Lion to Win7 (bootcamp) Sharing just Stopped

I have all my music on my macbook pro running lion (the newest version).
On my Mac Pro which I run in bootcamp, all of sudden, my shared library no longer shows. I have the newest version of iTunes on the bootcamp side of the Mac Pro as well. It worked fine for ever, but now it just stopped showing up. The only thing I can think of that changed was updating Lion to 10.7.5 (on the computer that is hosting the music).
On the Lion side of my Mac Pro, sharing works fine, which leads me to believe it is a setting in Win7 or something. I checked my firewall in Windows7 and there is a rule to allow itunes so I am unsure what the issue could be.
Any help would be appreciated!

UPDATE
Ok so I think it is somehow related to my Mac Pro (Bootcamped in Win7 64bit).
If I switch from my Local Area Connection for my Wireless connection, homesharing works.
So using wireless I can home share, but using a wired connection it does not. Both the Local Area Connection and the Wireless had the same exact settings (IPv6 etc...).
Screenshot: http://tinyurl.com/9qvwh2w
Really I am just curious why this is the case. I do prefer a wired connection so I am hoping to get to the bottom of this.

Similar Messages

My internet sharing just stopped working

My internet sharing just stopped working mysteriously. I repaired permissions, I restarted my machine. I also renamed my Internet Sharing network. Any ideas?

OK somehow after a couple restarts it fixed itself. ANy idea on why it did that?
Thanx for any help

TS2972 enable my tv entertainment provider on my home network - then updated "a newer" modem and now home sharing just stopped home sharing

Only 2 changes to my home network set up: #1 - I installed a "new model modem" recommended by my ISP provided, and #2 I had my tv entertainment provider install their modem to the TV receiver box for accessing my home network and now home sharing will not home share.
I original had enabled, and all devices are still set up for home share - that's laptops, iphones, ipods, and ipads.
Any suggestions? I understand these modem most have ports 123, 3689, and 5353 opened for itunes and the home sharing.
Now I am stumped on how to verify these settings.
Is it possible for me to verify these ports on these modems; how? Or is it just wiser to contact these providers and have their technicans investigate this issue? OR is it possible I am missing an even easier route to cure this ailment I have created unintentionally in my quest for connectivity between all things electronically capable and on the same secure network?
Oh, using PC w/WDW7 if this helps, and one other annoying detail, which confuses this entire issue of mine, the Home Share, pops on for a few minutes, and then disappears. So yes, I am confused, it is there, and then it is not!.

Scan the Support Community sites. Apple TV losing connection is prevalent. The many postings point out the problem occurs with Apple TV1,2and 3; with different brands of router including Airport Extreme; from current and past versions of iTunes; after varying periods of working well.....minutes, hours, days; losing connection with Home Sharing and loosing Airplay; whether the router and Apple TV are in same room or separated by distance; after trying innumerable posted 'fixes'; after exchanging for a new Apple TV.
Readers, please don't post a fix until you check it works for atleast a week.

I can't download LIon OS. It's just stopped and says "waiting."

I was downloading OS X Lion and it started up after clicking the pause button a few times. Then it stopped and said "Waiting." I restarted my computer and clicked on purchase in the App Store and got the above messayge. I don't believe that a download should take 16 days. I have been clicking on the pause button but it doesn't change anything. It keeps the 16 days or gives me "Waiting" as shown below.
I am so frustrated. What should I do?

Try this
First disconnect your WiFi and if your downloads fails, so that you can remove it and download again from purchased history.
If it doesn't work, go to application folder try locating lion.app and delete it completely out of system and try downloading again.

SMB File Sharing just stopped working

About 3-4 days ago I found I could not connect to my MacPro via ANY of my computers, Mac and PC alike. If I do a "+netstat -an | grep LIST+" I do see...
tcp4 0 0 *.139 . LISTEN
but if I do a "+lsof -nl | grep LIST+" all I get is...
GoogleDes 174 503 5u IPv4 0x7011e64 0t0 TCP 127.0.0.1:profilemac (LISTEN)
AppleVNCS 178 503 4u IPv6 0x5c66b2c 0t0 TCP *:vnc-server (LISTEN)
and don't see any other listening services. Perhaps the two most glaring items is that when I look in /private/var/log/log.smbd file I see this...
2008/07/20 18:48:47, 0, pid=13382 /SourceCache/samba/samba-187.7/samba/source/profile/profile.c:profile_setup(241 )
ERROR: we did not create the shmem (owned by another user, uid 503, gid 503)
2008/07/20 18:48:47, 0, pid=13382 /SourceCache/samba/samba-187.7/samba/source/smbd/server.c:main(915)
ERROR: failed to setup profiling
... and if I do "+launchctl start org.samba.smbd+" I get this...
launchctl start error: No such process
and if I do "+smbclient -L localhost+" I get this...
Receiving SMB: Server stopped responding
protocol negotiation failed
And yet under System Preferences->Sharing I have "File Sharing" checked, a shared folder set up and myself as the user with Read/Write privileges and under options SMB is checked and I have my name checked under "account". This is as it has been for months.
Obviously my Samba is "injured" and I've run out of ideas on how to fix it short of reinstalling my OS and NOBODY likes reinstalling their OS... nobody.
Anyone have any ideas on what might be going on or more importantly how to fix it? Nothing... absolutely nothing changed on my Mac side when this happened... hadn't even done a reboot in over three weeks.
I'm baffled.
TIA

I had the same issue,
[2008/12/29 17:32:03, 0, pid=20851] /SourceCache/samba/samba-187.8/samba/source/profile/profile.c:profile_setup(241 )
ERROR: we did not create the shmem (owned by another user, uid 501, gid 501)
[2008/12/29 17:32:03, 0, pid=20851] /SourceCache/samba/samba-187.8/samba/source/smbd/server.c:main(915)
ERROR: failed to setup profiling
From Terminal I ran
% ipcs -m
T ID KEY MODE OWNER GROUP
Shared Memory:
m 65536 0x07021999 --rw-r--r-- langdt langdt
m 65537 0x60022006 --rw-r--r-- langdt langdt
I saw two shared memory entries owned by me (langdt uid 501), I assumed that smbd was trying to run as root and failing because the shared memory already existed. To remove the shared memory
% ipcrm -m 65536
% ipcrm -m 65537
Then smbd was able to start and create the shared memory that it required, rerunning ipcs I could see the shared memory now owned by 'root'.

HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works

Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works can you help

Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

Share iTunes Library between OSX and Win7 Bootcamp

I've done quite a bit of research on this but I still haven't found a solution that does what I require.
Basically my setup is a SSD & HDD in my MBP. I have OSX and Win7 (Bootcamp) on the SSD and the NTFS HDD is a shared file storage drive for both Windows and OS. I have my iTunes library located on this drive and I want to be able to share the library between the OSs. I also want changes e.g. additions deletions made in windows to be reflected in OSX and vice versa.
Technically this is possible and does in fact work if I point iTunes to the .itl file but the problem is that when I open iTunes after switching OSs it must go through a very lengthy library update which can take 30-60mins in some cases before I can use it. Obviously this is not a good solution so I'm wondering if there are any workarounds to accomplishing this?
For example can I duplicate the .itl file and have one for win and one for OSX and still have the libraries stay in sync?

Just for your info, Vista ***** whatever you try to do. I'm stuck with Vista on a pre-installed laptop. All experience I have from Vista is bad, don't buy Vista or a computer with preinstalled Vista if you can avoid it.
We have three computers in a home network, one Macbook Pro, one PC with Windows XP, and the Vista laptop. All are using iTunes-8, downloaded and installed last week.
Sharing iTunes libraries using the option to share libraries on a local network works fine between Mac and Windows-XP. The sharing also works fine between the XP and the Vista PC.
But the Vista PC can't access the Mac iTunes library. When trying to open the Mac library, iTunes on the Vista computer says something like "Fetching library info from...". It's the same problem when trying to access the Vista library from the Mac.
We had a similar problem when trying to access shared folders on the local network. Thanks to a tip on this forum how to tweak the Vista registry, the shared folder problem was solved.
I'm think some registry setting in Vista might solve iTunes shared library problems. Maybe some Windows freak knows how to patch the registry to solve this issue.
Otherwise the solution is to trash Vista, and install Windows-XP.

Lion install in BootCamp. Now "Missing Operating System"! Help!

Just installed Lion w BootCamp on a white MB and now when I boot to the Win7 side, I get "Missing Operating System". Any ideas how to fix this?
Thanks in advance.

This is the same problem that I find myself. Help me.
Este es el mismo problema en el que me encuentro.
Re: Lion install in BootCamp. Now "Missing Operating System"! Help!
02-ago-2011 4:49 (in response to William Cochran)
hey can you tell me how to do that?
because when I press the option/alt button on the keyboard, there's just two boot source option , because before upgrade into lion, I have windows 7 too in my mac
There are only two boot option : 1.Macintosh HD , 2.Recovery HD
I just finished downloading the Bootpicker, and got no idea how to use it to change the boot and getting back my windows 7, I have lots of critical data in there

Internet sharing suddenly stopped working - please help!

I have been sharing my internet for weeks from my computer but this morning it suddenly stopped working. I've tried changing the password, changing the channel number, and changing the Network name to a simple one, but it is all not working Apparently the authentication server is not responding? How can I fix that?

I'm having the same problem. I had internet sharing set up on my iMac from Ethernet via AirPort, and received quite well on my MacBook and iPod Touch, and then one day, it just stopped working. I'm assuming that some update or other caused this problem, but I have no idea which (I mostly use the internet on my desktop machine, so it may have been several days before I noticed the problem). I've tried with-and-without a password, and also tried sharing from my MacBook to the iMac and iPod Touch, and I can't get any bandwidth (I can connect to the 802.11 network that I create, but I can't get any internet through it).

Bluetooth has just stopped working

Here's the background information:
1. I've been working with a Mighty Mouse via a D-Link DBT-120 Nodule since the MM came out and everything was fine.
2. Spilled orange juice on it and got a new one.
3. New one worked for about three weeks and then just stopped connecting.
4. I replaced the existing batteries (that were as old as the mouse)... nothing.
5. I started going through the posts and trying the different remedies (e.g., pulling out all USB and Firewires before rebooting, et al.)... nothing.
6. I paired the mouse with two other computers (both Intel) and it works.
Here's the part I haven't read about:
I just went to System Preferences, clicked on "Bluetooth," and my System Preferences got hung up (spinning ball) for about three or four minutes while the top of the window said "Loading Bluetooth...". Once in, all four checkboxes were checked. I clicked on the second tab "Devices" and it hung again. Same for the third "Sharing." To write this post, I just tried it again, and the same thing is happening.
As for other devices, I was able to connect to my phone until this morning, and now I can't connect to that either (just installed the latest security update over the weekend).
Any help is appreciated? Should I get a new nodule? Different brand of nodule? Thanks for any help anyone can offer.
Thanks in advance!
Dual 2.3 GHz PowerPC G5 Mac OS X (10.4.8) PowerBook G4, iMac Intel, Intel Mac Mini, iBook G3

I have similar, intermittent, problem with built-in bluetooth on my PB. A restart usually fixes it, but I haven't permanent solution yet.
Just found this post:
http://discussions.apple.com/message.jspa?messageID=3667900#3667900
I haven't tried it yet (BT working just fine at the moment), but maybe it will help...

Mail just stops receiving email

Mail just stops receiving mail randomly and multiple times through out the day. We are using an in house IMAP mail server. I can use Sparrow, PostBox, etc and it never stops receiving using those clients. All I have to do to get Mail working again is close Mail and then restart. It will work for a few hours then stop receiving. When it is not receiving and can still send. I have IMAP set up on my iPhone and it continues to receive even when Mail stops. It has got to be a setting or something in Mail I just can find what it is. I am running and iMac 3.4ghz, I7 with 16GB RAM, 256K SSD and 1TD SATA, and Mountain Lion 10.8.2. Any assistance would be appreciated. I don't want to use the other clients, I would rather use Apple Mail.
Thanks.

I re-booted and it went away... for now. Will get back to you when it happens again so I can describe it.

Facebook just stops loading, everything else is fine!

So when i'm on Facebook and have a couple of other tabs open at the same time, on a few occasions now Facebook has just stopped responding. All the other web pages are fine and loads things prefectly. I close the Facebook tab, re-open, try to reload and the blue bar moves about 1 inch and then just stops while every other website works fine. What is going on??? I'm running OSX Lion 10.7.4 and Safari V6.0. Any help would be appreciated!
Thanks,
Matt

Matt ...
If you are using Safari...
From the Safari menu bar click Safari > Reset Safari
Select: Clear history / Remove all website data
Deselect the other boxes then click Reset.
Quit then relaunch Safari. Try Facebook.
Clearing history also empties the Safari cache and Removing all website data deletes cookies.

Apple TV Airplay Just Stopped Working

Apple TV Airplay Just Stopped Working. I have a second Apple TV that still works with the same connecting devices and no problems. Running 10.8 on my macbook Retina, iphone 5 is up to date and ipad has latest. One day I went to connect and it wouldn't show on my macbook as an available airplay.
So frustrating, I have reset, re-connected via wifi, turned airplay on and off, checked setting on my machine, made sure I am on the same wifi network... still nothing.

BTW, I should clarify, I am specifically having a problem mirroring. Home sharing is on and all my library is there, just no mirroring.

Why do some keyboard shortcuts just stop working?

Since upgrading to Lion, some of my keyboard shortcuts - especially one for Mail - just stops working now and then and the only thing I can figure out to fix it is to restart the macbook.
The main one I've had trouble with is ⌘+ enter to send a message.
It seems (unreal, I know) that certain messages disable it in replies.
Any other way you can think of to reset the keystroke other than restarting?
Thanks
Tom

Hi there
Sounds like the project has somehow become corrupt. You may need to create a new project and copy/paste slides. You may also find that this will transfer over the issue. So it could be limited to a specific slide or even a single object on a slide.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

VPN working fine.... then just stopped working!

Have posted this before, but was hoping that someone out there has experienced the same issue.
I setup the VPN on 10.6 McMini server and it worked really well for several weeks. Then all of a sudden (without any changes being made to the server) it just stopped working!
I cant get a VPN connection either on the internal network (so no routers involved here) or from external clients. Both of these worked before. Im convinced its def something to do with the server.
The error I get is PPP Server could not be authenticated.
Have tried restarting server, stopping and starting VPN service, turning L2TP and PPP of and on again, changed the shared key.. Checked the DNS with changeip and that is all good....
Hopefully soemone out there will be able to shed some light on this for me...
Here is the log from the VPN :
2011-03-09 09:25:41 GMT Listening for connections...
2011-03-09 09:26:13 GMT Incoming call... Address given to client = 192.168.181.148
Wed Mar 9 09:26:13 2011 : Directory Services Authentication plugin initialized
Wed Mar 9 09:26:13 2011 : Directory Services Authorization plugin initialized
Wed Mar 9 09:26:13 2011 : L2TP incoming call in progress from '192.168.181.161'...
Wed Mar 9 09:26:13 2011 : L2TP received SCCRQ
Wed Mar 9 09:26:13 2011 : L2TP sent SCCRP
Wed Mar 9 09:26:13 2011 : L2TP received SCCCN
Wed Mar 9 09:26:13 2011 : L2TP received ICRQ
Wed Mar 9 09:26:13 2011 : L2TP sent ICRP
Wed Mar 9 09:26:13 2011 : L2TP received ICCN
Wed Mar 9 09:26:13 2011 : L2TP connection established.
Wed Mar 9 09:26:13 2011 : using link 0
Wed Mar 9 09:26:13 2011 : Using interface ppp0
Wed Mar 9 09:26:13 2011 : Connect: ppp0 <--> socket[34:18]
Wed Mar 9 09:26:13 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5934b5e4> <pcomp> <accomp>]
Wed Mar 9 09:26:13 2011 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x239b96e4> <pcomp> <accomp>]
Wed Mar 9 09:26:13 2011 : lcp_reqci: returning CONFACK.
Wed Mar 9 09:26:13 2011 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x239b96e4> <pcomp> <accomp>]
Wed Mar 9 09:26:13 2011 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5934b5e4> <pcomp> <accomp>]
Wed Mar 9 09:26:13 2011 : sent [LCP EchoReq id=0x0 magic=0x5934b5e4]
Wed Mar 9 09:26:13 2011 : sent [CHAP Challenge id=0x6e <497c45160158160c673b40066c697935>, name = "tabloidserver.farnham.fcn"]
Wed Mar 9 09:26:13 2011 : rcvd [LCP EchoReq id=0x0 magic=0x239b96e4]
Wed Mar 9 09:26:13 2011 : sent [LCP EchoRep id=0x0 magic=0x5934b5e4]
Wed Mar 9 09:26:13 2011 : rcvd [LCP EchoRep id=0x0 magic=0x239b96e4]
Wed Mar 9 09:26:13 2011 : rcvd [CHAP Response id=0x6e <b9b67750edb8186d6d48bc0b9d9405d000000000000000002f8f465d892860e169ed20ebab1d33 9aaace5ecd0eb28d0700>, name = "garnettgreen"]
Wed Mar 9 09:28:42 2011 : sent [CHAP Success id=0x6e "S=E6415BFDE46D35DD639BE513051169EEE28ECB44 M=Access granted"]
Wed Mar 9 09:28:42 2011 : CHAP peer authentication succeeded for garnettgreen
Wed Mar 9 09:28:42 2011 : DSAccessControl plugin: User 'garnettgreen' authorized for access
Wed Mar 9 09:28:42 2011 : sent [IPCP ConfReq id=0x1 <addr 192.168.181.122>]
Wed Mar 9 09:28:42 2011 : sent [ACSCP ConfReq id=0x1]
Wed Mar 9 09:28:42 2011 : L2TP received CDN
Wed Mar 9 09:28:42 2011 : L2TP hangup
Wed Mar 9 09:28:42 2011 : Connection terminated.
Wed Mar 9 09:28:42 2011 : rcvd [CHAP Response id=0x6e <b9b67750edb8186d6d48bc0b9d9405d000000000000000002f8f465d892860e169ed20ebab1d33 9aaace5ecd0eb28d0700>, name = "garnettgreen"]
Wed Mar 9 09:28:42 2011 : Connect time 2.5 minutes.
Wed Mar 9 09:28:42 2011 : Sent 0 bytes, received 0 bytes.
Wed Mar 9 09:28:42 2011 : L2TP disconnecting...
Wed Mar 9 09:28:42 2011 : L2TP sent CDN
Wed Mar 9 09:28:42 2011 : L2TP sent StopCCN
Wed Mar 9 09:28:42 2011 : L2TP disconnected
2011-03-09 09:28:42 GMT --> Client with address = 192.168.181.148 has hungup

My Server is OS X 10.6.8 Server, my clients ar all 10.7 but I tested today with an 10.6.6 and it did't work as well.
The protokoll says:
2011-07-28 20:51:28 CEST          Incoming call... Address given to client = 192.168.1.166
Thu Jul 28 20:51:28 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:28 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:28 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:28 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:28 2011 : L2TP sent SCCRP
2011-07-28 20:51:29 CEST          Incoming call... Address given to client = 192.168.1.167
Thu Jul 28 20:51:29 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:29 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:29 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:29 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:29 2011 : L2TP sent SCCRP
2011-07-28 20:51:31 CEST          Incoming call... Address given to client = 192.168.1.168
Thu Jul 28 20:51:31 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:31 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:31 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:31 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:31 2011 : L2TP sent SCCRP
2011-07-28 20:51:35 CEST          Incoming call... Address given to client = 192.168.1.169
Thu Jul 28 20:51:35 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:35 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:35 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:35 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:35 2011 : L2TP sent SCCRP
2011-07-28 20:51:39 CEST          Incoming call... Address given to client = 192.168.1.170
Thu Jul 28 20:51:39 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:39 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:39 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:39 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:39 2011 : L2TP sent SCCRP
2011-07-28 20:51:43 CEST          Incoming call... Address given to client = 192.168.1.171
Thu Jul 28 20:51:43 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:43 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:43 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:43 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:43 2011 : L2TP sent SCCRP
2011-07-28 20:51:47 CEST          Incoming call... Address given to client = 192.168.1.172
Thu Jul 28 20:51:47 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:47 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:47 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:47 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:47 2011 : L2TP sent SCCRP
2011-07-28 20:51:48 CEST             --> Client with address = 192.168.1.166 has hungup
2011-07-28 20:51:49 CEST             --> Client with address = 192.168.1.167 has hungup
2011-07-28 20:51:51 CEST             --> Client with address = 192.168.1.168 has hungup
2011-07-28 20:51:55 CEST             --> Client with address = 192.168.1.169 has hungup
2011-07-28 20:51:59 CEST             --> Client with address = 192.168.1.170 has hungup
2011-07-28 20:52:03 CEST             --> Client with address = 192.168.1.171 has hungup
2011-07-28 20:52:07 CEST             --> Client with address = 192.168.1.172 has hungup
Thanks for any help!

Lion to Win7 (bootcamp) Sharing just Stopped

Similar Messages

Maybe you are looking for