LIS datasources generation and activation

Hi experts,
I have to start a new MM implementation on a fresh installed SAP ECC and SAP BI 7.0 systems.
So I have to activate the LIS datasources on the ECC source , activate them and load delta data into BW.
Can you show me a document that tracks the differents steps to follow ?
regards

Hi,
Check in SDN
Logistic information system (LIS)
Business Content and Extractors
Thanks
Reddy

Similar Messages

Relation between LIS datasources and Extract Structures

Roberto,
Your detailed information does make it very clear why the SAP creates 2 SnnBIW1, SnnnBIW2 tables, and a structure.
I have another question related to this process.
Once you create a datasource from the custom LIS structures, you can assign a Development class to that datasource.
But the automatically created 2 tables and the structure are local objects, and you cannot reassign them to other object. That is fine because when you export/import the transport, all the other objects are also transported.
But when we enhance the extract structures, it creates a structure ZASnnnBIWS which also HAS TO BE a local object. This creates a problem of how do we transport these changes?
I would appreciate your insight into this.
Thanks
InduBala

I check from LBWE maintenance structure column, and the fields are there on the left hand side for the selection criteria.
How would I check "..fields you have enhaced are ready to use...." from LBWE.
From RSA6, I would doubleclick on the LIS datasource, and I see no enhanced fields and therefore could not see if they are hidden.
"Did you check in LBWE if your strcutures have the fields ready to use?" How would I do this? Maybe this is the problem.
Thanks
Message was edited by:
NoNoNo ...

2lis_02_174 - Lis Updating is still activated

Hi All,
Im little confused about using Lis structures, maybe you can help.
This are the stepds that i did:
R3 Side
1) Tx RSA5 and activated 2LIS_02_174 (services)
2) Tx RSA3 and the extractor works Ok
BW Side (BI 7.0)
3) Replicated datasource
4) Activated standar cube 0SRV_C01
5) Executed INITIAL load and appears this message error "LIS Updating is still activated".
Im sure that i have missed some steps, can anyone help me about this please?
I will assign points.
Regards

Hi,
Before Init Load you have to desactivated in OMO2, then executed the Init load.
Afte this, you have to activated in OMO2 and activated the delta update in LBW0
Regards

LIS updating is still activated

Hi all
I am receiving the following error when I try to do a INIT load on extractor 2LIS_01_S005:
LIS updating is still activated (client abc ) M + 25
I have read other SDN posts and I have made the change in both our DEV source systems in TCODE LBW1 to No Update, but I am still getting the error. I am able to do a full load on my InfoPackage but no INIT.
I would appreciate any help or suggestions.
Thanks

See OSS Note 168131.
Symptom
Using report RMCSBIWC you want to generate the delta update in the LIS in the OLTP System. The system generates message M+025:
'LIS updating is still activated'.
Cause and prerequisites
The standard update for the affected structure is still active in at least one client of your OLTP System.
Solution
To be able to generate the delta update for an information structure, you must deactivate the update of this information structure temporarily in all clients.Deactivate the update using the LIS Customizing or report RMCSBIW0 (TCode LBW1 see Note 146294) in ALL clients of the OLTP System in which the information structure is updated.You can activate the update again after generation.
Edited by: Pravender on Mar 3, 2010 5:28 PM

Proformance issue with 'sid generation on activation'

Hi Gurus,
In our BW(NW 2004) system we are using Cognos as reporting tool, due to process chain failure at DSO level we unchecked 'sid generation on activation' and chain running successfully after that.
unchecking will be a performance issue due to generating sid's at run time as per SAP.
My question is as i am using Cognos in place of BEX. what are the possiblities of effecting the performance and alll?
Please provide your valuable suggestions.
Thanks in Advance,
Suresh.

Hi Suresh,
Irrespective of what is the reporting front end you use, if you use this DSO for reporting it would generate the SID values at the runtime which will have huge impact on reporting performance. Just removing the SID generation option would temporarily fix the load issue, with quick activation of DSO but it will affect the most important area reporting performance.
Try to solve the issue with SID generation error while activating at the BW side which could be because of the special character issues and once you fix that your process chains would load fine with a far better performance while reporting on this DSO.
Regards,
Mani

Datasource error- while activating it- warnings occured

Hi experts,
I'm using the standard BC datasource 3FI_SL_7R to load the data into the cubes 0rtl_c01 & 0rtl_c03.
while activating the data source in the R/3 the system displayed the below warnings:
"Generating DataSource 3FI_SL_7R"
"Delta process ABR for DataSource 3FI_SL_7Rrequires a cancellation field"
by ignoring them i configured the whole data flow, but while i scheduled the data for extraction it showed the following errors in the monitor error message:
"The extraction program does not support object"
I again activated the function module, extractor and the datasource(again with warnings), and done the whole thing once again but i came across the same error in the monitor.
Does any one have a solution for this PLZ HELP ME.
UR HELP WILL BE HIGHLY APPRECIATED.
thanks & regards

Hi
Here is the following note:
Symptom
You want to use the delta mode for the BW extraction of total record data from FI-SL or EC-PCA.
Other terms
0EC_PCA_1, 3FI_SL_
Reason and Prerequisites
Note the following prerequisites and restrictions:
This note only applies to totals record DataSources.
The R3 Release must be 4.0B or higher.
The delta method is currently only available for actual data.
The delta method uses the same transfer structure as the full upload, that is, only totals record fields are transferred.
The BALANCE field of the transfer structure is not filled. To get the non-cumulative for balance sheet accounts, you can either create a non-cumulative value in the BW System, which is updated via values DEBIT/CREDIT, or accumulate the transactions of period 0 to n in the query definition.
You must use the online through-posting for balance sheet accounts. You can create a separate InfoPackage that works in the full upload for balance sheet accounts that are transferred periodically.
The line item update must be active for currency conversions in the FI System.
Deleting transactions are not connected to the delta method:
a) Periodic CO data transfer (transaction 0KE0) (use transaction 1KEA instead because this transaction cancels the data instead of deleting it).
b) Rollup
c) Delete transaction data (transaction 0KE1)
d) Modification of SAPFGVTR balance carryforward program (transaction GVTR):
After you implement the modification from note 182201, the ZZVTR001 delete program used there is not connected for the carryforward balances (TSLVT, HSLVT, KSLVT fields and so on).
              This means:
              Do not use these transactions if a delta method is initialized for the same selections because the deletion is not updated for the BW system.
               If you absolutely have to use one of the transactions or you have used one of them by mistake, you must delete the initial requests and delta requests from the InfoCubes in the BW system and you must restart the delta method with an initial upload.
Posting is not allowed during the initial upload. You must take organizational measures to make sure that no posting takes place at that time because there is no corresponding system check at present.
If the delta method was initialized for a source system, you must regularly schedule a delta upload so that the delta queue does not overflow. If you want to stop the delta method you should also delete the initialization. You can display the delta queue in the source system via transaction RSA7.
Enter the selection for the actual data in the information package (0VTYPE = 010). Planning data can be transferred with another InfoPackage in the full upload.
Solution
The solution is contained in the standard version as of Release 4.7A. The solution may be implemented in advance for lower releases:
To activate the delta method for DataSource 0EC_PCA_1 and for 3FI_SL_* generated totals record DataSources, you must perform the following steps in the OLTP:
Caution:
Steps 1 and 2 are delivered in Support Packages with note 485264 and no longer have to be executed with the corresponding Support Package status.
1. Create the following function modules in accordance with the correction instructions:
a) OPEN_FI_PERFORM_00005030_P in function group BFFM2 (4.0B - 4.5B)
                           or in function group BFFM3 according to note 450079 (4.6B - 4.6C)
b) OPEN_FI_PERFORM_00005040_P in function group BFFM2 (4.0B - 4.5B)
                           or in function group BFFM3 according to note 450079 (4.6B - 4.6C)
c) SAMPLE_PROCESS_00005030 in function group BFFMSMPL2 (4.0B - 4.5B)
                                                 in function group BFFMSMPL3 (4.6B - 4.6C)
d) SAMPLE_PROCESS_00005040 in function group BFFMSMPL2 (4.0B - 4.5B)
                                                 in function group BFFMSMPL3 (4.6B - 4.6C)
and create the following data elements using transaction SE11:
e) PR00005030
              Text: Open FI process 00005030
              Domain: XFELD
f) PR00005040
              Text: Open FI process 00005030
              Domain: XFELD
2. Add the following entries to table TPS01:
PROCS INTERFACE Text1
00005030 SAMPLE_PROCESS_00005030 BW delta extractor PCA FI-SL
00005040 SAMPLE_PROCESS_00005040 BW delta extractor PCA FI-SL
3. Implement the remaining corrections in accordance with the correction instructions in reports:
a) FGIDBF24
b) FGVTRF20 (up to and including Release 4.6B)
c) RGUGVTR0 (up to and including Release 4.6B)
d) and in function module G_BIW_GET_TRANSACTION_DATA (except for Release 4.0B)
4. Regenerate the update modules
a) Execute report SAPFGIDB using transaction SE38 with process type 1
b) Execute report RGUGVTR0 using transaction SE38 (up to and including Release 4.6B)
5. Implement the corrections from note 325824 (only Release 4.6C)
6. Execute report GBIWDGEN by using transaction SE38 (you must implement note 407091 beforehand up to and including P2001.1)
7. Change the data record in table ROOSOURCE for OLTPSOURCE = 0EC_PCA_1 and OBJVERS = A in field DELTA to 'ABR'. This may be done using report ZPCA_DELTA_FOR_0EC_PCA_1. Follow the same procedure for an FI-SL totals record DataSource.
As of PI 2003.1, the delta mode 'ADDD' is used instead of 'ABR'; an indicator is also set in the T881IS_PI control table. If you have installed Plug-In Release 2003.1 or higher, use the attached ZGBIWPI_DELTA report instead of the ZPCA_DELTA_FOR_0EC_PCA_1 report.
8. Replicate the DataSource in the BW System and activate it.
Import the changes into the production system via transports and then perform steps 4, 6, 7 and 8 again.
You will have to repeat step 6 again if you encounter problems after the Plug-In upgrade.
When you upgrade the source system to Release 4.7, discard the modification of reports FGIDBF24, FGVTRF20 and RGUGVTR0 during the data comparison and use the delivered version of these programs. If you use this note for FI-SL DataSources, call transaction BW03 once and accept the conversion of the DataSources in the dialog box that appears. If you do so, an initialized delta method will continue to run successfully even after you upgrade the source system.

I have a nano ipod first generation and I am havng a problem syncing it to my computer. It won't sync.

I have an iPod nano first generation and I am having trouble syncing it to my computer. My email address is [email protected]

Thanks, I deleted a bunch of apps and some other TV shows I had on there. All of the other movies have an active download button so there is room for other movies, just not that one for some reason...weird!

Hello, i recently bought an iPod 5th Generation and it came with a passcode which i did not know of, it is now disabled and i am wondering how to unlock the iPod

Hello, i recently bought an ipod touch 5th generation and it came with a passcode which i did not know, it is now disabled and i am wondering on how to unlock it using itunes on the computer

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
However, you will likely run again the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
You either have to get the Apple ID and password of the previous owner and enter it or have them remove the iPod from their account.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account

DSO with flag "SIDs Generation upon Activation" deactivated

Situation 1:
I am using a standard DSO. The flag "SIDs Generation upon Activation" is not set. Note 1392715 states:
"... If you deactivate this flag, reporting is still possible since missing SIDS will be created during the query runtime from 7.0..."
Question 1:
What is about characterstic values with already existing SIDS? Are they selected at query runtime? Are SIDS created during query runtime for all characteristic values, even if the characteristic value has got a physical SID in its master table? Gets a query on this DSO faster, when pyhsical SID will exist in the respect master tables?
Situation 2:
I am using an infoobject with flag "attribute only" in a standard DSO. The flag "SIDs Generation upon Activation" is not set in this DSO. This DSO is connected to a virtual virtual provider based on DTP. The query Q1 on the virtual provider reports the infobject with the flag "attribute only". The query Q2 on the DSO doe not report the infoobject with the flag "attribute only".
Question 2:
What is faster? A query on a virtual provider or a query on a DSO with flag "SID Generation upon Activation" is not set.

Hi,
Question 1:
What is about characterstic values with already existing SIDS? Are they selected at query runtime? Are SIDS created during query runtime for all characteristic values, even if the characteristic value has got a physical SID in its master table? Gets a query on this DSO faster, when pyhsical SID will exist in the respect master tables?
1. There will be there at base tables. Query runtime it won't select sids.
i think no, it creates sid for the records which don't have sid.
along with sid, its depend on the selections/filters/data volume on dso.
Question 2:
Query will be faster on dso. because virtual provider pulls data during report excution and may take more time than reporting on dso.
Thanks

HT4623 Hello! So I have a iPod 5th generation, and I just had a recent update, it was for iOS 6.1.3, and now for some reason, I can't get the iOS 7 update. Could anyone help me?

Hello! So I have a iPod 5th generation, and I just had a recent update, it was for iOS 6.1.3, and now for some reason, I can't get the iOS 7 update. Could anyone help me?

Apple's servers are slammed right now with iOS 7 downloads AND activation requests.
Be patient and try again later.

Enhance LIS Datasource

Hi friends,
Please tell he how to add fields in LIS datasource
I want to add movement type and order type in 0PUR_C01 cube please tell me how to do this.
Thanks,
vish

hi,
Follow the below steps.
1)Go to RSA6 and find the data source you need to enhance.--> Display
2)Double click on the Extract structure.
3)Now click on the append structure button to add the required field on to the existing structure.
4) add your required fields with ZZ appended to your field.
5) Save & Activate the append structure. Then go back and make sure you activate the extract structure also.
6) Now again go back to RSA6 and select your Data Source. But this time go to change Data Source to remove the hide option to the enhanced fields. By default theyll be in hide mode. If you dont remove the hide field then this field will not be seen in BW side.
7) Now go to SE38 to write the logic to populate the data into the enhanced field. Program name to write the logic is ZXRSAU01.
8) Check + Save + Activate.
9) Check in RSA3 if data is populated as per your requirement.
10) Replicate your Data Source.
11) Now go to Data Source/ Trans. Structure screen. Now you can see the enhanced field on the right hand side.
R/3 Side:
Follow the above steps and the enhancement will be RSAP0001:
1.     ZXRSAU01  Transaction Data
2.     ZXRSAU02  Master Data (ATTR).
3.     ZXRSAU03  Master Data (TEXT).
4.     ZXRSAU04  Hierarchies.
Also check the below links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
also please see these threads
Enhancements
Re: enhancements
Regards, Siva

Installation of Business content and activation

Hello,
Our Source system is ECC 6.0 and
BW :NW2004 S and SAP NetWeaver BI 7.0 .
We are able to create source system conection successfully . after installing the business content and replication, all the data souces in BW are still in Version D only. Do i need to select each DS individually to activate ? or am i missing any steps ?
Any help is highly appreciated ?
Regards

Hi,
I was also passed this latest information from my colleagues in Product Management.
The method I explained is the old method for activating DataSources and extractors. It is still valid in SAP NetWeaver 2004s but there is a new, and easier, methid to do this now.
Also if you have followed my instructions, there is an additional change in the replication process and a decision you must make:
"Once the customer has activated the DataSource via rsa5 in source system, then he/she needs to replicate this datasource to BI. During the replication, he/she is asked via pop-up whether he would like to replicate these datasources as 3.X DataSource or 7.0.x DataSource.
If he decides to replicate these datasources as 7.0.x DataSources, then the A version of this datasource will be seen in table RSDS, instead of the original table RSOLTPSOURCE.
So if the customer checked table RSOLTPSOURCE, then he/she only see the D version.
This could be the reason that customer still only see D version after the datasource replication."
The new method is:
"- If you have a 3.X datasource, during the source system connection, the D
version of DataSource is already replicated into BI.
- With transaction RSOR in BI, you need to select the related transfer rule, and via transfer rule you are able to collect the 3.X DataSource.
- Then you need to push 'install' button to activate this datasource.
- After activation, the A version of DataSource will be available in BI and in Source system.
- If you have a 7.0.x DataSource, the steps are the same like 3.X datasource. But via transaction RSOR you are able to directly select this datasource (object type RSDS).
So with BI capabilities of NetWeaver2004s technology, it's no longer nessary to run rsa5 in the source system to activate the datasource."
I hope this helps,
Mike.

Datasource is not active in BI though source system has active DS

Hi,
I have three datasources which are active in source system.
i had replicated all these three datasources into BI system...
But even after replication for all the three datasources M version is different from A version..
I cannot activate manually all these datasource in production system as it is allowed only for display purposes..
how can i make these datasources active?

Hi Srini,
The worrying point is i had never done that like before..
I always transport datasource in R/3 side first and then replicate to BI systems and using directly..
since the source systems assigned to it are different ( In BI Dev system R/3 source system and in BI production source system is ofcourse is R/3 production..)
Is it Ok even if the dataasources had different source systems? when transporting from dev to prodution?

Lis datasources , INIT loads,

Hi,
i am working on BI7, and v are using some lis datasources like 2lis_02_s013 and
2lis_02_s017 , I want to do init load with data transfer option and after that create delta loads to be used in process chains, i am geeting errors saying that datasources is till updating in sources system for init load
please guide me in this regard,
plz send ur answers to [email protected]
or
[email protected]
correct answers will be awarded points

Hi,
You can use the infopackage to create the init load on the datasource and transfer the data to PSA and from there you can transfer the data into data targets using DTPs either you can go with full update or you can load the deltas from here again.
Creating init loads, and then deltas is all done in the datasource tree where you create the infopackage to extract the data from the source system to BW system.
REgards.

I had an ipod touch 4th generation and then I switched to the 5th generation, but kept the same icloud account. now it won't let me sign into my imessage with that account on my new ipod

I had an ipod touch 4th generation and then I switched to the 5th generation, but kept the same icloud account. Now it won't let me sign into my imessage with that account on my new ipod 5. Whenever I try to sign in it says try checking network connection.

iOS: Troubleshooting FaceTime and iMessage activation
FaceTime, Game Center, Messages: Troubleshooting sign in issues

LIS datasources generation and activation

Similar Messages

Maybe you are looking for