Liquify preview has stopped working in CS

Hello,
I've searched around for an answer to this, but a question for the same problem doesn't seem to have been asked anywhere that I've found, so I hope someone here might know.
I am running CS on Windows XP. I previously used the Liquify filter on a large picture with no problems. Now I want to do a new one, but the preview of Liquify won't work - the picture comes up, but I can't see the real-time changes. When I hit OK the changes show up on the picture, but since I couldn't see what I was doing, they're not what I want.
I have found where someone has had this problem, but it seems like they always had it and was never able to see the preview, which isn't the case here. I have tried updating my video driver, like someone advised in that case, but it did nothing. I made no changes to the computer's hardware since it last worked (May). I have also tried using a small file to see if it was the size of the file, but the preview didn't work then either.
I have an external drive where my file resides, with 74.5 GB free. 12.5 GB is free on my internal HD, which is where Photoshop is installed. 931 MB RAM. Since it worked before, I'm hoping it's something like clearing up more memory space on my HD...
Thanks in advance for any help you can give!
Amanda

Thanks! I did reset all the tools and preferences once, but not deleting the entire file.
Okay, so I tried deleting the preference file and everything was reset. I opened the image in question and went straight to Liquify. It still won't change the preview image, but if I turn off the image and look at the mesh I can see the changes to the mesh itself as I make them. So I can do a sort of work-around that way, but I wonder why the image itself still won't warp.
Out of curiosity I opened a smaller JPG instead of the multi-layer PSD file I was working on and tried to Liquify that again. The same thing there - I could reduce the opacity of the backdrop and see the warped mesh behind it, but the image itself didn't change till I hit OK.
Thanks,
Amanda

Similar Messages

Finding text in a PDF using preview has stopped working (correctly)

Finding text in a PDF using preview has stopped working (correctly).
When I search for certain words in a PDF using preview, it correctly finds all the pages in the document with that word. However, it no longer highlights the word being searched for. I have looked through the various settings and cannot figure out how to turn this back on.
Thanks.

4Shared worked, but having to register to retrieve files from there is a nuisance.
The problem is that you use special graphic state operators inside text objects which is not allowed:
BT
/printmatic_F1 58.133398014634 Tf
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 86.448306387737 264.65046258267 cm
(t) Tj
Q
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 102.60939103581 264.65046258267 cm
(e) Tj
Q
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 134.93156033194 264.65046258267 cm
(x) Tj
Q
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 163.99825933926 264.65046258267 cm
(t) Tj
Q
ET
Have a look at the PDF specification ISO 32000-1:2008 (e.g. at http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/PDF32000_2008.pdf). Table 51 shows that q, Q, and cm are special graphics state operators, and Figure 9 illustrates that these operators, therefore, are not allowed in text objects, i.e. between BT and ET.

Liquify tool has stopped working in CS6 Extended after Windows 8.1 upgrade

My liquify tool in CS^ Extended has stopped working after upgrading my operating system to Windows 8.1. It was fin in Windows 8.0. Suggestions on how to fix this please.

This is not a proper solution (as it would cost you the GPU dependent features like Rotate View Tool etc.) but it does indicate that you may have to update your GPU driver from the GPU maker’s site.

HP printer has stopped working - Laserjet p1006

I just installed Windows® 8 Consumer Preview and my HP printer has stopped working. I am using the Laserjet p1006 and I have tried everything, reinstalling the printer, re-downloading drivers etc. but to no avail. Are there new drivers available that work with Windows 8?
Update:
The printer is installed and driver has been picked up by Windows but every time I try and print something, it gives me an error that the document could not be printed.
Any suggestions

Really Thanks God
i Found solution of this problem Randomly only by praying
The solution
Connect The p1005 printer to a pc have windows 7 and print a page with it and get the cable connected to windows 8 after that and go to control panel > hardware and sounds > Device and printer > hp laser jet p1005 Right click > Printer properties > ports > uncheck bidirectional support then press ok and print ,, it works
Note : after doing the pervious steps if u turned the printer off u will need to connect it to windows 7 pc again and print and connect it to windows 8 it will work without the pervious steps //
it seems like if windows 7 gives it information that is reseted after turn it off
we wish windows 8 to solve this problem nearly
That is the Original post page : http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/laserjet-p1005-will-not-print/34...

How fix "Adobe Photoshop CS6 has stopped working" error in Win7?

Hi All,
I’m getting the following error message when ever I try to use Move Tool and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Video card driver is updated.
Please see the following error event.
Faulting application name: Photoshop.exe, version: 13.0.0.0, time stamp: 0x4f61c045
Faulting module name: aticfx64.dll, version: 8.17.10.1047, time stamp: 0x4cabd6c0
Exception code: 0xc0000005
Fault offset: 0x000000000002f5bf
Faulting process id: 0x15ac
Faulting application start time: 0x01ce2110508d2fb6
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
Faulting module path: C:\Windows\system32\aticfx64.dll
Report Id: fe57fe44-8d03-11e2-bd6c-dc0ea14b01df
Please advise what is the problem? and How to sort this out
Your help is highly appreciated.
regards

that's the details it shows.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2527 MHz
Built-in memory: 3891 MB
Free memory: 1350 MB
Memory available to Photoshop: 3306 MB
Memory used by Photoshop: 5 %
Image tile size: 128K
Image cache levels: 4
Photoshop crashed on 15/03/2013 at 00:05:05 (GetImageViewResourceSharingGLContext)
The GPU Sniffer crashed on 15/03/2013 at 00:50:52
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
No video card detected
Serial number: 92628701192123445467
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Khan\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 298.1G, 254.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Embed Watermark 4.0
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mezzotint 13.0
   MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Sumi-e 13.0
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   Underpainting 13.0
   Vanishing Point 13.0
   Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Elements 8.0 has stopped working and closes

In the video effect panel, the simple act of scrolling down freezes de app and the message
Elements 8.0 has stopped working appers and windows closes the app.
event viewer
Faulting application name: Adobe Premiere Elements.exe, version: 8.0.0.0, time stamp: 0x4aa5c87c
Faulting module name: nvSCPAPI.dll_unloaded, version: 0.0.0.0, time stamp: 0x4a891469
Exception code: 0xc0000005
Fault offset: 0x37b75ce4
Faulting process id: 0x15c8
Faulting application start time: 0x01ca6ac334f177cc
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Elements 8.0\Adobe Premiere Elements.exe
Faulting module path: nvSCPAPI.dll
Report Id: d3c67914-d6b7-11de-aed1-001a4d9b019b
There is a message at the lower left coner saying display performance will be poor due to incorrect operating graphics card or driver!
This message is always there.
The problems happens with all project with Apple MOV file from my Canon SD780 a 720 30 frame H.264 file
With a project empty (no clips) imported the problem does not happens. As soon as you import a file the error happens.
This is a brand new W7 install 2 HD SATA separate from the DVD IDE channel.
Swapp file also separate in the second HD.
The videos were imported from the folder since i already had the files before i bought Elements
The preview of the mov files (just open the file without any editing) in Elements is very choppy. In Windows (in QuickTime) it is perfect and uses only 35% of CPU
Latest driver applied and KB kb402534 followed
[Display]
Processor:        AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2612 MHz)
Operating System:    Windows 7 Professional, 32-bit
DirectX version:    11.0
GPU processor:        GeForce 8500 GT
Driver version:        191.07
Stream processors:    16
Core clock:        500 MHz
Shader clock:        918 MHz
Memory clock:        400 MHz (800 MHz data rate)
Memory interface:    128-bit
Total available graphics memory:    1023 MB
Dedicated video memory:    256 MB
System video memory:    0 MB
Shared system memory:    767 MB
Video BIOS version:    60.86.34.00.13
IRQ:            16
Bus:            PCI Express x16
[Components]
nvCpl.cpl        2.7.170.15        NVIDIA Control Panel Applet
nvCplUI.exe        2.7.170.15        NVIDIA Control Panel
nvWSS.dll        8.16.11.9107        NVIDIA Workstation Server
nvViTvS.dll        8.16.11.9107        NVIDIA Video and TV Server
NVSTVIEW.EXE        7.16.11.9062        NVIDIA GeForce 3D Vision
NVSTTEST.EXE        7.16.11.9062        NVIDIA 3D Vision Test Application
NVSTRES.DLL        7.16.11.9062        NVIDIA 3D Vision Module (4512197)
NVMCTRAY.DLL        8.16.11.9107        NVIDIA Media Center Library
nvDispS.dll        8.16.11.9107        NVIDIA Display Server
NVCPL.DLL        8.16.11.9107        NVIDIA Compatible Windows7 Display driver, Version 191.07
NVCUDA.DLL        8.16.11.9107        NVIDIA CUDA 2.3 driver
nvGameS.dll        8.16.11.9107        NVIDIA 3D Settings Server
Any solution?
thanks

With the new nVidia drivers, the first thing that you will want to do will be to go to the nVidia console and disable 3D Sterevision. No Adobe program can use it. It is designed for gamers with the 3D Stereovision goggles.
If that does not fix things, go back to the console and disable PhysX. It too is a gamer module.
Good luck,
Hunt

Windows message that reads APE's has stopped working

I have a new Sony Vaio and Premiere Elements 4 was preinstalled when I bought it. I'm now trying to create a movie and I've never used PE before, I can add various clips into the sceneline as well as titles, but when I go to preview my video in the preview screen it plays about 10 secs of a clip before just closing the whole program down and coming up with a Windows message that reads
"Adobe Premiere Elements.exe has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I haven't had a solution! Please help, its really frustrating, I just want to get started with my movie and I can't.
Thanks
Gemma

You don't say what operating system you're using, what your system specs are or, most importantly of all, what type of camcorder your video came frame, but all of these things can affect the program's performance.
Another large factor is outdated firmware and, especially, outdated Quicktime.
Because there are so many possibilities, I'd recommend you contact Adobe Tech Support and do some troubleshooting with them.
http://www.adobeforums.com/webx/.3bbe7d56

99 or 100% when it says Premiere Pro has stopped working and needs to close. What's going on?

I am using the premiere pro trial at the moment and have been trying to render a video for a solid week now. My computer is far more powerful then the recommended specs and yet it still takes 2 hours to attempt to export a 3 minute video (that isn't even heavily edited) and not only that but it will get to 99 or 100% when it says Premiere Pro has stopped working and needs to close. I have used earlier versions of the product before and never had such problems, even my 2 year old laptop could breeze exporting. What's going on?

Thanks, I'm a bit new to asking for help!
Version : Premiere Pro CC 2014.2 (8.2)
It is up to date
I'm using Windows 8.1 build 9600
My sources are contained in .mov, .mp4 and .png. The codec I'm trying to use is H.264
After I set the project to export I got this error message every time it gets to either '99' or '100%' completed. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
I have never had such a problem with the program which makes me think it might have something to do with a recent update.
No other notable software was running during the export.
I don't have any third-party effects or codecs installed.
I have 64 bit OS and processor, Intel i5 - 4670K quad core clocked at 3.40 GHz. 12 GB of RAM. And a GTX 770 with 2GB of video RAM.
Unless it was installed in the trial, I do not have the Mercury Playback Engine.
And finally, it can be noticeably choppy during the preview when it gets to the part I don't have rendered but is fine again for a bit if I replay those parts. A part from being a bit slower then usual, I didn't actually run into a major problem until I started exporting.
Thank you for the help! Any suggestions?

My Premiere Elements 7 says it has stopped working when it was a day ago?

About 2 days ago the program was working fine and i edited a video about half way... and then today when i wanted to edit it a box pops up saying adobe premiere is running out of system memory when there is about no space taking up on the computer and only 2 other videos edited besides the one im working on...and after the system memory box pops up it says that adobe premiere has stopped working....and then looks for a problem and shuts off... any help???

Fred,
Consider this a little back seat driving.
What is the operating system of your computer? Is it Windows XP or Windows Vista or the new Windows 7? Is it 32 bit or the newer 64 bit type? Have you looked at the system requirements in the FAQ section of this forum (to the right of the user questions)?
As for getting at which drives the computer has, maybe try this:
Can you get to the Disc Defragmenter of the computer? It is usually found in Windows XP, Start/Programs/Accessories/System Tools/Disc Defragmenter. Open that and look to see what it lists for drives and each drives Capacity and Free Space. Besides a C drive, do you see any external hard drives?
Next, Start/Program/Accessories/System Tools/System Informaton, scroll down the list. What does it say for Total Physical Memory and Available Physical Memory.
Do you know about the Task Manager Performance as a tool for evaluating computer memory needs? If not, once we know your computer operating system, we can direct you to the appropriate how to links.
There are all sorts of possibilities here from preview files piling up in the local drive, not enough computer resources in the first place, source and format of video, and so on. When did you defragment your computer last?
Maybe lets start here and see where that leads along with SG's questions & answers.
ATR

PDF thumbnail generation has stopped working

Hello Together,
formerly I was using Adobe Reader X at an actual Patch Level on a 64 Bit Windows 7 system. At that time PDF thumbnails were no subject for me. Now I've upgraded to Adobe Acrobat X Pro and uninstalled Adobe Reader X. Then I wanted to use the thumbnails. That was no problem as I found a link to a tool which fixed my issue: http://forums.adobe.com/thread/305220
Everything worked fine for me, until I noticed that one of my applications needed an installed Adobe Reader to work properly. So I reinstalled the Adobe Reader on my system again. This caused to stop the thumbnail generation: PDF files which existed prior to the Adobe Reader installation still have a thumbmail icon preview, but those who were generated after the installation still appear as a PDF icon.
Before installation the fix from thread 305220 my workaround was to open Acrobat X, the navigate to the open dialog, moving to the folder with the PDFs within and wait that Acrobat finished the thumbnail generation. But this workaround now is out of service, too. So my assumption is, that reinstalling Adobe Reader screwed up something in my Adobe installation which I cannot find at the moment which has nothing to do with the initial problem with displaying thumbnails.
Performing some repair installation didn't help:
   (1) repair Adobe Reader, then repair Adobe Acrobat --> no change
   (2) repair Adobe Acrobat, then repair Adobe Reader --> no change
   (3) repair Adobe Reader only --> no change
   (4) repair Adobe Acrobat only --> no change
   (1), then apply fix from thread 305220 --> no change
   (2), then apply fix from thread 305220 --> no change
   (3), then apply fix from thread 305220 --> no change
   (4), then apply fix from thread 305220 --> no change
   apply fix from thread 305220, then (1) --> no change
   apply fix from thread 305220, then (2) --> no change
   apply fix from thread 305220, then (3) --> no change
   apply fix from thread 305220, then (4) --> no change
I hope, that I'm not the only one who got this problem and, hopefully, someone found a solution for this.
Regards
   TheCuriousOne

Loreto María wrote:
My IPod nano 2nd Generation, has stopped working, it gets frozen and I get a message telling to go to "www.apple.com/support" but I cannot get any support there, anyone knows if It can be repaied. Thanks a lot in advance. Regards. Loreto
Why not?
Did you at least download & read the user manual?
You can always call Apple Care if you are still under warranty. Otherwise, take your iPod to an Apple Store or an AASP.

HP G4050 "HP Scan Resources has stopped working" and the program closes

Scanning photo negatives, and all was working well until I updated the HP software.
RUnning on an HP laptop, 64 bit, Win 8.1 64 bit, most current version of scanner software (is there no way on the software to find the version no.? I deleted the download after installing)
Have rebooted the machine. Closed the scanner, turned off/on, reinstalled software and all combinations of these three.
load the negs. preview. rotate, crop, click "finish". It scans the first neg, gets 95% of the way (according to the work bar progress), throws up a message:
"HP Scan Resources has stopped working" Close the program. On the close screen it suggests the above 3 retrys, and gives the "extended error info" as :
8,[(4,0,-2147023170)] I presume that may mean something to someone.
Am about 1/2 way through scanning 5,000 negatives, and this has cropped up. Bizarre, as the laptop has not changed from the get-go (new HP laptop). WhaddaIdo?

Hello WRJP, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into scan issues. I would like to help.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Preview has stopped responding

preview has stopped responding, menu items will open with right clicking, cannot access preferences, cannot find plist preferences file to delete it, have done repair disk permissions, now at a loss.
John

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
As Guest, test. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

Preview has stopped responding to clicks

Preview has stopped responding to clicks and now only scrolling and hotkeys work. I already tried resetting the preferences and restarting. Once in Preview I can't click on any system menus. The only way to switch is using 4-finger swipe to mission control and switching apps. Restarting doesn't fix it. Any ideas?

If the issue is limited to your user account Did have you try try starting up in Safe Mode and test.
(It will take more time to startup in Safe Mode because it runs a directory check.)
If your apps functions correctly that way, go to System Preferences > Users & Groups > Login Items, and remove them. Boot normally and test. If not Copy & paste this is your "Go" menu hold the option key and choose Library
Then go to/Contextual Menu Items and move whatever is there to the Desktop. Then do the same with /Library/Contextual Menu Items. Lastly, moveUsers/yourname/Library/Fonts to your desktop and restarting*
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
* Use your Finder "Go" menu holding the option key to choose "Library"

My Canon Pixma iP8500 printer has stopped working with Mavericks

Hi, my Canon Pixma iP8500 printer has stopped working in the past few days and I made no alterations that could explain why this might happen. I am using OS X 10.9.5 Mavericks on a Mac Pro desktop computer. I can print a test page when selecting it on my Canon Printer Utility from my desktop so it seems that there is contact between the computer and the printer but it will not print from iPhoto, Preview or Mail. When I select Print from any of these nothing happens and there is nothing on the Print List. I have checked the Printers & Scanners in my System Preferences and my Canon iP8500 is listed and highlighted as Idle Default and Share this printer is ticked. I have tried deleting this printer then adding it but it still will not print. I would appreciate any helpful suggestions bearing in mind that I am fairly elderly and have a limited knowledge of IT and some of the terminology.
Thank you,
Colin.

Hi, might try this...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Itunes wont open and gives me a message saying "Itunes has stopped working". What can I do to fix this?

I use windows vista and I have upgraded my itunes. Now when I open it, it gives me a message saying "itunes has stopped working" and then gives me a message saying it will notify me for a solution. What can I do to fix this so it can open and not give me any more problems???

First you can try;
Try restarting PC and run itunes again!
If error again than perform clean instal of itunes (uninstal first and than instal again)!

Liquify preview has stopped working in CS

Similar Messages

Maybe you are looking for