Lion will not mount shares from Debian Linux 5.0 server
HI after Lion update I cant mount shares from our server, it replys back with this:
"The version of the server you tryed to connect to are not supported"
I can not find info about server versions supported anywhere
Anyone know what can be done to fix this problem with shares?.
I figured out the problem.
This is going to sound a little crazy, but I've spent a lot of time on this one.
There's some kind of incompatibility with Lion and Seagate ST31000340AS drives. I was trying to install Lion on these drives and it would consistently fail. I've also tried to use these drives in a RAID volume. No go. I tried three different drives of this model. All of them failed.
I tried to install Lion on a Seagate ST31000528AS and it worked first time and sings beautifully.
Similar Messages
-
IMac 27 inch i7 OSX Lion will not boot up from Hard Disc
iMac 27 inch i7 OSX Lion will not boot up from Hard Disc on cold start, and cannot find wifi hardware in the machine. Restart and everything is fine. I have two machine and they behave the same. Software or hardware problem?
First of all, try a hard restart; making sure no disks are in the slot, unplug everything from your computer (keyboards, mice, etc.) and then unplug the computer itself. Leave it unplugged for a minute or two, then plug it back in and boot it up.
If that fails, reboot it while holding down the option-key on your keyboard. The screen should show a choice of which disk drive to boot from. Choose your usual drive.
If that fails, reboot it while holding down the shift-key on your keyboard. It should take a while for it to boot up, as it is destroying all connections to sources that may contain a virus.
If that fails, reboot it while holding down keys "option-command-P-R" until you hear the startup tone a second time.
If that fails, reboot it while holding down the C-key. Make sure you have inserted the installation disk before doing this step.
If that fails, reboot it while holding down the command-key and the R-key.
If that fails, please reply to this and let me know. -
After upgrading to Mountain Lion, my LaCie USB 3 drive will not mount
I just upgraded my OS to 10.8 and now my LaCie P'9230 USB 3.0 external drive will not mount. I have re-installed the USB driver and re-booted the computer and drive several times to no avail; any ideas/help?
mrfredmor_65 wrote:
I just upgraded my OS to 10.8 and now my LaCie P'9230 USB 3.0 external drive will not mount. I have re-installed the USB driver and re-booted the computer and drive several times to no avail; any ideas/help?
It's my understanding that LaCie hasn't released a Mountain Lion driver for their PCIe card yet. Sonnet uses a modified version of the LaCie driver and theirs is dead in the water too for that reason-they also warn that their driver won't work with 10.7.5 when it's released.
Indeed, yesterday I pulled the Sonnet USB 3.0 card from my Mac Pro and replaced it with a CalDigit card from OWC; CalDigit has separate drivers for 10.6, 10.7 and 10.8 and I can say that the card works with all three, the first time in 1.5 years that I've had a reliable USB 3.0 connection. -
since update to lion osx my imac will not mount windows created video dvds my other imac running snow leopard will
You could've backed up your iPad prior to the "forced" upgrade which, by the way, you could have cancelled. iTunes doesn't upgrade your iPad, automatically, on its own. You had to click the Upgrade button to initiate the upgrade. You didn't have to do anything with that button. You can just leave it be.
iOS 8 is garbage on iPad 2 and 3 and even though iTunes keeps giving me the Update button option, I continually choose to ignore it.
Ignoring the Upgrade/Update button doesn't affect the normal iTunes/iDevice syncing/backing up operations.
You could've just left that button alone.
When was the last time you backed up your iPad?
While there is no way way to revert to a previous iOS version once you upgrade your iDevices iOS, iTunes saves multiple backups of your iDevice and if you backed up your iPad previously to this latest activity, you should be able to restore your iPad from an older backup that should appear by date when you plug your iDevice into your Mac, was for iTunes to launch and sync your iPad, then cancel the backup in progress and use the Restore function in iTunes to restore your iDevice from another previous backup version date.
If your current version of iTunes doesn't recognize your iPad2 under iOS 8, you need to check the iTunes update feature, in iTunes or in OS X Software Update feature in OS X Preferences panel to see if there is a iTunes update available for OS X 10.6.8 Snow Leopard. -
My macbook pro with OS x Lion will not drag and drop files from finder or iTunes
My macbook pro with OS x Lion will not drag and drop files from finder or iTunes. Can anyone help?
Hi, I just have same problem.. I can't drag and drop file /folder.. please help.. I can drag the file/folder and move it , but I can't drop it after move it please help...!!!
It is happen just after I re-start my computer.. I tried to repair and anything but just don't work. Actually the old style one finger double tab and lock is much better rather the 3 fingers.
Please help to fix the drag and drop for file/folder/itunes. -
Mountain lion will not download thru the apps store. It has been purchased and redeemed. I have set my energy settings appropriately so computer will not turn off during download as Verizon offers a connection that is very slow. I have set the display to go to sleep (which I have set so I have to sign in again). When I sign in again, Mountain Lion OSX has disappeared from the launchpad. I have tried this several times. I do have Norton Internet Security on my Mac Air. I turned off the idle time scan on the Norton and tried again. Same results. Anyone?
Ask anyone around here, and they will tell you quite differently. AV software will slow down your computer, can be incompatible with software you use, can cause kernel panics and other problems. It is unnecessay since OS X has it's own protection built-in. AV software can no more tell the difference between safe and unsafe sites on your browser than could an elephant.
But, hey, who am I to argue with your tech person? Please, don't let me sway your opinion. How about a visit to:
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.) -
External USB drives will not mount under Mountain Lion
Since upgrading to Mountain Lion, two external USB2 drives that I have will not mount and cannot be viewed in the Finder. The same occurs on a 2012 MacBook Air, a 2009 iMac 27 and a 2010 MacMini, all running OS X Mountain Lion version 10.8.2.
Both drives are Samsung Story external USB drives (one is 1.5 GB and the other is 2 GB) and both have been formatted using Mac Disk Utility with a single Mac OS Extended (Journaled) partition, one using Snow Leopard and the other with Lion.
Both still mount correctly on a friends MacBook Pro that is still running Snow Leopard, and I had no problem with the same drives under Lion. Interestingly both can also be connected to Time Capsule USB port and show up correctly.
Both drives mount correctly under Windows 7 on BootCamp partitions that I have on both the 2012 MacBook Air, a 2009 iMac 27. These BootCamp partitions have Paragon HFS+ installed so I can read Mac formated drives.
Both drives show up in Disk Utility, but when attempt to mount the drives I get the message "The disk could not be mounted. Try running First Aid on the disk and retry mounting." I can run Repair in First Aid on the disk and get the message that the volume appears OK, but again have the same problem when I attempt to mount the disk.
I have also tried using Disk Utility 3,2, but still cannot mount the drives, though the program indicates there is no problem with the drives.
I have other portable USB including a Samsung portable USB2 drive, and two external USB3 drives, and I don't have problems with them.
There is clearly a problem with Mountain Lion with accessing (mounting) these Samsung Story USB drives, and the problem appears to be with Mountain Lion itself as the problem did not occur on the same Macs with Lion and does not occur with Bootcamp partitions on the machines.
I have a lot of time searching forums, but I have not found anyone with an identical problem.
I sure hope someone can help or that Apple come up with a fix for this issue which has only developed since the update to Mountain Lion.bj10au wrote:
Since upgrading to Mountain Lion, two external USB2 drives that I have will not mount and cannot be viewed in the Finder. The same occurs on a 2012 MacBook Air, a 2009 iMac 27 and a 2010 MacMini, all running OS X Mountain Lion version 10.8.2.
Both drives are Samsung Story external USB drives (one is 1.5 GB and the other is 2 GB) and both have been formatted using Mac Disk Utility with a single Mac OS Extended (Journaled) partition, one using Snow Leopard and the other with Lion.
Both still mount correctly on a friends MacBook Pro that is still running Snow Leopard, and I had no problem with the same drives under Lion. Interestingly both can also be connected to Time Capsule USB port and show up correctly.
Both drives mount correctly under Windows 7 on BootCamp partitions that I have on both the 2012 MacBook Air, a 2009 iMac 27. These BootCamp partitions have Paragon HFS+ installed so I can read Mac formated drives.
Both drives show up in Disk Utility, but when attempt to mount the drives I get the message "The disk could not be mounted. Try running First Aid on the disk and retry mounting." I can run Repair in First Aid on the disk and get the message that the volume appears OK, but again have the same problem when I attempt to mount the disk.
I have also tried using Disk Utility 3,2, but still cannot mount the drives, though the program indicates there is no problem with the drives.
I have other portable USB including a Samsung portable USB2 drive, and two external USB3 drives, and I don't have problems with them.
There is clearly a problem with Mountain Lion with accessing (mounting) these Samsung Story USB drives, and the problem appears to be with Mountain Lion itself as the problem did not occur on the same Macs with Lion and does not occur with Bootcamp partitions on the machines.
I have a lot of time searching forums, but I have not found anyone with an identical problem.
I sure hope someone can help or that Apple come up with a fix for this issue which has only developed since the update to Mountain Lion.
You can start here
http://support.seagate.com/kbimg/flash/213059/213059_EN.HTML
Pete -
How do I import addresses from Address Book Ver 4.1.2 to the Lion Address Book version 7.0? Mountain Lion will not allow me to open Address book Version 4.1.2
Do you have any addresses in the Lion version?
If not, copy the AddressBook folder from your username/Library/Application Support/ folder on the old mac (or backup).
Copy it to the same location on your new Mac, replacing the one that is there. Start Address Book in Mountain Lion and it should convert the files to the correct format.
If you do have addresses, it is a little more complicated.
First, create a Contacts Archive (from File>Export menu). This will be your backup.
Next, export the current contacts as vCards.
Then, follow the steps above.
Then, import all the cards you exported. If you select all and double-click, it will ask if you want to add them. You'll then have to add them to whatever groups you had set up. -
How do I import addresses from Address Book Ver 4.1.2 to the Lion Address Book version 6.1? Lion will not allow me to open Address book Version 4.1.2 to get to the addresses to copy
Do you have any addresses in the Lion version?
If not, copy the AddressBook folder from your username/Library/Application Support/ folder on the old mac (or backup).
Copy it to the same location on your new Mac, replacing the one that is there. Start Address Book in Mountain Lion and it should convert the files to the correct format.
If you do have addresses, it is a little more complicated.
First, create a Contacts Archive (from File>Export menu). This will be your backup.
Next, export the current contacts as vCards.
Then, follow the steps above.
Then, import all the cards you exported. If you select all and double-click, it will ask if you want to add them. You'll then have to add them to whatever groups you had set up. -
Drobo FS shares will not mount
Hi, I am having a very frustrating problem with Drobo. I upgraded to Drobo FS becaise it is time Machine compatible but I cannot get the Shares to mount. Technocal support will not help me and advocate that it is an "Apple Problem". I am trying to run the Drobo FS on my Mac Pro OSX 10.7.3 and the shares will not mount I can however get the shares to mount if I connect it to my Mac Book Pro OSX 10.7.3.
I have no idea where to start...any ideas? All Drobo will state is that they are not resposible for Apple's SMB
regards,
George.Imagine you want to enter your parents' house. You have a key for your house but it won't work on their locks. They won't give you their key and now you complain you can't get in with your own key. Same thing, server password and client password are two different keys for two different locks.
-
External disks will not mount on new OS install
Hi,
I just had to reformat and reinstall all the OS and applications on a imac g5 for a friend of mine. I have updated all the os to 10.5.8 and have installed user software iWork, iLife, Microsoft office and Roxio's Toast 10 and a family history software called Reunion. That is all that has been done to this new install.
I went to transfer her personal files back and I can't get any external disks to mount. They will all show in disk utility but will not mount the desktop. I have tried 2 different drives formatted in Mac OS Exteded Journalled as well as MS-Dos Fat32. I have also tried flash drives formatted in each of these formats. All of these drives are readable on several other computers I have here, including a 2008 Macbook Pro running Lion, 2010 iMac running Snow Leopard as so on.
When inserted in the iMac G5 I can see all the drives in disk utiltiy and was able to even erase and reformat a drive to differnt format ( mac extended to Fat32) without issues to mount on the other computers.
Cd's mount just fine.
Anyone have any clues as to what's going on? Any thoughts are most welcome.
Thanks
paxBDAqua wrote:
What exactly shows in System Profiler>Hardware>USB for those drives?
Boot from the Install Disc & see if they show up, not grayed out in Disk Utility.
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
We were thinking along the same lines. While at home I dug up a firewire enclosure and put a bootable GUID formatted drive in it (that I had in one of the usb enclosures) and started her computer holding down the option key and then chose to boot from the external firewire. All usb drives are now mounting upon connection. I asume that her drive has bad sectors on it (even though the SMART status says it's OK) and is not loading all the drivers properly for USB to mount. I was suspicious from the beginning that the OS was corrupt when she first had me look at it. It was at that point that I booted it in target mode, connected to my Macbook Pro, and then CCC'd to a usb drive that I had. I then had a couple of difficulties installing the new OS. Should have known......
I am now going to put a new drive in it for her and she'll be up and running.
Thanks so much for your help and thoughts that got me thinking as well.
pax -
Lacie HD will not mount to Macbook Air...
Ok, I have a Lacie Rugged 1TB HD. My 24'' iMac (running Snow Leopard) reads it fine. But my new Macbook Air (running Mountain Lion) does not recognize it. The HD does not show up in Disk Utility on the Air either. I have taken all the date from the HD and backed it up on a separate external HD. After that, I erased the Lacie and reformated it to the "Mac OS Extended" and the Macbook Air still will not mount to the Lacie external.
Is there anything I can do to get the Macbook Air to mount to the Lacie HD? Any advice would be greatly appreciated. Thanks in advance.Have you used other external drives on the air before? Are you using thunderbolt or USB? If you bought your air from apple you should take it in to a store and have them check the ports. You could run an extended hardware test, although I'm not sure if that would check the ports working ability.
-
My Ipod 4th Gen will not mount into Itunes
Please anyone with technical knowledge HELP ME.
The basic problem is that my 4th Generation Ipod will not mount into Itunes.
Let me tell you what I have done so far this includes all the R's, I have also followed the advice of reinstalling itunes and Quicktime I have also tried backwards installing to version 6 (at present I have upgraded to version 7.0.2). The ipod is visible in Windows and I still am able to use it as disk as I have programs I am using off it.
I have tried a fifth gen and also an Ipod mini and both mount onto my Itunes.
I have tried to reinstall the Ipod software, however the previous ipod updates do not work and as the Ipod cannot be mounted I cannot use Itunes to update it as it is not visible.
I have also run the Ipod Diagnostic in Itunes and everything seems fine (I have included the report if anyone can please understand it)and at the very bottom it states that the Ipod is truly Mounted. WELL ITS NOT
I really am getting desperate now as this is the same on both my Desktop and Laptop and I am getting very close to throwing the whole thing out along with all the rest of my computer equipment.
Thanks a lot
DIAGNOSTIC REPORT
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
FUJITSU SIEMENS AMILO PRO V2030
iTunes 7.0.2.16
iPodService 7.0.2.16 is currently running.
iTunesHelper 7.0.2.16 is currently running.
Current user is an administrator.
Connected Storage Devices:
IDE\DiskFUJITSUMHV2040BH______________________00000025, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
Universal Serial Bus Controllers:
VIA Rev 5 or later USB Universal Host Controller, PCI bus 0, device 16, function 0. Device is working properly.
VIA USB Enhanced Host Controller, PCI bus 0, device 16, function 4. Device is working properly.
IEEE 1394 Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller, PCI bus 0, device 12, function 2. Device is working properly.
Connected Device Information
PAUL'S IPOD (E:\), iPod with Click Wheel running firmware version 3.1.1
Serial Number: JQ447113PQ7
Bus Speed: 61440
The last connected iPod serial number: JQ524ER2S41.
The iPod Service Logging Information:
[SERVICE: 0xDA8,09:16:59 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Sat Nov 18 09:16:59 2006)
[SERVICE: 0xDA8,09:16:59 INFO] ##### iPodService starting as a service, version: 7.0.2.16
[SERVICE: 0xDB8,09:17:00 INFO] Got signaled to go ahead... Starting device manager!
[SERVICE: 0x4F0,09:17:00 INFO] Listener Window created
[SERVICE: 0xDB8,09:17:02 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xDB8,09:17:02 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xDB8,09:17:02 INFO] device is an iPod
[SERVICE: 0xDB8,09:17:02 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xDB8,09:17:08 INFO] [-1] set waiting to mount = 1
[SERVICE: 0xDB8,09:17:08 INFO] [1] Assigning session 0
[SERVICE: 0xDB8,09:17:08 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0xDB8,09:17:08 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0xDB8,09:17:08 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0xDB8,09:17:08 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0xDB8,09:17:08 INFO] [1] input #0 from src #0
[SERVICE: 0xD24,09:17:08 INFO] [1] input #0
[SERVICE: 0xD24,09:17:08 INFO] [MACHINE 1 INPUT #0] - (HDW) Interface Arrival
[SERVICE: 0xD24,09:17:08 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0xD24,09:17:08 INFO] [1] progress is now 2
[SERVICE: 0xD24,09:17:08 INFO] [1] progress is now 2
[SERVICE: 0xD24,09:17:08 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0xD24,09:17:08 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0xD24,09:17:08 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0xD24,09:17:08 INFO] VendorId: Apple
[SERVICE: 0xD24,09:17:08 INFO] ProductId: iPod
[SERVICE: 0xD24,09:17:08 INFO] revision: 1.62
[SERVICE: 0xD24,09:17:08 INFO] vendor bytes:
[SERVICE: 0xD24,09:17:08 INFO] 02 01 00 00 00 00 00 00 00 05 00 13 12 00 00 00 00 00 00 00
[SERVICE: 0xD24,09:17:08 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0xD24,09:17:08 INFO] [1] Power State: Not Powered
[SERVICE: 0xD24,09:17:08 INFO] [1] Checkpoint attempt #0
[SERVICE: 0xD24,09:17:08 ERROR] Did not find first letter of stage
[SERVICE: 0xD24,09:17:08 INFO] [1] serial number 000A270002BF5F21
[SERVICE: 0xD24,09:17:08 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x4F0,09:17:11 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:17:11 INFO] [VolumeArrive] mask = 0x1C
[SERVICE: 0x4F0,09:17:11 INFO] looking up device # for \\.\E:
[SERVICE: 0x4F0,09:17:11 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x4F0,09:17:11 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0x4F0,09:17:11 INFO] [1] set waiting to mount = 0
[SERVICE: 0x4F0,09:17:11 INFO] [1] input #1 from src #0
[SERVICE: 0x52C,09:17:11 INFO] [1] input #1
[SERVICE: 0x4F0,09:17:11 INFO] looking up device # for \\.\D:
[SERVICE: 0x4F0,09:17:11 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x4F0,09:17:11 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x4F0,09:17:11 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:17:11 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xDB8,09:17:11 INFO] [VolumeArrive] mask = 0x1C
[SERVICE: 0xDB8,09:17:11 INFO] looking up device # for \\.\E:
[SERVICE: 0xDB8,09:17:11 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xDB8,09:17:11 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0xDB8,09:17:11 INFO] [1] set waiting to mount = 0
[SERVICE: 0xDB8,09:17:11 INFO] [1] input #2 from src #0
[SERVICE: 0x4EC,09:17:11 INFO] [1] input #2
[SERVICE: 0xDB8,09:17:11 INFO] looking up device # for \\.\D:
[SERVICE: 0xDB8,09:17:11 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xDB8,09:17:11 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x52C,09:17:11 INFO] [MACHINE 1 INPUT #1] - (HDW) Volume Mount
[SERVICE: 0x52C,09:17:11 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0xDB8,09:17:11 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xDB8,09:17:11 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x52C,09:17:11 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x52C,09:17:11 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x52C,09:17:11 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:17:11 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:17:14 ERROR] Did not find first letter of stage
[SERVICE: 0x52C,09:17:15 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x52C,09:17:16 INFO] [1] ===== iPod Touch Wheel =====
[SERVICE: 0x52C,09:17:16 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:17:16 INFO] 9:17:16, year 2006, day of yr. 321, GMT offset 0 isDST 0
[SERVICE: 0x52C,09:17:16 INFO] [1] progress is now 0
[SERVICE: 0x52C,09:17:18 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x52C,09:17:18 INFO] [1] Auto-launch iTunes DISABLED
[SERVICE: 0x4EC,09:17:18 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
[SERVICE: 0x4EC,09:17:18 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:21 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:21 INFO] [1] input #3 from src #0
[SERVICE: 0xD24,09:18:21 INFO] [1] input #3
[SERVICE: 0x4F0,09:18:21 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:21 INFO] [1] input #4 from src #0
[SERVICE: 0x4EC,09:18:21 INFO] [1] input #4
[SERVICE: 0x4F0,09:18:21 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:21 INFO] [1] input #5 from src #0
[SERVICE: 0x52C,09:18:21 INFO] [1] input #5
[SERVICE: 0xD24,09:18:22 INFO] [MACHINE 1 INPUT #3] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:23 INFO] Connection Detection Status - 0x1806002, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:18:23 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:23 INFO] [1] progress is now 1
[SERVICE: 0x4EC,09:18:23 INFO] [MACHINE 1 INPUT #4] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:24 INFO] [MACHINE 1 TRANSITION] - {Mounted} ==> {Unknown}
[SERVICE: 0x4EC,09:18:24 INFO] Connection Detection Status - 0x1806002, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4EC,09:18:24 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x52C,09:18:24 INFO] [MACHINE 1 INPUT #5] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:24 INFO] [MACHINE 1 ACTIONS] - {Unknown}
[SERVICE: 0x52C,09:18:24 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x52C,09:18:24 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:24 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:18:24 INFO] [1] *** DISCONNECTED - Sending event out, device session 0.
[SERVICE: 0xD24,09:18:24 INFO] [1] progress is now 0
[SERVICE: 0xD24,09:18:24 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x4F0,09:18:38 INFO] [VolumeRemoved] existing mask 0x10, arrive mask 0x10
[SERVICE: 0x4F0,09:18:38 INFO] [1] value = 1
[SERVICE: 0x4F0,09:18:38 INFO] [1] input #6 from src #0
[SERVICE: 0x4EC,09:18:38 INFO] [1] input #6
[SERVICE: 0x4EC,09:18:38 INFO] [MACHINE 1 INPUT #6] - (HDW) Volume Unmount
[SERVICE: 0x4EC,09:18:38 INFO] [1] progress is now 3
[SERVICE: 0x4EC,09:18:38 INFO] [1] Setting progress to 3
[SERVICE: 0x4EC,09:18:38 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:38 INFO] [InterfaceRemoved]
[SERVICE: 0x4F0,09:18:38 INFO] [1] value = 0
[SERVICE: 0x4F0,09:18:38 INFO] removed device number 1 from m_objDeviceNumberMap
[SERVICE: 0x4F0,09:18:38 INFO] [1] input #7 from src #0
[SERVICE: 0x52C,09:18:38 INFO] [1] input #7
[SERVICE: 0x4F0,09:18:38 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:38 INFO] [1] Progress state is 3, Waiting to disconnect = 0
[SERVICE: 0x4F0,09:18:38 ERROR] device number 0 exists, but isn't in m_objDeviceNumberMap!
[SERVICE: 0x4F0,09:18:38 INFO] removed device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" from m_vctDeviceInterfaces
[SERVICE: 0x4F0,09:18:38 INFO] [1] input #8 from src #0
[SERVICE: 0xD24,09:18:38 INFO] [1] input #8
[SERVICE: 0x52C,09:18:38 INFO] [MACHINE 1 INPUT #7] - (HDW) Interface Removal
[SERVICE: 0x52C,09:18:38 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:38 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:38 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:18:38 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:39 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:39 INFO] [1] input #9 from src #0
[SERVICE: 0x4EC,09:18:39 INFO] [1] input #9
[SERVICE: 0x4EC,09:18:39 INFO] [MACHINE 1 INPUT #9] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:18:39 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4EC,09:18:39 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:48 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:48 INFO] [1] input #10 from src #0
[SERVICE: 0x52C,09:18:48 INFO] [1] input #10
[SERVICE: 0x4F0,09:18:48 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:48 INFO] [1] input #11 from src #0
[SERVICE: 0xD24,09:18:48 INFO] [1] input #11
[SERVICE: 0x52C,09:18:49 INFO] [MACHINE 1 INPUT #10] - (HDW) CheckDevNode
[SERVICE: 0x52C,09:18:49 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:49 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:49 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:34:58 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:34:58 INFO] [1] input #12 from src #0
[SERVICE: 0x4EC,09:34:59 INFO] [1] input #12
[SERVICE: 0x4EC,09:34:59 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:35:00 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:39:01 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:39:01 INFO] [1] input #13 from src #0
[SERVICE: 0x52C,09:39:01 INFO] [1] input #13
[SERVICE: 0x52C,09:39:02 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0x52C,09:39:02 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:39:02 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:39:02 INFO] [1] input #14 from src #0
[SERVICE: 0xD24,09:39:02 INFO] [1] input #14
[SERVICE: 0xD24,09:39:02 INFO] [MACHINE 1 INPUT #14] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:39:02 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:42:41 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:41 INFO] [1] input #15 from src #0
[SERVICE: 0x4F0,09:42:41 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:41 INFO] [1] input #16 from src #0
[SERVICE: 0x4F0,09:42:41 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:41 INFO] [1] input #17 from src #0
[SERVICE: 0x52C,09:42:41 INFO] [1] input #15
[SERVICE: 0x4EC,09:42:41 INFO] [1] input #16
[SERVICE: 0xD24,09:42:41 INFO] [1] input #17
[SERVICE: 0x52C,09:42:41 INFO] [MACHINE 1 INPUT #15] - (HDW) CheckDevNode
[SERVICE: 0x52C,09:42:49 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4EC,09:42:49 INFO] [MACHINE 1 INPUT #16] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:42:49 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:42:49 INFO] [MACHINE 1 INPUT #17] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:42:49 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4F0,09:42:51 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:42:51 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x4F0,09:42:51 INFO] [1] set waiting to mount = 1
[SERVICE: 0x4F0,09:42:51 INFO] [1] Attempt to reassign from session 0 to session 0, DENIED!
[SERVICE: 0x4F0,09:42:51 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x4F0,09:42:51 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x4F0,09:42:51 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0x4F0,09:42:51 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0x4F0,09:42:51 INFO] [1] input #18 from src #0
[SERVICE: 0x52C,09:42:51 INFO] [1] input #18
[SERVICE: 0x4F0,09:42:51 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:51 INFO] [1] input #19 from src #0
[SERVICE: 0x4EC,09:42:51 INFO] [1] input #19
[SERVICE: 0x4F0,09:42:51 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:51 INFO] [1] input #20 from src #0
[SERVICE: 0xD24,09:42:51 INFO] [1] input #20
[SERVICE: 0x52C,09:42:51 INFO] [MACHINE 1 INPUT #18] - (HDW) Interface Arrival
[SERVICE: 0x52C,09:42:51 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0x52C,09:42:51 INFO] [1] progress is now 2
[SERVICE: 0x52C,09:42:51 INFO] [1] progress is now 2
[SERVICE: 0x52C,09:42:51 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0x52C,09:42:51 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0x52C,09:42:51 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0x52C,09:42:51 INFO] VendorId: Apple
[SERVICE: 0x52C,09:42:51 INFO] ProductId: iPod
[SERVICE: 0x52C,09:42:51 INFO] revision: 1.62
[SERVICE: 0x52C,09:42:51 INFO] vendor bytes:
[SERVICE: 0x52C,09:42:51 INFO] 02 01 00 00 00 00 00 00 00 05 00 13 12 00 00 00 00 00 00 00
[SERVICE: 0x52C,09:42:51 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0x52C,09:42:51 INFO] [1] Power State: Not Powered
[SERVICE: 0x52C,09:42:51 INFO] [1] Checkpoint attempt #0
[SERVICE: 0x52C,09:42:51 ERROR] Did not find first letter of stage
[SERVICE: 0x52C,09:42:51 INFO] [1] serial number 000A270002BF5F21
[SERVICE: 0x52C,09:42:51 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x4EC,09:42:51 INFO] [MACHINE 1 INPUT #19] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:42:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:42:51 INFO] [MACHINE 1 INPUT #20] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:42:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4F0,09:42:53 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:42:53 INFO] [VolumeArrive] mask = 0x1C
[SERVICE: 0x4F0,09:42:53 INFO] looking up device # for \\.\E:
[SERVICE: 0x4F0,09:42:53 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x4F0,09:42:53 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0x4F0,09:42:53 INFO] [1] set waiting to mount = 0
[SERVICE: 0x4F0,09:42:53 INFO] [1] input #21 from src #0
[SERVICE: 0x52C,09:42:53 INFO] [1] input #21
[SERVICE: 0x4F0,09:42:53 INFO] looking up device # for \\.\D:
[SERVICE: 0x4F0,09:42:53 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x4F0,09:42:53 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x4F0,09:42:53 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:42:53 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x52C,09:42:54 INFO] [MACHINE 1 INPUT #21] - (HDW) Volume Mount
[SERVICE: 0x52C,09:42:54 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x52C,09:42:54 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x52C,09:42:54 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x52C,09:42:54 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:42:54 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:42:54 ERROR] Did not find first letter of stage
[SERVICE: 0x52C,09:43:02 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x52C,09:43:03 INFO] [1] ===== iPod Touch Wheel =====
[SERVICE: 0x52C,09:43:03 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:43:03 INFO] 9:43:3, year 2006, day of yr. 321, GMT offset 0 isDST 0
[SERVICE: 0x52C,09:43:03 INFO] [1] progress is now 0
[SERVICE: 0x52C,09:43:04 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x52C,09:43:04 INFO] [1] Auto-launch iTunes DISABLED
[SERVICE: 0x4F0,09:43:11 INFO] [VolumeArrive] mask = 0x10
[SERVICE: 0x4F0,09:43:11 INFO] looking up device # for \\.\E:
[SERVICE: 0x4F0,09:43:11 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x4F0,09:43:11 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0x4F0,09:43:11 INFO] [1] set waiting to mount = 0
[SERVICE: 0x4F0,09:43:11 INFO] [1] input #22 from src #0
[SERVICE: 0x4EC,09:43:11 INFO] [1] input #22
[SERVICE: 0x4EC,09:43:11 INFO] [MACHINE 1 INPUT #22] - (HDW) Volume Mount
[SERVICE: 0x4EC,09:43:11 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:43:11 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:43:11 INFO] [1] input #23 from src #0
[SERVICE: 0xD24,09:43:11 INFO] [1] input #23
[SERVICE: 0xD24,09:43:12 INFO] [MACHINE 1 INPUT #23] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:43:12 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xF90,09:43:16 INFO] <0x4> Got Serial #
[SERVICE: 0x200,09:43:16 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0x200,09:43:16 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x200,09:43:16 INFO] Mounted
[SERVICE: 0x200,09:43:16 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x200,09:43:16 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:16 INFO] Mounted
[SERVICE: 0xF90,09:43:16 INFO] [1] already mounted!
[SERVICE: 0xF90,09:43:16 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x200,09:43:33 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xD10,09:43:33 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD10,09:43:33 INFO] Mounted
[SERVICE: 0xD10,09:43:33 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD10,09:43:33 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:33 INFO] <0x4> COM request for device 1 drive letter - E
[SERVICE: 0xD10,09:43:34 INFO] Mounted
[SERVICE: 0xD10,09:43:34 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD10,09:43:34 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:54 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xF90,09:43:54 INFO] Mounted
[SERVICE: 0xF90,09:43:54 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xF90,09:43:54 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x200,09:43:54 INFO] Mounted
[SERVICE: 0x200,09:43:54 INFO] [1] already mounted!
[SERVICE: 0x200,09:43:54 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xD10,09:43:54 INFO] Mounted
[SERVICE: 0xD10,09:43:54 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD10,09:43:54 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:54 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xF90,09:43:54 INFO] Mounted
[SERVICE: 0xF90,09:43:54 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xF90,09:43:54 INFO] Device 1 not in intermediate state. It appears to be truly mounted.If anyone is interested I managed to solve this problem by reformatting the ipod as a mac ipod, with the help of friends system. This does get rid of the music but as I had it backed up wasn't a problem. I then plugged the mac Ipod back into a windows pc and reformatted it as a windows ipod which updated the firmware correctly and have'nt had a problem since.
-
How can I update my iPod classic that will not mount on iMac computer?
I can't update my iPod classic from my iTunes on my iMac computer with OSX 10.9. It will not mount or be recognized by iTunes version 12.1.
I plug it into the USB port and it charges, gives the "Do not disconnect" symbol but the computer does not recognize or mount the iPod at all. I haven't been able to update the music for years. I have four other devices associated with my Apple ID for automatic downloads. Is it too antiquated to upload any of my music from my computer to it anymore?Ahh! The plot thickens!
I went thru the console and read the error logs. It appears that the .ipsw file does load.....I think. It's been years since I spoke computer....
Here is what I got after double clicking the .ipsw file and iTunes opened:
2014-12-28 11:05:02.430 AM syspolicyd[450]: assessment granted for iPod_13.1.3.ipsw by _XProtect com.apple.message.domain: com.apple.security.assessment.outcome2 com.apple.message.signature2: bundle:UNBUNDLED com.apple.message.signature3: iPod_13.1.3.ipsw com.apple.message.signature5: UNKNOWN com.apple.message.signature4: 3 com.apple.message.signature: granted:_XProtect SenderMachUUID: C6FC6A41-170C-3D84-BAAE-6983F164E903 -
My external backup drive will not mount. I have tried to mount it in Disk Utility via the app and the command prompt but the attempt times out. Any suggestions?
I backed up my HD the day before dropping off my Mac for repair, and then tried again just before going to my appointment. During this last and final backup my Macbook Air crashed. I have since discovered that the drive will no longer mount, likely due to the crash that occured during the last attempted backup. I am unsure if the drive can be repaired.
My logic board was short circuiting some where that controls the headphone jack. Initially this prevented me from using the jack but eventually caused my mac to crash several times before I brought it in for repair. I believe that it is the this crashing that is responsible for my back up not being accessible but that my data may still be intact.
Thanks for any help you may have!If possible, attach it to another Mac and see if it is recognized in Disk Utility. If so, run Disk Utility>First Aid. If not, the HDD may be damaged.
Ciao.
Maybe you are looking for
-
Problems setting up iCloud & Outlook 2010
Hi, I have just installed Outlook 2010 & am trying to set it up to work with iCloud. When I tick the boxes for Calendar & Contacts on the iCloud control panel & click apply it starts the set up process, but part way through I get an error message say
-
I have a G5 mac using ver 10.4.11 and a newer mac using ver 10.8.4 these are networked. using the new mac i looked up my my photo on the old mac. It then said you need to upgrade your library which it did. Now the old mac can not open the photos and
-
IPod touch and Aperture 3.1 syncing issues
I can't sync photos from Aperture 3.1 with iPod touch and iPad iOS 4.2.1. The strange think is that only the first picture of the event is synced but not the rest. Another strange think is that the most recent event syncs fine and it consists of seve
-
I am trying to transfer my HD files from my Panasonic AVCCAM to Final Cut Pro X. What are the proper set up settings to get Final Cut to read the camera?
-
SolMan 4.0 Installation - wrong password for SID OFR
Hello all, i get stuck in the phase 2 of SolMan Installation. The log states: "CJS-20004 Invalid password.<br>DIAGNOSIS: The password you specified for user 'S01OFR' is wrong.<br>SOLUTION: Enter the correct password." S01OFR has been created on the