Lip Synch Issue?
Is anyone else experiencing a significant lip synch issue when using an optical (sound) / HDMI (video) setup?
I've been experiencing this since the new iPlayer update on a black box a couple of months ago to some degree. It wasn't too bad, but I had the box replaced last week when it developed a hardware fault. It had the non iPlayer release (bliss!), but on Monday the new update was applied overnight. The sound issue has come back with a vengeance - a lot worse than before. This is the first time I have used the latest (new style) release. This is happening on live TV.
After almost 3 years of uninterupted stable service, this iPlayer nonsense has really got me considering ditching Vision...
Thanks, Mark.
Guyincognito76 wrote:
Urm? And why aren't you using HDMI for the sound as well, is the HDMI going into the telly and the optical into a surround?
If the Vision box is playing sound correctly if connected directly to the TV then it must be the surround.
It's connected to a surround sound receiver that doesn't have HDMI inputs (just optical and component connections). It's not the receiver that is the problem as it works perfectly with BluRay, Wii, and Freesat. It also worked with no issues on the Vision box have until the new software release was applied on Monday.
The BT engineer that came out to fix the fault with the previous bit of kit admitted that the hardware is very reliable, but the software releases have caused a lot of issues for them. A bit of extra testing would be good before BT ship these releases out to everyone.
Similar Messages
-
Suddenly Comcast Sportsnet HD channel has lip synch issues
The past few days, Channel 577, which is Comcast Sportsnet New England in my (Boston) area, has lip synch issues. It appears to be the only channel with this issue, and the SD version of the CSNNE station (77) is fine. Since it is only this one channel I believe it must be something with the station itself, but I'm wondering if I can fix it myself somehow. Perhaps reset of the set-top box, or unplug and plug in the HDMI cable again? It's just this one channel, though, so I'm trying to avoid any changes of settings on my receiver, set top box or TV, etc.
Any ideas? Or should I just report this to Verizon's support line?
Thanks.are you watching on a dvr? I've found sometimes that when I am watching on my dvr and a lip sync issue crops up, I can pause the show for 2-3 seconds and then press play (so I am watching it "delayed") and that solves the problem. Dont know why this works but it does most of the time for me. YMMV
====================================================================================
Error exists between keyboard and chair. -
i purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be erased. Is that true? My ultimate goad is to be able to read the books on my iPhone as well. Thanks.
You should be able to copy them to your computer's iTunes via File > Transfer Purchases and you can then sync them to the iPhone (or you could re-download them directly on the iPhone)
-
How do I get rid of lip-sync issues with iTunes 10.2.2.12?
Hi Everyone.
Firstly, a very Happy Easter!
I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
The system stats for my PC are at the bottom of the post.
The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
I suppose my main questions are:
Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
Is the spec (below) of my PC causing any issues.
Here's an Easter Egg for anyone able to help!!
All the best
BandAidUK.
System Information
Time of this report: 4/24/2011, 10:13:44
Machine name: DEREK
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension 8300
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 3326MB RAM
Page File: 1273MB used, 3941MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
Card name: NVIDIA GeForce 6200
Manufacturer: NVIDIA
Chip type: GeForce 6200
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
Display Memory: 512.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0012.6099 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0221
SubSys ID: 0x02F3196E
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: Creative SB Live! Series
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Other Files:
Driver Provider: Creative Technology Ltd.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Description: SoundMAX Digital Audio
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
Manufacturer ID: 65535
Product ID: 65535
Type: WDM
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Other Files:
Driver Provider: Analog Devices
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 100, 192000
Static/Strm HW Mix Bufs: 33, 32
Static/Strm HW 3D Bufs: 33, 32
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): Yes
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Creative SB Live! Series
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
Description: Hauppauge WinTV 88x Audio Capture
Default Sound Capture: No
Default Voice Capture: No
Driver Name: hcw88aud.sys
Driver Version: 2.125.28070.0000 (English)
Driver Attributes: Final Retail
Date and Size: 3/12/2010 09:47:58, 13440 bytes
Cap Flags: 0x41
Format Flags: 0xCC0
Description: SoundMAX Digital Audio
Default Sound Capture: No
Default Voice Capture: No
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Cap Flags: 0x41
Format Flags: 0xCCC
DirectMusic
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
Registry: OK
Test Result: Not runSelect *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
In List view, you can turn off every column (in menu View > View options) except track name. -
Synching Issues with iphone 4/ itunes
When attempting to synch my iphone with itunes, the synch cannot progress past the "backing up" stage. Why?? Getting a bit frustrated now to be honest.
Every time I plug my phone into the computer, itunes informs me of the latest update required (4.3.5), but because of the synching issue, I obviously can't get the new update.
any help appreciated"iTunes could not back up the iPhone "Guru's iPhone" because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again."
The above is the error message I receive when trying to upgrade/ synch my iPhone with iTunes on my Laptop. I have the latest version of iTunes available (10.4.1) -
My project displays fine in PE8. No audio synch issues in the preview. After outputting the project to a quicktime movie withe LAN setting the audio becomes seems to run faster than the video, becoming more and more out of synch as the movie plays. Any ideas what might cause such an issue?
The Stream info in MPEG streamclip for files from both cameras gives me this info:
Bitrate: 30.31 Mpbs
Video Tracks:
DV/DVCPRO - NTSC, 720x480, 16:9, 29.9699999999999 fps, 28.77 Mbps
Audio Tracks:
16-Bit Little Endian mono, 48 khz, 768 kbps
I don't know if this helps. -
DVD Lip-Sync issues on HDTV playback
Hi, was looking for info regarding lip-sync issues after burning a DVD in DVDSP. Playback on a monitor is grand, but playback on two HDTVs have shown the entire DVD, all tracks to be out of Sync by the same time. Is this anything to do with Progressive/interlaced fields? I know that HDTV and AV systems can have issues with the processing of Progressive streams and there can be a delay with the Video which can be adjusted in their system settings but i can't expect 1000+ people to all change their settings to accommodate my DVD! lol
I shot on DSLR 25P, edited in Premiere in 25P, exported then i imported into Compressor and dropped the DVD: Best Quality 90min preset on it (MPEG-2 Video, 720 x 576 (1,048 x 576), Dolby Digital Pro 2.0 at 192kps). Then imported them into DVDSP and burned the DVD. I can't see in the preferences or anywhere in DVDSP whether this is a Progressive or Interlaced project so i don't know what my final output is onto DVD. Perhaps it just follows what is imported as an asset and im assuming at the moment to change that i have to change Progressive to Interlaced somewhere ealier in the workflow.
Because I shot on DSLR 25P, edited in 25P i exported, after much trial and error, the files from Premiere as : Match Source HI-Bitrate:
H.264 (as source)
25P AVC Coding,
1,920 x 1,080 AAC,
Square Pixels (1.0)
VBR 2 Pass
48000 Hz, Stereo (L R),
6.32 Mbit/s
(For some reason when i tried to use Adobe Media Encoder for batch exporting nothing happened after it opened, so i chose all my settings from Premiere export and did all the files individually).
So just to re-cap, why am i getting Lip Sync issues when burned to DVD and played back on an HDTV? and how can i correct this issue?
Kind regards,
Sai Kelly
For anyone interested in the background:
The reason i chose the above settings was because I was having severe issues in quality of the .M2V file for the green screen sequences during interviews, particularly with people's hair when i chose to export from Premiere or Media Encoder with any kind of DVD settings. I spent a few days trying different types of exporting, methods and presets. This was the best version and i stopped once i acheived this result. Might have been simpler to continue to try a 720p version of the above before importing to Compressor. Here is the issue, you can see the 'snowy' hair problem:
some of the different settings i tried:
Ignore 'Quality 50' below, i changed it to 80 or 100 after the screenshot and before i clicked Export.
The "Match Source HI-Bitrate" gave me the best results (blue background re-added in After Effects):
Kind regards,
Sai KellyHi Ann,
Thank you for your opinion, though i disagree.
As i said above I did try exporting directly from Premiere as Mpeg2 in many versions when i was attempting to solve the issue by changing the Bit Rate. But to no avail. The above screen shots were attempts to export a 'highest quality option' for re-encoding with a software designed specifically to compress. I don't like re-encoding as much as anyone else, but this was the only option left as Media Encoder didn't help and without beginning again and using Encore. The same would have had to happen with Encore anyway as there appears to be no Dynamic Link in Premiere Pro CC to Encore as there wasn't yet a version of Encore CC.....just checking there....After Effects and Premiere have new updates just released Media Encoder CC 7.1 which i will check out but still nothing from Encore.
I don't think you can help me with this particular issue, Ann and i'd like to hear from some other voices. Unless you have any thoughts or suggestions that will help with the Lip-Sync issue.
Thanks again,
Sai -
Apple TV2/Netflix Lip-Sync Issues
Although Netflix plays with no problems on my PC using the same wireless network that my Apple TV uses, I am experiencing severe lip-sync issues when viewing Netflix on my Apple TV2. Audio is around 400-500ms behind the video. I am connected to my TV via the HDMI out. Video and audio are perfect, just not in sync.
Any thoughts?
Thanks,
ChuckI also assumed that it was the ATV2, but then i streamed a large h.264 file from itunes on my Mac, the Apple October event from the podcast section directly from Apple, and no issues, went back to NetFlix, loaded up another movie "Superman Doomsday", and no lip-sync issue, went back to the original file, "Rocky Horror Picture Show" and lip sync galore.
I think its NetFlix creating a separate encode for ATV2 and those encodes are probably still underway, again, this is merely a guess, but its consistent with the YouTube experience, as certain videos that appear on YouTube do not appear in the Apple iteration of YouTube (iPhone, iPad, ATV2). A great example is Kanye West Runaway. It's a 30 minute long form film and appears on the YouTube, but does not appear in the YouTube IOS application. -
I am having lip sync issues with my 65L9300U. It was really bad, so your tech support told me to update my HDMI cables. I bought new HDMI 1.4 cords and it still is having issues. Whether it is NetFlix, PS4, Comcast, or whatever, the issue is still the same. I can't get the audio to sync. The voice was way out in front with my old HDMI cables. It had the opposite effect when I used by 1.4 cords. Now the video is a split seccond in front of the audio. Can you please help?
It sounds like it could need servicing to me. You might want to call support back to let them know that changing cables didn't fix it.
- Peter -
Hey all. I have a queation regarding 12 bit audio synch problems. I have digitized a tape recorded with 12 bit audio and am just now coming into video/audio synch issues and was wondering if anyone might have a workflow suggestion. Soecific questions are -
1 - Can I export the troubled clips to quicktime/ resample them at 16 bit and reimport?
2 - Some of the clips I already have edited and are in synch, do I need to correct them as well or will final cut do that on export?
3 - If I get a 12 bit/16 bit mixed bag on my timeline, can I export the mix to 2 track and convert before exporting it to compression?
ANy suggestions on how to work through this would be appreciated. I seem to have a lot of people coming to me with this setting and would like to know of any viable workflow solutions.
Thanks1. Yes. Quicktime Pro, iTunes or third party audio editing software such as Peak can resample to 48khz/ 16 bit.
2. It would be best if you can get everything in the timeline to be 48khz/16 bit.
3. See #2.
Dope slap these fools who bring you 32khz stuff. Charge them MUCHO extra for your time.
x -
Hi,
So I have a .mov source file that contains footage captured from a Sony MiniDV camera (don't ask me why we were still using that in November of last year) and I believe I possibly screwed up the capture settings. The footage is 50 minutes of uncut interview and the audio gradually falls out of synch so that by the end it's about a half to a full second slower than the video. We need to edit the file simply to trim the ends so we have a clean fade in and out.
Here's the info on the file as displayed by the Finder
I imported it into Premiere Pro CS6, put it onto a sequence, and clicked "change sequence settings" to match the clip settings.
Here are the resulting settings:
I unlinked the audio track and moved it so that the sound of the two people high fiving was synched with the video. I cut both the video and audio tracks at that frame, deleted what came after the cut, and moved the audio back to its original position. I then looked at the duration of the video track, and adjusted the duration of the audio track to match. The result was that the audio speed was adjusted to 100.03%, and appeared synched throughout the video.
I thought I had solved my problem; however, when I exported the video the audio went back to falling out of synch slowly, exactly as it does in the source file.
I exported it initially as Format: H.264, Preset: NTSC DV. Then I exported it as H.264, Youtube HD 720p 23.976. Neither worked. The sample rate for both was 48 kHz, so unless I am mistaken, that matched the rate from the source audio.
This is beyond my technical ability and I don't know where to begin fixing it at this point. I no longer have the tape that the footage was on so I can't recapture it. How do I synch the audio and video?
Any help would be much appreciated.
Thanks!
CollinYes, the second export that I tried was with the Preset that is YouTube HD 720p 23.976. I've done this before with DV footage and it works fine, all that happens is that there are two thick black bars on the sides of the video. I only did this for one of the exports on this particular project though. The first time I tried to export it it was with the NTSC DV preset, and the synch issue was still a problem. So it is independent of the pixel ratio.
-
I read a previous thread on this topic from someone who had lip sync issues with their iMovie 09 video, but they had been using slow motion effects at some point in their video. I'm having an issue with lip syncing, but have no slow motion effects.
It looks like this thread is aged, but I'm going to jump in. I'm having lip sync problems with iMovie '09 as well. I've got a short video (an imported FLIP HD video) that comes after a few slides I put together in ScreenFlow.
When I export the video created in iMovie in MPEG-4 format, and play it on the Mac that I have, it looks fine. But when I play the MPEG-4 file on any of three Windows PCs I've tried it on, the lip sync is slightly off. Are there any OTHER ideas on how to fix this? One thing I tried was to export the video uncompressed and then compress it in Handbrake, but frankly I'm a ground level neophyte and therefore couldn't get the quality right. Wah-wah-wah...and thanks in advance for any suggestions!Hi cageygee3,
Welcome to the Sony Community!
Please check if your TV is updated, kindly visit this article for further details and step by step procedures.
If my post answers your question, please click the button below "Accept as Solution"
-
MS Outlook 2003 and Iphone 2G calendar synching issues
hi,
I have just recently (after a very long IPhone download) am having synch issues. Some of my appointments are on the Iphone but not seen on Outlook. I read something about a com add in but when I tried to check this and add, my outlook didn't have this option. I am very aggravated!!!! I am in sales and have many appts during the day and now I am afraid I am going to forget one if i don't check both phone and outlook.. Please help!!!!
JanetThis is causing alot of problems no idea what percentage of windows users sync'ing with Outlook this is effecting but a lot of unhappy campers out there.
For a constantly updating discussion on this try an independent site:
http://getsatisfaction.com/apple/topics/myiphone_calendar_will_not_sync_with_outlook2007 Covers 2003 Outlook too. - (Scroll down to 16th July)
Apple although acknowledged the problem, now 2 weeks ago seem in no hurry to correct it, something to do with trying to sell MobileMe a cynic may say? Problem has mean't alot of businesses returning iphones, exchanging for Blackberries or just trying to revert back to their smartphones or ppc's.
This added to the problems of bluetooth handsfree kits not working with voicemail and 3G problems I suspect Apple are wishing they never released Firmware 2.0 and iTunes 7.7.
We are all hoping for a swift patch for this critical problem but then again we were doing that 2 weeks ago too... until then at least my XDA Orbit still works.
Repeating the appointment once so it is a reoccuring one day appointment has proved to work in the meantime - major pain though. I am testing Dionhall's fix at the moment, it sounds as if it is fixing the problem for most users. (See link above)
<Edited by Moderator> -
Hello,
I have upgraded to iOS5 last week (iphone4).
I have activated iCloud and chose to synch everything except mails and notes.
When I go to iCloud.com from my computer, I have :
- only 4 contacts in "contacts" while I have 300+ in my iphone
- nothing in calendar, while I have a lot in my iphone
- no "photostream" link, so I don't know how to see my pictures in iCloud.com
I have connected my iPhone to personnal wi-fi and to power during many days.
How can I solve this synch issue ?
Thx
AdrienIf you mean that a new reminder entered on one device doesn't show up on other devices then check that
1) The other devices are logged into the same icloud account and have reminders turned on (settings>icloud), and
2) that the remider is in the "icloud" group, and not in the "on my ipod" or whatever group. -
Hot Synch issue-accidently synch with another person
Some help would be great. I accidently hot synched with a friend's computer. Now her name is at the top of my Palm screen when I try to hot synch, and also on my palm desktop hot synch. I am unable to hot synch anything. What should I do?? I tried to restart, and her name is still there. what do I do?? Thank you
Post relates to: Palm TXWas this the first Hotsync you have ever done? There really isn't a way you can "accidentally" HotSync to another name. A blank device will trigger Palm Desktop to ask you "Create a New User" or "Use and Existing Account". You will have to pick one of the options. If you chose the latter and picked her name, then that's where all the info came from.
Hard Reset your device to start over again. When you HotSync to your computer, pick "Create a New User" and choose a name you wish.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
Maybe you are looking for
-
I am trying to install CS2 but I receive a message that my serial number is invalid.
I have been trying to install CS2 on Win XP. (My old laptop died, I still have the original disks, serial #, etc. but was unable to use because of the activation problem). I downloaded all the files from the website referenced above and tried to foll
-
The URL line accepts text, but using the "Enter" key generates no response. The right arrow at the end of the URL line will take me to the URL.
-
How to create cost element in controlling
how to create cost element in controlling for Direct meterail. i have to create for each materail or on rm consumption is enough please give me replay thanks
-
in itunes 7 when selecting cover flow art most of my album art is just swiggly coloured lines with a gray swiggly bar below this whats wrong? Windows XP Windows XP
-
Connection Issues MDM Data Manager using Vista
Hello I am trying to connect to the MDM Data Manager(v 5.5) and get a message "Cannot Connect to MDM Server". My colleague is doing the same thing and it works for him. The only difference is that he is on XP and I am on Vista. Is there something whi