Lion won´t accept ntfs harddrives? Why?
Hi,
I just updated to Lion and the only problem with the software is, that it won´t show or accept my ntfs harddrives. Why is that?
Is there any program for it, because I don´t want to formate my harddrives, 2 much stuff on it.
If someone could help me, that would be terrific.
Thanks
Florina
Mac OS X can read NTFS formatted disks, but cannot write to them. In order to add this functionality to your Mac, you'll need the assistance of some third party software or add-on. There are several different options available. Your best bet would be to do a Google search for different possibilities. I have heard a lot of good reviews about the NTFS Mounter plug-in.
NTFS Mounter
B-rock
Similar Messages
-
Lion won't accept my Screensaver Password
After a Log Off or the Screensaver has been activated, Lion won't accept my password to get back to the OS. If I click Switch Users and enter (the same) password it logs on without a problem. I've seen other people with the same problem but no answer so far. Has anyone found a solution to this?
Updating to 10.7.1 didn't help... Still no one any ideas?
-
HT4718 lion won't accept my password. HELP
Hello
I had to change my hard drive. I reinstalled Snow Leopard with the DVD that came with my Mac Book Pro. Then, I used my time machine to recover all my information. Everything worked just fine. Then when I wrote down my password to log in, it didn't recognized my password. After many times of trying a crossed circle appeared, so I had to erase the HD and do the process all over again. This didn't work because it won't accept the password again.
Is there anything I can do to recover the password or to make it accept it.?
I had the Lion OSX in my time machine.
Please help so I can use my Mac again!!!
Thank you
ADTMYou need the discs that came with your machine, not the one that came with the MBP. See http://support.apple.com/kb/HT2681 for details. You can get replacement discs for a nominal S&H charge from 1-800-MY_APPLE.
-
Mac Lion won't accept IP address sent from DHCP server
Upgraded to Lion a few days ago. Everything worked for a couple days. Plug in the ethernet cable today and I never get an ip address with DHCP from my router. I have 2 other devices plugged into the router and they get ip addresses normally. Captured the DHCP communication to see if I was getting a valid DHCP offer and I am...it is included. The Lion firewall is disabled. For some reason Lion isn't accepting the DHCP offer. Could this be a bug or maybe something in a cache needs to cleaned out. I connect to several different networks daily and they all work except for this one.
The line in Bold type shows the ip address being offered that never gets accepted by lion.
No. Time Source Destination Protocol Info
26 21.993141 10.19.39.97 255.255.255.255 DHCP DHCP Offer - Transaction ID 0x4e299603
Frame 26 (353 bytes on wire, 353 bytes captured)
Arrival Time: Aug 5, 2011 19:30:01.105566000
[Time delta from previous captured frame: 0.001086000 seconds]
[Time delta from previous displayed frame: 0.001086000 seconds]
[Time since reference or first frame: 21.993141000 seconds]
Frame Number: 26
Frame Length: 353 bytes
Capture Length: 353 bytes
[Frame is marked: False]
[Protocols in frame: eth:ip:udp:bootp]
[Coloring Rule Name: UDP]
[Coloring Rule String: udp]
Ethernet II, Src: e8:b7:48:e6:ab:5c (e8:b7:48:e6:ab:5c), Dst: Broadcast (ff:ff:ff:ff:ff:ff)
Destination: Broadcast (ff:ff:ff:ff:ff:ff)
Address: Broadcast (ff:ff:ff:ff:ff:ff)
.... ...1 .... .... .... .... = IG bit: Group address (multicast/broadcast)
.... ..1. .... .... .... .... = LG bit: Locally administered address (this is NOT the factory default)
Source: e8:b7:48:e6:ab:5c (e8:b7:48:e6:ab:5c)
Address: e8:b7:48:e6:ab:5c (e8:b7:48:e6:ab:5c)
.... ...0 .... .... .... .... = IG bit: Individual address (unicast)
.... ..0. .... .... .... .... = LG bit: Globally unique address (factory default)
Type: IP (0x0800)
Internet Protocol, Src: 10.19.39.97 (10.19.39.97), Dst: 255.255.255.255 (255.255.255.255)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
0000 00.. = Differentiated Services Codepoint: Default (0x00)
.... ..0. = ECN-Capable Transport (ECT): 0
.... ...0 = ECN-CE: 0
Total Length: 339
Identification: 0x00fa (250)
Flags: 0x00
0.. = Reserved bit: Not Set
.0. = Don't fragment: Not Set
..0 = More fragments: Not Set
Fragment offset: 0
Time to live: 255
Protocol: UDP (0x11)
Header checksum: 0x882c [correct]
[Good: True]
[Bad : False]
Source: 10.19.39.97 (10.19.39.97)
Destination: 255.255.255.255 (255.255.255.255)
User Datagram Protocol, Src Port: bootps (67), Dst Port: bootpc (68)
Source port: bootps (67)
Destination port: bootpc (68)
Length: 319
Checksum: 0x038d [validation disabled]
[Good Checksum: False]
[Bad Checksum: False]
Bootstrap Protocol
Message type: Boot Reply (2)
Hardware type: Ethernet
Hardware address length: 6
Hops: 0
Transaction ID: 0x4e299603
Seconds elapsed: 0
Bootp flags: 0x8000 (Broadcast)
1... .... .... .... = Broadcast flag: Broadcast
.000 0000 0000 0000 = Reserved flags: 0x0000
Client IP address: 0.0.0.0 (0.0.0.0)
Your (client) IP address: 10.19.39.98 (10.19.39.98)
Next server IP address: 0.0.0.0 (0.0.0.0)
Relay agent IP address: 0.0.0.0 (0.0.0.0)
Client MAC address: Apple_17:fd:5d (c4:2c:03:17:fd:5d)
Client hardware address padding: 00000000000000000000
Server host name not given
Boot file name not given
Magic cookie: (OK)
Option: (t=53,l=1) DHCP Message Type = DHCP Offer
Option: (53) DHCP Message Type
Length: 1
Value: 02
Option: (t=54,l=4) DHCP Server Identifier = 10.19.39.97
Option: (54) DHCP Server Identifier
Length: 4
Value: 0A132761
Option: (t=51,l=4) IP Address Lease Time = 1 day, 23 hours, 39 minutes, 50 seconds
Option: (51) IP Address Lease Time
Length: 4
Value: 00029E46
Option: (t=58,l=4) Renewal Time Value = 23 hours, 49 minutes, 55 seconds
Option: (58) Renewal Time Value
Length: 4
Value: 00014F23
Option: (t=59,l=4) Rebinding Time Value = 1 day, 17 hours, 42 minutes, 16 seconds
Option: (59) Rebinding Time Value
Length: 4
Value: 00024A78
Option: (t=1,l=4) Subnet Mask = 255.255.255.240
Option: (1) Subnet Mask
Length: 4
Value: FFFFFFF0
Option: (t=6,l=8) Domain Name Server
Option: (6) Domain Name Server
Length: 8
Value: AB44E278AB46A8B7
IP Address: 171.68.226.120
IP Address: 171.70.168.183
Option: (t=44,l=8) NetBIOS over TCP/IP Name Server
Option: (44) NetBIOS over TCP/IP Name Server
Length: 8
Value: AB443935AD2573BF
IP Address: 171.68.57.53
IP Address: 173.37.115.191
Option: (t=3,l=4) Router = 10.19.39.97
Option: (3) Router
Length: 4
Value: 0A132761
End OptionI have seen the same issue with my iOS and Mac OS devices (iPhone and MacBook Pro). I have written my own DHCP server (http://notebook.kulchenko.com/embedded/dhcp-and-dns-servers-with-arduino) and have had troubles getting my devices to connect (Windows Vista and Ubuntu devices connect fine). I suspect that this problem happens because the DHCP Offer message is sent to a broadcast address, even though (at least in my case) the broadcast flag is off in the DHCP Discover message I see.
Unfortunately you didn't include the Discover message, so I can't tell for sure, but if it indeed has the broadcast flag set to 0, then the server should send the response message using unicast as per DHCP spec (http://www.ietf.org/rfc/rfc2131.txt, section 4.1):
If the broadcast bit is not set and 'giaddr' is zero and
'ciaddr' is zero, then the server unicasts DHCPOFFER and DHCPACK
messages to the client's hardware address and 'yiaddr' address.
So, it seems like in this case the server may be at fault, even though it would be nice for Mac OS to accept broadcast responses (and would solve my problem too).
Can someone confirm that Mac OS does not accept broadcast responses to DHCP Discover and DHCP Request messages? Thanks.
Paul. -
Why won't iCloud accept my Apple (PC) ID/password?
Hello CarenzaRielle,
I know not being able to access your Apple ID can be frustrating. I have located an article that will walk you through a series of troubleshooting steps to resolve this:
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Refer to the Apple ID Support page if you are unable to reset your password using the steps in this article. If you know your Apple ID password, you can also choose to change your Apple ID or change your password.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Mountain lion won't accept dvd in slot
I've a brand new DVD drive hooked up to new Mac Mini via USB. There's a glimmer of life there: the drive sort of clears its throat when you plug it in. But I simply cannot push a DVD or CD all the way into the slot. I've tried cleaning it by inserting a DVD in wrapped in an E cloth but to no avail: it's impossible to push a disc in all the way. I've tried it on both my Macs and the drive just won't take the DVD. Is the drive faulty, or is this a Mountain Lion compatibility issue? It's most inconvenient as I need to load a piece of software from a DVD right now. Cheers.
Thanks for the advice Mike - tried it but no go. It's almost as if there's a physical blockage, but there's no reason there should be one. Very strange indeed.
Any other ideas? Anyone? -
..to 9.1.5... or said better, after asking and accepting my serial, it asks me for an "original serial" that doesn't seem to be the one i paid for..
PLEASE HELP ME !!!i used an internet paid service to unlock it !
i tried to contact the carrier services and they asked for to contract and the sim card number and some other stuff that i don't have
and when i contacted the online unlocking service he answer : that he done his job and this backed him up
IMEI : *****
Serial Number: ******
Initial Activation Policy ID: 227
MEID: Activation Policy
Description: France SFR.
IMEI: ******
Applied Activation Policy ID: 227
Part Description: IPHONE 4 BLACK 32GB-ENF
Applied Activation Policy Description: France SFR.
Product Version: 7.1.2 Next
Tether Policy ID: 227
Last Restore Date: Next Tether Activation Policy Description: France SFR.
Bluetooth MAC Address:
First Unbrick Date: 03/11/10
MAC Address: 18******CC
ICCID: *******
Last Unbrick Date: 02/09/14
Unbricked: true
Unlocked: true -
Serial number Transfer from SL to lion - Lion won't accept my volume licence.
So I successfully transferred all my programs from snow leopard except for iWork. It's a volume license so I think there's something wrong with - the migration process? - me?
Thanks!
Mac OS X (10.7.3)So you answered your own question I think - and I'm not commenting on your statement in your next post
As for your question about the current version 09 - I don't know and no one here does since we're just users like you. There has been no announcement from Apple; actually the apps work just fine, so as long as they update them, no need to pay for a new version. -
So I successfully transferred all my programs from snow leopard except for iWork. It's a volume license so I think there's something wrong with - the migration process? - me?
Thanks!Logic might migrate fine but the iWork installation scatters a few more resources and does not seem to take to migration so nicely.
If it was a school licence it seems to me it was meant for school use not personal use.
If it was a school licence and you have now graduated, it may be time for you to get your own copy. The M.A.S. version is cheap enough and allows multiple installaions on systems with the same Apple I.D.
If you are still attending the school, take it up with their system admin.
Peter -
Any thoughts on why lion won't load?
Any thoughts on why Lion won't load?
You'll need to give us a little more info to go on. Are you able to download it from the App Store? Are you having a problem installing it? Have you installed it, but are having trouble with it starting?
-
IMessage and FaceTime won't accept my Apple ID after upgrading to Mountain Lion
iMessage and FaceTime won't accept my Apple ID in order to activate after upgrading to Mountain Lion on my MacBook Pro.
My Apple ID works to sign in to the App store as well as on my iphone and iPad.
What do I need to do?This Apple doc might help ya out -> iOS: Troubleshooting FaceTime and iMessage activation
Troubleshooting Apple ID activation
After each step, toggle iMessage and FaceTime off and then on again in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Ensure that you have an active Internet connection. Check your Wi-Fi network using standard Wi-Fi network troubleshooting.
If you receive an error when signing in to your Apple ID, visit myinfo.apple.com, sign in to your account, and ensure that the primary email address has been verified.
Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
In Settings > General > Date & Time, ensure that Set Automatically is on. If Set Automatically is on, but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
Enable iMessage and FaceTime while connected to another Wi-Fi network in a different location. -
I have just exported a sequence of video in h.264 and TMPGEnc Express 4.0 won't accept the file. I have used CS3 before and works fine. It will work with Encore CS5 though. When I rename the extension file from .m4v to .mp4, it imports fine to TMPGEnc Express 4.0, why?
I have just exported a sequence of video in h.264 and TMPGEnc Express 4.0 won't accept the file. I have used CS3 before and works fine. It will work with Encore CS5 though. When I rename the extension file from .m4v to .mp4, it imports fine to TMPGEnc Express 4.0, why?
-
I am unable to activate my new iPod touch...it won't accept my password I use for my wifi for other gadgets like my iPad. It keeps telling me connection failed! Help! Why won't my password work?
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings (if you can)
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPad is locked on O2 but won't accept a O2 SIM card. Why is this?
My iPad is locked on O2 as it says this on the about bit in setting. I tried putting my O2 SIM card in my iPad but it says SIM card not valid. I got this iPad 4 second hand from a friend. I don't know why my iPad won't accept this sim as this is the Carrier for this iPad. Could someone possibly help me.
ThanksIt's an O2 iPad SIM card that is a data only SIM card. I got a new sim fort he propose that my cell phone sim wouldn't work at all so got a new iPad sim delivered today and it still doesn't work.
-
Why can I not download the latest version of Flash? Keeps asking me for my password but won't accept even though I go through a reset process of a new passwork to ensure it is correct.
What kind of password? Can you post a screenshot of that prompt?
Also, what is your operating system & version?
What is your web browser?
Maybe you are looking for
-
No getter method for property user of bean Problem
Hi everyone, I am new to this struts. I have a samll application to check login. When I run my application I get this message in my server console No getter method for property user of bean org.apache.struts.taglib.html.BEAN I saw the previous forum
-
GS60 Matrix display monitor recommendations.
Hey all, I was wondering what the best monitor setup would be on a gs60? It supports 2 external displays so what size is recommended for a smooth gaming experience in matrix setting?
-
Call Transaction in ALV Tree Display on Double Click
Hi Experts, How can i call any Transaction on Double clicking a field in ALV Tree? I'm able to call the transaction when Double clicked a field but it is not reading the value of the field on which i double click. It calls the transaction skipping t
-
Hi, Is there a std sap report wherein it would list all the assets and also forecast the depreciation period wise for say period 1 to period 12 for the year 2008. I want the listing of all the assets along with the forecast not like in asset explorer
-
Having issues with wireless phones disconnecting my wireless connection.
Hi, I need some help determining why my wireless connection keeps getting knocked off when the wireless phone is in use. I dont know if its any setting i may have but i couldnt find any. thanks a lot.