA restart stops the statement. Also the sample file I use has only 2 rows, and memory does not seem to be a problem.
I seem to have a similar problem to the one described here, but the answers there do not help me: http://scn.sap.com/thread/3396582 I specified the record delimiter, and I used a python script to check for any strange characters that are not supposed to be there, but didn't find any.
If I copy the file to my windows PC and use the "File Menu -> Import -> SAP Hana Content -> Data from Local file" function, it imports the file correctly into B, but I need to be able to do it from JAVA.
Machine A administration view:
Machine B administration view:
If you have any idea what might cause this behavior or where I can find more information on this problem please give me a hint.

Hi Joseph,
First from the pics, the revision of your SAP HANA instance is 73 instead of 74. Since I have no identical environment, I cannot test it for you. But can you try the simplest scenario? You can create a table with only one column table try to import a CSV file with only one row.
Best regards,
Wenjun

J2EE ADDIn INSTALLATION DOES NOT MOVE AFTER ABAP UME STAGE

Hi,
I am installing java add-in for ABAP system for NW2004s SR2 system. I am able to complete SCS and DB instances. But during installation of CI at step u201CSAP system > ABAP UME u201Cafter
pressing u201CNext u201Cbutton the installation does not continue without any
warning or error message, It asks for SDM password and J2EE_ADMIN password, even after I give the password, the installation does not go forward. After pressing next it still comes to the same step.
I had done a proper un-install through SAPinst, cleaned up all the j2ee and SDM folders manually, changed the jdk version, etc and tried, but still the same issue.
I had created j2ee_admin, sapjsf, j2ee_guest users manually, cleared j2ee and SDM folders manually and tried to re-install but the same issue.
There are no error messages or logs given, but just the issue. Any help at the earliest would be appreciable.
The only error message I can read is as below:
INFO 2008-05-28 17:06:38
Creating file
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.jlaunch.
INFO 2008-05-28 17:06:38
Creating file
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
INFO 2008-05-28 17:06:39
Output of
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch
UserCheck.jlaunch com.sap.security.tools.UserCheck
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install
-c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a
checkBeforeCreate -u J2EE_ADMIN -r SAP_J2EE_ADMIN -message_file
UserCheck.message is written to the logfile
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
WARNING 2008-05-28 17:06:42
Execution of the command
"/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch
UserCheck.jlaunch com.sap.security.tools.UserCheck
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install
-c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a
checkBeforeCreate -u J2EE_ADMIN -r SAP_J2EE_ADMIN -message_file
UserCheck.message" finished with return code 254. Output:
INFO 2008-05-28 17:06:42
Removing file
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/dev_UserCheck.
System details
Kernel release: 95 64bit
Unicode: - NO
Operating system: SunOS 5.9 Generic_122300-08 sun4u sparc SUNW,Sun-Fire-15000
Thanks,
PK

Hi markus,
May be this additional information would help.
the sapinst_dev.log shows the following:
INFO       2008-05-30 13:37:38 [syuxcpath.cpp:351]
           CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.jlaunch.
INFO       2008-05-30 13:37:38 [syuxcpath.cpp:351]
           CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
TRACE      [syuxctask.cpp:1355]
           CSyTaskImpl::start(bool)
A child process has been started. Pid = 22550
INFO       2008-05-30 13:37:39
           CJSlibModule::writeInfo_impl()
Output of /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install -c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a checkBeforeCreate -u J2EE_ADMIN -p XXXXXX -r SAP_J2EE_ADMIN -message_file UserCheck.message is written to the logfile /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
WARNING    2008-05-30 13:37:44
           CJSlibModule::writeWarning_impl()
Execution of the command "/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install -c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a checkBeforeCreate -u J2EE_ADMIN -p XXXXXX -r SAP_J2EE_ADMIN -message_file UserCheck.message" finished with return code 254. Output:
INFO       2008-05-30 13:37:44 [syuxcfile.cpp:280]
           CSyFileImpl::remove()
Removing file /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/dev_UserCheck.
TRACE      [iaxxejsexp.cpp:199]
           EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.ume.generalError:
. For more details see output of logfile:
TRACE      [iaxxdlghnd.cpp:150]
           CDialogHandler::doHandleDoc()
Dialog validator of dialog : d_nw_ume_doublestack_passwords
called by :|NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Doublestack|ind|ind|ind|ind|1|0|askPasswords
returns false without any additional information.
Please inform the installation development.
TRACE      [iaxxgenimp.cpp:1155]
           showDialog()
waiting for an answer from gui
nzlsfn23:bd2adm 93%
Regards,
P. Kumaravel.

The Windows Installer does not permit installation from a RDP connection.

Hello!
Today when was installing Exchange 2013SP1 onto one of my virtual machines I got the following error:
This error has suprised me in a lot of ways: 1) it was my 10th, or 20th or ... installation of Exchange on to the same test VM and this error has never arised before, 2) it's rather tardy error as Step1 and Step2 completed successfully in spite of
"The Windows Installer does not permit installation from a RDP connection." 3) I was using
Virtual machine connection - not RDP connection!
Thank you in advance,
Michael

Hello!
Today when was installing Exchange 2013SP1 onto one of my virtual machines I got the following error:
This error has suprised me in a lot of ways: 1) it was my 10th, or 20th or ... installation of Exchange on to the same test VM and this error has never arised before, 2) it's rather tardy error as Step1 and Step2 completed successfully in spite of
"The Windows Installer does not permit installation from a RDP connection." 3) I was using
Virtual machine connection - not RDP connection!
Thank you in advance,
Michael
It looks like the installation files are being shared over a terminal services connection (based on what you are saying, I'm guessing you're using Hyper-v and it's using TS to present the files). I always run into mixed results when I run installs from
a path not local to the server. Can you copy the install paths locally and rerun setup?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Trying to upgrade an itunes download and getting error message "windows installer did not finish as expected. contact person or vendor"

trying to upgrade my ITunes for my Iphone and cannot access content. During upgrade getting message "windows installer did not finish as expected..contact vendor"

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Xclock and rapidwiz installer does not work

We are running Oracle E-Business suites 11.5.10.2 on Linux OEL 5 two node vmware system.
cannot run xclock and rapidwiz instaler.
I have set DISPLAY like that
DISPLAY=:0.0; export DISPLAY
when I run xclock, don't get any error message but clock does not show.
When I run rapidwiz , don't get any error message but installer does not run.
What I am missing. I am running from PUTTY from office network, what is missing.
Please help.

959660 wrote:
We don't have Hummingbird Exceed in our office. I downloaded xming software and launch xming.
set the DISPLAY to my PC ip address and also with the linux server etc/host ip address, tired xclcok command, again did not get any errors but could not see clock.
Then I opened VMware console, as soon as I log in to my Linux server through console, I was able to see clock plus the window executed by rapidwiz command from PUTTY.
So, my question is that if I vmware console window to upgrade r12 (installation and configuration), is that OK ?
Yes this is OK
I also need to know that my Linux libraries, kernal, patches are compatible with R12. Do I need to open another thread for this purpose.
Pl see this related thread - Requirements for Linux OEL 5 before upgrade to r12
Thanks for your help. I used this forum for the first time and really impressed, got prompt reply that I could not expect from my SR opened with the Metalink.
Regards
AsadHTH
Srini

ESX1 5.5 Installer does not recognize local storage

Brand new install, new server (we're new at this too), ESXi installer does not see local drives during set up. Server is an IBM x3650 M4, with an M5110e_R5 RAID controller.
we've tried with no RAID setup, we've set up arrays, removed them again, no luck. Any thoughts?
Thanks in advance

Very likely "multipath -ll" doesn't show up any path to sdb from the device mapper (neither it is in /dev/mapper)
- Make sure you've rescanned disks from OVM Manager (Select the ovm server disks page) ;
- try to perform "multipath -d" to see if it takes the path from sdb into account. If it is, run "multipath" no option
- try to reboot the OVM server since it's not too late ;-)
Other than that I'm afraid you'll have to figure out why device mapper doesn't map your disk; the ovm server should have "script" install on it. Do the following :
cd /root
script figureoutwhyitsucks.log
multipathd -k
show config
<ctrl>+D
exit
That file would be helpful to figure out.

SAPinst does not finish at the task of "Execute step CreateDbSchema"

Hello all,
I'm trying to install Solution Manager 4.0 SR3 with MaxDB 7.6.02 Build12.
But SAPinst does not finish the following task ...
INFO       2008-04-21 23:47:53.765 [iaxxgenimp.cpp:632]
           showDialog()
Execute step CreateDbSchema of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|4|0|Sdb_Schema|ind|ind|ind|ind|1|0.
Does anyone have same problem? Could you give me advice?
Also I found one error message near this task in the logging message.
INFO[E]    2008-04-21 23:18:08.78 [synxcuser.cpp:102]
           CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="vm-sap2\SAP_LocalAdmin" does not exist.
Any comment and advice are very appreciated.
Best Regards,
Makoto

We resolved the problem.
Problem:
Installation of 7.0 using MaxDb on Windows x64 hangs on the sapinst at the step CreateDbSchema..
There is no error in the installation log.
We are using the specified JDK (JAVA development kit) as specified by OSS Note 723909 which is downloaded from a special website of SUN.com.
We have tried uninstalling the other versions of the JDK build and tried other builds.
Solution:
By searching message boards for the specific error CreateDbSchema, one of the threads mentioned that passwords for MaxDb can't have special characters. Searching OSS yielded a Note 674430 which confirmed that installing on MaxDb has to use alpha-numeric. We were using an @. We dropped the database and deleted the user so it would be a clean install, and ran again using a different password. Some other cleanup was done too, but we suspect it was the password.

Lion server installer does not finish

Similar Messages

Maybe you are looking for