Lion unable to recognize my TM700 camcorder
hi,
I connected my Panasonic TM700 camcorder (AVCHD 1080i/P) via USB cable to my iMac. However, it did not show up in Finder as a camera/device. How can I download the videos from camcorder to iMovie 11 or a folder ?
Thanks in advance for your help.
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Similar Messages
-
Dear Friends,
I have upgraded to Lion 10.7 and I face this issue:
My MacBook Pro unable to recognize my USB modem. It says "USB modem disconnected or unavailabe"
I have uninstalled and installed the USB modem but it shows the same error.
What could be the problem? All softwares are up to date.
Any help appreciatedThanks dobwalls,
I solved my problem with BANYM's BLOG.
( http://www.banym.de/mac/huawei-umts-usb-stick-with-snow-leopard ) Its awsome
I used dashboard installer located on ( http://www.huaweidevice.com/resource/mini/200910149695/testmobile1014/index.html ?directoryId=3874&treeId=0 )
Here are the steps I made to solve this problem:
1) connected my USB stick to my Mac Book Pro.
2) Downloaded the first package on http://www.banym.de/mac/huawei-umts-usb-stick-with-snow-leopard
3) Used the dashboard to find the installation package located in resouarces folder of USB stick.
4) completed the installation successfully
Then it works
Thank you for your answers here, it was a big help to find this solution
Best Regards. -
My iMovie refuses to recognize, import, or work with AVCHD Video. It also refuses the same video clips even after I have converted them to Mp4. Also, when I delete a video clip already used in a project, then later import the same clip back to my ipad, the software is unable to recognize and find the clip again! Help! How do I get around these issues?
Hi Craig,
I also got the second problem. The storyboard on iMovie trailer has all these missing videos. If I import them on my iPad it doesn't find them.
If you find a solution it would be much appreciated to share it here ... I'll do the same.
Thanks,
Rafael -
How can i get my mac book pro to recognize a JVC camcorder?
How can I get my mac book pro to recognize a JVC camcorder using a Sony CAMERA USB cord??
Gotta say thank you — again. Sorry the posts were spread out over more than one location. I'll check and see if Third Party Software is considered a "peripheral", maybe that would have been a better single thread choice?
Definitely news we can use and the reference link is appreciated.
OT ~ We keep becoming more and more aware of how easy it is to lose one's bearings when it comes to keeping up with info tech. My husband and I are both official members of the geezer set and have been out of the work force for some years. You really do pick up so much just by being in the environment where people are using things to get work done. A couple of old MP3 players, PPC G5, and a vintage Inspiron 3800 that someone didn't want any more is about it. No cell phone, no iPod, no iPad, no home wireless network, no streaming media. Fixed income. So we do with what we can as long as we can. If we could get by without that Intel processor, we'd probably make do with what we've got. On the other hand, we've really wanted a notebook for a very long time and have to admit that needing to upgrade to accomodate my husband's project is pretty much just the "reason" we need. I really mean it when I say that we are beyond appreciative that users take the time to share info and patiently educate those of us who fall into the "slow tech" category. -
Hi,
I am need of help! I have had this issue for a while now and it's becoming frustrating.
My iTunes installed on my HP Windows 8 Netbook is unable to recognize my iPod, the error message along the lines of "iTunes has detected an iPod but unable to recognise"
I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this??
Someone please help me fix this problem.
Many thanks.
Matt.Hi
So just close iTunes and re-open iTunes thats it and that worked for you?
When you say reset your settings do you mean to factory settings? As my iPod was swapped at the store for a new one and the problem is still there...
Thanks. -
I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?
how new is the Notebook ?
Also double check your firewalls and virus protection that they are not blocking any ports also make sure you are plugging in the fastest USB -
Unable to recognize the server status in OEPE, shows error alert
Hi,
On windows 32 , I installed the WSL 10.3.3 + OEPE and the OSB 11g.
I have configured the a base_domain with a dtabse of 10g (10.3) Express edition.
When I try to start the server from OEPE (Eclipse), the server starts and the console show the server is RUNNING. Even I can connect to OSB Console from Browser.
However, the servers tab in the eclipse unable to recognize the status, and returns back to STOPPED with an Alert message "Server xxxx unable to start.
So I am not able to do anything in the OEPE, its urgent please, any help .
Thanks in advance.
-- KhaleelHi Ravi,
Thanks for the suggestion. Actually the server and domain all are running well. I can start and stop from the startup menus and command scripts.
The only issue is in the Eclipse (OEPE) when I try to connect the server. However I found the solution that I need comment the localhost entry in hosts file as below.
# 127.0.0.1 localhost
Now the server is connecting well. However I have another issue, that I am not able to shutdown the server from startup menus. I suspect the t3 protocal and HTTP protocal related. If you have any suggestions please help me.
Note: if still have issues then try by removing the LAN connection, or install the Microsoft Loopback Adapter.
But I am still looking for options without commenting the localhost in the hosts entry.
--Khaleel
Edited by: Khaleel Shaik on Dec 8, 2010 2:58 PM -
Unable to recognize document as valid XSDCheck the selected category
w.r.t the thread below, any solution expert..
Unable to convert imported document to WSDL --- PI 7.1
in Pi 7.0 XSD is working perfectly... in XML spy its not showing any error. but when i want to upload in 7.1 its giving errror like
Unable to convert imported document to WSDL
Reason:
Unable to recognize document as valid XSDCheck the selected category
what change i should make in the xsd... so that it can be imported in 7.1Hi
What you can do is (in XML Spy) generate a sample XML file from your schema. Make sure you tick of for "Generate all elements".
From the sample XML file that you get, generate a schema (Generate DTD/Schema). This new schema will be different to the one you have, but importing it in PI should work.
When you use it in your message mapping, just make sure that you choose the correct field as the top node and also check that all fields are there (they were in my case and worked as a glove..:).
regards Ole -
How can I get my computer/Final Cut 7 to recognize my old camcorder?
The computer and Final Cut Pro 7 no longer recognize my old camcorder Sony TRV 460. It used to. I tried a new USB cable and it still doesn't work. I'm using Mac OS 10.6.8 which I've used in the past with the camera and have had no problem with it. Any ideas about how to get it to recognize the camcorder? It uses old 8mm tapes. iMovie no longer recognizes the camcorder either.
a) this is the fcpX board ...
b) you need to use a firewire cable, usb no use for miniDV on Macs ... -
since upgrading to LION unable to connect to wifi, in system preferences it says wifi off - cannot override it, what should i do?
While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion
-
Why does my iMac (with Mountain Lion) no longer recognize my external hard drive I have used as a back up via Time Machine after the hard drive was accidentally unplugged?
Do you mean the external hard drive is not mounted on the iMac desktop?
Check if Disk Utility sees the drive. Applications / Utilities / Disk Utility. If the external shows up in the left column, select it and click on Mount.
If it does show up this way, I recommend using DU to Repair Disk. -
Unable to recognize blank DVD+R
When I insert a blank DVD+R into the cd/dvd drive, the system goes through its usual gyrations and then about 15 seconds later the drive bay opens, and there are no error messages. It appears that the drive or system is unable to recognize a blank DVD+R disc.
There isn't a problem viewing DVDs (commercial or superdrive burned discs)
iMac PowerPC G4 800Mhz Flatpanel Mac OS X (10.3.9) SuperDriveApple change the Open Firmware with the 10.4.6 Update! That's the problem that now no DVDs will be recognized by the system.
It's no Hardware problems! It's the software. Burning DVDs was problematical since 10.4.0 and Apple did a worst work.....with every Update since 10.4.4 it's even worster...
So, with the change of the firmware its not possible to burn DVD with Panther or earlier Tiger Versions as well because all of these Mac OS X Versions useing the changed Open Firmware.... :((
So, if Apple doesn't change it one more time you still have a non working SuperDrive on every Release of OS X -
IPad unable to recognize bluetooth device after "forgetting" device.
I recently bought a pair of Sennheiser PXC310 BT wireless bluetooth headphones to use with my iPad. It worked fine until one day a friend pressed the "forget device" option in the iPad's bluetooth menu. Since then the iPad is unable to recognize headphone's bluetooth signal, even though the headphone's bluetooth is turned on. Can somebody please help me reconnect the device? Also restarting has NOT helped. Thanks a lot!
So it turns out that infact this is not an Apple issue, it was a Sennheiser issue. The headphones needed to be reset. http://www.sennheiser.co.uk/sennheiser/products.nsf/resources/DD29E4FD02028BB9C1 257611003F55A9/$File/PXC_310_BT_US.pdf#page21 This helps.
-
I upgraded to Leopard, but now am unable to recognize music CDs. I can recognize data CDs and DVDs, but none of the 10 music CDs I've tried, commercial or homemade is recognized. Has anyone else had this problem?
symonty Gresham wrote:
I was able to fix all issues by zapping pram ( cmd-opt-P-R at startup )
Good. That usually solves these kinds of things. It's like pounding on the TV -
Lion won't recognize my mouse as a Magic Mouse
I have just completely reinstalled Snow Leopard from scratch and upgraded to Lion as well.
I have come to pairing my wireless keyboard and mouse. Both pair automatically but Lion doesn't recognize my mouse as a Magic Mouse so none of the Magic Mouse features (such as scrolling) work. Under System Preferences I do not see all the usual options under Mouse either.
I have tried deleting the mouse in Devices and re-adding it but it never recognizes it as Magic Mouse.Solved!
Lion was automatically adding my Magic Mouse as opposed to be selecting it from the list of found devices when setting up a new Bluetooth device. I waited to select it from the listof devices and it now works. I hope this helps some others'.
Maybe you are looking for
-
DFF in Attachement Document Category (There is no DFF column found in form)
Hi All I want to enabel DFF for the form Attachment -> Document Categories in Application Developer. Table (FND_DOCUMENT_CATEGORIES) has attribute columns, but the DFF [] column is not found in the form. Is it possible to enable DFF for this form?? T
-
SQL Loader fails loading XML data enclosed by tag not found
The problem I'm having is my XML tree doesn't contain all possible elements. In this example the second entry doesn't contain <age> - only the first entry will be added to the database Any idea of how I could solve this? The fields are saved as varch
-
In Production order can i control GR with out GI
hi, case I in the production order the GR should not be done until atleast one component is cosumed as GI . can this be controlled using configuration. case II the GR should not happen untill all GI is done can this be controlled us
-
When i download albums, in my computer folder all tracks have correct song titles, artists, albums etc. However once i "add folder to library" all the tracks appear as "Track 1, 2" etc. I really don't have any time to change all song titles etc. It d
-
What is causing this? traceroute showing timeout on second hop
No matter what I traceroute the second hop always times out. I have an WRT300N router v.1.03.6. I have comcast cable internet with an Arris TM502G cable modem. Here is an example of a traceroute: 1 <1 ms <1 ms <1 ms 192.168.1.1 2 *