Liquify tool not working so well in the free trial...

I just recentley downloaded the free trial for Adobe Photoshop. When I went into liquify everything was fine except for the picture. It was kind of inverted (mostly bright blue and barely being able to see what the picture is). It also looked like the same picture was behind it and normal. After a while of looking around in photoshop I saw that after making some changes using the liquify tool on the inverted picture the changes still appeared in the normal picture. If anyone knows what's going on could you please tell me? I just started using photoshop so im new to this stuff. Thanks!

Curt nailed it. Your video card (GPU) manufacturers website will have the very latest video card driver for your system. Download and run the installer.

Similar Messages

  • I cannot open more than 1 Tab per window. The "+" does not work as well as the item "New Tab" from the File drop-down menu. What shall I do ?

    I have just removed FireFox and reinstalled it again on my Mac Book PRO.
    When I open FIreFox I canNOT open more than 1 TAB.
    I click on the "+"on the top line of the window. It should open another TAB but id does NOT.
    I click on the File item in the top menu bar. A drop-down menu pops up. I click on "New Tab" and nothing happens.
    How can I get more than 1 Tab on the same window ?
    This feature works with Safari !
    Thank you so much.
    Best regards

    We have seen reports about a Community Toolbar extension causing this issue with not being able to open a new tab.
    So if you have such a toolbar then start with disabling it.
    *Tools > Add-ons > Extensions
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Lift and Stamp tool not working so well? White images!?

    Here's a strange issue.
    I worked on an image yesterday. Today, I want to copy the adjustments to another image in the same project. When I use the Lift and Stamp tool to copy the adjustments, the new image turns completely white. Even though I checked the adjustments and they look the same as the original one, the new image is all white.
    Now the strange thing is when I adjusted another image today then used the Lift and Stamp tool, the adjustments copied over fine.
    The only thing I can see which is different from the image I adjusted yesterday is that I had Aperture send that image to CS4 and I edited a TIFF which I stacked back with the original file.
    I'll try to make a screencast available so you can see what's going on.
    Looks like Apple's going to need to update Aperture 3 before it really comes out.
    Antonio

    Thanks for your effort. I am stunned. Would be edifying to know what is happening! I thought it might be okay as I sometimes turn my image black after applying some change, but the black is only a temporary display problem as the image is correct the next time I go to use it; perhaps in my situation Aperture was busy generating new previews for presentation of the changes. Your white is certainly a different issue. Glad it's only an isolated incident and not happening for you on the other images.

  • Liquify Tool Not Working at all!?

    I am new to photoshop but I can't find anyone else with this problem...Liquify doesn't work at all. It literally does nothing no matter what settings I try!
    I have a mac, all of my software is updated
    The brush pressure option is locked and it is set to 1?

    Good day!
    Please read:
    http://forums.adobe.com/message/4587299#4587299
    Could you please post a screenshot to illustrate the issue?
    Does the dialog open at all?
    Regards,
    Pfaffenbichler

  • Liquify Tool Not Working

    I have Photoshop CS6 Extended. I just want to do something like this. http://prntscr.com/2tk258
    However, when I swipe across the text, NOTHING happens. I've been tearing my hair out for the past hour trying to find a reason and I am not able to. Here is a screenshot of my settings. http://prntscr.com/2tk2ab

    Hi, Tommy, thanks for sharing the screenshots, I was able to see immediately the problem: you do have show backdrop checked, with in front at 100% opacity.
    Uncheck it, or lower the opacity to see your modified image. It is a setting that is used when one wants to match the liquify job to the background, but with 100% opacity of a copy of the background placed in front, you do not see your work!

  • At times the back/forward button not working as well ast the refresh button. Have to restart Firefox to get them working. Fix?

    This has just started happening in the last few days.

    This can be a problem with the file places.sqlite that stores the bookmarks and the history.
    See http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • My mac won't restart, shut down, or go to sleep. And the volume and brightness does not work as well.

    My mac won't restart, shut down, or go to sleep. And the volume and brightness does not work as well.

    Connect the computer to the power.
    Hold the power button down for 10 seconds or more.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

    Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
    -CharlieH23

    Copy and paste only this area, you may have to scroll down.
    Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 2494 MHz
    Built-in memory: 6019 MB
    Free memory: 3360 MB
    Memory available to Photoshop: 5227 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenCL Version: 1.2
    OpenGL Version: 2.1
    Video Rect Texture Size: 16384
    OpenGL Memory: 2112 MB
    Video Card Vendor: Intel
    Video Card Renderer: Intel(R) HD Graphics 4000
    Display: 1
    Display Bounds: top=0, left=0, bottom=768, right=1366
    Video Card Number: 1
    Video Card: Intel(R) HD Graphics 4000
    Driver Version: 10.18.10.3958
    Driver Date: 20140930000000.000000-000
    Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
    Video Mode: 1366 x 768 x 4294967296 colors
    Video Card Caption: Intel(R) HD Graphics 4000
    Video Card Memory: 2112 MB

  • I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it. I've tried restoring it and restarting it but nothing seems to work.

    I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it and I can not get out of the home screen. I've tried restoring it and restarting it but nothing seems to work. I've tried everything, is there anything I can do myself to fix it?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Creative cloud photoshop blur tool not work as it should be

    creative cloud photoshop blur tool not work as it should be !
    I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
    and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
    I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
    at least it not bluring enough to see any major changes.
    the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
    (note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
    just need advise not to share system specs.
    and thats what this forums board is for getting advice and read what others say about the issue at hand.
    it's not to post or share system specs  !!!
    so with that out of the way I need advice only please ?

    Hi,
    It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
    If you zoom to 100% do you see any change when using the blur tool?
    What are the pixel dimensions of the image?
    (Image>Image Size)
    If you try a small image, does the blur tool work?
    What about when you use the mouse instead of your tablet?
    Can you at least tell us what operating system and version of photoshop your using?

  • CS5 Refine Edges tool not working how its suppose to

    Hello everyone - well I like the title says refine edges tool not working right -
    I open an image in photoshop - make a quick selection of a part of the image and then go into refine edges - Click on smart radious and when I use the brush to get a better selection that part becomes transparent - I tried seaching everywhere for an answer but noone seems to know
    Thank you

    Could you please post a screenshot with the pertinent Panels visible?
    The videos you might have seen might simply be using images that lend themselves to the task better than your image.

  • Adobe XI - Hightlight text tool not working

    Just downloaded adobe XI and the hightlight text tool not working.  How can I get this to work.

    I guess you can always use the box tool in drawing markups to draw a box around the text then play with the colors until you get close to what you want.
    The only thing I don't like about that (besides it being a PITA) is that it covers the text with color as well where the highlight tool does not.

  • Adobe photoshop tools not working on a Surface tablet randomly?

    I just installed CC Adobe photoshop on my Surface Pro 3 tablet and it has been nothing but frustration.   For reasons I cannot discern, the tools do not work on my image at random times.  I'll have smudges on one of the layers, and I choose the eraser tool and it won't erase anything in any layer.  I can't draw anything with a brush or pencil either.  In fact the tools stop working altogether. Yes the layer is active and visible, no it's not locked.  Very frustrating, and I'm at wits end. The only thing I've been able to do is save my work in stages, and go back to the previous stage if this happens. Is there a glitch on the Surface pro 3 with photoshop that causes it to not respond?

    I was having the same trouble, so i went to Adobe Help's Preferences > General Settings and switched to Display Local Help content only = Yes. As it says there, it disables the online links, but if you have an updated version of Help downloaded, it's easier and quicker anyway than the online system, and likely all you were needing anyway. You can always turn it back on later.
    Brad

  • Slider not working around 50% of the time.

    Hello,
    Slider not working around 50% of the time when I get a call. I hit the sleep button and home button several times and then it works.
    I've done the soft reset several times. I've restored settings completely 2 times.
    the screen is clean, my hands are clean, the wifi is off, the phone has not been dropped, it only happens when receiving a call and never happens when I'm just turing it on to access the menu. Bluetooth is off as well.
    Any ideas?

    this happened to me a week or so after buying my iPhone. Fixed it with a reboot... Simul holding home and on/off until apple appears on the screen . Been working for axweek ok now.

  • Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded." How can I repair?

    Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded."
    How can I fix it?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • How to control the finished goods that have already sold to customer

    Dear Gurus, I have a problem. In normal situation, SD process is....SO->DN->Post->Billing, after post the material, the goods won't exit in the plant anymore. But there is a special business mode..... After we sold to customer, and AR accounting docu

  • Dynamically embedded swf, has it ever worked

    I have to repost it. Wondering what adobe will say about it. I have tried this for a couple of days. I created a swf object in window.onload (also tried to create it directly while the script was loaded ), then call an AS function from JS. statically

  • Not allow user to change Vendor in MB1B(541 mov) in subcontracting process

    Hi all Im doing 541 mov type in mb1b wrt PO number, the vendor number is automatically fetching from PO but user can change the vendor there, I have to set display field as vendor,not allow to change vendor in MB1B..how can i set??? plz help me thank

  • Slide show widget

    Hi I do occassional updating for a rape crisis center. I know a little html and some css and am using CS4. I need to make a three picture slide show quickly and do not do flash. Are there any easy to learn widgets in CS4 or does anyone know a second

  • Equium L40-10X: Need details about memory

    I am thinking of upgrading the RAM memory on the above, but can't find the model or specification on the UK website (other members of the Equium family range are on the "Laptops" section of the webpage, but my model frustratingly is not!) - I am part