Lion shutdown problems

Sometimes it shutdowns properly and sometimes not. A lot of changes appeared after I started using AppleScript, Textmate, Little Snitch, FreeMemory and TinyExpander.....any guess who can be the culprit ?
Also a few days ago it was hanging sometimes or getting very slow at times.So I did a Google search and followed some instructions given.It was sometihing like deleting some files that I've no idea, probably something like plist document.Overall I don't have any idea what's causing it.
Somebody please help me. Thanks

You should be more specific, I've never had a shutdown problem and would attribute that to hardware not software.
If I were you I would wait for an update to Lion for a fix, not a brand new operating system that has potential unforeseen bugs in it.
But you can do what you please, although I don't think you will get what you want if that is all you're looking for.
Sometimes an update or a reinstall of Lion will fix issues for free. Try posting your specific issue in the Lion section and see who bites. You may also want to try making an appointment at your local apple store or calling 1800 apl care.

Similar Messages

How im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

how im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

What "auto shutdown problem" are you talking about?

10.6.8 and Lion wifi problem

hello,
I am trying to use my mac for one week...... ;(
everything was fine until update to 10.6.8... wifi problem as many of you already know. tried to update to lion, same problem. Got back to 10.6 and then update to 10.6.8 using software update... then formatted again, fresh install 10.6 update to 10.6.8 using combo update, same problem.
tried to delete firewall file, turned off ipv6, changed security of my router from wpa2 to wpa, tried different channels, reset SMC and RAM, all the solutions we can research... all the same
now I am on 10.6.7 and seems i still has the problem happening....
hello apple, more than a month and no solution yet????
I've read somewhere a new procedure that consists in update to 10.6.8 and before restart do some procedures.... but I can't find it anymore, any help?
I guess that solution is the only one remaining I did not try yet.
thanks and regards,
raul

well, it's caused by software only, there is nothing wrong with airport hardware
hard to believe, it's like windows old time sake, loosing precious days fighting with a computer...
too bad apple

Random shutdown problem on G5 dual 2.3 GHz w/OS 10.4.7

Hello,
I’m using a dual 2.3 GHz G5, and it’s been working flawlessly since I bought it about a year ago. Until yesterday, I was running OS 10.4.5. Yesterday I upgraded to 10.4.7, and as soon as I booted up after the install, I started having a maddening problem with my computer randomly shutting down. (Not sleeping, but a complete power down.)
At first, the shutdown would happen immediately after powering up; my computer wouldn’t even make it to the blue progress bar. I zapped the PRAM and tried something I found online about unplugging the computer for 15 seconds, then plugging it back in. It now boots up, and I can log in, but the computer still shuts down randomly.
There seems to be no pattern to the shutdowns. I tried taxing the processor by opening and resampling huge Photoshop files while lots of other apps were open, and things were fine. Then it would conk out while I was composing an email.
I’ve heard of this random shutdown problem affecting Macbooks, but I have yet to find anything about G5 towers and OS 10.4.7. Does anyone have any info/advice?
Many thanks.
G5 dual 2.3 GHz Mac OS X (10.4.7) 2.5 GB RAM, 250 GB HD
G5 dual 2.3 GHz Mac OS X (10.4.7) 2.5 GB RAM, 250 GB HD

Thanks for the advice. I did check the system.log in Console and found the following altert:
PMU FORCED SHUTDOWN, CAUSE = -122
Now, since my computer is just over a year old, and since this problem happened immediately after applying the 10.4.7 OS update, I found it hard to believe that my hardware could be responsible. After 2 days of troubleshooting, I was stumped; after a 2-hour service call, so was Apple tech support. I ended up doing an archive and install back down to 10.4.5, and all is well.
I tested this issue on other machines running 10.4.7 and had no problems. It seems that the following specific combination of elements triggered the problem:
• PowerMac G5 dual 2.3 GHz (dual 1.8 machines did not exhibit the same problem)
• OS 10.4.7
• Logging in with Open Directory/Active Directory mobile profiles
• iTunes 7
Bottom line: if you’re using a dual 2.3 GHz PowerMac with mobile OD/AD profiles, do not update to 10.4.7, and steer clear of iTunes 7, at least until there is a patch update available.
(And Apple wants to be taken seriously in the enterprise market?)
G5 dual 2.3 GHz Mac OS X (10.4.7) 2.5 GB RAM, 250 GB HD

Clock problem and shutdown problem! Are they related?

Having a problem with my Dual 2 GHz Power Mac G5
A few days ago I noticed that my clock was not showing in the menu bar in the upper right corner of my desktop.
I went into System Preferences and went to Date & Time. Under the clock tab “Show Date and Time in Menu Bar” the box was not checked off. I checked it off and went to the “Date and Time” tab. The date and time was correct. I then checked the box “Click the lock to prevent further changes” to lock it. The date and time did not show up in the menu bar. I then went back to the tab “Show Date and Time in Menu Bar” and the box I checked was not checked off even thought the lock was still locked.
I then moved my cursor up to the menu bar in the upper right corner to see what would happen and the spinning beach ball started up but only for the original icons such as Bluetooth, Mobile Me (which I do not use), Time Machine, Spaces (doesn’t indicated the number when I switch Spaces, etc. The icons Norton Anti Virus and Tech Tool Pro in the menu bar are okay.
Also, when I attempt to shut down my computer the system clears the icons from my desktop except for a picture I have on my desktop and I get a gray wheel spinning and the system just hangs until I press and hold the on/off switch. I don’t know if the clock and shutdown problems are related.
The only new software I loaded recently was Skype with Logitech WebCam for the Mac and Quicken 2007 (Had a problem with Quicken 2006). They both are working okay.
And ideas on why I cannot get my clock to show up and my computer to shutdown?

You may have to consider a new post in the Hardware forum area for the computer
model and build/year; if there is a possibility of some basis the matter could be in
the machine and not the software running within it.
Your last two/three posts are in the Leopard 10.5(.8) forum area and do indicate
some kind of problem where troubleshooting the computer to discover if the matter
at hand would be either hardware or software based, may be the way to go.
The link to the 10.6 Snow Leopard forum won't be of help if your computer is a
PPC-based G5 tower, or other older pre-Intel configuration. And I remember
your earlier questions about the iMac G4 and some other issues in the past.
You may ask the moderators to put your post in a new thread of its own, in the
Leopard 10.5 area; so as to not 'piggy-back' another topic; even though some
of the odd issues you've had seem similar to this OP's topic line and appear to
be in the same general series of hardware. {The question here seems valid.}
The routine suggestions to check, test, verify, and perhaps repair or replace
the system; save a bootable clone to suitable external standalone device if
testing a suspect computer's viability is recommended; and the basics if not
already tried to help isolate the issue(s) as you've posted elsewhere, may be
of some help to try and do; so in that matter, a new thread of your own is best
for your own directed feedback. Since this kind of advice applies to most any
situation, including troubleshooting what may be hardware or software, I'm
adding my two and three-tenths cents worth here.
Your original included Apple Hardware Test may be of some help, in the process
of elimination; but is not conclusive, so other methods would be also suggested.
Some ideas appear to cover the same ground. However, system corruption or
disc failure can also manifest itself in odd ways & affect things indirectly for a time.
• OS X Maintenance And Troubleshooting
http://www.macattorney.com/ts.html
• Mac OS X BASIC TROUBLESHOOTING & MAINTENANCE
http://www.gballard.net/macrant/osx_troubleshooting.html
• Troubleshooting Tips for computers:
http://www.stcdio.org/offices/cem/mediaandtechnology/cem-computer-classes/troubl eshooting.html
So, at the risk of inadvertently alienating the OP, I am posting this as
a general help to following readers at some later time; and it may not
be too simple for a refresh course.
Some software issues can be resolved by repairing disk permissions,
and re-applying the last OS X update Combo file over the same one
already in the system; or if not up-to-date already, check & repair all
the general items and then apply the last Combo update.
A too-full hard disk drive can compromise the system integrity, so that
is a matter of course to keep up on what resources exist and remain
for the OS X to function correctly and for apps to multi-task together.
However that works out...
Good luck & happy computing!

Are the replacement Heatsinks fixing people's Random Shutdown problems?

Is the replacement heatsink (the shorter one) still the method of choice from Apple for fixing Random Shutdown problems?
Is it working for people who've had it done recently?

Does this max out the CPU?
Yes. People who advocate this are testing to see if it's possible to induce a "random" shut down.
Why would anyone want to do that?
Good question. I've seen two reasons put forward: (a) It's better to make it happen now yourself rather let it strike out of the blue at some later date (and if running this test doesn't induce RSDs you can feel confident that your computer is probably immune); (b) If you take your MacBook to an Apple Store it could be useful for demonstrating to an Apple "genius" that your computer has the problem, especially if your shutdowns are infrequent.
(personally, I don't agree with (a))
MacBook (OS 10.4.8) iMac G4 (OS 10.3.9)

Late 2013 13"MBP-Shutdown Problem

I was having shutdown problems with my Late 2013 MBP 13"-the MBP would go to the gray screen and the small pinwheel would progress to different hash marks every 3-5 seconds, the machine would not shutdown at all, it was stalled, so I called Apple and we trouble shot. During our troubleshooting adventure it dawned on me that the problem could be related to my Antivirus Software-Intego. So I went ahead and disabled the real-time scanner and...viola, it shutdown with no problem. So I am letting people know that as of currently, Intego's real time scanner could cause issues during shutdown. I placed it on a scheduled scan and placed everything else on; no issues now.
So my only question would be; I have the same antivirus software on my early 2012 15" MBP with no issues. Though, I do remember having very slow shutdowns for sometime and then it seemed to resolve itself. The major difference in these two machines appears to be, besides the retina displays, the mechanical HDD vs SSD. My 15" (early 2012) has two Mech. HDD while the new 13" has of course SSD. I am thinking the antivirus software isn't handling the SSD appropriately.
Any-how, I just wanted to give a quick (though detailed) heads up.

OK, I messed around with this issue over the weekend. Here's what I did:
1. Used iPad 3 until I have run battery down to about 50%
2. Plug in to left USB port on Late 2013 rMBP. Battery icon starts displaying "flip-flop" behavior.
3. Replug into right side USB....no problem, all behaving well.
4. Tried plugging in my iPhone 4s into same cable on left USB port, no problem.
5. Replug iPhone into right side USB....again no problem, all behaving well.
Here's where it got interesting:
6. Exchange charging cable for a newer cable with the smaller-sized 30-pin dock connector.
7. Plug iPad into left USB port...and viola! Battery charging icon is steady...no "flip-flop"!
8. Replug into right side USB....no problem there either, all seems normal.
I have no idea what's going on, but this seemed to have solved prolem. BTW, the older cable, when plugged into wall charger, charges the iPad just fine.
Hope this helps someone else with this problem.

Shutdown problems

I tried updating to 10.5.6 this evening (I should have read these forums first to be forewarned...but anyway..). I was prompted to restart and ever since I have had difficulty shutting down. All icons, the dock, desktop and menu bars switch off (as usual) and the screen goes to blue and just sits there. The HD is spinning and the screen goes from a light blue to a slightly darker shade of that blue and the cursor shows up on the screen as well. But the computer just doesn't shut down.
Is there a way to force shutdown (other than holding the power button down)??
Also, what can I do to help fix the problem.

I ran disk utility and no apparent problems came up.
I then went hunting in other threads for clues and found a link to the Apple download updates page which gave me an idea.....
Since my shutdown problems started when I was prompted to restart for the 10.5.6 update I thought to re-install the 10.5.5 update.
This seems to have worked. No idea why 10.5.6 would lock up the shutdown process but at least I get a clean shutdown now.
Anyone have a similar issue??

Need more info - same spontaneous shutdown problem...

I'm using a very trustworthy 2.5 year-old T500 running Vista SP2 32-bit and my laptop has begun to have the same spontaneous shutdown problems as other users who've written here. I suspect it's overheating. I normally use my T500 on a docking station, which may or may not exacerbate an overheating issue.
I want to address this problem to ensure that I can continue to progress on my PhD dissertation (!) without crises, so I have taken some of the steps previously recommended for this problem here on this board. I installed TPFC today to begin monitoring CPU temperature and it appears that it runs between 55 and 65 C. Other temps listed are lower. I also made necessary adjustments in Power Settings to maximize fan speed and allow CPU speed to float. I also removed the battery so I'm using AC power with no battery/recharging processes to add to the problem, though I'm not certain that last part will make any difference.
I want to also clean the fan since I'm sure it's probably dirty after 2.5 years of continous use in my house. How can I take my laptop apart to clean the cooling fan? Or is this something I should take it to a repair shop to accomplish?
Thanks in advance for your advice.

No, my machine is not under warranty any longer. I agree, if it was, there's no way I'd risk voiding it by tearing it apart myself.
Thanks for causing me to double check. I DO have a few months of warranty left, so this baby is going to a professional! I could probalby do it myself, but why risk it?

Suddenly shutdown problem. (iphone 4s)

My phone suddenly shutting down (every day) (when I check my screen it is blank and I am swiching on every time), sometimes I need to use soft reset to able swich on.
Do you have this problem in you phones?
my ios is 5.0.1.

I restored with Itunes, but I have still same problem
Settings>General>About>>Diagnostic & Usage>Diagnostic & Usage Data>2012-01-03-211019.panic.plist
show me that I have hardware problems.(In forums I saw that if we have panic.plist it's mean that I have hardware problems, am I right ?
*In 10 days, It was happend 4 times (shutdown problem), after restore It was happened 1 time.

Since installing LION having problems getting photo images to upload?

since installing LION having problems getting photo images to upload? anyone else havie this problem? I did finally get a message that the format was wrong, but I have changed nothing on my camera. Only change was the installing of LION.

This is from the Kodak site which says there is no Lion compatible driver/software yet, but it is coming in late August:
http://support.en.kodak.com/app/answers/detail/a_id/41646/kw/os%20x%20lion/selec ted/true
If you don't want to wait there is always this kind of device for less than $10 (I don't own or endorse it):
http://www.walmart.com/ip/Moultrie-USB-2.0-SD-Card-Reader/14972138

After a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

after a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

Leopard (10.5 & 10.5.1) shutdown problems

I just got a brand new 20" iMac with Leopard. When I started it up I migrated user settings (but no applications) over from my 12" PowerBook G4 (in case that is relevant).
A few of the times I went to the "apple" menu to shutdown the computer, the spinning gear/wheel looking icon came up and the computer did not shutdown. I had to hold the power button down in the back to reboot it.
Also, I installed 10.5 -> 10.5.1 upgrade. At the end of the installation process it said it was updating the "boot cache" and would reboot when it was finished. After an hour it was still spinning, so I manually rebooted the machine.
I am still having shutdown problems.
Any help is greatly appreciated. I backed up all my important files and am thinking of reinstalling Leopard from scratch and going from there. Is this an easy task?
Thanks,
JRF

Hi JRF;
Since you admitted to forcing the iMac to shut down a number of times, it is very likely that you have corrupted the disk. I would suggest as a start that you boot from the install media and use Disk Utility to repair the disk. Hopefully that will be able to repair any disk corruption that you may have caused by your forced shutdowns.
Allan

ASM shutdown problem

Hi experts,
suddenly I faced ASM shutdown problems on a 2 node RAC. While trying to reboot the second node the resource ora.asm can't be shut down.
After 10 minutes the shutdown of ASM times out. There is an interesting line in the ohasd.log saying that ASM can't be shut down due to error code: 3.
Does anyone knows what this means? I googled hours and hours without any success, even in MOS I found no further informations.
Help is greatly appreciated!!!!!!
Thanks a lot
Volker
P.S. My environment:
- 2 node RAC OEL 6.3
- 11.2.0.4 Oracle Enterprise Edition

Hi gurus,
I noticed that the shutdown of the ASM instance went wrong as part of the OHAS. Unfortunately I have no error stack except this numerical error written in the ohasd.log.
Below you can find an excerpt of the ohasd.log:
2013-11-15 00:44:12.730: [
AGFW][2791917312]{0:0:124} Received the reply to the message: RESOURCE_STOP[ora.asm 1 1] ID 4099:724 from the agent /u01/app/11.2.0.4/grid/bin/oraagent_oracle
2013-11-15 00:44:12.731: [
AGFW][2791917312]{0:0:124} Agfw Proxy Server sending the reply to PE for message:RESOURCE_STOP[ora.asm 1 1] ID 4099:723
2013-11-15 00:44:12.731: [   CRSPE][2781411072]{0:0:124} Received reply to action [Stop] message ID: 723
2013-11-15 00:44:12.731: [
INIT][2781411072]{0:0:124} {0:0:124} Created alert : (:CRSPE00111:) : Stop action timed out!
2013-11-15 00:44:12.731: [   CRSPE][2781411072]{0:0:124} Stop action failed with error code: 3
2013-11-15 00:44:12.732: [
AGFW][2791917312]{0:0:124} Received the reply to the message: RESOURCE_STOP[ora.asm 1 1] ID 4099:724 from the agent /u01/app/11.2.0.4/grid/bin/oraagent_oracle
2013-11-15 00:44:12.732: [
AGFW][2791917312]{0:0:124} Agfw Proxy Server sending the last reply to PE for message:RESOURCE_STOP[ora.asm 1 1] ID 4099:723
2013-11-15 00:44:12.732: [   CRSPE][2781411072]{0:0:124} Received reply to action [Stop] message ID: 723
2013-11-15 00:44:12.732: [   CRSPE][2781411072]{0:0:124} RI [ora.asm 1 1] new internal state: [STABLE] old value: [STOPPING]
2013-11-15 00:44:12.732: [   CRSPE][2781411072]{0:0:124} CRS-2675: Stop of 'ora.asm' on 'rac2' failed
2013-11-15 00:44:12.733: [   CRSPE][2781411072]{0:0:124} RI [ora.asm 1 1] new internal state: [CLEANING] old value: [STABLE]
2013-11-15 00:44:12.733: [   CRSPE][2781411072]{0:0:124} Sending message to agfw: id = 925
2013-11-15 00:44:12.733: [   CRSPE][2781411072]{0:0:124} CRS-2679: Attempting to clean 'ora.asm' on 'rac2'
2013-11-15 00:44:12.733: [UiServer][2779309824]{0:0:124} Container [ Name: ORDER
MESSAGE:
TextMessage[CRS-2675: Stop of 'ora.asm' on 'rac2' failed]
MSGTYPE:
TextMessage[1]
OBJID:
TextMessage[ora.gpnpd]
WAIT:
TextMessage[0]
There are other error messages as well telling that one have to wait for the shutdown of the ASM instance. But no one is telling me the reason for that.
Regards
Volker

Strange shutdown problem

Hi,
Last night, I had a strange shutdown problem on my iMac G5 (revB, 20", 2.0 Gig), with 1 Gig RAM, running 10.4.4 with all updates. I had had the computer on most of the day, using it off and on. I shut it down, and left the room. When I came back about an hour later, the fans were running (not rapidly, just at the normal speed they run when the computer is running), but the screen was blank, and the "sleep" light was not on. The computer wouldn't respond to any moving the mouse or to keyboard input. I finally shut it down by holding the power button until the fans shut down. Upon restart, everything was normal, and after using it for a few minutes, I was able to shut it down normally. Has anyone else seen this sort of behavior, and is it normal ? Or am I about to have more problems.
Thanks in advance,
Dave Fritzinger
Honolulu, HI

Hi Dave,
By the sound of it your computer has "hung" during the shutdown process, but at a point in the process where the system's temperature control mechanisms were still operating (otherwise the fans would be running flat out). My guess in this case is that it was probably actually a finder crash.
Various things can prevent proper shutdown. Often USB or FW devices are to blame. USB adsl modems , some scanners and hubs and the occasional printer driver seem to be common causes. Software can be responsible too, though - background virus or drive checkers are probably the most common, but far from the only possible causes ( I seem to remember "SpringCleaning" causing this problem when people moved to Tiger 10.4.2 for example) .
New software or hardware are therefore the first things to look for.
If you haven't installed anything completely new then one possibility may be that something you are using is not compatible with the latest OS update, and needs an upgrade to a driver. Its also possible that this is a "one off" glitch caused by a temporary problem , but if it happens again I'd be taking careful note of anything that you were using in the previous session.
You might also want to use the Console (in Utilities folder) to look at your system and crash logs.
Cheers
Rod

Lion shutdown problems

Similar Messages

Maybe you are looking for