LiquidData SP2 Web Services

Hi,
I am getting one problem with LiquidData SP2. I am invoking a Web Service (LiquidData
query exposed as WS) through a Java client and getting following exception,
com.bea.ldi.server.common.MetaDataException
at com.bea.ldi.server.common.DefaultStoredQueryMetaData.listStoredQuery
nfo(Unknown Source)
at com.bea.ldi.webservice.QueryHandler$WSDLWrapper.<init>(Unknown
Source)
Same Web service is running fine with LiquidData SP1. I am trying SP2 b/c with
SP1 it had some issue with .NET client but i will test that after it will pass
Java test.
(Its happening with all the queries which accept some input parameters)
Any suggestions????
TIA

Yws - I sent you an update.
- Mike
"Phil Perkins" <[email protected]> wrote:
>
Was the cause of this ever established?
"Mike Reiche" <mreiche@newsgroup_only.com> wrote:
The WSDL's generated by LD8.1sp2 are fine.
- Mike
"Mike Reiche" <mreiche@newsgroup_only.com> wrote:
Open a case with BEA Support. I am investigating a problem with the
WSDL's generated
by LD 8.1sp2 - will post again when I have more info. Could be thatleading
spaces
before the <?xml..> are causing problems.
- Mike
"Najeeb" <[email protected]> wrote:
Hi,
I am getting one problem with LiquidData SP2. I am invoking a Web
Service
(LiquidData
query exposed as WS) through a Java client and getting following exception,
com.bea.ldi.server.common.MetaDataException
at com.bea.ldi.server.common.DefaultStoredQueryMetaData.listStoredQuery
nfo(Unknown Source)
at com.bea.ldi.webservice.QueryHandler$WSDLWrapper.<init>(Unknown
Source)
Same Web service is running fine with LiquidData SP1. I am tryingSP2
b/c with
SP1 it had some issue with .NET client but i will test that afterit
will pass
Java test.
(Its happening with all the queries which accept some input parameters)
Any suggestions????
TIA

Similar Messages

Ignoring Http basic authentication header in wls 7.0.sp2 web service servlet (weblogic.webservice.server.servlet.WebServiceServlet)

Hi!
We need to implement authentication using our own methods, and the authentication
information is provided to the web service implementation in a basic authentication
header. The problem is, that the servlet
weblogic.webservice.server.servlet.WebServiceServlet, which handles web services
in
wls 7.0.sp2, always attempts to perform authentication, if the header is present.
Is there any way to circumvent this, because we want to implement authentication
on our own?
I already know two workarounds:
The best would of course be to implement a custom security realm for our own
authentication system. This is not an option, implementing an own security
realm is overkill for this specific web service.
The other way would be to route the requests by way of a custom servlet, which
would
remove the basic authentication header, and put the authentication info in custom
headers, such as x-auth: <user:password>, or smthng similar, and after successful
authentication, make a call to bea's servlet weblogic.webservice.server.servlet.WebServiceServlet.
But still, I'd like to know if there is any way to tell bea's servlet to ignore
the basic
authentication header?
Oh yeah, by the way, this is URGENT, as always. (really!! ;)
Toni Nykanen

Currently there is no option to turn off security check.
I think you can use a servlet filter mapped to the URL
of your service, instead of a proxy servlet?
Regards,
-manoj
http://manojc.com
"Toni Nykanen" <[email protected]> wrote in message
news:3ef1577b$[email protected]..
>
Hi!
We need to implement authentication using our own methods, and theauthentication
information is provided to the web service implementation in a basicauthentication
header. The problem is, that the servlet
weblogic.webservice.server.servlet.WebServiceServlet, which handles webservices
in
wls 7.0.sp2, always attempts to perform authentication, if the header ispresent.
Is there any way to circumvent this, because we want to implementauthentication
on our own?
I already know two workarounds:
The best would of course be to implement a custom security realm for ourown
authentication system. This is not an option, implementing an own security
realm is overkill for this specific web service.
The other way would be to route the requests by way of a custom servlet,which
would
remove the basic authentication header, and put the authentication info incustom
headers, such as x-auth: <user:password>, or smthng similar, and aftersuccessful
authentication, make a call to bea's servletweblogic.webservice.server.servlet.WebServiceServlet.
>
But still, I'd like to know if there is any way to tell bea's servlet toignore
the basic
authentication header?
Oh yeah, by the way, this is URGENT, as always. (really!! ;)
Toni Nykanen

Attachment in WLS 7 sp2 Web Service

Hi, I'm trying to send to a Web Service in WLS7 sp2 SOAP message with attachments. My problem: when I don't add any attachment to SOAP message all go OK, but when I add an attachment with the "href" attribute in an element of the message (I need do it because I use the MM7 protocol of 3GPP), WLS7 donÂ´t accept my message and tell me: "The ID referenced by ..... is unknow". The Content-ID of attachment is equal to value of the href attribute.
Please, I need help with this!! If anyone knows any URL or sample code that can help me, please, reply to this post.
Thanks and sorry, my english is not very well.

Currently there is no option to turn off security check.
I think you can use a servlet filter mapped to the URL
of your service, instead of a proxy servlet?
Regards,
-manoj
http://manojc.com
"Toni Nykanen" <[email protected]> wrote in message
news:3ef1577b$[email protected]..
>
Hi!
We need to implement authentication using our own methods, and theauthentication
information is provided to the web service implementation in a basicauthentication
header. The problem is, that the servlet
weblogic.webservice.server.servlet.WebServiceServlet, which handles webservices
in
wls 7.0.sp2, always attempts to perform authentication, if the header ispresent.
Is there any way to circumvent this, because we want to implementauthentication
on our own?
I already know two workarounds:
The best would of course be to implement a custom security realm for ourown
authentication system. This is not an option, implementing an own security
realm is overkill for this specific web service.
The other way would be to route the requests by way of a custom servlet,which
would
remove the basic authentication header, and put the authentication info incustom
headers, such as x-auth: <user:password>, or smthng similar, and aftersuccessful
authentication, make a call to bea's servletweblogic.webservice.server.servlet.WebServiceServlet.
>
But still, I'd like to know if there is any way to tell bea's servlet toignore
the basic
authentication header?
Oh yeah, by the way, this is URGENT, as always. (really!! ;)
Toni Nykanen

Unable to invoke WebLogic 8.1 sp2 web service from a java proxy client...

I am not able to invoke a web service deployed on WebLogic 8.1 SP2 via a client using the proxy jar provided by WebLogic's JWS > Overview > Generate Java Proxy tool.
I am getting a java.net.ConnectException.
Both the client and the WebService are on the same server.
Thanks!!
Inder./

Please see the instructions below. If this does not help, please open a case with customer support and tell them it may be related to CR235479
DESCRIPTION:
When a platform domain is created, the admin server can be started without
any issues and a managed server can also be started without any errors if
using startManagedWebLogic.sh. But when a managed server is started using the
nodemanager, the managed server fails to start with the following error.
The WebLogic Server did not start up properly.
java.lang.NoClassDefFoundError: com/bea/wsrp/util/debug/Debug
(Complete stack trace with be added as a note)
The reason for this is that:
startWebLogic.sh(cmd) and startManagedWebLogic.sh(cmd) for platform domains
call <User domain>/setDomainEnv.sh which includes all the jars necessary for
a platform domain in the CLASSPATH.
Whereas startNodeManager.sh calls <WL_HOME>/common/bin/commEnv.sh, which is
the same for both platform and server installations of weblogic and has only
weblogic.jar in the CLASSPATH.
Looking at historical cases, the steps to start NodeManager successfully in a
platform domain are:
1.
a. Copy admin server classpath (from <user Domain>/startWebLogic.sh) to
that of all managed servers in the 'Remote Start' tab of the WLS Console
OR
b. Copy admin server classpath to <WL_HOME>/server/bin/startNodeManager.sh
(If the same nodemanager is used to manage server domain servers and platform
domain servers, will there be any issue with this approach??)
2. Copy the wsrpKeystore.jks file from your domain directory to the
nodemanager directory (the parent of the directory where all the server
directories are replicated in the node manager. By default: <WL
HOME>/common/nodemanager)
But these steps are not publicly documented in edocs.
CONFIGURATION:
Weblogic Platform Domain 8.1 (all service packs)
WORKAROUND:
Steps 1 and 2 above.

Installing collab 4.1 sp2 - Web services enhancement

All,
I have been reading through the install guide for collab and one of the pre install steps is to install Web services enhancement 2.0. But if I do a search on www.microsoft.com for Web Services Enhancement all I find is Web Services Enhancement 3.0. Can I install 3 instead of 2? Has anybody done this? I will be doing this install on Monday. Any help would be appreciated.
Thanks,
Berney

Hi Dave,
Please check the below link,
How to create Xcelsius Dashboard based of BI Web Service ( BIWS )
Using Webservice in Dashboard
Webservices in Dashboard - Issue
Also change your original link here and try to load
(sample link)
From:
http://BOE:8080/dswsbobje/qaawsservice/bisw?def=1&cuid=xxxxxxxxxx
To:
http://BOE:8080/dswsbobje/qaawsservice/bisw?wsdl=1&cuid=xxxxxxxxxx
or else can you post your url here.
Hope this helps.
--SumanT

12002 The Reporting Web Service is not working.

Hi :)
I have WSUS on Windows Server 2012 std. with Internal Database. Today I've installed 7 updates from patch tuesday and after restart I've got
error 12002 The Reporting Web Service is not working
I can see now that updatet clients can not report their status anymore :(
What's up ? Any suggestion ?
Best regards
Nenad

Hi,
I would start by verifying that the /ReportingWebService resource is properly configured in IIS.
Correct configurations can be found in the WSUS Technical Reference Guide: IIS
Settings for WSUS 3.0 SP2 Web Services.
Also,Under ReportingWebService
Made sure all were set to disabled except for Anonymous Authentication
Anonymous Authentication Enabled
ASP .NET Impersonation Disabled
Basic Authentication Disabled
Forms Authentication Disabled
Windows Authentication Disabled
Regards,
Clarence
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Need help with Web Services SDK.

I am new to Web Services SDK can I get documentation on same.

For documentation about the BOE XI R2 SP2 Web services go to our DevLibrary: http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
then locate the Web Services topic under which, you will find the necessary info to help you deal with BOE Web Services.
Cheers
Alphonse

How to use call back and user session id based conversation with web service in weblogic 6.1 sp2 ?????????

Hi, every one:
Here's my question of my day - >>>
I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K, and
I got a web service up and running called Price Update web service through
which user can pick up a price and push a deal to another web service
called: deal service, the deal service will take the user deal and book the
deal ( sending a JMS message to a Queue, a MD will pick up and do the work,
then send the confirmation to another JMS Queue ), then the confirmation
will be picked up and sent to another web service , called: User Deal
Confirmation Service, here's the question:
1. Since the client application is only allowed to see its own confirmed
deals, how I can make the confirmed deal encrypted based on a server
generated key or the session id that client application provides
2. Now, I have 3 webservices: update, deal and confirm, each of them has a
client.jar file available - from the client application point of view, do I
need all these 3 client.jar, or I just need one of them ?????
3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
beta, you can do this easily in the workshop, in the second question above,
I think I need some how relate the confirmation to the client conversation
id ??
thanks a lot for the input, have a nice day.
regards,
mark.

Any comments ?
mark
"markhu" <[email protected]> wrote in message
news:[email protected]..
Hi, every one:
Here's my question of my day - >>>
I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K,and
I got a web service up and running called Price Update web service through
which user can pick up a price and push a deal to another web service
called: deal service, the deal service will take the user deal and bookthe
deal ( sending a JMS message to a Queue, a MD will pick up and do thework,
then send the confirmation to another JMS Queue ), then the confirmation
will be picked up and sent to another web service , called: User Deal
Confirmation Service, here's the question:
1. Since the client application is only allowed to see its own confirmed
deals, how I can make the confirmed deal encrypted based on a server
generated key or the session id that client application provides
2. Now, I have 3 webservices: update, deal and confirm, each of them has a
client.jar file available - from the client application point of view, doI
need all these 3 client.jar, or I just need one of them ?????
3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
beta, you can do this easily in the workshop, in the second questionabove,
I think I need some how relate the confirmation to the client conversation
id ??
thanks a lot for the input, have a nice day.
regards,
mark.

Weblogic Web services on WLS 6.1 SP2

Hi all,
I was trying out a simple web service on Weblogic 6.1 SP2. I have
written a RPC based service which is published and deployed correctly
as per the documentation.The problem comes when i am calling this
service.Sometimes i get output from the webservice.But sometimes i get
error saying that FileNotFoundException.I am not able to understand
why this is happening ..Bcos its not consistent..Next time i run the
program GOD only knows if the service will run or no..( may be
weblogic guys know).Please help me..as i need to solve this issue
ASAP.
thanks and regards,
amit

Please post this in the webservices newsgroup.
-- Rob
amit wrote:
Hi all,
I was trying out a simple web service on Weblogic 6.1 SP2. I have
written a RPC based service which is published and deployed correctly
as per the documentation.The problem comes when i am calling this
service.Sometimes i get output from the webservice.But sometimes i get
error saying that FileNotFoundException.I am not able to understand
why this is happening ..Bcos its not consistent..Next time i run the
program GOD only knows if the service will run or no..( may be
weblogic guys know).Please help me..as i need to solve this issue
ASAP.
thanks and regards,
amit

Error "Unable to Load URL" in Dashboard Design 4.1 SP2 while create web service connection

Hello Experts,
I am using SAP BO Dashboard Design 4.1 SP2.
I have create one web Intelligence report and from it i create web services url using of publish data feature.
when I use this url to create Web service(Qaaws) connection in dashboard It is showing me error " Unable to Load URL "
URL is working fine in browser in server system where i install SAP BO 4.2 but it is not working in my system where i installed dashboard design.
Please suggest how do i make connection using of this URL in dashboard.
Do i miss something or doing wrong ? then guide me.
Thanks and Regards,
Dhaval Dave

Hi Dave,
Please check the below link,
How to create Xcelsius Dashboard based of BI Web Service ( BIWS )
Using Webservice in Dashboard
Webservices in Dashboard - Issue
Also change your original link here and try to load
(sample link)
From:
http://BOE:8080/dswsbobje/qaawsservice/bisw?def=1&cuid=xxxxxxxxxx
To:
http://BOE:8080/dswsbobje/qaawsservice/bisw?wsdl=1&cuid=xxxxxxxxxx
or else can you post your url here.
Hope this helps.
--SumanT

Web-services Error with 6.1sp3 that doesn't occur with sp2

I have recently began testing of our application using the newly released weblogic
server 6.1 sp3. I took our existing compiled ear file and generated web-services
client.jar file from our last weblogic 6.1 sp2 compile, deployed it on the new
install of 6.1 sp3 and everything worked great.
Then, I went to make some coding changes and recompiled my application using the
6.1 sp3 binaries. Now, whenever I try to make a web-services call, I get the
following exception:
java.lang.NoClassDefFoundError: weblogic/net/http/HttpsURLConnection
This error seems to be occurring on the following statement:
WebServiceProxy proxy = WebServiceProxy.createService(new java.net.URL( webProxyUrl
The strange part of the error is that my url is http://... and not https://.
Also, in my wsgen statement for ant, it states the protocol as http.
Regardless, If I replace the generated client.jar with the old client.jar generated
from 6.1sp2, it works just fine.
Has anyone else experienced this problem?
Thanks,
Brian Butler
[email protected]

I wonder if you have mix up in installing different versions of LabView/nidaq
LabView 5.1.1 requires daqdrv file to access daq, the file is automatically added to the suport files when you use the application builder to make an exe file
where as
LabView 6 and above requires Lvdaq.dll

EP6 SP2 APIs through web services/urls?

Hi,
One general question to begin this thread -
Can I do anything the portal APIs (UME, KMC and all
the rest) allow me to do and expose it for external
application usage as a web service/url/whatever? If
no, who knows what can be exposed and what is not?
Thanks all,
Yuri

Anyone?

WSUS not working completely, no MMC connect, all web services are not working

Hello all,
I have a problem not sure what causing it or what is the source of it as I am not into WSUS that much...
THe status is as follows:
I have 1 server 2008 sp2 RTM x64, I had WSUS 3.0 SP2 on it since a while, it was working fine until a week ago, when I started receiving the below messages in the event viewer
I have spent too much time trying to trace or troubleshoot this issue, but all I got was to check the registry and check permissions on the temp folder and other folders, I have done complete removal with the database for the old WSUS and reinstalled it
again but I got the same problem
Nothing strange and no problems happened on the server perior to this issue, it just happened...
Any help will be appreciated
Regards
============== MSG 1 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:52:54 PM
Event ID:      7053
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.InvalidOperationException -- Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html>
    <head>
        <title>Security Exception</title>
        <style>
         body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
         p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
         b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
         H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
         H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
         pre {font-family:"Lucida Console";font-size: .9em}
         .marker {font-weight: bold; color: black;text-decoration: none;}
         .version {color: gray;}
         .error {margin-bottom: 10px;}
         .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
        </style>
    </head>
    <body bgcolor="white">
            <span><H1>Server Error in '/ApiRemoting30' Application.<hr width=100% size=1 color=silver></H1>
            <h2> <i>Security Exception</i> </h2></span>
            <font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
            <b> Description: </b>The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact
your system administrator or change the application's trust level in the configuration file.
            <br><br>
            <b> Exception Details: </b>System.Security.SecurityException: That assembly does not allow partially trusted callers.<br><br>
            <b>Source Error:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code>
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.</code>
                  </td>
               </tr>
            </table>
            <br>
            <b>Stack Trace:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code><pre>
[SecurityException: That assembly does not allow partially trusted callers.]
   ASP.global_asax..ctor() +0
</pre></code>
                  </td>
               </tr>
            </table>
            <br>
            <hr width=100% size=1 color=silver>
            <b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.4214; ASP.NET Version:2.0.50727.4209
            </font>
    </body>
</html>

Source
Microsoft.UpdateServices.Administration
Stack Trace:
   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
   at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_AdminApiTools()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_ServerState()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.SetNavigationItemEnabledStates()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.OOBEWizardInitialize()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">7053</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:52:54.000Z" />
    <EventRecordID>884368</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.InvalidOperationException -- Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html>
    <head>
        <title>Security Exception</title>
        <style>
         body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
         p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
         b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
         H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
         H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
         pre {font-family:"Lucida Console";font-size: .9em}
         .marker {font-weight: bold; color: black;text-decoration: none;}
         .version {color: gray;}
         .error {margin-bottom: 10px;}
         .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
        </style>
    </head>
    <body bgcolor="white">
            <span><H1>Server Error in '/ApiRemoting30' Application.<hr width=100% size=1 color=silver></H1>
            <h2> <i>Security Exception</i> </h2></span>
            <font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
            <b> Description: </b>The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission
please contact your system administrator or change the application's trust level in the configuration file.
            <br><br>
            <b> Exception Details: </b>System.Security.SecurityException: That assembly does not allow partially trusted callers.<br><br>
            <b>Source Error:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code>
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.</code>
                  </td>
               </tr>
            </table>
            <br>
            <b>Stack Trace:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code><pre>
[SecurityException: That assembly does not allow partially trusted callers.]
   ASP.global_asax..ctor() +0
</pre></code>
                  </td>
               </tr>
            </table>
            <br>
            <hr width=100% size=1 color=silver>
            <b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.4214; ASP.NET Version:2.0.50727.4209
            </font>
    </body>
</html>

Source
Microsoft.UpdateServices.Administration
Stack Trace:
   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
   at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_AdminApiTools()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_ServerState()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.SetNavigationItemEnabledStates()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.OOBEWizardInitialize()</Data>
</EventData>
</Event>
============== MSG 2 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      13051
Task Category: 6
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
No client computers have ever contacted the server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">13051</EventID>
    <Level>3</Level>
    <Task>6</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884373</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>No client computers have ever contacted the server.</Data>
</EventData>
</Event>
============== MSG 3 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12002
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The Reporting Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12002</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884374</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The Reporting Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 4 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12012
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The API Remoting Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12012</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884375</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The API Remoting Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 5 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12032
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The Server Synchronization Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12032</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884376</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The Server Synchronization Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 6 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12022
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The Client Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12022</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884377</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The Client Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 7 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12042
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The SimpleAuth Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12042</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884378</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The SimpleAuth Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 8 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12052
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The DSS Authentication Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12052</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884379</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOAMIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The DSS Authentication Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 9 ==============
Log Name:      Application
Source:        ASP.NET 2.0.50727.0
Date:          9/21/2011 1:53:09 PM
Event ID:      1314
Task Category: Web Event
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
Event code: 4010
Event message: An unhandled security exception has occurred.
Event time: 9/21/2011 1:53:09 PM
Event time (UTC): 9/21/2011 10:53:09 AM
Event ID: 11b96ca285fa46d2a05d38e2e9b168af
Event sequence: 1
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/715372307/ROOT/ApiRemoting30-7-129610759889193820
    Trust level: High
    Application Virtual Path: /ApiRemoting30
    Application Path: C:\Program Files\Update Services\WebServices\ApiRemoting30\
    Machine name: APP-SVR
Process information:
    Process ID: 8332
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Request information:
    Request URL:
http://app-svr:8530/ApiRemoting30/WebService.asmx
    Request path: /ApiRemoting30/WebService.asmx
    User host address: 192.168.5.22
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Custom event details:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="ASP.NET 2.0.50727.0" />
    <EventID Qualifiers="16384">1314</EventID>
    <Level>4</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:09.000Z" />
    <EventRecordID>884380</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>4010</Data>
    <Data>An unhandled security exception has occurred.</Data>
    <Data>9/21/2011 1:53:09 PM</Data>
    <Data>9/21/2011 10:53:09 AM</Data>
    <Data>11b96ca285fa46d2a05d38e2e9b168af</Data>
    <Data>1</Data>
    <Data>1</Data>
    <Data>0</Data>
    <Data>/LM/W3SVC/715372307/ROOT/ApiRemoting30-7-129610759889193820</Data>
    <Data>High</Data>
    <Data>/ApiRemoting30</Data>
    <Data>C:\Program Files\Update Services\WebServices\ApiRemoting30\</Data>
    <Data>APP-SVR</Data>
    <Data>
    </Data>
    <Data>8332</Data>
    <Data>w3wp.exe</Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>http://app-svr:8530/ApiRemoting30/WebService.asmx</Data>
    <Data>/ApiRemoting30/WebService.asmx</Data>
    <Data>192.168.5.22</Data>
    <Data>
    </Data>
    <Data>False</Data>
    <Data>
    </Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
</EventData>
</Event>
Saleh Ramadan

So, in reality, this issue has nothing at all to do with "it was working; now it is not", because you've destroyed all of the evidence that would exist in a "was working; now is not" scenario. What we really have here is a NEW installation that has failed.
So, from the perspective of a NEW installation that is not working...
Are there any other roles, features, services, or applications installed on this server?
Did you install the Web Server Role exactly as described in the documentation?
Did you install the WSUS Role exactly as described in the documentation?
Were there any other roles, features, services, or applications installed onto this server
after your original (working) installation of WSUS?
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2011)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
My Blog: http://onsitechsolutions.spaces.live.com
Oh, well, I have red and followed the documentation exactly step-by-step on the technet library, and I can guarantee you nothing went wrong because this is not my first installation for it
When I told you about the old damaged installation and the new installation which is also failed and showed me the same symptoms as the old one, I was sure that nothing wrong with the WSUS itself, but rather it is something wrong with the environment
Answering to your above questions, the answer for all is that: that server is only used for WSUS, nothing more
Anyway, I have managed to restore the service thanks to your previous reply where you point to the CONFIG folder inside the NET framework folder, I checked the files in there, some were changed to the date I think has stopped the service, so I repaired the
NET framework 2, and restarted
It is working fine now and syncing with the update server
Saleh Ramadan

How to prevent downloading wsdl in weblogic web service client

Hi,
I get a problem regarding weblogic web service client. My working environment:
weblogic server 8.1
Windows XP SP2
JDK 1.4
I use the weblogic tool to generate the client jar file from the wsdl file.
     <target name="generate-client">
          <clientgen wsdl="ACCESS.wsdl"
               packageName="xxxxxx.client"
               clientJar="${client}/${AccessClient_jar_file}"
               keepGenerated="true"
               saveWSDL="true"
          />
          <javac srcdir="${source}"
          destdir="${client}"
          includes="**/AccessClient.java">
          <classpath>
          <pathelement path="${client}/${AccessClient_jar_file}"/>
          </classpath>
          </javac>
     </target>
After that, I create a client java file to invoke the service deploy in the server.
public static void main(String[] argv)
throws Exception
     int transactionId = 100;
     int id = 1000;
// Setup the global JAXM message factory
System.setProperty("javax.xml.soap.MessageFactory", "weblogic.webservice.core.soap.MessageFactoryImpl");
// Setup the global JAX-RPC service factory
System.setProperty( "javax.xml.rpc.ServiceFactory", "weblogic.webservice.core.rpc.ServiceFactoryImpl");
AccessServicePorts ws = new AccessServicePorts_Impl(argv[0]);
AccessService port = ws.getAccessService();
// Resource - create
Resource resource = new Resource();
resource.setRES_CD("Create ResCo");
resource.setCODE_CODE("code_cod");
resource.setRES_TYPE("Resource typ");
resource.setCOMMON_FIELD(common);
AccessDefaultResult resultItems = port.createResource(resource);
System.out.println("createResource : " + resultItems);
I find that this web service client always issue 2 http requests to invoke an web service method deployed in server.
1st http reqeust:
GET /AccessEpol/EpolServiceSoap?WSDL HTTP/1.1
User-Agent: Java/1.4.2_08
Host: 127.0.0.1:8001
Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Connection: keep-alive
the return result is the wsdl downloaded from the server.
2nd http request is the real web service request.
The question is how could I eliminate the 1st http request because it's really unnecessary. I use other web service client like Axis 1.x, Axis client never has the http request to download the wsdl from the server.
I read through weblogic web service document. It do mentions that put saveWSDL="true" in the clientgen ant task. the default value for saveWSDL is true already. I did try saveWSDL="false" also. None of them can eliminate the 1st http request.
appreciate for any answer my question?

Hi David,
thanks for the reply.
More or less I agree some points you mentioned above.
I did use Axis 1.x to test the inter-operability. The web service was developed in Weblogic 8.1 and is a part of an existing web application. It will be merged to existing application deployed in weblogic 8.1.
I also program the web service client to test the web service.
The implementation of the server and client will be handed over the project team and training for supporting or continuous development have to be conducted by me. So I don't like to use two types of technologies which will make thing complex.
I found this issue when I tried to protected the web service endpoint, eg http://localhost:7001/epol/service, using the web application Basic mechanism. The wsdl URL http://localhost:7001/epol/service?WSDL is also protected in this case. Unfortunately the username/password pair is not sent to the server when the weblogic client download the WSDL from the server. In this case, the client failed and throw exception.

10.1.3.0 web service won't deploy in 10.1.3.1

I have a web service war file containing a bottom-up web service that uses JSR 181 annotations to expose methods in a Java class as web service operations. I also use the SOAPMessage annotations to define a handler. This web service is assembled using the OC4J WS assembler and works well with 10.1.3.0. However when I tried today to deploy the same war file into a 10.1.3.1 instance I got this error.
[Loaded oracle.j2ee.ws.server.deployment.Handler from file:/C:/apps/oc4j10131/webservices/lib/wsserver.jar]
[Loaded sun.util.logging.resources.logging from c:\java\j2se5\jre\lib\rt.jar]
07/01/26 14:11:25 WARNING: Application.setConfig Application: myapp is in failed state as initialization failed.
java.lang.InstantiationException: Error loading web-app 'myapp-ws' at C:\apps\oc4j10131\j2ee\home\applications\myapp\myapp-ws:
Error processing webservices.xml : null^M
The [Loaded ...] messages are the result of Java's -verbose:class flag. I tried OC4J's debug flag "-verbosity 10" as described in the docs on
runtime debug flags but that does not produce any detailed messages. Are there some other flags to see why this won't deploy?
There's not much info in any of the app server log files. Environment is XP SP2, JDK 1.5, OC4J standlone 10.1.3.0. I tried re-assembling it using the WS assembler from 10.1.3.1 but that did not solve the problem.

O.K., figured this one out. In EA I had converted a panelPage element to a Page, but had not modified the backing bean code to set and get the new object type. EA didn't seem to mind, but 10.1.3 production picked it up. I'm guessing it has to do with the better integration among the various participants in a page that's part of the production release (and also makes the removal of page components much cleaner).
On to the next!
JLL

LiquidData SP2 Web Services

Similar Messages

Maybe you are looking for