LIS S001 updating

Hi,
The new documents are getting updated in table s001 but not into tables s001bw1 and s001bw2. Also while updating its giving updating error but the doc is saved in table s001. Can any 1 tell me in depth abt those 2 tables...how r they populated and the rules to update them and where can b problem while document posting.
Thanks
Prashant

hi
Asynchronous updating will update those tables only when the system resource is rarely used..that is night time.............only synchronous update will update those tables immediately...that is the reason for not updating those tables...might be after few hours or later it may updated
Regards
N Ganesh

Similar Messages

LIS S001

Hello Experts
i am facing a problem when i am generating S001 in LBW0. when i say generate i am getting error 040 The LIS environment is setup incorrectly. Then when i selected the option SET UP ENVIRONMENT and generated i am getting error saying (error 008 LIS Environment: Generation not possible in SAP Name range). can anyone please help me to generate S001. Thanks

Hi,
I hope, the foolowing link will help you to sort out this problem.
Re: Lis Environment
With rgds,
Anil Kumar Sharma . P

Updating previous data for LIS Infostructure

Hi,
Initially LIS statstics update Indicator is not set for Process Order Types in our systems, But now I have activativated this, but it is updating only data from current date.
Is there any procedure to update past data in LIS Info structures.i.e what are Infostructures to be updated and what is transaction code for same.

Dear,
Please refer this link,
[Past Data not updting in Info structure |Past Data not updting in Info structure]
Regards,
R.Brahmankar

Report generation and Info Structure updation

Hi
When are the Tables: S094 and other info structures gets updated?? For Example S094 is updated with materials and has the stock details and it have Goods issue MRP Goods issue Valuation etcu2026 I tried creating a material and created a PIR and run MRP for it and checked the tables its not updated in the S094 table.
Also I am not able to execute Transaction MCEC and MCEA transaction for generating reports for LTP run.
Is there any configurations that has to be done for the above??? Like the LIS (Logistics information system settings) that has to be done for generating the above reports.

Hi,
See different links about LIS :
What's an infostructure ? : http://help.sap.com/saphelp_47x200/helpdata/en/bd/a140eb44d511d188fe0000e8322f96/frameset.htm
Events Updating in SIS : http://help.sap.com/saphelp_47x200/helpdata/en/c1/3756d5449a11d188fe0000e8322f96/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/c1/3756d5449a11d188fe0000e8322f96/frameset.htm
For SIS, all documents (if custo is activated) can update LIS :
- Sales order --> Event : VA
- Delivery --> Event : VC
- Invoice --> Event : VD
If you look at the custo of update rules for the standard analysis S001, you can see the link between key figures and event --> Tcode : MC26 for Infostructure S001 / Update group 1)
Regards,
Lionel

Info structure - Updation of info structure.

Hi All,
I am new to info structure concept. Can someone help me out with the below query.
I have a infostructure S998, for ISU sales statics. I can see a tranparent table corresponding to the same S998.
This info structure has a date (BIS) as a characteristci field. the same field is seen in table S998. I am supposed to find out how is this field "BIS" in table S998 updated. Could someone guide me how to check the updation of this field?
Regards,
Suchitra.

Hi,
See different links about LIS :
What's an infostructure ? : http://help.sap.com/saphelp_47x200/helpdata/en/bd/a140eb44d511d188fe0000e8322f96/frameset.htm
Events Updating in SIS : http://help.sap.com/saphelp_47x200/helpdata/en/c1/3756d5449a11d188fe0000e8322f96/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/c1/3756d5449a11d188fe0000e8322f96/frameset.htm
For SIS, all documents (if custo is activated) can update LIS :
- Sales order --> Event : VA
- Delivery --> Event : VC
- Invoice --> Event : VD
If you look at the custo of update rules for the standard analysis S001, you can see the link between key figures and event --> Tcode : MC26 for Infostructure S001 / Update group 1)
Regards,
Lionel

Info structures update

Hi!
I'm new to info structures (I'm otherwise ABAPer) and I'm probably not posting this question on the right forum. If so, please redirect me.
Anyway, here's the question:
How do I set an info structure to be filled with data on certain actions? My first idea (as ABAPer) is to use brutal force like user-exit and direct table insert. But I suppose that info structures were not ment to be treated this way, because otherwise they wouldn't differ from Z* tables. Does anyone know the proper way to do this(or proper forum for this question)?
Kind regards,
Igor Barbaric
SAP Consultant (ABAP)
Kaufland Croatia

Our LIS structures were set up by the implementation team so I'm getting this second hand by looking at SPRO. I have loaded them and made mods in the past. I'll tell you what I can.
We use LIS to capture order and sales data. I'm not familiar with the event you're talking about but it is likely in there some place. I'll tell you what I can about how mine is set up and maybe you can get a clue therein. I must say that is is one area of SAP that I really dislike. Very complicated and documentation is hard to find.
I'm not sure how far you are but if you've managed to build an infostructure (it should be an empty transparent table. ex. S501) then let's see if just turning on the update is all you need. If not, we'll have to look at the structure and update rules.
See the section under LIS called Updating/Updating Control. Run the Activate Update tran, select the area you data comes from, and take a peek at that list. For each structure, there is an update control. It shows the level up rollup of the data (daily, monthly, etc.) I believe. IN the updating section, you'll see update methods K 1 2 3. K is "OFF", no updates. 1 is synchronous (V1 update, transaction save waits until LIS is updated), 2 is async (V2 update, transaction requests an update but let's it run async), 3 is the same as 2 accept that the update is scheduled differently. Just check the F1 help on each of these radio buttons.
Once you turn on an update, your transaction should spawn an entry into the LIS structure if all went well.
See if that clue gives you a boost. If not, let me know what specific questions you have and I'll try to assist.

Question About the New Update Due out this Month

Hi I would like to know when Apple, does come out with the New update this month will it be for the New iPhone, do out on June 9th,2008 or for the People who have the Old iPhone, that will then be out dated?
Thanks
Lisa*

Firmware update 2.0 will be for all existing iPhones, and for all iPod Touch(es), but iPod Touch owners must pay a nominal fee for the update due to accounting reasons.
Firmware update 2.0 will likely be pre-installed on the 2nd generation iPhone. If not, it can be installed as an update the same as for the first generation iPhone.
Updates for the first generation iPhone will not stop after the 2nd generation iPhone is released. Both will be running the same operating system, with the only hardware difference we know for certain included with the 2nd generation iPhone is a 3G chipset making it a 3G phone.
The first generation iPhone will not become outdated when the 2nd generation iPhone is released. There are some people in the U.S. that don't live in an area where at&t has 3G network coverage, and where at&t doesn't have plans to add 3G network coverage this year or the next.
You purchase a new computer this week, and a new and improved version of the same computer model is released within 6 months or a year. This doesn't make the computer you purchased this week outdated. The same applies to the iPhone.

Fill Lis tables

Hi,
-I've deleted lis tables S174 wit Tx (LBW2), after that i re-filled in Tx (OLI3) but when i executed RSA3 appears 0 records.
Please, which are the correct steps in order to delete the list table and re populated.
Regards

Hi,
LIS information structures are 'transperant tables'.
First check the records in LIS in SE16. If it is already containing records, then set LIS to noupdate (use the T-code mentioned below) and delete the whole contents of LIS.
To fill LIS, first set your LIS to update. use the central Tcode OMO1(for SD), OMO2(for MM) or OMO3(for other logistics) or you can set it in MC24 also(activate button).
SBIW -> settings for application specific datasources -> Logistics -> managing transfer information structures ->.... -> statistical setup Sales.
select the relevent one whether sales/billings/deliveries etc in the pop-up. enter your LIS, give a name to job and execute.
the statistical setup will be processed and your LIS will be filled up with hystorical records. these records will be in version '&(' i.e. statistical setup version. you can change the version to '000' and delete the version '&(' by clicking the 'change/delete version'on the pop-up when you come back.
LIS EXTRACTION
T.code - :MC18 create field catalog
1. Characteristic Catalog
Application-01-Sales and Distribution, 02-Purchasing, 03-Inventory Controlling, etc..
Catalog category 1. Characteristic catalog, 2. Key figures catalog 3. Date catalog
Select characteristic catalog and enter, click on characteristic select the source table and it will be display the relevant source field and select the source field, copy + close, copy.
Save, similarly create key figures catalog
T.code : MC21 create infostructure
Example
Inforstructure : S789
Application 01
Choose characteristic select the catalog, select the fields, copy + close
Choose key figures catalog select the key figures ,copy + close, save and generate
T.code MC24 create updating
Infostructure : S789
Update group : 01- Sales document, delivery, billing document ,enter
Select the key figures click on rules for key figures give suggest rules, copy save and generate
Click on updating (activate updating)
Select the infostructure set periodic split 1. Daily, 2. Week, 3. Month, 4. Posting period
Updating 1)No updating,2)Synchronous updating (V1), 3)As synchronous updating (V2), 4)As synchronous updating (V3),
T.code LBW0 - Connection of LIS Information structures to SAPBW
Information structure : S786
Select the radio button-Setup LIS environment and Execute.
Select the radio button-Generate data source and Execute.
For Delta update:
Select the radio button-Generate updating and Execute
Select the radio button -Activate / deactivate and Execute.
T.code SBIW Display IMG (implementation guide)
Setting for applications specific data source logistics Managing transfer information structure setup of statistical data applications specific setup of statistical data perform statistical setup sales.
Choose activity
Setup Orders, deliveries, billing
Choose the activities enter the infostructure (S789), give name of the run, date of termination, time of termination, No. of tolerated faulty documents. Then execute
T.code RSA3 Extractor checker
Give the data source name eg. 2LIS 01S789 and execute, result will get some records
Go to BW side replicate data source Assign infosource Create infocube Create update rules create infopackage and schedule the package with initialize delta process.
For delta update :
In R/3 side
T.code MC25, set update (V1) or (V2) or (V3)
T.code LBW0, choose generate updating and execute then choose activate / deactivate and execute
BW side - create infopackage and schedule the package with delta update.
First time if your scheduling the infopackage -in R/3 side T.code :MC25 -Udating set to No update,insted of selecting the update V1,V2,V3.
If your doing the Delta update:in R/3 side T.code :MC25-Updating set to either V1 or V2 or V3. and the to T.code :LBW0 -Select the radio button Active/deactivate and Execute.
and schedule the infopackage with delta update.
Hareesh

BI 7.0 Certification Query

Dear Gurus,
I am giving certification exam in a short while. I have a list of Questions which i would like to ask with reference to BI 7.0. Dont dont have to answer all the questions, just answer what you know. I would be realy grateful:
1: Which of the following refer to pointer tables that provide the technical link to the master
data outside of the InfoCube?
a. Dimension tables
b. Set IDs
c. M tables
d. SID tables
e. ODS transparent tables
2: Which of the following statements describes a categorical dimension?
a. An artificial dimension used to describe the status of another dimension
b. An artificial dimension/attribute used to categorize another dimension
c. An artificial dimension used in a reporting scenario where the comparison of the
same key figure is needed
d. A dimension that is used across all cubes
e. None of the above
3: Which of the following is an example of a slowly changing dimension?
a. Customer on a sales order
b. Date
c. Person responsible for a cost center
d. Value of a purchase order
e. None of the above
4: Which of the following occurs as a result of degenerating dimensions?
a. The grain of the fact table represents actual working documents like order number
or invoice number
b. All descriptive attributes of the grain are located in other dimensions
c. The InfoCube becomes very weak and performs poorly when it is run
d. The degenerating dimensions cannot be modeled using normal star schema
e. None of the above
5: Which of the following describes an unbalanced hierarchy?
a. A hierarchy with too many leaves within one branch
b. A hierarchy with fewer nodes within one or more branches
c. Hierarchy without leaves
d. The term used for data that are delivered from two or more sources on different aggregation
levels
e. None of the above
6: Which of the following represents a characteristic that spans an entire data model and
upon which all other entities are dependent?
a. Many-to-many relationship
b. A degenerated characteristic
c. A strong entity
d. An attribute
e. A data model characteristic
7: When should an attribute be placed in a separate dimension?
a. Always
b. If the attribute changes frequently
c. If the attributes have a large number of distinct values
d. Never
e. None of the above
8: Which of the following objects keeps the aggregate and InfoCube in sync?
a. Dim pointer
b. Read pointer
c. SID pointers
d. Surrogate pointer
e. None of the above
f. All of the above
9: Which of the following statements are not correct about the PSA?
a. Created for each communication structure
b. Transfer rules have been applied
c. You can load from the PSA to an InfoCube
d. Queries can be generated from the PSA
e. None of the above
10: In which case can you not use aggregates in SAP BW?
a. Attributes of time-dependent characteristics
b. Slowly changing dimensions
c. Hierarchy structure
d. Degenerate dimension
e. None of the above
11: What does the Data Changes Aggregate Update Program do?
a. Activate all hierarchies and attributes
b. Generate all aggregates affected with a new change ID
c. Set the pointers to the right change ID
d. Roll up all aggregates that have been changed since the last update
e. None of the above
12: Which of the following are correct concerning CO/PA?
a. Summarization levels for an operating concern have the same function as aggregates
for an InfoCube
b. CO/PA summarization levels are managed by the InfoCube, and always contain the
same numbers as the InfoCube that they are based on
c. Characteristics in CO/PA correspond to the characteristics in InfoCubes
d. The value fields in CO/PA can be regarded as key figures with additional summarization
in each characteristic
e. Line items in CO/PA can be compared to line items in the ODS
13: For what type of CO/PA data source can selection criteria be used to implement a delta
scenario?
a. Cost based
b. Time based
c. Account based
d. Value based
e. None of the above
14: Which of the following tables can be created for a ledger in FI/SL?
This question has only one answer.
a. Aggregate tables
b. InfoCube level tables
c. Line item level tables
d. Summarization level tables
e. Totals tables
15: Which of the following data is it better to load first?
a. Attributes
b. Hierarchies
c. It does not matter
d. Text
e. Transactional data
f. None of the above
16: In which of the following do you specify TRFC or IDOCs?
a. Transfer method tab
b. Update rules
c. Transfer rules
d. BEx Analyzer
e. None of the above
17: Which of the following describes a Result Set query?
a. A nested query where the results of a first query are used as entry values for a second
query
b. A query using flat tables (ODS object or InfoObject)
c. A prequery
d. There is no such thing in SAP BW
e. None of the above
18: What step do CO/PA, LO extraction, and LIS extraction methods have in common when
setting up delta management of uploads?
a. On the scheduler you activate a full upload
b. On the scheduler you initialize the delta upload
c. Setup of delta tables
d. The delta is managed in the service API
e. The InfoStructure tables are used
f. VBDATA and ARFCSDATA tables
19: What is the procedure for the LIS delta update?
a. There is no delta update in LIS
b. u201CGenerate updatingu201D regenerates the update program and ensures that a delta update
is possible
c. Activate u201Cdelta updating in the LISu201D setting in the report u201CRMCSBIWCu201D
d. The active delta table is defined in u201CTMCBIWu201D
e. None of the above
20: According to which of the following levels can the DataSource replication occur?
a. Application component
b. DataSource
c. Extract routines
d. Hierarchies
e. Source system
Would be really grateful.
Regards,
Shahzad

Hi,
Some confirm answers from my side:-
1: Which of the following refer to pointer tables that provide the technical link to the master data outside of the InfoCube?
a. Dimension tables b. Set IDs c. M tables d. SID tables e. ODS transparent tables
2: Which of the following statements describes a categorical dimension? a. An artificial dimension used to describe the status of another dimension b. An artificial dimension/attribute used to categorize another dimension c. An artificial dimension used in a reporting scenario where the comparison of the same key figure is needed d. A dimension that is used across all cubes e. None of the above
3: Which of the following is an example of a slowly changing dimension?
a. Customer on a sales order b. Date c. Person responsible for a cost center d. Value of a purchase order e. None of the above
4: Which of the following occurs as a result of degenerating dimensions? a. The grain of the fact table represents actual working documents like order number or invoice number b. All descriptive attributes of the grain are located in other dimensions c. The InfoCube becomes very weak and performs poorly when it is run d. The degenerating dimensions cannot be modeled using normal star schema e. None of the above
5: Which of the following describes an unbalanced hierarchy? a. A hierarchy with too many leaves within one branch b. A hierarchy with fewer nodes within one or more branches c. Hierarchy without leaves d. The term used for data that are delivered from two or more sources on different aggregation levels e. None of the above
6: Which of the following represents a characteristic that spans an entire data model and upon which all other entities are dependent? a. Many-to-many relationship b. A degenerated characteristic c. A strong entity d. An attribute e. A data model characteristic
7: When should an attribute be placed in a separate dimension? a. Always b. If the attribute changes frequently c. If the attributes have a large number of distinct values d. Never e. None of the above
8: Which of the following objects keeps the aggregate and InfoCube in sync? a. Dim pointer b. Read pointer c. SID pointers d. Surrogate pointer e. None of the above f. All of the above
9: Which of the following statements are not correct about the PSA? a. Created for each communication structure b. Transfer rules have been applied c. You can load from the PSA to an InfoCube d. Queries can be generated from the PSA e. None of the above
10: In which case can you not use aggregates in SAP BW? a. Attributes of time-dependent characteristics b. Slowly changing dimensions c. Hierarchy structure d. Degenerate dimension e. None of the above
11: What does the Data Changes Aggregate Update Program do? a. Activate all hierarchies and attributes b. Generate all aggregates affected with a new change ID c. Set the pointers to the right change ID d. Roll up all aggregates that have been changed since the last update e. None of the above
12: Which of the following are correct concerning CO/PA? a. Summarization levels for an operating concern have the same function as aggregates for an InfoCube b. CO/PA summarization levels are managed by the InfoCube, and always contain the same numbers as the InfoCube that they are based on c. Characteristics in CO/PA correspond to the characteristics in InfoCubes d. The value fields in CO/PA can be regarded as key figures with additional summarization in each characteristic e. Line items in CO/PA can be compared to line items in the ODS
13: For what type of CO/PA data source can selection criteria be used to implement a delta scenario? a. Cost based b. Time based c. Account based d. Value based e. None of the above
14: Which of the following tables can be created for a ledger in FI/SL? This question has only one answer. a. Aggregate tables b. InfoCube level tables c. Line item level tables d. Summarization level tables e. Totals tables
15: Which of the following data is it better to load first? a. Attributes b. Hierarchies c. It does not matter d. Text e. Transactional data f. None of the above
16: In which of the following do you specify TRFC or IDOCs? a. Transfer method tab b. Update rules c. Transfer rules d. BEx Analyzer e. None of the above
17: Which of the following describes a Result Set query? a. A nested query where the results of a first query are used as entry values for a second query b. A query using flat tables (ODS object or InfoObject) c. A prequery d. There is no such thing in SAP BW e. None of the above
18: What step do CO/PA, LO extraction, and LIS extraction methods have in common when setting up delta management of uploads? a. On the scheduler you activate a full upload b. On the scheduler you initialize the delta upload c. Setup of delta tables d. The delta is managed in the service API e. The InfoStructure tables are used f. VBDATA and ARFCSDATA tables
19: What is the procedure for the LIS delta update? a. There is no delta update in LIS b. u201CGenerate updatingu201D regenerates the update program and ensures that a delta update is possible c. Activate u201Cdelta updating in the LISu201D setting in the report u201CRMCSBIWCu201D d. The active delta table is defined in u201CTMCBIWu201D e. None of the above
20: According to which of the following levels can the DataSource replication occur? a. Application component b. DataSource c. Extract routines d. Hierarchies e. Source system
Regards,
Prakash

PGI Concept?

Hi,
Does PGI creates any accounting document?
Also I would like to know that PGI means that the delivery is complete and the goods are issued to the customer.Please suggest if my concept of PGI is correct?

Owen Dun, senior SAP Specialist for Publicly Traded Corporations
The complete concepts of PGI are provided as follows:
PGI - Stands for “Post Goods Issue”. It is a significant phase in the Sales Order processing. In its simplest form, it is a confirmation of delivered quantity. PGI is the final step of the delivery/shipment processing; it is the stage where the ownership of the goods transfer to the customer and the stock is being updated. PGI transfers the ownership of the material to the customer; accordingly, your company’s Inventory reduces – it signifies the end of the delivery processes. At PGI, there is integration with Inventory Management by reducing the inventory stock quantity and the related Material document reflects the stock quantity update. Likewise, it also triggers integration with FICO by reducing the stock value and the Accounting document reflects the stock value update. There are some activities that will happen after the PGI of the delivery document of the Sales Order. They are:
1. Reducing warehouse stock & updating inventory management.
2. Posting the value change to the stock accounts in the inventory account.
3. Reducing the delivery requirement.
4. Updating the document flow and status of the preceding document.
5. Creating work list for billing due list.
During PGI, the stock status and accounting entry is passed into MM and FI modules for updating. The accounting entries are follows:
Cost of goods sold …………DR. $ xx,xxx
Inventory …………………….CR. $ xx,xxx
Once PGI is performed, stock reduces from the companies stock and the delivery is completed. No longer have the goods remained as the property of the company, as soon as PGI is done.
***For Advanced SAP users:
During PGI your inventory is getting reduced or shipped to the customer using movement type 601. When conducting PGI, these documents will be generated by the following t-codes:
1. Material Document (MB03)
2. Financial Document (FB03)
3. Co Document (KSB61)
One can create a delivery today and SAVE it WITHOUT doing PGI. Then, after a few days, one can go to VL02N & do the PGI. One can also do Partial PGIs under VL06. PGI can be reversed by using the t-code vl09n. One can create a Proforma Invoice from Delivery Document before PGI & then create actual Invoice after doing PGI. For Proforma Invoice before PGI, one can follow this path:
IMG –> Sales and Distribution –> Billing –> Billing Documents –> Maintain Copying Control For Billing Documents –> Copying control: Delivery document to billing document.
Here, select the Delivery & Billing Type & at Header Level in Copying requirements insert routine 11 – Head.dlv-rel.w/o GI. No other setting is required for Delivery to actual Invoice. Movement type is assigned to the schedule line of the line item & 601 movement type is used for PGI.
Note: in the case of Inventory Consignment, in the stage of ‘fill up’ delivery, when you post goods issue via 631 movement, neither accounting document nor material document will be generated because you are just moving your stock from one place to another (from unrestricted to special stock). In the later stage where you generate ‘issue’ delivery via 633 movement, both the above documents will then be generated.
In conclusion, PGI has the following effects on SAP:
1. Billing Due list is updated.
2. Inventory quantity / valuation are updated including material planning.
3. LIS is updated.
4. Updated the Document flow in Sales Documents.
Hope that this document can provide you with some insights on how SAP's PGI works.
Owen Dun, senior SAP Specialist for Publicly Traded Corporations

Errors in IDOC transfer method.....

Hi
I am loading customer data ( LIS , S001) by using transfer method as IDOC. now i got 4 error records. so how do we rectify in IDOC method. i can use PSA also, so that its very easy to rectify errors. But how do we rectify the error records in IDOC method...., any idea gurus......,
Regards
swetha

Looks to me like you're not telling the linker to create a library (DLL). I'm not familiar with Linux, but clearly if the linker if looking for 'main' then its trying to build an executable.

LO extraction VS Generic

Hi everyone, a general question as I'm new SAP BW world
which extraction method is used most in the market
2nd question is we use Generic to Extract data from two or more tables but I can also use generic for one table (I think not because that's why we have LO ?)
Let me know, thanks Dave

Hi..
in Application Specific there are two divison..
<b>Customer Generated Extractors and
BW Content Extractors in this LO COCKPIT</b>
Cross Application-----Generic Extractors.. in this we have db view ..info set and function module
Logistics Customizing Cockpit provides a simplified way to extract logistics data and transfer it to SAP Business Information Warehouse.
As shown in the figure the document data for various applications like Customer order, delivery and billing is first transferred to various Communication Structures.
These communication structures are used to form various extract structures in R/3 which consist of various DataSources like 2LIS_11_VAHDR, 2LIS_11_VAITM etc.
These DataSources then can be replicated to BW and assigned to Infosources.
Then by creating transfer rules and update rules and defining the transformation the data is loaded into various data targets like InfoCube and ODS, thus available for reporting.
There are four Update Modes in LO Extraction
Serialized V3 Update
Direct Delta
Queued Delta
Un-serialized V3 Update
Simple Handling
BW Customizing Cockpit: Central, single, maintenance tool for Logistics applications No LIS functionality: No knowledge of LIS Customizing update settings, etc, required
Function enhancement: Creating simply and without modifications
Others
Delta tables (SnnnBIW1/-2): duplicated update, duplicated data storage
Generic Extractors are Cross Application Extractors used in scenarios where the other type of extractors are unavailable.
Generic extractors are of three types:
Based on Database view/Table
Based on InfoSet
Based on Function Module
When should you use generic extractors should be used ...
Business Content does not contain a DataSource for your application.
The application does not feature its own generic delta extraction method
You are using your own programs in SAP R/3 to populate the tables
The tools for generic data extraction can be used to generate an extractor for all applications.
with regards,

Logistic information system

Is there any thing required to activate the standard PP reports in Logistic information system.

Hi,
To activate LIS do the following step:
System-user profile-Own Data--Parameters
Enter the following ID:
PARAMETER ID : MCL
PARAMETER VALUE : X
SHORT TEXT : LIS:Statistics update log switched on/off
Regards
Vinod

How to fill setup table for Application 18 Customer services

Hi,
How can I fill setup table for application 18.
Regards,
ST

Hi,
To fill LIS, first set your LIS to update. use the central Tcode OMO1(for SD), OMO2(for MM) or OMO3(for other logistics) or you can set it in MC24 also(activate button).
SBIW -> settings for application specific datasources -> Logistics -> managing transfer information structures ->.... -> statistical setup Sales. (Application component 17 >transaction OLIIBW,Application component 18> OLISBW )-->select the relevent one whether sales/billings/deliveries etc in the pop-up. enter your LIS, give a name to job and execute.
Also pls chk this;
Re: query on setup table filling
Regards
CSM Reddy

How SAP determines Delta records?

Dear Experts,
I have a standard extractor 2LIS_02_ITM. It works like this.
1. when a sales order is saved, a customized program creates a new PO and updates a field in the PO using direct update, the abap 'update' command.
2. in BI, this record created is loaded as delta.
3. We notice that sometimes this when delta loaded, this field is blank and sometimes its not.
A. We suspect the delta did not capture program-created PO if this field value is populated as blank by the program.
B. If the program-created PO is opened and edited by user and then saved, SAP would generate a Delta record?
If this delta is created and BI reloads delta, this delta would be loaded into BI and the report would show the field value.
So, I need to check with experts here if using customized program to create a PO and update a field in it at the same time, would this be captured by the Delta mechanism?
Normally, if manually created, the PO would, i assume, be captured in the delta queue. But what about using program?
Please advise how delta is or can be affected by programs and how exactly is delta determined in this case. This standard extractor is set to use delta, i think using numeric field.
So, I am not sure if its due to R/3 or BW. For BW, its a direct mapping of the updated field. So, I do not think there is an issue on BW side.
regards
Pascal

Dear Debjani,
On your reply to point 2 about the timing of LIS V3 update run, I like to seek clarification how the timing could cause the problem given that many delta records have successfully been loaded with existing way where a collection run is scheduled to run every around 15 minutes and is able to capture the delta except in some cases which is the problem? How can the field value change be missed due to this? On your point 3 reply, the PO is created by program and it can be created by user.
I still require some clarification . Hope you can kindly bear with me.
1. For most of the delta records loaded into BI from R/3, there is no problem with the data. The program-created PO records can be loaded. But for some cases, even when this field is populated by program or EDI, after auto-creation of the PO. This delta is loaded into BI with this field being blank.
2. This suggests to me, for most cases of the auto-PO creation, the BI Delta mechanism in R/3 is able to handle PO created by automated program in R/3.
3. So, seems to me, regardless of how the PO is created : user created / by program / by EDI, the delta mechanism seems to work. So, I like to learn more how exactly can TIMING difference (asynchronous) between the creation of PO records and the LIS V3 update delta queue creation batch job have resulted in the field update from not being extracted into the delta queue ?
Solutions (i think):
1. Is it possible to Change the current delta queue update extraction method from periodic (every x minutes) V3 update batch run to the Direct / Unserialised V3 update extraction method as mentioned by Arvind earlier? Would this mean every time PO is created by any means, even by program or field updated by EDI, the delta queue is immediately created to capture the change? This sounds like a solution?
2. Have the auto-PO creation program Trigger an R/3 event to run the V3 update whenever it has completed an update or PO creation to generate the delta queue. Would this load the r/3 too much if run frequently? Or since frequent run would mean also less delta queue created which means shorter run time?
Dear Sven,
would it be good idea to use the program for ME22N to update the particular field After the PO is auto-created by the ME21N program? Would this mean, using these programs will assure that delta is captured?
Best regards
Pascal
Edited by: Pascal Gabin on May 11, 2011 9:24 AM

LIS S001 updating

Similar Messages

Maybe you are looking for