Lion Server User "Access to Services" Greyed Out

Sorry... Posted this in the wrong place...
Message was edited by: TheYoYoMan

Is there no help on this question?

Similar Messages

Regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections (any ideas???)

regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you

Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen

Essbase administration service. The SQL data access source is greyed out

Env: EAS 11g Oracle 10g database
Hi,
After i tried to install EAS and try to create a rule file, I find out that I am unable to select the datasource from "SQL data sources" field, which has been greyed out. However, I am able to make the connection in another environment that use the same settings. This is a replica of the system.
1) Is there something with the connection. If yes, what file(s) I need to check and any other things that I need to check. It could be something with the jdbc.ini file perhaps. But when I try to check this ini file, it appears the same with the one that works in the other environment
kindly need your help
Rgds,
Raymond

To configure data sources on UNIX:
1.Open the $EPM_ORACLE_HOME/common/ODBC/Merant/x.x/odbc.ini file and add a data source description.
2.Copy the $EPM_ORACLE_HOME/common/ODBC/Merant/x.x/odbc.ini to $ESSBASEPATH/bin/.odbc.ini.
3.Create a symbolic link to the $ESSBASEPATH/bin/.odbc.ini from the UNIX user home directory:
ln -s $EPM_ORACLE_HOME/common/ODBC/Merant/x.x/odbc.ini /home/myfolder/.odbc.ini
4.Verify that the odbc.ini file in the user home directory matches the odbc.ini file in EPM_ORACLE_HOME/common/ODBC/Merant/x.x.
If the files do not match, repeat step1 through step3
The ODBC-64 folder is used when the Linux is a 64 bit.
Check if these are the steps you followed to create the Data Source.
The connection to the DSN created can be checked by below steps in Unix..
[essdev@dshypdev bin]$ pwd
essdev/hyperion/products/Essbase/eis/server/bin
[essdev@dshypdev bin]$ ./odbcconfig
Using the following Environment...
Env HYPERION_HOME=/essdev/hyperion
Env TDODBC=. (for Teradata only)
odbc.ini file name=/essdev/hyperion/common/ODBC-64/Merant/5.2/odbc.ini
Database Driver Names:
Db2=/essdev/hyperion/common/ODBC/Merant/5.1/lib/ARdb221.so
Oracle=/essdev/hyperion/common/ODBC/Merant/5.1/lib/ARora21.so
Sybase=/essdev/hyperion/common/ODBC/Merant/5.1/lib/ARase21.so
Informix=/essdev/hyperion/common/ODBC/Merant/5.1/lib/ARifcl21.so
Teradata=./drivers/tdata.so
SQL Server=/essdev/hyperion/common/ODBC/Merant/5.1/lib/ARmsss21.so
ODBC.ini Configuring Utility
1. List
2. Add
3. Delete
4. Test
5. Exit
Select option 4 to test the connection

User read & write permissions greyed out in sharing

Hi I am trying to access a Fat32 formatted HD plugged into a Macbook running lion from a Macbook Pro running Mavericks. When i go into system preferences and sharing I am able to see the External HD and share it but the read and write options for the users are all greyed out. Also when I access the macbook through sharing or connect to server I am unable to see the external HD but I do see the other shared folders on the macbook's internal drive. I have tried to verify and repair the drive but it has not solved the problem. Any suggestions would be greatly appreciated.

In system preferences on both macbook's , you need to go to file sharing and making sure it's on for both ,click on options and enable smb for windows. follow instructions. I am assuming that the external drive has windows formate on it.

SMB Guest Access allowed but greyed out so cant turn it off

Hi guys
I have recently installed 10.6 snow leopard server to setup as a file server. It will be host to a mix of mac and windows clients.
I have installed and setup SMB service:
Role: Primary Domain Controller
By default, Allow Guest Access is ticked and greyed out. I want to disable it but I can click the box??
Any suggestions?
Thanks.
Rik.

I was in the same boat. Found the answer in Terminal (I'm assuming you know what you're doing there):
You can verify the settings by typing (NOTE: the serveradmin command must be run as root):
          serveradmin settings smb
Look for a line reading:
        smb:map to guest = "Bad User"
This indicates Guest Access is ON.
To disable guest access in SMB:
         serveradmin settings smb:map to guest = "Never"
I had to quit and reopen the Server Admin app before the change showed in the GUI.
-Axiom

Lion server users on that Mac or the network?

This question is so 101 I'm almost afraid to ask it: when you create users in the Lion server software, are these users for that specfic Mac (just like any Mac user) or are they user on the network who will share the server services?
I can't get past this fundamental set up. I only want one user to admin the server software, but I have 5 users of other macs in our office who I want to be able to use the server services, like email and wiki.
How do I set them up?

Look in the Server App, if the users there have a small blue globe on them then they are Network Users. If they don't have the globe then you aren't serving an Open Directory Master.
Follow the advice in the Next Steps panel in the lower part of the Server App.

Upgrade from Snow Leopard Server to Lion Server hangs at configuring services...

I am running the Mac mini with snow leopard server 2.53 ghz 2GB of ram, 2x500GB hard drives, and have followed through the process to install Lion Server. The installation appears to be hung at the Configuring Services section of the setup process. I have left it for a couple of hours and nothing has progressed.
Should I leave it longer, hoping that it will work through the process (if in fact it is working through something)?
How long should this normally take?
As this is my work server, hosting mail, web, FTP, and file sharing, it is rather important to get it up and running as quickly as possible.
Any thoughts on how I can get it moving?
Hard power off of the Mac Mini reboots the machine, then proceeds back to the setup page, and then hangs on the same Configuring Services.
Any assistance would be much appreciated.
Thanks.

Lion Server Upgraders,
beware and proceed with caution.
Apple web site is naively optimistic on the upgrade process:
"To upgrade your Mac to OS X Lion, you don’t need to drive to a store, bring home a box, and install a bunch of discs. All you do is click the Mac App Store icon, buy Lion for $29.99, and your Mac does the rest. Just make sure you have what you need to download Lion to your Mac."
And then has a 3 step process...
This is completely miss leading.
Read this document first: http://manuals.info.apple.com/en_US/lion_server_upgrading_migrating.pdf
It will make it readily apparent that moving from Snow Leopard Server to Lion is not going to be simple.
Having done this twice now.. I have found that:
1. Open Directory migration is a weak point. Lion & Snow Leopard Open Directory are not compatible, so if you have masters & replica then expect trouble. I have an unresolved issue trying to get a simple Lion Server to Lion Server Open Directory replica up and running. This compatibility seems to also cause migration to fail, as I found that all my local User/Groups transferred ok but non of the /127.0.0.1/LDAPv3 (Open Directory) ones did. This is a very important item, as all the mail accounts in dovecot use LDAP generated UID, so you have to be careful that you do not loose mail accounts.
2. Mail - your mail aliases will not transferred, so you will need to reapply the aliases.
3. Web Server Setup - This broke, under migration as I gather the entire Web serving tree has changed. In particular I had "Snow Leopard" Web Mail (which is based on Squirel) on my "Snow Leopard" Server and this is now dead...
4. Digital Certificates - I found that the valid (ie signed by trusted CA's) did not get migrated, so I had to re-imported my Digital Certificates. If you have paid for third party CA certificates then make sure you have got these copied somewhere, as if you loose them then you will likely need to go to your provider and get a certificate revocation and new certificate, which will cost you money!
Cheers,
Zebity.

Issues with Fast User Switching, language pref, greyed out menu options

I have only one user logged in to my Macbook. If i want to select the other user using Fast User Switching and clicking on the username in top right corner of screen, nothing happens. The other user at this time is still logged out.
Incidentally, when i click on the airport symbol, the wireless networks are often greyed out and i can't change networks unless in go into network prefs.
One more thing - i have english and spanish selected as languages in international preferences. I ca not switch back to english at all - by clicking on the flag in the menu bar or by going into sys prefs. When n battery power, power characteristics are also greyed out and unable to select a different profile.
any help welcome.
thanks

It sounds like everything in your menu bar is florfed.
Can you log in to the other user account from the login window instead of by fast user switching? If so, does that account have the same problems with the menu bar?

I want to erase my hard drive and reinstall lion server. Can someone help me out?

i have a mac mini running lion server. I want to erase all the date and start fresh. When i try to reinstall Lion it does not show anything about lion server but jut Lion. I want to make sure I do it properly. It is also asking me in which hard drive to install Lion but im unsure.
can someone help me out?

Check in the app store under purchases both lion and server should show up there to download again.
No need to erase both drives for a clean install just the drive you are using for the OSX. Though if you are truly starting a fresh then erase and reformat both.
As for Upgrades. Yosemite is the only upgrade now available through the app store as is Server 4.0 for Yosemite. I have not tested the latest server yet and can not comment on it's reliability.
Any server you set up should be thoroughly tested on a closed network before going live.
Hope this helps.
PJRS

"Options for Selected Service" greyed out.

Help! I need to change QMaster from working with 1 processor to 4, but the option to change it is greyed out.
FCP 5.1.4 on Leopard (10.5.2)

Hi Zebra,
I noticed you where using FCP 5.
Make sure Qmaster 2 is updated by the way. But to reassure you of your question, they have corrected? this in FCP 6 with Qmaster 3.
However, if you open your "Activity Monitor" under your Utilties folder in your Application folder, you will find when you double click on the processor window it will maximize and show all processors activities. You should see if Qmaster is running right, all processors working anyway.
Not sure, why they grayed out 2.3.1, and opened it up in 3.
There are theories, on the net as well as legitimate testing that describes processor to ram ratios.
FCP (Compressor) runs better on a 8 core system with 4 cores("instances" in Qmaster Prefs) than all 8 running.
Try this link to see.
http://www.barefeats.com/octopro5.html
BUT in your situation, you are fine. There are some ways I believe in Qmaster 2.3.1 to change the scripting to adjust processor distribution, but thats beyond me.

Lion Safari 6 Show Page Source Greyed Out

Hi Folks,
I can't view source. I've enabled "Show develop menu in menu bar" but my view source is still greyed out. Additionally my show web inspector comes up empty on every page. I vaguely remember the view source becoming disabled when my cache was filled on the old safari. I tried "Empty Caches" and that didn't work either. Any ideas?
Thanks!

When I right click on the page I only see:
Back
Reload Page
Open in Dashboard
Save Page As
Print Page
Inspect Element (when I click on this a blank window comes up with web inspector)
Import Image
Capture Selection from Screen

VL10D user role tab is greyed out

Can someone please help me.
I am using Tcode and the "User role" tab is greyed , means I cant pick any thing. Is there any place in the configuration where I can go and make changes to the tcode.
Thanks,
Sahar

Hi,
To change the profile go to "SPRO --> Logistics Execution --> Shipping --> Worklist --> Configure Lst profile"
To assign this profile to Transaction go to "VL10CUV"
Regards,
K.Annadurai.

Exception (org.apache.axis2.AxisFault: Server) when accessing Web-Service

Hi all,
I have read already some interesting posts on Java implementation for Oracle CoD Web Services.
Somehow I am stuck and can't find a way out.
I try to access the LeadQuery command via the following code:
          String sessionCookie = logon(
                    "https://secure-ausomxapa.crmondemand.com/Services/Integration",
                    username, password);
          LeadStub stub;
          try {
               stub = new LeadStub(
                         "https://secure-ausomxapa.crmondemand.com/Services/Integration;jsessionid="
                                   + sessionCookie);
               // ServiceClient client = stub._getServiceClient();
               // client.getOptions().setManageSession(true);
               // client.getOptions().setProperty("jsessionid", sessionCookie);
               // client.getOptions().setUserName(username);
               // client.getOptions().setPassword(password);
               LeadQueryPage_Input leadQueryPage_Input = new LeadQueryPage_Input();
               ListOfLeadQuery listOfLeadQuery = new ListOfLeadQuery();
               QueryType queryType = new QueryType();
               queryType.setString("LIKE 'A*'");
               LeadQuery leadQuery = new LeadQuery();
               leadQuery.setCompany(queryType);
               listOfLeadQuery.setLead(leadQuery);
               leadQueryPage_Input.setListOfLead(listOfLeadQuery);
               LeadQueryPage_Output leadQueryPage_Output = stub
                         .LeadQueryPage(leadQueryPage_Input);
          } catch (AxisFault e) {
               e.printStackTrace();
          } catch (RemoteException e) {
               e.printStackTrace();
          } catch (Exception e) {
               e.printStackTrace();
               System.err.println("\n\n\n");
          logoff("https://secure-ausomxapa.crmondemand.com/Services/Integration",
                    sessionCookie);
Logging In and Out is no problem, runs like music. But whenever LeadQueryPage is called, I just receive the following error:
org.apache.axis2.AxisFault: Server
     at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:512)
     at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:370)
     at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:416)
     at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:228)
     at org.apache.axis2.client.OperationClient.execute(OperationClient.java:163)
     at crmondemand.LeadStub.LeadQueryPage(LeadStub.java:1026)
     at CODconnection.main(CODconnection.java:58)
I'm using Eclipse 3.4.2 with AXIS2 1.4, and the Eclipse Plug-In for AXIS 1.3 (with some small patch to get it to work).
I downloaded the custom WSDL from Oracle CoD (CRM On Demand) Admin page and used the AXIS-Wizard in Eclipse to transform it to Java.
For that, I already tried the -g option (which is "Create everything - Client and Server" in the wizard).
Anyone has a clue what the problem might be?
Btw.: I downloaded also V1.0 WSDL to check if that works. Some problem.
Found out that just the error reporting sucks and at the end the Server missed the correct Authentification.
Funnily I just did what I read a couple of time. With this small bit of code it works:
               ServiceClient client = stub._getServiceClient();
               client.getOptions().setManageSession(true);
               client.getOptions().setProperty(HTTPConstants.HEADER_COOKIE, "jsessionid="+sessionCookie);
               client.getOptions().setUserName(username);
               client.getOptions().setPassword(password);
-----

You are missing the end point location. See the sample client below:
MyHelloMyHelloSOAP11PortStub stub = new MyHelloMyHelloSOAP11PortStub("http://localhost:8080/axis2/services/MyHello");
               MyHelloMyHelloSOAP11PortStub.SayHello hello = new MyHelloMyHelloSOAP11PortStub.SayHello();
               hello.setS("ABCD");
               MyHelloMyHelloSOAP11PortStub.SayHelloResponse resp=stub.sayHello(hello);
               System.out.println("Response from Web Service "+resp.get_return());

Lion Server: Users Cannot Change Password

I'm not sure how long this has been the case, as we don't have a ton of users. We recently added a new user, and directed her to our website to change her password (the only service she needs is email), and she gets a window that clearly is not being presented correctly from the server. When you look at the screen, you see that the window title and fields for the user to enter their current name and password list what looks like programming references rather than user-friendly titles.
Even if you enter information and click the button, it gives you the error about the password server not being reached.
Has anyone seen similar issues to this?
Thanks in advance!

isolate it further.
does this occur for this user only? (test other users)
add a new user to see if its related only to newer users
verify your dns, what are the results of the following form terminal: sudo changeip -checkhostname"
Jeff

After Time Machine restore, Lion Server doesn't have services

My poor old server finally died, so I replaced it with new hardware. I wiped the hard drive, installed Lion fresh, and did a restore from Time Machine. However, when I run the Server Admin app, it says it was unable to connect to the machine.
I re-ran the Server Admin Tools install, and I also tried to connect via IP address.
I must have missed something, hopefully someone will have a tip. Thanks!

Not from Time Machine which is backing up only a file, not its individual contents. Either you restore iPhoto Library or not.
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Get an external hard drive on which to store some of your files after which you can
erase the data from your internal drive to free up space.
5. Also see Freeing space on your Mac OS X startup disk.
6. See Where did my Disk Space go?.
7. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

Lion Server User "Access to Services" Greyed Out

Similar Messages

Maybe you are looking for