Lion Wiki Server - Custom sidebar will not save

I have migrated a 10.6 Server installation with a fairly large wiki over to 10.7 Server. The upgrade seemed to go smoothly, however I have found that I cannot add a new custom sidebar. It allows me to click the button to create a new one, enter the Label and the Tag, but when I click "Save", it drops me back to the General section of the wiki and the custom sidebar was not saved.
I've seen other mentions of this issue, but the solutions did not solve the issue. I have 4 total wikis and it affects all of them. I also created a new wiki and the issue persists. Erasing and starting over is not an option for me at this point.
My Lion Server is bound to an OD Master and all the permissions seem to be fine. Anyone have any suggestions?

Ok, I made it happen! Here is what I did:
DELETED com.apple.net.racoon entry from Keychain
DELETED /Library/Preferences/SystemConfiguration/com.apple.RemoteAccessServers.plist
DELETED /System/Library/LaunchDaemons/com.apple.ppp.l2tp.plist
In Server.app, turned off VPN Service with the big ON/OFF button
Rebooted computer
In Server.app, inputed the settings and switched to ON
The settings stayed on, the shared secret did not disappear and I was able to connect to the VPN from outside my network.
Sweet!

Similar Messages

Compressor custom settings will not save after reboot

I am having a problem with compressor removing my custom settings after I restart the program. I will save a custom format and it will show up in the custom folder however as soon as I close compressor and restart it shows 0 in the customer folder. I am guessing this is a bug in the new version but does anyone have any ideas? Also where do I submit a bug for compressor? Thanks

I, too, have been experiencing this for quite a while in Compressor 3. I upgraded to Compressor 4 this week, thinking that that, might solve my problem, but no. Same thing is happening in Compressor 4.
I have trashed my preferences, but still no luck.
very frustrating.

When I try to allow cookies, the security option of use custom settings will not save after I push the OK button.

Am unable to get to hotmail because cookies are blocked.

The "Use custom settings for history" setting allows to see the current history and cookie settings, but selecting that setting doesn't make any changes to history and cookie settings. 
Firefox shows the "Use custom settings for history" setting as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made. 
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History". 
"Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a check mark. 
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/kb/Preferences+are+not+saved
See:
*http://kb.mozillazine.org/Websites_report_cookies_are_disabled
*http://kb.mozillazine.org/Cookies
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

After upgrade to Lion, iPhoto will not save events nor save albums after created.

After upgrade to Lion, iPhoto will not save events nor save albums after created. Once iPhoto is shut down and re-launched, albums and events created no longer exist. How can this be fixed?
Also, when attempting to create cards, iPhoto freezes.
Message was edited by: askgabe

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Custom Authentication in 4.2 will not save Authentication Function Name

Upgrade from 4.0 to 4.2.
When creating a new Custom Authentication the Authentication Function Name will not save in the Apex Create\Edit screen. After the Apply Changes button is clicked and the authentication scheme reopened - the Authentication Function Name will be cleared. If PL/SQL code was populated in the source field - it will still be present.
Looking in the WWV_FLOW_AUTHENTICATIONS table - a new record is created but attribute_03 (this seems be where the Function Name is stored) attribute_05 and attribute_15 are null. The PL/SQL entered in Apex is there in the PLSQL_CODE field.
All preexisting Custom Authentications that existed - there fields are populated and still work correctly. However, if you edit the Authentication Scheme in Apex it nulls out those fields in the WWV_FLOW_AUTHENTICATIONS table and the scheme no longer works.
I can manually set attribute_03 to my function name, and attribute_05 to 'N' in the WWV_FLOW_AUTHENTICATIONS table and the Authentication scheme will work as long as you never try to edit it and save inside APEX( these fields are nulled out if you do this).
Also - Authorizations schemes are behaving similarly.
Checking the WWV_FLOW_SECURITY_SCHEMES table - attribute_01 is always NULL.
No error is ever given inside the Apex designer.
Any ideas how I can debug this?
10.2.0.4.0 DB.
Edited by: Bill14 on Nov 27, 2012 7:32 AM

That's what happens when you don't pay attention to what you are typing (me that is). Edited original post.
DB version is 10.2.0.4.0 (11.5.10 is our ebiz version)
The PL_SQL column in WWV_FLOW_AUTHENTICATIONS is a CLOB. Looking at a a data view in Toad it abbreviates the field to say(HUGECLOB).
This does not occur on apex.oracle.com and all of our 4.0 installs still behave as expected. The DBA said that he checked the install logs and did not see anyting out of order. I've never done an APEX install, is there a specific log file (or naming convention for a logfile) that I can tell him to look in or look for?

Adobe Reader will not save or show the Save dialog

Hello, we use adobe reader a lot where I work, mostly with filling out pre-made "Form" type PDF's and saving them in customer folders on the server, as of last friday my adobe reader will not allow me to save pdf's, I have attempted to edit and save, edit and save-as, I tried simply saving as without making any edits. I also tried to open a PDF online (specifically http://www.ncu.edu.tw/~ncu25352/Uploads/201312311030531151830864.pdf ), tested that PDF on another PC and it would allow me to save it.
I uninstalled Adobe reader 11 and reinstalled from the website ( get.adobe.com/reader ), I then uninstalled anything on the pc that relates to PDF's that I could find (which was just reader and a dictionary add-in for reader 9) and attempted to reinstall without any change in the problem.
To recap, PDF's will not save, and when I click save-as no save dialog pops up, I cannot save via the IE add-in either.
Any help would be greatly appreciated by both my boss and myself!

You mention IE, so I assume that you are on Windows.
How are you trying to save that PDF, using the IE menu bar File Save as, or the floating toolbar in the Adobe Reader plugin?

OSX 10.7.4. will not save ANY of my preferences (system or application -- Safari, Office, etc.)

I am running System OSX 10.7.4 on three different MacBooks. It will not save any of my preferences (system or application based), passwords, log-ins and keychain. Even Safari did not save imported bookmarks. I am running Office For Mac 2011 (v 14.2.1) and Outlook will work for a day or two and then I get a rebuild database error message, losing everything. Word, et all, will not save any preferences, not even recent files.
I did a full erase and clean system reinstall and a fresh install of Office. This problem occurs on all 3 of my MacBook, 2- MacBook Pro’s and a MacAir. One of the MacBook Pro’s is BRAND NEW.
Any ideas, any fixes out there?

I have what seems to be a similar issue. Are you having other issues like mine?
Macbook air      11-inch, Late 2010
                        4 GB 1067 MHz DDR3
Software           Mac OS X Lion 10.7.4 (11E53)
I have updated the latest combi update from the apple site and still have the same issue.
No matter what I try every time I restart my Mac all my preferences and applications reset. (Also preferences don't save when exiting the preference folder)
For example when in >system preferences>general -untick the 'restore windows when quitting and re-open apps' I exit preferences and then go back in to check it has automatically reticked the box.
I have deleted 2 applications several times (including removing the icon from the dock) and each time after restarting it shows a question mark on the dock where I had deleted it from.
On restart I loose downloads and history in safai.
On restart it re opens documents and applications I have quite even after unticking the restore applications on restart box (the one that comes up when shutting down or restarting)
I have been trying to solve this for a month now and it really is frustrating the **** out of me.
helpppp pleaseee...

Keynote will not save imported images

i've NEVER had a problem with Keynote in the 8 years that I have been using it. Now, it will not save my imported images. I'm getting the equivalent of the RED X in PPT. Does anyone know why this is happening? I'd reinstall, but I no longer have disks...

There are two options, try option 1 first if that does not work use option 2:
1 - a custom repair for Keynote 6.1
Try this repair for iWork applications, its sorted out many similar problems in the past
ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote by using Appcleaner from Mac Update to      do this, its freeware
2 restart the Mac;   Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
         let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and      click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
Please report back to let us know if this helped.
2 - Clean install Mavericks by      back up all your work and user files, repartition the hard drive,
then re-install Mavericks
To reinstall OS X, you must be connected to the Internet
Choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command (⌘) and R keys.
If you’re not connected to the Internet, choose a network from the Wi-Fi menu (in the top-right corner of the screen).
Select Disk Utility, then click Continue.
Select your startup disk on the left, then click the Erase tab.
Choose Mac OS Extended (Journaled) from the Format menu, enter a name, then click Erase.
After the disk is erased, choose Disk Utility > Quit Disk Utility.
Select Reinstall OS X, click Continue, then follow the onscreen instructions.

CC AI keeps crashing - will not save

All of the work I did and saved in AI for the past several days is gone. When I try to create a new file AI will not save any changes and crashes. I've been using CC for 9 months and it has worked great. Over the past two weeks I have had a couple of AI files that have lost everything and AI is having a problem saving anything. What do I do? I can't afford to keep losing work.

Hello,
I am trying:
UnInstall Adobe Illustrator CC (including Prefrences)
ReInstall Adobe Illustrator CC
Clean System Reboot (Mac OSX Lion) MacBookPro 17"
ReInstall Adobe Illustrator CCYa Know In A Bit,
Hope For THe Best......
Let you know in a bit.....
Cheers,
Kai Buskirk
Long Time User (Since 1989)
Long Time Fan!!

I-phone 4 camera roll will not save pictures sent to me via text messages, it just gives me a message stating it is updating my library, then takes me back to the camera roll where the picture is no where to be found (other than in my original text messag

I-phone 4 camera roll will not save pictures sent to me via text messages, it just gives me a message stating it is updating my library, then takes me back to the camera roll where the picture is no where to be found (other than in my original text message).

RESOLVED!!! I logged on to my Straight Talk online account, and did a Tech Chat. They immediately gave me a direct phone number and a Reference PIN number and asked me to contact their iPhone specialty support. I called (of course the gentleman's accent was very difficult for me to understand, but managed with asking continually for clarity). He walked me through several tests, setting changes and had me get on my wifi to obtain the latest APN settings. None of his efforts worked ad it was obviously NOT my Straight Talk iPhone 5, 64GB CDMA (no SIM) - it was something with their setting on their end on my account. I was placed on hold a few times and he would come back on to have me try to get on Safari and even Google... after the 3rd on-hold, he returned and asked me to try to use my data again without the wifi turned on and BINGO it worked... I still do not have my wifi turned on and I'm still receiving texts from YESTERDAY too while I was away from wifi service. IF you come across this issue - please call Straight Talk and/or log on to your Straight Talk online account and talk to an online customer service representative and get their direct line phone number for iPhone support and have your Reference PIN number available. Good Luck

Scanning photo and does scan then states ;Non writable will not save?????

scanning photo and does scan then states ;Non writable will not save?????

If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

My HP Office Jet Pro L7555 scans but will not save it to a flash drive. Is there a fix for that?

I have a some issues:
1. My HP Office Jet Pro L7555 scans but will not save to a flash drive. (I get error messaqges when I try to download it to my computer) What is the fix for that?
2. Sometimes when I turn it on it will indicate that one of the ink cartridges is empty and upon restartin it all the cartidges show full. What is the fix for that?
3. We have a small network. I can not find the disks that came with the printer. How do I set it up so it saves to one of the computers connected to the network?
Thanks,
PF1

Hi,
Heres a patch for missing scanned images
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-81532-2&cc=us&dlc=en&lc=en&...
Heres the link for the full feature software download
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79356-3&cc=us&dlc=en&lc=en&...
and use this document for ink related issues
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01628836&tmp_task=solveCategory&cc=us&dlc=en&ju...
Hope this helps..
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

In iOS 4, you could make separate photo slide shows with separate songs. In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show. Is there any way to fix this? This is something I

In iOS 4, you could make separate photo slide shows with separate songs.
In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.
Is there any way to fix this? This is something I use every day.
I am on an iPad 2, 32gb, wifi...
Thank you

My Photos app works the same on iOS 5 as it did on iOS 4 i.e. I can have a different track for each album. When I select a track for a photo album I then start the slideshow so that it shows the first couple of photos with the track playing - I'm not sure it's necessary to start the slideshow but I always do and it remembers that track for that album.

Hello, I have a series of language cd's that I am trying to put onto my iTunes but when I download them, they will not save separately instead they are saving as the first disk so i am ending up with 3 disks on 1. Please help

Hello, I am trying to copy a series of language cd's onto iTunes but each cd will not save separately, instead it is saving all as one disk. So I am ending up with 3 disks on 1 with 3 different track1, 2 etc. Please help as I am sure there is an easy solution to this that I have no clue about. Thanks

After you insert the CD but before you import it into iTunes, select all tracks and set the disc number to 1, 2, 3 ... as appropriate.

UPGRADED 10.4.11 ON MACBOOK PRO TO 10.5, NOW UPDATES TO 10.5.8 WILL NOT SAVE, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS.

UPGRADED 10.4.11 ON MACBOOK PRO INTEL TO 10.5.1 (FAMILY PACK VERSION), UPDATES TO 10.5.8 WILL NOT SAVE DUE TO, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS? CAN I UPGRADE TO 10.6.1 WITHOUT SAME ISSUE.

Well, not sure if having the disk in a firewire case or over a network would have made a difference.
The solution of making a disk image as in article http://support.apple.com/kb/TS2664 was what worked for me.
After, mounting the disk image the Migration Assistant completed without errors. So far everything seems to be working like it did on 10.4.11.

Lion Wiki Server - Custom sidebar will not save

Similar Messages

Maybe you are looking for