Lirc with xbmc -- Install lirc or use mceusb module?

About a year ago or so my remote worked fine with lirc installed from repositories. Then I had few problems with harddrive and didn't touch HTPC much.
Right now, with new harddrive in place, I reinstalled arch linux and xbmc and trying to get lirc working.. However it doesn't work the way it should.
The way I understand is that lirc conflicts with mceusb (I have latest Arch, installed from 2011.08.19 release). I am getting double keypresses with lircd started.
Should I use mceusb module? or should I use lirc? I am kind of confused.
Last edited by kdar (2012-01-21 19:10:27)

I just went through the trials and tribulations of setting Lirc up on my Zotac Nano AD10 (neat little device btw). The Arch wiki nicely states that most onboard IR receivers will work with the mceusb module. It works here.
Last edited by .:B:. (2012-01-21 22:18:03)

Similar Messages

When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.

When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.

The system on the original install dic is probably looking for the original video card.
It may be possible for someone with the right skills to make an install disc for you with the driver for your new card.
As I recall from my early days of being a Macuser, If you held down a key, (spacebar?), while starting it would open a dialog to take you through a monitor setup.

Error with quantity field:Datasource Creation Using Function Module method

Problem with DATASOURCE Creation using Function Module method :
I have created a datasource ZSTANDARD_COST_PRICE using Function Module method . The datasource creation is successfull when I remove the quantity field from the Z table . If I dont remove the quantity field from my Z table it gives an error as "Units Field WAERS for field STPRS of datasource ZSTANDARD_COST_PRICE is hidden". I am not able to remove this error . Please someone guide.
Let me know if my explanation is not clear enough.
Thanks in advance,
Neha.
Z table definition is as below :
MATNR MATNR CHAR 18 0 Material Number
BWKEY BWKEY CHAR 4 0 Valuation area
LFGJA LFGJA NUMC 4 0 Fiscal Year of Current Period
STPRS STPRS CURR 11 2 Standard Price " Here the currency field is WAERS and table T001
PEINH PEINH DEC 5 0 Price Unit
VJSTP VJSTP CURR 11 2 Standard price in previous year
VJPEI VJPEI DEC 5 0 Price unit of previous year.
Edited by: Neha Rathi on Jan 30, 2009 3:03 PM

Hi,
You should add it as one of the main fields as you have added other fields and not as the currency fields...that is..it should be part of the data source and you should be able to see it in RSO2...
Also if added as i said then it will come as new field in the data source...you can either let it be there...or hide it..
also if you want to populate it then you will have to write the code for this fields as well.
Thanks
Ajeet

How to install Muti_node R12 using VMWARE

Hi,
Any one have experience on R12 with Linux installing multi node using vmware ,Please let me know, i know single node installation on VMWARE WORK STATION,
Thanks

I got this multi node installation procedure from blog,
http://skrajend.blogspot.com/2007_06_01_archive.html
R12 MultiNode Installation with VMWare
Have only one node , don't worry still you can have enjoy R12 MultiNode Installation with VMWare.
I will share my experience here with all on how to setup R12 in a single node first and then add another Middle Tier.
Setup Requirement : Node with atleast 1 GB of Ram and 80GB of HardDisk , OS Dump , R12 Dump and VMWare Software
Download a Copy of VMWare WorkStation from http://www.vmware.com/download/ws/ for Linux
You will need an evaluation key
http://www.vmware.com/vmwarestore/newstore/wkst_eval_login.jsp , make sure you have the key before you start the Installation.
I downloaded an Image of Redhat Linux RHEL4-U4-i386-ES
Linux Node Setup Information:
1. Install OS Image on to the Box
2. Name the host , say r12lab01.r12.com and assign a static IP
3. Make sure you have all the latest RPM's in place. For more info refer R12 OS Pre-requisite Notes.
4. Open a VNC Server as Root
5. Download the VMWare RPM Package "VMware-workstation-5.5.3-34685.i386.rpm"
6. Install the RPM Package
7. Configure VMWare using "http://www.vmware.com/support/ws5/doc/ws_install_linux.html"
8. Start VMware Workstation ( /usr/bin/vmware )
9. Enter your serial number.
10. Create a virtual machine using the New Virtual Machine Wizard.
( ref : http://www.vmware.com/support/ws5/doc/newguest_ws.html )
11. Install a guest operating system in the new virtual machine.
You need the installation media CD-ROM for your guest operating system
12. Name the New Virtual Host as r12lab02.r12.com and assign a static IP
13. Make sure that you can communicate between first and the second node.
I am struck up here, can you explain me how to do this,
14. Power Off the Node and Start Fresh , make sure you have no OS Issues.
15. Keep the VNC Session Active. ( If you loose it , your will not have the new node )
R12 Setup Information:
1. Download Dump of R12 from http://edelivery.oracle.com
2. Stage them on the Hard Disk( I did not include the space requirement of the Dump above)
3. Run a Single Node Installation
4. Make sure that the Installation Completed Normal and all the Service are Up and Running.
5. Perform a Complete Health Check.
Adding a Node to the Existing Setup:
1. Power on the Second Node
2. Mount the R12 Mount Points on the Second Node.
i tried in VMware environment, but i am not able to mount the mount points,
3. cd /home1/aptest/test/apps/apps_st/comn/clone/bin/
4. perl adclonectx.pl addnode contextfile=TEST_r12lab01.xml
Target hostname (virtual or normal) [r12lab02]:
5. Make sure that the above process generate the Secondary Node's Context File
6. Make the Service Enabled that you want to run on the Second Node.
Initially have web service configured and later modify according to your need.
7. Move into AD_TOP/bin and run adconfig.sh , context_file=TEST_r12lab01.xml
8. Make sure that Autoconfig Complete's Normal.
9. Source the Environment File
10. Start the Service on the Seconday Node
11. Navigate to OAM and verify that you have the Second Node.
Edited by: HumanDBA on Apr 27, 2009 7:51 AM

Setting up a remote with ir-tables for use with XBMC

My main goal is to use a remote with xbmc, but I'm having issues.
Issue #1 (main problem): The directional keys and enter will work but no other keys seem to register.
Issue #2: Even the keys that work have this weird usage issue, where pressing any of the same key twice loses the second key press. For example clicking up arrow 4 times results in only two actual "up's" being done. (first up works, second fails, third works, forth fails, etc)
I've spent about four hours getting to this point and there is a lot of conflicting information out there on this subject which has had me very confused, but at this point I assume I can ignore any mention of Lirc as it seems like its not needed and if ir-keytable is used correctly things should just work?
Quote from www.lirc.org: "Recent linux kernels make it possible to use some IR remote controls as regular input devices"
What I have got/done:
Machine: Zotac Zbox Nano AD10 with remote.
Linux: Manjaro Openbox Addition
Testing in applications: XBMC, Leafpad, Terminal
[david@zotac ~]$ dmesg | grep CIR
[ 4.444693] ite_cir: Auto-detected model: ITE8704 CIR transceiver
[ 4.444701] ite_cir: Using model: ITE8704 CIR transceiver
[ 4.478490] input: ITE8704 CIR transceiver as /devices/virtual/rc/rc0/input8
[ 4.478531] rc0: ITE8704 CIR transceiver as /devices/virtual/rc/rc0
[david@zotac ~]$ ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event6) with:
Driver ite-cir, table rc-rc6-mce
Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
Enabled protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
Name: ITE8704 CIR transceiver
bus: 25, vendor/product: 1283:0000, version: 0x0000
Repeat delay = 500 ms, repeat period = 500 ms
#My keymaps file contains (I just put the keys that I would like to use with xmbc)
0x8034045b KEY_RIGHT
0x8034045a KEY_LEFT
0x8034045c KEY_ENTER
0x80348459 KEY_DOWN
0x80340458 KEY_UP
0x80348421 KEY_R
0x80340420 KEY_F
0x80348410 KEY_EQUAL
0x80348483 KEY_ESC
0x80348431 KEY_X
0x8034842f KEY_T
0x803404cb KEY_I
0x8034845d KEY_M
0x8034042c KEY_P
0x80340411 KEY_MINUS
I write my keymaps file: (I think /etc/keymaps/[file] would be a better location for this file but it shouldn't matter is that correct?)
ir-keytable -c -w /home/david/Documents/keymaps --device=/dev/input/event6 --period=500 --delay=500
I can verify the settings are registered:
[david@zotac ~]$ ir-keytable --read --device=/dev/input/event6
scancode 0x80340411 = KEY_MINUS (0x0c)
scancode 0x80340420 = KEY_F (0x21)
scancode 0x8034042c = KEY_P (0x19)
scancode 0x80340458 = KEY_UP (0x67)
scancode 0x8034045a = KEY_LEFT (0x69)
scancode 0x8034045b = KEY_RIGHT (0x6a)
scancode 0x8034045c = KEY_ENTER (0x1c)
scancode 0x803404cb = KEY_I (0x17)
scancode 0x80348410 = KEY_EQUAL (0x0d)
scancode 0x80348421 = KEY_R (0x13)
scancode 0x8034842f = KEY_T (0x14)
scancode 0x80348431 = KEY_X (0x2d)
scancode 0x80348459 = KEY_DOWN (0x6c)
scancode 0x8034845d = KEY_M (0x32)
scancode 0x80348483 = KEY_ESC (0x01)
At this point is seems like everything is setup correctly but like I said only the direction keys and return work. If it did work my next step would be determining when to issue the ir-keytable write, and I'm assuming I can just do that in openbox's autostart file?
Does anyone have any ideas as to what I might do to correct these issues?

I also encountered davevallance's issue #1. Directional and enter keys already work, as do volume keys. If any other button is mapped to those working keys (using ir-keytable) then they also work, for example I can successfully map the useless "teletext" to "enter" and it produces a linefeed when pressed but I cannot get it to do the same with "space". Interestingly it does produce a space keypress in a virtual terminal (Ctrl+Alt+F3), also "ir-keytable -t" shows the correct key event which proves the underlying OS is recognising the mapping. The issue is somewhere in the X system instead.
I refer now to HID Remotes which covers the situation well. It explains that X does not process keycodes above 255 and at first that would seem to fit here. All the keys which work (arrows, enter, volume) have keycodes less than 255. So why don't other 'safe' keycodes work too?
Xorg has it's own keycode map with "xmodmap" but I don't think that is responsible in this case. From the Arch wiki it suggests exploring with:
xev | grep -A2 --line-buffered '^KeyRelease' | sed -n '/keycode /s/^.*keycode $[0-9]*$.* (.*, $.*$).*$/\1 \2/p'
Unmapped keys should produce a "NoSymbol" message but for my non-working keys there is no response at all in X. Is there another layer between kernal and GUI?

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

I bought a MBPro which came with Lion installed,i also wanted to have a copy of installation disc so i used mac app store.Normally if an app is already bought there is a warning or a sign that informs the buyer.I've charged for this download is it normal?

Hi ,i bought a MacBookPro which came with Lion installed on it (i have registered my mac book pro right after i bought it), i also wanted to have a copy of the installation disc in case of a crash, so i used mac app store to get it.Normally if an app is already bought (for iphone app store) there is a warning or a sign that informs the buyer, than the app store lets the buyer to re-download/re-install the app.I've charged for this download afterwards, because i was using virtual credit card, there was not enough money transferred to that card during that download but the app store let me download it anyway. I haven't charged before the download, the app store first let me to download it then it requested that amount of money for next download wich it was a free app. Can anybody enlight me? thanks

Hi ...
i also wanted to have a copy of the installation disc in case of a crash
If you have problems with your Mac you use Lion Recovery
However, you can create your own installation disc > How to create an OS X Lion installation disc | MacFixIt - CNET Reviews
Since Lion came pre installed on your Mac, the App Store doesn't not recognize that as a purchase so you if you want to re download Lion to create a boot disk you will have to pay for it. You can then re download Lion on all your authorized Macs for free.

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

What?
You want to control iTunes on your computer using the Remote app on your iPad?
And you want to connect the iPad and computer through your Nokia?
No, this will not work.
Just create a network with your notebook.

Hi, i purchased iphone 4s with ios 5.1 from saudi arabia.my iphone 4s is not detected in itunes 10.6 version although i tried it by re installing itunes.i use windows 7 ultimate on my pc.

Hi, i purchased iphone 4s with ios 5.1 from saudi arabia.my iphone 4s is not detected in itunes 10.6 version although i tried it by re installing itunes.i use windows 7 ultimate on my pc.

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed. Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed.
Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

You need to run a platform swap:
Order product | Platform, language swap
Until it's through, you can use the trial version.
Download CS6 products
Mylenium

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion. Use the program Pacifist to install it.

Cannot type in previously used forms with newly installed 9.1 reader

Recently installed upgrade to 9.1 adobe reader.
Now the forms previously typed in cannot be filled with letters or numbers. These forms were from state institutions and meant to be filled out and typed with adobe. I successfully used these forms with the previous version of adobe reader.
The purple band shows at the top indicating the form can be filled. The I bar shows up and can be placed in the blank spaces but no letter can be typed in the forms.
Is this the result of failure of the upgrade software ?
Has any one experienced this problem?
I have only one installation of th adobe software 9.1 installed.
In reviewing the help data on line I noted they indicaed a "security setting" under file/ preferences. I dont know what they are talking about?
Have done the following based on other suggestions .
Changed the preferences changed the PDF/ A mode to "never'
Also now understand the security setting for the document. The document restriction summary show the document to allow "filling of forms fields" along with printing and content copying . Does not allow document assembly and siging.
Still unable to fill out the form
Message was edited by: visbama

Was your previous version of Reader earlier than version 9? Adobe abandoned an early version certain technology used to allow people to fill out forms and save them on their own computer. If the forms can be filled out with earlier versions of Windows, then you are stuck. Either the people have to re-enable the forms using newer technology or you need to use an earlier version of Reader. A similar problem creeped up with IRS forms.

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

How can i download and install and really use Adobe Flash Player on my MacBookAir with OS X 10.8.2 ??

How can i download and install and really use Adobe Flash Player on my MacBookAir with OS X 10.8.2 ??

Hello Allan,
thank you for your promt message. I have download the installer like many times before and install the flashplayer like many times before, too. But it does not work ... only getting the black screen ... but then, after checking some settings and defaults i realize that i have to switch in Safari > Security > Plug in to status activated !!!
Shame on me and sorry for wasting your time, but i started with Mac 3 weeks before and have to leave windows-thinking !!! But i am convinced that mac is the better way ...
By Soeren

I bought used iMac 2007 with Mavericks installed but iPhotos was missing. I reinstalled Mavericks but didn't get iPhoto. Now if I want it I have to buy it? Is there a way to install it without having to pay for it?

I bought used iMac 2007 with Mavericks installed but iPhotos was missing. I reinstalled Mavericks but didn't get iPhoto. Now if I want it I have to buy it? Is there a way to install it without having to pay for it?

If you own any verson of iPhoto '11 then there is a free update to version 9.5.x in the App store
If you own a previous version of iPhto (iPhoto '09 or earlier) then as always an upgrade to a new version (in this case iPhoto '11) is a paid upgrade and you purchase it in the App store
and no OS update/upgrade contains a version of iPhto - it is a seperate program and although it is included as part of every new Mac it is not a free program and never has been sinve version 1 or 2 (I forget when it changes)
LN

Lirc with xbmc -- Install lirc or use mceusb module?

Similar Messages

Maybe you are looking for