Lire des informations via ethernet sur un enregistreur "Eurotherm 6100"

Bonjour à tous,
Pour un projet, je dois me connecter via ethernet à un enregistreur "Eurotherm 6100". J'aimerais utiliser les informations sous Labview. Malheureusement, je ne trouve pas de driver pour cet instrument. Il existe des drivers avec Eurotherm mais pour d'autre instrument.
Lorsque je connecte mon Pc avec l'enregistreur (câble croisé) et que j'envois un Ping, j'ai un retour.
Mais lorsque j'ai envie d'installer avec Measurement & Automation Explorer --> Périphériques et interfaces --> VISA TCP/IP Resources, je n'arrive pas à communiquer avec!
J'utilise la détection automatique mais il ne le trouve pas ça c'est normal, donc j'introduis l'adresse IP il y a un rond jaune qui m'indique qu'il y a problème.
Il indique l'adresse ainsi: TCPIP0::140.121.130.232::INSTR, je sais pas si je dois fournir d'autres informations a part l'adresse ip?
Si quelqu'un à une idée??
Bien à vous,

Hello everyone,
On this part of the forum the readers will be in general not French speaking or understanding.
Most people on this part on the forum will be native (or at least fluent) English speaking.
If you would like the question to be answered in French, then it would be best to go this part of the forum:
http://forums.ni.com/t5/Le-forum-francophone/ct-p/FrenchForums
Can you let me know in which language you would like to do the troubleshooting?
Depending on this answer we can repost the question in English in this thread or post it on the French section of the forum.
Thank you for your feedback!
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

Similar Messages

Bonjour ,je partage des photos via iphoto sur les réseaux sociaux ,j'aurais aimé savoir si après le partage ,je peux retirer mes photos de iphoto sans en enlever de iphoto ?

Bonjour ,je partage des photos via iphoto sur les réseaux sociaux ,j'aurais aimé savoir si après le partage ,je peux retirer mes photos de iphoto sans en enlever de iphoto ?
Hello, I share photos via iPhoto on social networks, I would like to know if after the partition, I can withdraw my iphoto photos without removing iphoto?

While you are free to do what you want - it is strongly recommended that you do not use a referenced library (Do Not uncheck the preference to "copy imported items to the iPhoto lbrary") If creates problems, saves no space and sets up for futrue nighemares
You final conclusion is the correct one - FOR YOU - if you want destructive editing rather than the lossless editing that iPhoto provides then simply do not use iPhoto
LN

Lorsque mon fils ou moi téléchargeons de la musique ou des application via Itunes, celles-ci apparaissent sur nos deux téléphones. Comment faire pour que cela ne soit plus le cas même s'il a besoin de mon mot de passe pour le faire vu qu'il est mineur.

Lorsque mon fils ou moi téléchargeons de la musique ou des application via Itunes, celles-ci apparaissent sur nos deux téléphones. Comment faire pour que cela ne soit plus le cas même s'il a besoin de mon mot de passe pour le faire vu qu'il est mineur.

Bienvenue dans la communauté Apple.
Paramètres> iTunes et App Stores> Téléchargements automatiques> Désactivé.

Publication des informations sur le produit

toujours le meme probleme lors de l'installation de itunes 10.5 ou bien apple aopplication support: l'installation reste bloquée sur "publication des informations sur le produit".
je n'ai plus de solution !

Re bonjour Nadal06,
Malheureusement les alimentations de puissance proposées par NI fournissent une puissance continue et non alternative.
La gamme "PS" propose des alimentations externes de puissance de ce type (attention, elles ne s'enfichent pas dans un chassis PXI).
vous trouverez leur spécifications en suivant ce lien
La solution éventuelle que je vois serait d'utiliser ce type d'alimentation, suivit d'un dispositif de convertion DC -> AC de forte puissance (Je ne crois pas que NI propose de tels dispositifs). Ce pendant je ne sais pas du tout si cette méthode est prudente compte tenu des puissances générées par les alimentations et du coup du matériel utilisé.
Je suis désolé de ne pas pouvoir vous proposer de materiel NI entièrement adapté à vos attentes.
Cordialement,
Vincent.O
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

HT4262 Is there any way to extend my Apple Extreme Base Station using an Apple Express by via ethernet or does it only work via wifi and being in range?

From what I read, the only way to extend my Apple Wifi Network is via another Apple Airport Extreme or Express using overlapping wifi zones. If I try to connect my Apple Express to my Apple Extreme via Ethernet, then this is guaranteed to fail regardless of how I configure the Express. Is that correct?

It is certainly possible and better....in terms of performance.....to connect the AiPort Express to your AirPort Extreme using Ethernet to extend the network that way.
If you are having problems with this, then your setup is not correct....or....if your setup is correct, you may have a defective AirPort.
We can walk you through the steps to get things set up correctly if we can get some basic information to provide the correct settings.
What is the model number of the AirPort Extreme?
What is the model number of the AirPort Express?
if you are not sure, look on the bottom of the Extreme and side or bottom of the Expess. The model number starts with an "A" followed by four numbers.
We also need to know what operating system you are using on your computer. If you have a Mac, click the Apple icon in the upper left corner of the screen, then click About This Mac and post back with the OS X Version number that you see there.
We will likely have more questions about your current setup to understand things a bit better, so please be patient.

I am linking 7 express's to an extreme via ethernet cables in very large estate. Is there a specific "backbone" you recommend for use in such an application? Thank you

I am linking 7 airport expresses to an airport extreme via ethernet cables in a large estate I maintain. Is there a specific product apple recommends to act as the "backbone" in such an application? Any information would be appreciated. Thank you

Is there a specific product apple recommends to act as the "backbone" in such an application
Apple does not recommend a specific product in this regard.
In general, you would connect an Ethernet cable from one of the LAN <-> ports on the AirPort Exteme to a Gigabit Ethernet switch, then connect as many Ethernet cable runs as you want to use to remote locations around the house.
Ethernet switches come in 5-port, 8-port, 16-port etc versions, so choose according to your needs.
I recommend Netgear and Cisco switches, but I am sure that there are other good products from which to choose.
Be sure to run CAT6 Ethernet cable to allow for the faster speeds coming in the next decade or so.

Cannot connect to internet with iMac connected to airport via Ethernet

Hi all,
Firstly please forgive if this problem has been posted before but unfortunately i haven't yet been able to find a solution to my problem.
I cannot seem to get my wireless network to work since updating my Airport to v5.7. I have reverted back to 5.6 but with no joy. OK, here's my setup - I have an iMac G5 1.8 which is connected to my airport via an ethernet cable (it is plugged into the correct port) and an iBook with an Airport card to connect wirelessly. The airprot is connected to my ADSL modem which is a D-Link 300T. When set up like this my iMac cannot connect to the internet even though my iBook can. When i take the4 iBook and Airport out of the equation my iMac connects fine to the internet via ethernet cable direct to my modem.
As i've said, as soon as i bring in the iBook and Airport the iMac cannot connect via airport extreme, even though the iBook can connect.
I have searched through the discussions looking for clues and answers. I have made sure that distrubute IP address is not checked and that internet sharing is off on my iMac but on on my iBook. I have tried all channels and all possible different settings on the airport admin utility but nothing works.
I hope i've given enough information to give a clear indication what is wrong, if not please ask and i will try my best to answer. Any help would be much appreciated so i can convince my girlfriend that buying my iBook was not "a waste of money!".
Many thanks in advance,
Carl.

Same questions as Paul.
Open up the Network System Pref on the iMac G5.
If you pick Show: "Network Status", what do you see ? Be precise.
If you change Show: to "Built-in Ethernet", what do you see on the TCP/IP, PPPoE and Ethernet tabs ? Again, be precise.
On the Network Status, you should see a green mark next to Built-In Ethernet, which should be at the top. It should also give you an IP address and tell you you are connected to the Internet. Well it would if it was working, so "say what you see".

Lire et écrire un fichier sur le réseau depuis le CRIO

Bonjour,
voici mon architecture :
CRIO
IP : 10.70.107.69
PC
IP : 10.70.107.68
chemin du fichier
C:\Documents locaux\Data\fichier.xml
Depuis le VI main_RT de mon CRIO, je cherche à lire le fichier se trouvant sur le réseau pour y récupérer des informations de production. Puis tout au long de la production, j'aimerai écrire dans ce fichier mais toujours sur son emplacement sur le réseau.
Je ne parviens pas à le faire. Je bloque sur le chemin à fournir au CRIO pour qu'il aille chercher le fichier.
actuellement je lui donne comme paramètre : \\10.70.107.68\C\Documents locaux\Data\fichier.xml
mais je récupère l'erreur "Not a path"
Cordialement,
Noahsaga

Je crois effectivement avoir testé les 2 : partage du dossier et modif du chemin.
Je précise que le PC sur lequel est stocké le fichier XML appartient au réseau usine et que je n'ai pas la possibilité de créer une application Labview sur celui-ci. La seule action qui m'est autorisée à faire est cette lecture écriture du fichier.
Noahsaga
Message Edité par noahsaga le 05-25-2010 09:45 AM

Airport utility cannot find my Airport Express, repeated rescans, nothing, even with direct connect via Ethernet. Help!

I use Airport Express to stream iTunes to my home stereo. This is the ONLY thing I use it for. It quit working and now Airport Utility cannot find the Airport Express unit, even after repeated re-boots of all components, resetting the Airport Express, even when connected directly to my router via Ethernet. I use a D-Link wirless router.
I downloaded the latest Airport Utility, but it will NOT work with XP (from the Apple website, not my words).
The Airport Express will achieve a solid green indicator after reset, but Airport Utility cannot find it. Until Utility can find and recognize the Airport Express hardware, I cannot adjust or reset any settings, etc.
Help!

I downloaded the latest Airport Utility, but it will NOT work with XP (from the Apple website, not my words).
The latest version of AirPort Utility.....5.6.1.....will only run on a Windows 7 machine.
Try AirPort Utility 5.5.3 for Windows (make sure that you have Service Pack 3 installed on your PC, otherwise the application will not run on an XP machine).
The Airport Express will achieve a solid green indicator after reset, but Airport Utility cannot find it.
After a "hard reset" or "factory default reset", the light will not be green.....it will be slowly flashing amber after it restarts. See this Apple support document for more information on various resets:
Resetting an AirPort Base Station or Time Capsule FAQ

Comment augmenter la tailles des informations et commandes dans photoshop c5

au cours d'une mise à jour la taille des informations et le visuel de photoshop est devenu difficile à lire pour moi quel est la procédure pour augmenter la taille de lecture des commandes

Hello,
Je ne suis pas sur que la méthode de la DLL soit une bonne idée. Je ne vois pas en quoi cela aidera au partage de données entre deux applications (c'est très compliqué). Pour lire/écrire un fichier binaire, il faut savoir exactement comment sont agencés les types de données en mémoire, comme mentionné. Et notamment pour les tableaux, les en-têtes sont nécessaires (sinon on ne sait pas où s'arrête le tableau!). Il suffit de connaitre la taille de l'en-tête à la relecture pour la traiter correctement.
Pour les types de données à passer à des DLLs, quelques documents intéressants :
- http://digital.ni.com/public.nsf/allkb/5FE3C48E8E1C3D018625722900681AF6?OpenDocument
- http://digital.ni.com/public.nsf/allkb/9216E4328E6704C3862576330071CF8E?OpenDocument
Note : si les données sont relues immédiatement sur l'autre application, passer par une liaison TCP serait peut-être plus simple et plus rapide...
Cdt
--Eric
Eric M. - Application Engineering Specialist
Certified LabVIEW Architect
Certified LabWindows™/CVI Developer

How to connect a pc via Ethernet to an Airport Extreme

For about a year I have had an Airport Extreme running my iBook laptop on wifi and the iMac on Ethernet. I also have an IBM Thinkpad (T/P) running Windows 2000 which I wanted to connect via Ethernet cable to the AE and get on the internet to use various ham radio applications written for peecee's only. So far I have not been able to get the T/P to connect to the web, trying every way to get the thing to connect. The T/P is a second hand unit from work and I have no manual for it. There is also little documentation in the AE booklet concerning Ethernet and non-Mac gear. Does anyone have a suggestion as to how I can make this work, or another website that may have more specific info?
Message was edited by: bob.c

You are absolutely right about nothing with Windows being easy..... The ethernet cable is plugged in and I went to Network Connections and followed the wizard. Now I have a small icon on the right side of the bottom bar, looks like two computer screens but only one is green. A right click on it says the local area network is connected and sending 100 Mbps but receiving zero. If I go to Tools/Internet options, I can go thru the Internet Connection wizard for setting up a LAN. One of the pages asks to configure the proxy settings and has two choices: automatic discovery or "Use automatic configuration script" with a box labeled "Address". I don't know what to put in this address but have tried the IP address and the router address: no joy.There is also a check box for Manual Proxy server and I have tried both Yes and No....again, no joy. It's as though the T/P sees the internet doorway but can't bring anything back thru the door! Any further ideas sure would help. Thanks!

I'm able to connect via wifi but not via ethernet

I have a iMac, Mac OS X v10.7.5, and recently had a problem connecting to internet. I can connect via wifi, but when I try connecting via ethernet it's not working. When I go to the preferences > network, it shows "green" / connected for ethernet but when I open up Safari or Firefox, it doesn't show a connection to the internet.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
10.5/10.6 instructions, System Preferences>choose interface>Advanced>Proxies Tab, make sure none are set, like for HTTP & HTTPS.

Macbook Pro suddenly will not connect to the internet via ethernet cable.

I know this is a long shot... but I figured I would give it a try.
My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue. Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

How do I connect a PC via ethernet to my new Airport Extreme router?

I just replaced an old Actiontec router with a new Apple Airport Extreme router to work with my Verizon FIOS service. Connection to all Apple products via ethernet or wireless works OK, however I cannot get the PC up and running via its ethernet connection to the Airport Extreme. Any help would be much appreciated.

If your other devices are working then it is probably the PC's IP configuration.
First, make sure that the PC is actually connected to the Extreme by verifying the lights are on at the Ethernet ports on the PC and the Extreme.
If you are using DHCP to manage the IP addresses then make sure that the PC is configured to "Obtain IP Address Automatically" for both IP versions 4 and 6.
When I replaced my Linksys w/ an Extreme I forgot that I had a couple devices configured with static (manual) IPs. My old one used the "192.168.1.nn" and my Extreme defaulted to "10.0.1.nn". Once i converted all the static IPs to the correct subnet then all was good.

Can I connect my Airport Extreme Time Capsule via ethernet to another router (non-Apple)?

I've been trying to figure this out for a few hours and have gotten nowhere. I have an Archer C7 AC1750 router set up in my office, connected to my Zoom 5341 DOCSIS 3.0 Modem; this has been my main router and has worked fine. I have moved some things around and now have my PS3 and PS4 in my master bedroom but can no longer hook them up via ethernet to the Archer C7. I have run ethernet through the attic into the master bedroom and want to use my Airport Extreme Time Capsule as a way to hook up the consoles via ethernet. If I can use the Airport Extreme to extend my wireless network back to the bedrooms that is even better, although that is an afterthought.
I am not sure what the settings need to be to make this happen. I have searched and tried a number of things but have not found a working solution.
Any help would be greatly appreciated.

Please start over with a default reset on the Time Capsule. This will not affect any of the stored data that you might have on the drive. You can use the same device name and password that you used before if you wish.
Power up the Time Capsule for a few minutes. Then hold in the reset button firmly for 10 seconds and release. Allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
Make sure that the Ethernet cable connection from the Archer router connects to the WAN "O" port on the Time Capsule
Open up AirPort Utility
Click on Other WiFi Devices
Click on Time Capsule xxxxxx
AirPort Utility will suggest a setup, which you want to ignore
Instead, click the Other Options button
Select the Create a new wireless network setting and click Next
In the Network Name box, enter the exact name of your Archer wireless network
In the Base Station name box, enter a name that you want to use for the Time Capsule device
Uncheck the box to use a single password
In the Network Password box, enter the password for the Archer wireless network
Verify on the next line
In the Base Staion box, enter a password that you want to use as a device password for the Time Capsule
Verify on the next line
Click Next and wait while the AirPort Utility creates a network
Ignore the step about unplugging the modem and click Next
Do not enable the Guest Network option and click Next
Wait while the network is being set up. When you see the message that the wireless network is available, click Done
The Time Capsule will now appear in AirPort Utility with a blinking amber light
Click on the Time Capsule icon, and then click on Edit in the next small box that appears
Click the Network tab at the top of the window
Change the setting for Router Mode from DHCP and NAT to "Off (Bridge Mode)"
Click Update at the lower right and click Continue
Wait a full minute for the Time Capsule to restart and you should have a green light
It would be an excellent idea to power off both the Time Capsule and Archer router now, wait a minute, then start the Archer router and let it run a minute. Then, start the Time Capsule up and give it a minute
You should be all set. The Ethernet ports on the Time Capsule are now operable and the wireless network has been extended using AES encryption.

Lire des informations via ethernet sur un enregistreur "Eurotherm 6100"

Similar Messages

Maybe you are looking for