Lion update, screen froze and won't restart past white screen!  HELP!

Did the upgrade to Lion yesterday, everything was fine until today.  The screen froze and when I try to restart it freezes on a white screen with the spinning rainbow ball of death!  PLEASE HELP!

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Similar Messages

  • My Mac won't boot past white screen and startup keys won't work

    Hello. I have an iMac not sure what year.
    So about a year ago it froze and wouldn't restart, so I neglected it for a year. Now that this my only fixable Mac I have been researching to fix it. I was able to boot into safe mode about a week ago for a little bit but then it froze again. Ever since then none of the startup keys work, even resetting the PRAM, I heard the second ding and then it just brings up the cursor on the white screen with no disk options.
    I have an external disk drive connected to the USB I'd like to boot my Mountain Lion from but since the start up keys don't work I don't know how to do that.
    Any help would be incredible, I do not care about saving anything from the computer I just want it to work. I hate dealing with the "geniuses" so that's not an option.
    Thanks

    When you hear the startup tone hold down the Option key and you should be able to boot into the Recovery Partition if you have Lion, Mt. Lion or Mavericks on the internal HD. If even the Option key does not work then your keyboard may have dead batteries or be defective and in need of replacement.
    If you have ML on the EHD as a bootable clone then you should be able to boot from it.
    My best guess is you have a failed HD though, my advice is to take it in for professional diagnosis to your local Apple Store or AASP and get a quote on what is wrong then decide  how you want to proceed.

  • NAND script and won't load past apple screen

    My I phone 5 has crashed won't load past apple screen and has a list of NAND scripts can anyone help or had this happen

    Standard troubleshooting...
    1. Remove apps from the Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    2. Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    3. Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    4. Restore with your backup.
    5. Restore as new, i.e. without your backup. See how it runs with nothing synced to it.    You may need to try DFU mode (Google for it).
    6. If still a problem, it's likely a hardware issue.

  • Ever since my iphoto library crashed (ran out of space without warning) my mcbook pro has been slow, unresponsive, freezes in sleep mode and won't restart... please help.

    Hi everyone
    Ever since my iphoto library crashed (ran out of space without warning) my mcbook pro has been slow, unresponsive, freezes in sleep mode and won't restart...
    I've since backed everything up on an external hard drive, removed the corrupt library, even reinstalled the operating software and there is now hardly anything on the hard drive, it still runs painfully slow. If I close the lid which puts it in sleep mode, it either doesn't go into sleep mode but instead the battery just gets drained and I find it completely empty of power (it won't start again unless plugged in), or it goes into sleep mode but just freezes when I try to reopen.
    In iphoto (reinstalled) but even other applications it is painfully slow, not like a mac at all!
    I am trying to go to genius bar with it but thinking maybe someone in this forum can help...
    Many thanks
    Andre

    Have you tried SMC and PRAM resets?
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379
    Ciao.

  • Won't get past white screen on shutdown/restart

    When I choose shut down or restart on my 2012 rMBP, it logs out and moves to the white screen. From what I've seen, for an unlimited time.
    When it does this (which I think is every time), my only option is press-and-hold standby key - which I hate doing!
    This has been a problem since before Mavericks. I've tried resetting pram, repairing permissions etc etc. any other advice?
    Even just a list of things to check which I may have already would be appreciated so I can discount them.

    Been looking for a solution to this for ages and still no luck.
    Even when I boot up in Safe Mode I still get infinite white screen when I shut down!!

  • My iMac won't get passed white screen, My iMac won't get passed white screen

    Hi I was updating my iMac with mac os lion and it was installing the update when there was a power shortage and the iMac turned off. Now when I turn it on it won't get passed the white screen with the Apple logo and the turning thing, what should I do?
    The update I was doing was the Mac OS X Update Combined version 10.7.3

    I'll assume you have backups of your data. Boot from your recovery partition (command-R at startup) and reinstall the Mac OS. You don't need to erase the boot volume. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • Help! Won't load past white screen!!

    I need help please! My curve won't load past the white loading blackberry screen. I downloaded an app from the app store and it crashed my phone.  I called my carriers tech support but they are backed up and it might be a days before they can get back to me.

    Jenn, If your BlackBerry stays powered off with a white or black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • TS3824 2011 mac mini won't go past white screen with apple logo

    My Mac mini won't move past a white screen with apple logo in the center. What should I do?

    Hi ..
    If you have v10.7 Lion installed, use Lion Recovery  to repair the startup disk if necessary, or reinstall the Mac OS X.
    If you are running a prior Mac OS X, boot from your install disc, run Disk Utility. The startup disk may need repairing >  Using Disk Utility to verify or repair disks
    And try Resetting your Mac's PRAM and NVRAM

  • IMac won't boot past white screen, now has partial pixelation?

    I have just tried to restart my 2011 iMac and it has become stuck on the initial white screen (before the grey spinning gear) prior to the reboot it had being running fine for about 4 hours.
    I initially thought that it may be trying to boot from the scratched PS2 game I had in the drive (was experimenting with PCSX2 before the reboot) I have tried every button combination I can find to eject the disk or boot into a different OS, I have also tried resetting the SMC and PRAM (I didn't get the 2nd beep) but to no avail. I have also taken out the extra 4gb of memory I installed to go back to the stock 4gb and swapped the stock 4gb for the new RAM but this hasn't helped either.
    I have also noticed there is a small line of pixelation at the bottom of the screen, the high of it varies but it is usually around 4 pixels high, some of them are random colours but most of them are black, does this mean the graphics card has gone?

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Macbook won't boot past white screen

    My girlfirend's 2009 macbook aluminum unibody ((Leopard 10.5.x) is having a problem booting up. Initially I ran Onyx on it and it said it needed a disk repair. I ran a quick hardware test and it came back ok. I ran Disk Utility off of the cd and it said the repair failed. I believe the message was "invalid node, repair or verify failed." I tried it 3 times. When I went to quit disk utility and restart, it stayed on the white screen with the spinning wheel for a few minutes then the screen went blank. I tried to restart several times, always the same. I have tried resetting PRAM. I tried starting in Safe Mode but it wouldn't. I finally went to reinstall the OS but when it gets to the screen where I have to choose a drive, there is no drive in the screen to select. I don't have Disk Warrior, so can't try that. I'm thinking to remove the hard drive and get the data off of it onto my computer, then to erase her drive and start from scratch. Does anyone have another idea before I go through this?Thanks for the help.

    If your OS X installer disc is no longer usable then you can arrange to purchase a replacement by calling AppleCare Customer Service.
    Have you tried reformatting the hard drive? If may not require replacement unless the drive has truly failed.
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • IBook G4 won't boot past white screen gray apple.

    I'm having problems with my iBook G4 booting up. It won't get past the white screen with gray Apple and clock thing turning. I successfully hooked the iBook to my G4 tower via firewire and can get files off of it as well as run a series of TechTool Pro tests and repair procedures. However, I still have the same startup problem. It never gets past the white screen with gray apple. It's stuck there with the clock continually turning. Is there anything else I could try before getting everything off and wiping the drive clean and starting over? I don't know if it's a hardware or software issue at this point. Thanks for any help you could suggest.
    LW

    You should at the very least backup your Home folder from it before attempting this, but it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
    http://docs.info.apple.com/article.html?artnum=107120

  • My Macbook Pro won't get past white screen....

    My Macbook Pro is stuck on the white screen with the gray apple logo and loading gear spinning below---for hours now. Restarted multiple time without any change. Agh!

    Boot in safe mode. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable, and remove all aftermarket expansion cards. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal.
    If you can boot in safe mode, try rebooting as usual (i.e., not in safe mode.)

  • Macbook won't load past white screen, tried everything.

    Hi all,
    I've tried everything I've come across to get my Macbook running again. Tried booting into safe mode, didnt work, tried fixing using fsck in single-user mode, fsck said it worked but still wouldn't boot! Even tried verbose mode but came across disk0s2 I/O error.
    Can anyone help me out, it loads up to the white screen with the grey apple logo and the loading wheel goes round and round but goes no where.
    Working on Mac OS X but forget exactly which one.

    Hi, I had a similar problem a couple of years ago, the problem ended up being my hard drive had crashed on my macbook. You should take it to your nearest Genius Bar, they will check and see if thats the problem for free, fixing however if it is that can get expensive, of course thats according to a very poor college student, It was about 220 or so. but if you do find out its the HDD you could always just go buy one and instal it yourself, I hear it not that hard to do acutally. Good luck!

  • G5 startup won't get past White Screen, fans blow loud.

    I have a G5 single 1.8GHz (late 2005 model?) serial number YM439*QYT
    It gets stuck on the White Screen at startup. A minute later the fans start to blow really loud and it just keeps doing that and does not boot up.
    I was using a hard drive that was copied from the original drive. So I put the original drive in and it was fine for a day. Now the computer is doing the same thing at startup with the original drive, as explained above.
    I reset PRAM & NVRAM, nothing.
    I have two different video cards, that's not the issue.
    I do not have the OS Install Disc as this computer was given to me as a gift.
    Any suggestions? Thanks.
    <Edited by Host>

    OK, from http://www.chipmunk.nl/klantenservice/applemodel.html
    here is your system description:
    Serial number: YM439*QYT
    Name: PowerMac G5 (Late 2004)
    Group1: PowerMac
    Group2: G5
    Generation: 3
    ModelCode: g5june04
    CPU speed: 1.8GHz
    Memory - number of slots: 4
    When you say white screen, are you talking about the gray screen with the apple in the middle? Do you see the progress gear at all before it stalls? Have you done a safe boot to force the fsck operation? You can also do a verbose boot (hold down cmd-V combination at power up and watch for dumb terminal output with Unix messages similar to what you see in the system log). Verbose booting might give you more information about where the stall is actually occurring, if it is stalling after the point where the terminal display begins.
    Lots of voodoo in these situations, because there are lots of individual failures that can cause the problem.

  • IMac won't boot past White Screen

    Yesterday I turned on my computer and I got stuck at the white screen with the spinning dial and the apple logo. I tried to run disk utility and restore my Mac HD, it says there were problems with it, but when I tried to repair it said it cannot fix them. I then tried to re-install Snow Leopard but when I try to re-install it, no disks appear for me to install it on.
    I am not sure where to go from here.

    Sounds like a HD crash, run Apple Hardware Test in EXTENDED MODE at least 3x in succession. If errors appear as I suspect, your next stop is the Apple Store or AASP. If you have been backing up this will be a minor inconvenience, if you have not been backing up then well this will be a painful lesson on why backup is absolutely critical.

Maybe you are looking for