Lion setup assistant opens every time I log on...

I just upgraded my iMac 3.06 Intel Core 2 Duo to Lion. Now, every time I log on, the Lion setup assistant boots up and requires me to "click to continue." Also, the iCloud preference pane opens up. This happens every single time I log on. I have tried to find out how to disable the screens from opening, but with no luck. Can anyone help me turn the buggers off?

rkaufmann87, Thanks again for your reply,
I had done the simple things previous to my last post - following your excellent advice on other threads.  I have tried again the methods you describe, starting in safe mode.  Also starting via the recovery disk and 'Repair Disk Permission' (done this about 6 times).  Unfortunately no change.  What is strange is the same mesage is displayed multiple times.
"Permissions differ on system/library/coreservices/remoteManagement/ARDAgent.app/contents/support/remo tedesktopapp/contents/resources"
"Repaired system library core services remoteManagement/ARDSmgmt.app"
And running Repair Disk Permissions, the same repair is affected even when this was completed in the past repair scan.  It is as if the repair is not effective or there is a subroutine rewriting this again?
The Repair Disk Option has been run multiple times with no fault found.
I have even done a full install from safe mode, downloading the install file again from the app store but still have the same problem.  Settings not remembered and the set up assistant launches again with the System Preferences pane also displayed.  The MacBook also seems sluggish compared to the mac mini which had its Lion update and works just fine.  Thankfully ios5 devices, ipad and iphone work a treat, its just getting this MacBook sorted. 
Can you advise my best course of action?
I get the impression that I will neeed to backup my data and 'start again' with a disk format and clean install?
Many thanks

Similar Messages

  • What cousen 7 other tabs to open every time a log in to firefox. waht can i do to fix this?

    every time i log in firefox 7 other tab's open up and when a try to open a tab sometime it will crash or it frees.
    == Crash ID(s) ==
    no code

    Do you have those pages set as multiple home pages?
    See [[How to set the home page]]: Firefox supports multiple home pages separated by '|' symbols

  • Setup assistant running every time I open iTunes

    Hi,
    I'm having a really annoying problem with iTunes - ever since I installed the latest version, the setup assistant pops up EVERY time I open iTunes. I finally let it run all the way through one day in hopes that would put a stop to it, but to no avail. It actually duplicated many things in my library and made random changes here and there to album artwork and song/artist/album names (that I didn't want changed and had to spend a LOT of time correcting). Once I click cancel, it takes me into iTunes as normal but I don't want the assistant coming up every time I open the program. I haven't been able to find any help topics on this issue. I've tried re-installing, it didn't help. Assistance would be greatly appreciated!
    Thank you,
    Lori

    Hi, I have the exact same problem since my first crash with 9.0 I'm hesitant to go through the set up where it asks me to either let iTunes search my home folder for mp3/ACC or I can chose to do it myself later. Can one of these options delete my current library? When I cancel the set up at this point, iTunes opens up normally with everything intact. I'm scared to screw it all up if I chose one of these options. Any advice?

  • ITunes Setup Assistant runs every time I start iTunes 7.3.1.3

    The past 2 iterations of iTunes have had the same problem for me - even though the program is installed already, it doesn't save my settings and runs the setup assistant every time I start the application. I've gone through the assistant twice and put everything as I had it previously but, once I close the program and restart, the assistant pops up again and my settings are gone. I never had this problem until 7.3 or 7.3.1 and it's very frustrating... (>_<)<br>
    IBM T43   Windows XP Pro   2.0 ghz Pentium M, 1 gig ram

    Well, iTunes appears to finally work correctly. I don't know exactly why this is but it's due to one of three possible things. First, I uninstalled the 2 programs that I had installed to monitor what music I played for their services. These programs were Last.fm for Windows Version 1.3.1.1 iTunes plugin version 2.0.11.0 and Virb.com iTunes Plugin Version 1.0.0.5. Finally, instead of using the Apple Software Update on my computer as I had previously, this time I went directly to Apple's website, downloaded the entire iTunes + Quicktime install package, and reinstalled from that. After doing so, the Setup Assistant ran again but finally remembered my altered settings upon program restart. Now that iTunes was working properly, I have reinstalled both plugins and they now appear to function properly without negatively affecting iTunes. I hope this helps people who have also installed plugins to monitor their music listening patterns and had problems with the latest iTunes update.

  • Setup assistant crashes every time on new MacBook!

    Hello everyone,
    I have an unusual problem with a newly purchased Macbook (2GHz).
    The first time I turned it on it ran through Setup assistant up until I'm prompted for an Apple ID, at which point it crashed and returns to the Welcome animation - continuing in this loop whatever info is entered. I have tried:
    - Repairing permissions
    - Zapping PRAM
    - Starting in Safe Mode
    - Formatting and restoring from original OS DVDs
    None of these have worked.
    Lastly I have used Terminal from a DVD boot to pick up the crash log files stored on the OS partition - two files are:
    Setup Assistant... .crash
    VDCAssistant... .crash
    Here is the header from the first file:
    Process: Setup Assistant [419]
    Path: /System/Library/CoreServices/Setup Assistant.app/Contents/MacOS/Setup Assistant
    Identifier: Setup Assistant
    Version: ??? (???)
    Code Type: X86 (Native)
    Parent Process: launchd [1]
    Date/Time: 2007-12-16 12:09:05.673 -0800
    OS Version: Mac OS X 10.5 (9A3115a)
    Report Version: 6
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000008
    Crashed Thread: 14
    Does anyone have any ideas?
    Many Thanks!

    Just experienced the same problem on a brand new mac mini after applying a Leopard software update. I stumbled upon a few threads that helped me out. Essentially, you need to reboot the mac in safe mode, and then restart. That's what I did and it worked fine (not that I think this is acceptable but it's a solution.) Some more details and instructions via this link:
    http://www.tuaw.com/2007/12/15/tuaw-tip-getting-out-of-setup-assistant-****/
    Hope this helps someone.

  • Network Setup Assistant runs every time I turn the computer on.

    Everytime I turn on my computer, Network Setup Assistant decides that it wants to help me locate and create a new network - which is awfully nice of it. The problem, however, is that it either a) never fully completes because of some failure, or b)doesn't need to happen in the first place because I can access my Airport network without the setup assistant.
    Is there any way to turn the Network Setup Assistant off, or at least make is stop trying to help me when I don't need it to?

    First you can just uncheck them if they are checked if there's nothing there that you want to open when you boot up. Usually there are software programs that you have downloaded
    that you might have in your menu bar at bootup.
    There might be the Mac HD. Check that if you want the HD window opened after bootup.

  • Same window opens in Finder every time I log in

    Any idea how I can prevent the pl.lproj window from opening every time I log in? Thanks!

    Sorry about that! Yes, I should have mentioned it.
    Anyway, I created a new admin account and as you suspected the window did not open at login. The account I'm logging in with is a network account and the "opening window" does not follow the account to other Macs.
    I trashed the com.apple.finder.plist file and at login it created a new one but the window still opened. Sigh...

  • In the last week my Imac (OS Lion) has started opening two to seven programs every time I log in.  Why?  How do I stop it?

    In the last week my Imac (OS Lion) has started opening two to seven programs every time I log in.  Why?  How do I stop it?  I think it started after I was led to do something I can't remember with Terminal.app.

    If they have open windows/documents from your last use of the application, try going to System Preferences/General and check the 'Close windows when quitting application'.

  • I get a blank word document opening every time i reboot my iMac after upgrading to OS Lion.

    I get a blank word document opening every time i reboot my iMac after upgrading to OS Lion. ANy ideas how to get rid of it? I have uncheked everything in mu users and groups and unchecked restore windows in the general file.

    When you logout did you uncheck the Reopen windows when logging back in check box at the bottom of the logout window. 

  • I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?

    I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Web page opens automatically every time I log in to ask me why I uninstalled their program

    I was a member of the Nielson Digital voice program and had their software installed on my laptop, it kept crashing and I had to uninstall it and re install it every time I tried to use it so I uninstalled it. Now every time I log onto my computer and open the browser, their web page questionnaire opens in a new tab to ask me why I uninstalled their software. How do I make this STOP? I have answered it twice and it still keeps coming back.

    I was a member of the Nielson Digital voice program and had their software installed on my laptop, it kept crashing and I had to uninstall it and re install it every time I tried to use it so I uninstalled it. Now every time I log onto my computer and open the browser, their web page questionnaire opens in a new tab to ask me why I uninstalled their software. How do I make this STOP? I have answered it twice and it still keeps coming back.

  • Every time i log in all my programs open up, how do i close these program so the do not open upon log in?

    every time i log in all my programs open up, how do i close these program so the do not open upon log in?

    Open System Prerferences > Users & Groups > Login Items
    And check  HD > Library > Startup Items

  • Network assistant launches every time I restart

    Can anyone tell me why the network assistant launches every time I restart my computer?  I am already connected to my wireless network so I'm not really sure why it needs to create a new location every time. 
    thanks

    Dealing With The Resume Feature of Lion
    Managing Mac OS X Lion's application resume feature.
    If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
    It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
    If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
    chflags nohidden ~/Library
    Press RETURN. Quit the Terminal application.
    In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
    Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
    The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.

  • Message: "The database structure has been modified" every time I log to SAP

    Hello,
    "The database structure has been modified. In order to resume this process, all open windows will be closed". Every time I log to one of my companies in SAP Business One this message appears.
    I haven't installed any new addons and made no changes in database structure (and any other user hasn't done any changes), but this message appears always when I log to company for the first time (when I try to log on another user or log to another company there is no message). Can anyone help me with this problem?
    Best regards
    Ela Świderska

    Hi Ela Świderska,
    You may check this thread first:
    UDFs disappeared
    Thanks,
    Gordon

  • Every time I log into my mac photobooth pops up. How do I get it to stop poping up every time I log on?

    Every time I log into my mac photobooth pops up. How do I get it to stop poping up every time I log on?

    Right click (cntl-click) the icon on the dock.  Look at options and uncheck Open at Login.
    Regards,
    Captfred

Maybe you are looking for

  • No Fact Table exits at the requested leve of detials

    Hi All, I am getting the follwoing error..while am into Oracle Answers... Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returne

  • Capturing video from Sony  DCR-SR32E to Final Cut express

    I have a Sony DCR-SR32E camcorder and visited the Genius Bar recently, it appears it's one of the few camcorders not supported in iMovie and was told by the genius that I needed to ask Sony for an mpeg-2 codex. Sony re-directed me to search for one o

  • How to retrieve Data from SAP BW to  SQL

    Hi All, i am looking for way to retrieve Data from SAP BW to SQL. Could you please give me some indcations or a document on how to implement it? Thanks in advance Cheers Gilo

  • IPad 3G losing signal

    Hi there I have an iPad 4 32GB wifi and 3G. The problem is that it keeps losing the 3G signal, it says "no service" so then I have to restart it, which becomes a pain every time I want to use it. When it has finished restarting, the signal strength i

  • Usb blues

    I have a 6738 km2m motherboard .I can use a usb mouse  and a usb scanner  and boot up fine .But if  I plug in my usb zip drive  my computer will not boot up.I tried just the zip drive by it's self no luck.I think it is a bios problem .It freezes befo