Lipstick font type or how to create lipstick font type like in this image
looking to create a font type like this. Any suggestions how?
Thanks
Nothing will look as good as doing it by hand, so unless there were a lot of text, I'd do it that way.
Here's a nice font in that vein, though:
https://www.myfonts.com/fonts/mvbfonts/sacre-bleu/
You could even try... cough... Mistral, but it will probably end up looking something of an 80s pastiche.
Similar Messages
-
How to make a envelop distort like in this image
Hey guys I wanted to know how can i make a envelop distort like this image in adobe illustrator CS6. Im running it on Windows 7.
I still believe the originator of the artwork at least tried to keep to the straight and narrow. The crucial question is whether Hunter wishes to (too).
When zooming in as far as possible on the image (so it is 190 mm wide on screen), as far as I can see, the spaces are still constant width and the lettershapes at top and bottom are still straight, especially evident for the TE at the end, so I believe any deviation would be an inaccuracy. The rounding of the basically horizontal segments as in Envelope (or Art Brush) Distort should be clearly visible.
I believe Hunter may be able to make sure by zooming in on the actual artwork, and maybe measuring distances between key Anchor Points, and/or dragging with the Line Tool between them, in the latter case the top of the TE would show the greatest deviance from straightness. -
Adobe premiere elements 12 - how to create menu bar action for my inserted image button
adobe premiere elements 12 - how to create menu bar action for my inserted image button without using their movie menu theme
forbemag
I do not think that I am completely focused into this completely, so let us see if the following is going to help.
You are going to need a base for your button. When you mention "image" button, I am assuming that you are using that term to differentiate between a text button and a thumbnail type button.
The menus (main and scene) take their origin in .psd files on the hard drive and strict nomenclature and structure for Layers Palatte. And, the buttons on the menus trace back to the menu markers on the Timeline, main menu marker and order of placement of scene markers. The scene thumbnail will only appear when there is a scene marker on the Timeline to which it.
In view of all that
Where have you already inserted this "image (button)"...into the Layers Palette of a Photoshop document or other? Is this "image (button)" in a structured Layer Group in the Layers Palette with sublayer groups, text layers, graphic/background layer"?
Let me give you an example
If you have a button (with thumbnail) on the main menu and you want that to open to a specific scene in your movie, then you use a main menu marker on the Timeline at the spot that you want that button to target.
If I am getting closer to what you seek, then please further clarify the DVD navigational envisioned scheme.
Thanks.
ATR
Add On...I did not see the exchanges between us and SG until after I had posted mine. I thought that your discussions were concluded. Please excuse the interruption. -
How to create a content profile and Why this need
how to create a content profile and Why this need
Hi,
You will need profiles to control the following behavior:
- Which metadata to be shown in the checkin form and search form
- Define default values to certain metadata
- Make metadata editable, hidden, info only etc
- Allow the user to see only relevant metadata, for example you could have 50 metadata defined, but all you need for the user to input is 10 for say HR documents, you can show only these 10 metadata for the user to contribute
HTH
Regards,
- Anand -
How to create a tree structure,like I want to create Bill/Payment Tree
How to create a tree structure , like I want to create a Bill/Payment Tree containing a single node for all A/R related activities for a specific bill period, in reverse chronological order. Basically the tree should look like
+ Bill - Date: 03-17-2010 Complete
+++++ CR Note - Date: 05-04-2010 Complete
++++++++++ Pay - Date: 05-04-2010 Frozen
+ Bill - Date: 03-17-2010 Complete
+++++ Pay - Date: 05-04-2010 Frozen
And finally this should be attached as tab on the control centralThe FTree package provides functions to populate the tree - look for the topic "Manipulating a hierarchical tree at runtime
" in the online help this point to all the functions and triggers -
How to create a HTML page like iView, thanks in advance!
How to create a HTML page like iView, thanks in advance!
I'm a newcomer, would you please tell me how to create a HTML page in WebDynpro ? In fact, i want create one welcome page which use html format and include some javascript.
thanks again.jakinapallykrishna , thank you very much for you reply.
The pdf file is a simple application, but i want know how create a view in HTML format (<HTML>... </HTML>), maybe use HTMLB control, i don't sure it.
In fact, I need create a view in portal, some pictures in it, once mouse over one picture, it need change another picture replace old one. I don't know how to do it, just know it can be handled in HTML page. So, i need help.
Thanks. -
How to create a repeating region like the attachements in Gmail
I don't even know how to begin Googling or searching here for
this topic. But I've got a form and I want to have two fields show
up for inputting the fabric type and then the pattern name. This
site will allow them to request fabric swatches to see in person
how they look and make a decision for their furniture. And if
customers want to ask for more than one sample, I want to be able
to have a link that says, "Request another" and when clicked, it
creates another instance of those two fields automagically, just
how the attachments in Gmail work.
Is this something possible with Spry? I'd like to think it
is, but it might need some jury rigging to ensure that the ids for
those text inputs are all unique and such. But like I said, I don't
even know how to begin searching for this topic since "repeating
area" or "repeating region" brings back 1000s of unrelating
results.
Anyone have any experience doing something like this and
could shed some light on it and/or point me toward some resources
that could help out?
Thanks!Hi unnamed,
Suppose you have an id that identifies your record.
Go to Report definiton, tab report attirbutes.
Select the id of your record.
Create a link to the page you want to go to.
Hope this helps.
If not, I suggest you to create a from with report, and analyze the way the wizard has generated it.
Leo -
How to create an easteregg that will reveal an image
I created a flash movie which resembles a control panel. I created a image of the group of people that worked on the project and I want the image to be hidden until the user types a key combination that would trigger the image to appear and dissapear when clicked. This url is something like what I was looking for, (www.virtualmarketingblog.com/how-to-create-alert-boxes-in-flash/) but I want an image to appear instead, can this be customized? The only problem is, I'm not really good at actionscript. Is there any tutorials out there that may show an easy way to do this. The attached file is a sample of my interface.
Thankshere's code for multikey as2 detection:
http://www.kirupa.com/forum/showthread.php?t=211149 -
How to create a DVD menu like an animated Flash Menu?
Hello. I'm trying to figure out how to create an animated menu in Encore for a DVD, much like how menus are that are created in flash. How can I create one in Encore for a DVD menu? Thanks.
Use After Effects:
Adobe Encore * Using After Effects to enhance menus
http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html -
How to create clipping paths shape like a slice of a circle?
I want to make a DVD label by dividing the circle into 8 equal slices (like cutting a pie 4 times). In each slice I will put an actor's photo in it.
I think I need to create 8 layers to house the 8 slices of photo, each layer gets a clipping path that is in the shape of a 45 degree slice of the circle. Once I have this setup I can paste photos into the layers and adjust the photos until it looks good in the confine of each slice.
The question is how to create these clipping paths in the shape of a slice of the pie? I have already drawn a 120mm circle (using the elipse path tool) denoting the outside boundary of the dvd label. But I don't know how to cut it into 8 precise slices of 45 degree each. Help?Here's another way:
Make a circle and a square that covers one quadrant of the circle. Select the square with the Path Selection Tool. Edit > Free Transform, using the reference point that corresponds to the center of the circle, and 90 minus the angle of the slice into the Horizontal Skew field. Hint: you can copy the results from the Windows Calculator and paste them directly into Photoshop for this. This will give you greater precision that you might care to enter by hand.
Once you have committed the transform, select 'Intersect shape areas' in the option bar for the Path Selection Tool, and click Combine. There's your slice. -
How do I create a mottled texture like in this poster?
Hello,
I am trying to figure out how to create this mottled texture used in the poster below? Looks like a noise filter of some kind. Would I be better using Photoshop or Illustrator for this? I am using the texture in the context of a book, repeating the texture on certain pages.
Thanks alot!
HenryHenry,
Have you tried the Effect>Pixelate>Whatever, or something else in that area of the Effect dropdown? There are some options there. -
How to create ADF BC components like EO from "View with INSTEAD OF trigger
I have a "View with INSTEAD OF trigger" on a external schema. is it possible to create ADF EO on top of this view in my local schema?. If possible, then is it possible to insert/update that external table using ADF standard data controls and Application module?. I'm trying to see if it's possible with standard ADF controls without calling pl/sql API to insert/update that external table. any ideas are appreciated.
Regards,
Suryahttp://stegemanoracle.wordpress.com/2006/03/15/using-updatable-views-with-adf/
-
How to create a text effect like this (see example)
Hello everybody,
i would like to create a text, pretty similiar to this shirt: http://www.kuhvet.com/wp-content/uploads/2012/06/OKC-Conference-Champs-LR-T-shirt.jpg
So, the stext hould appear in 3D (kind of) and also should have a golden and silver outline. Also the shadow should drop in front of the text.
I hope that's possible and not that hard to create? I'm a beginner to Illustrator (CS4).
Thanks a lot for your help
Warm regards from Germany
FlorianI would not waste time using AI 3D tools to accomplish this effect. It is 1 point perspective. Start with your front text, establish a horizon line and vanishing point, scale and duplicate the text using the vanishing point as your center of scaling, then connect the points to create the "extruded effect" between the to sets of text. You can outline the text to accomplish this.
For the reflected text, as John suggested, duplicate your text and distort it. Read about "Envelope Distortion" meshes. These will keep your distorted text fully editable, if that is a concern.
Have fun learning Illustrator. -
How to create a single view like report ?
Hello,
basic task is to present a user with 2 versions of the record from the DB. User then will decide either to "approve" the newer version or disregard the changes.
I'm thinking of presenting these rows in a 2 single view report forms.
how do i create this type of report ?
Thank you
AndrewAndrew:
You can create the report query as
select apex_item.radigroup(1,record_id) Approve , rpt_column1,rpt_column2....
from table tab where record_id=<record id of old record>
UNION
select apex_item.radigroup(1,record_id) Approve , rpt_column1,rpt_column2....
from table tab where record_id=<record id of new record>You then add a 'Submit' button and a post-submit process to update the database based on the user's selection. The user's selection will be available in the 'f01' array.
Varad -
How to create Components in as3 like SeekBar
How to crates custom componts like SeekBar compont. SeekBar speciality is if available in stage. automatically working with FLV Playback component. How can i create this type of components.
Don't worry about the UI components development since there is a poweful GUI library that works
for the J2ME PP. This is LwVCL that is available here: www.lwvcl.com
See the www.lwvcl.com/online-demo.php demo applet to understand what the components set looks like.
Maybe you are looking for
-
I'm trying to update my new-to-me MacBook Air from 10.6.7 to Mountain Lion, but the app store won't let me make the purchase. It keeps saying it's having tech issues, but I wonder if I can even use the app store with 10.6.7. And if not, how the heck
-
What is it with yield() that I don't understand?
The following code starts a thread that awaits a notification that never comes. However, I was expecting the Foo main thread to enter the running state again sometime after it yields and print the last line "main running again", but not so. The progr
-
When I try to purchase Mountain Lion i get an error message: "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed." I can purchase other apps, why not Mountain Lion. I get
-
Hi all, In copy controls we maintained pricing type B- carryout new pricing. Eventhough in pricing analysis its showing the current prices, Butthe sales order prices are being copied from reference sales order i.e. Item conditions screen. Any body c
-
How do you change the Green "Adobe Captivate" loading animation in a SWF?
Hello! I would like to replace the loading image that I have inserted (below) to something else. This is the loading image that appears when the SWF is loading in an internet browser. Does anyone know how to do this? Thanks,