Liquify Filter shows transparency instead of increasing/decreasing the object

I have been watching a tutorial concerning the Liquify Filter and have followed all the steps, but apparently I am not doing it correctly.
I did turn my layers into a smart object, but when I use the pucker/bloat tool on an eye for example, it only creates the transparency of the picture.
Strangely enough, I can use all the other tools without having any problems.
Does someone knows how to fix this problem?
Thank you in advance for your replies!

Hi All,
Here are the steps i did for the currency conversion.
1. Created the conversion type.
2. Exchange rate type -> M
3. Selected Dynamic exchange rate
4. In the currency tab selected source currency from data records.
5. Target currency i selected Target currency from variable.
6. Variable is the one created on the 0CURRENCY object.
7. Time reference is the exact day and 0CALDAY is selected in it.
8. In the query, created a calculated key figure and assigned this conversion type to the CKF.
9. I have just dragged the 0CURRENCY in the row.
10. For currency in the Advanced tab in query i selected master data option for the filter.
When the query executes, it asks for the value of this variable.
When i select the F4, it should show me all the currency values, but it shows me only INR. In the search if i give EUR manually then it takes EUR but doesnt show me in the list.
Is there any step that i have missed out pls.
Regards,
Charu
Edited by: Charu Pandey on Jun 18, 2009 6:02 PM

Similar Messages

Volume buttons on side are not increasing/decreasing the volume on my iphonr

The volume buttons on side of iPhone are not increasing/decreasing the volume on the iPhone 4s

Hello Chloelovescole,
I'm sorry to hear you are having these issues with your iPad. If you are having issues with the side buttons either not responding or appearing to be stuck in a pressed state, you may find the information and troubleshooting steps outlined in the following article, up to and including contacting Apple Support for service if necessary:
Get help with buttons and switches on your iPhone, iPad, or iPod touch - Apple Support
Sincerely,
- Brenden

I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?

I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

Audigy 4 Pro - Trouble increasing/decreasing the volume using remote (RM 1500)

NAudigy 4 Pro - Trouble increasing/decreasing the volume using remote (RM 500) As the title says, I'm having troubles with increasing/decreasing the sound volume using the remote controller unit - RM 500 on my Audigy 4 Pro.
The sound volume inc/dec works just fine if I do it via the keyboard buttons, Audigy's External Hub or any other "software method", except when i'm using the remote.
If i press + or - on the remote, only the left channel reacts.
I'm using the latest drivers/apps (via AutoUpdate) over a fresh Win XP Pro / Audigy drivers (from the original CD).
It does not have this strange behavior with the drivers/apps from the original CD, but only after installing the updated drivers. The reason i'm not keeping the original drivers is that a few years ago, when the original CD drivers were the only ones available, they caused the BSOD to my ex-system several times. It was something related to the fact I was using (and I still am) 4 DDR memory bars...
I would really need some help on fixing this issue.
Thanks in advance!

R Thanks for the fast answer Loi.
I downloaded the "ECUP_XPPCAPPBETA_US_3_40_2.exe" file but at installation start it gives me the message:
"Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this Setup program. Setup will exit."
PS: I just tried to install this beta app over the one i already have installed.

Photoshop cs5 liquify filter shows no effect until after clicking OK

I"m using photoshop cs5 and the liquify filter dosen't show any effect until after I've clicked ok. I've checked, and unchecked "show backdrop" and the opacity is set to 100%. I'm stumped.

I solved my own problem. I reset my preferences by closing photoshop, then re-starting the program while holding ctrl-alt-shift. I then unchecked "show backdrop."

Is it possible to increase/decrease the number of sort columns in Advanced Sort dialog?

I am using Panel Collection and a Table. When I visit View->Sort->Advanced, I get Advanced Sort dialog with 3 column choices. Is there any setting exists which will allow you to increase/decrease number of columns presented for sorting?

Hi,
this cannot be changed and always is 3
Frank

Samsung Serie 7 ultra: 3D Features not working, Liquify Filter shows black screen

My System: Win 8, AMD Radeon HD 8500m, Photoshop CC
Is it a driver problem? Anyone having same issues?

I do not see the 8500m listed as being tested even. Must be a new mobile chip for low power..
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB of VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows & Mac OS)
AMD/ATI Radeon 2000, 3000, 4000, 5000, 6000, 7000 series
AMD/ATI FirePro 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900
AMD/ATI FireGL W5000, W7000, W8000
Intel Intel HD Graphics, Intel HD Graphics P3000, Intel HD Graphics P4000, Intel(R) HD Graphics P4600/P4700
Note: ATI X1000 series and nVidia 7000 series cards are no longer being tested and are not officially supported in Photoshop CS6. However, some basic GL functionality can be available for both these cards.

How we can increase/ decrease the width of a HTML Region.

Hi,
I am having following 2 HTML regions defined.
I am using Two Level Tabs with Sidebar
Region1
Type - HTML Text
Template - Report region with 100% width
sequence - 10
column - 2Region2
Type - HTML Text
Template - Report region with 100% width
sequence - 10
column - 3 // only the column is different in this caseNow when I run the page, what I found that Region1 width is covering 75% of the Page and Region2 is covering only 5-10% of the page (right side)
How can I reduce the width for region1 and increase the width of region2.
Thanks,
Deepak

Deepak,
This is typically done via CSS adjustments. Solutions are always very specific to the application. i'd be happy to take a look if you would please put an example up on apex.oracle.com. Provide the workspace/username/password. You can create a new account for this purpose.
Regards,
Dan
Blog: http://DanielMcGhan.us/
Work: http://SkillBuilders.com/

I need another way of increasing/decreasing the volume in OS X.

Long story short: The F11 and F12 volume keys on my Apple keyboard change the volume in too large of steps. There's a key combination for tiny increments, but come on... Do I really want to use two hands to press three keys just to turn up the sound a bit?
F12 turns the sound up in big increments.
ShiftOptionF12 turns the sound up in tiny increments.
My thought was to use the function keys as standard function keys (keyboard prefs option) and then use hotkey software to make F12 trigger fnShift+OptionF12. That failed because, apparently, it's impossible to create a hotkey macro that includes using the fn key. Garr!
This made me realize there must be another way to create a hotkey that turns the volume up just a little. I've tried using an applescript, but applescripts and hotkeys are apparently buggy (click the key too quickly or too lightly and you can get a loop where the Applescript executes a billion times because it thinks the key is being held down... which means the volume won't stop rapidly turning up!!!) Keyboard Maestro and Spark both seem to have this problem.
SO....
I'm trying to find creative ways to create an F12 hotkey that turns the volume up a little. And then, obviously, I'll do the same thing with F11 to turn the volume down a little.
How many ways are there to turn the volume up in small increments?
ShiftOptionF12.
Applescript.
...can you think of any others?
Are there any other key combinations? Lesser known key combinations maybe? Something else entirely?

I already own an Apogee Duet, which, among other things, serves as an amazing volume knob, but since my hands are on the keyboard already typing, I'm hoping to fix the volume keys that turn up/down too quickly unless I use two hands and three keys. No thanks.
I'm convinced there's a way to make an F12 hotkey that turns the volume up just a little instead of a full five steps. I have hotkey software (Keyboard Maestro and Spark). I'm just missing the solution that'll make it work. If I could use the fn key in a macro, this would be easy. That's why I'm seeking creative solutions I haven't thought of or that I'm just unaware of.

Increase / decrease the space before / after a table -

Hi all,
I have not found any shortcuts which, after you select a table, modify the space before or after.
Does anyone have an idea? Otherwise, an early idea for a [JS]?
Thank you in advance!

According to the instruction, I closed InDesign and re opened it then immediately hold down Ctrl+Alt+Shift, but there is no dialog window pop up. I did this a few times.
Then I tried to do it manually by deleting InDesign Defaults and InDesign SavedData. But in the folder (Windows XP: C:\Documents and Settings\<USER>\Application Data\Adobe\InDesign\<Version #>\<language>\ ) I can see InDesign Defaults but no InDesign SavedData. I deleted InDesign Defaults anyway, re opened InDesign, nothing changed.

Liquify Filter causing semi-transparent layers to become brightened

Hi,
I'm having an issue with the Liquify Filter's final results. When using the filter it works fine, and if I use the filter on a solid layer its results given back to the original image are perfect also.
However, using the filter on a layer that has mostly transparency behind it (a layer with sketched line-art on it for example), the result given back to the original image is brightened significantly. The only work-around I have found so far is to merge a solid colour background to the transparent layer, and then the result works fine. However this is not desirable because future use of the image as line-art requires editing to get it back onto its own layer that can be destructive when the work contains tonning.
Is there any fix for this?
Thanks,
- Ricky

I have encountered the same problem with brightening of mostly transparent layers when using Liquify.
I'm using the latest version of Photoshop-CS6 on an HP Pavillion p6 series that came installed with Windows 8.

Photoshop Liquify Brush Size increase/decrease with alt+crtl drag don't work anymore...

Hi :-)
I have installed the last Update to Photoshop CS6 13.0.4...
Now I can't increase/decrease the Brush Size in the Liquify-Dialog anymore (before I installed the update, it works fine with alt+crtl and drag)...
If I press alt+crtl, the "Cancel"-Button is shown as "Revert", but the Brush resizing don't work... :-/
I use a Mac on OS X 10.6.8...
But it seems it has to do with the system... beacause at home I use 10.8.3 and there works everything fine with the 13.0.4 Update!!!

Files has been uploaded here:
http://soloporhoy.1free.ws/test/soluperguei/index.php

Using Windows 7 and LR 5 when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showi

Using Windows 7 and LR 5, when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showing pictures that do not match the query

Dan,
Here's what's going on in the catalog you sent me, "Joel & Caitlin's Wedding". There is the keyword "gwenn", which is explicitly assigned to 7 pics. But keyword "schwartz" has a number of synonyms, including "gwenn", and it is assigned to 25 pics. There is no overlap between the two sets of pics.
I discovered these two occurrences by doing Metadata > Export Keywords, opening the exported file in an editor, and then searching for "gwenn". I found two occurrences of "gwenn":
gwenn
schwartz
{gwenn}
From this, you can see that the keyword "schwartz" has 9 synonyms, of which "gwenn" is one.
The filter criterion "Keywords Contain gwenn" will match the 7 pics that are explicitly assigned the keyword "gwenn", and it will also match the 25 pics assigned the keyword "schwartz", because that keyword has a synonym "gwenn".
This illustrates the behavior I mentioned above: The criterion "Keywords contains x" will match against any of a pic's assigned keywords, any of those keywords' ancestor keywords, and any of the synonyms of the assigned keywords and their ancestors.
So LR is operating correctly here, if not in a way that's easy to understand.
It appears that you are using the synonyms of "schwartz" to represent individual members of the Schwartz family. A better way of representing family relationships is to have a parent keyword "Schwartz", with subkeywords for each family member, e.g. "Gwenn Schwartz", "Joe Schwartz", "Jane Schwartz", etc. Repeating the family name in the subkeywords has a couple of advantages. LR usually only displays the "leaf" name of a keyword, so instead of showing you just "Joe", it will show you "Joe Schwartz", helpful when there are a number of different people whose first name is "Joe". Also, if you ever export your pics to other software, it may not understand the LR hierarchy and won't show the parent keywords, so again it's more informative to see a keyword named "Joe Schwartz" rather than "Joe".

I can't view video on imported clips on FCPX, it shows blue instead of image

I can't view video on my imported clips on FCPX, it shows blue instead of image on the clip. I can hear sound but no video. What is the problem. I wish someone can help me on this issue? Thanks.

The camera is Sony Handycam HDR-CX550. I used the internal hard disc to record. I can's use MTS clips if it is recorded on the internal hard disc. I converted clips into MOV, MP4, and Final Cut formats, non of them worked on Final Cut Pro X. I tried to import the same clips on iMovie, it worked but super slow. MOV and MP4 formats used to work for FCPX, the only difference is I recorded the footage with HD 1920x1080.
The clip I imported showed as a blue thing with two rectagle shapes on it. I can hear the sound, but no video. I also imported my old clips with sam format, it worked. I tried a lot of things, no use.
By the way, what is spwecs?

Is it possible to increase/decrease pages based on a number selected from a dropdown?

I need to the end user to fill out information on between 1 and 5 properties. Is it possible to increase/decrease the number of identical forms pages based on a dropdown from page one? For example, if the local property manager decides there are 3 competing properties being developed, they will select 3 from a dropdown on the first page and three identical pages will be generated.
Thanks

This might be usuful to you : http://forums.adobe.com/message/5638520
See this example : https://adobeformscentral.com/?f=dCixP9gCn9BlK72%2AKla92w
Gen

Liquify Filter shows transparency instead of increasing/decreasing the object

Similar Messages

Maybe you are looking for