LIS -- S021 is not updated...
Hello.
I use S021 data in add-on program.
This table data is asynchronous updating.
I have trouble that,
"Basic start date"(GSTRP) and "Basic finish date"(GLTRP) is not updated.
I tried updating productution order, but these field not updated.
Does someone know how to updating these field?
P.S. Another fields are updated.
T.Kaita in Japan.
Hi,
Please go through the Following link:
http://www.sap123.com/showthread.php?t=11..
Hope this helps..
Regards,
Siva
Similar Messages
-
Dear Gurus,
I have configure LIS, where maintain all the combination with 1 and 2.
At the time of return system cant reduce the sales value in the report, it will remain unchanged, cant show the data in report MC+I.
please suggest what factor I am missing.
Regards,
Imrandoes anybody else have any suggestions ? i don't know what safe mode is and if that is taking all my security down sorry not running my internet w/out security. my question has been here forever nobody knows ?
-
RMCVNEUF....billing document not updating
The business recently made a change to the Item Categories that update LIS/SIS. They want us to load all historical documents with this Item Category to our SIS structures and DW. There was a change made to RMCVNEUF to allow for us to search all billing documents where Item Category = NLC, allowing us to use the statistical updating program to load only the historical documents wanted.
As a test, I found on NLC document and run it thru RMCVNEUF. I have checked the Redetermine Update Group check box. I get a message back saying: Data from billing document 9000878658 was not updated
Message no. M2210
Diagnosis
Data from documents used as a basis is required for the processing of billing documents.
System Response
The data in the billing document 9000878658 will not be updated
System Response
Ensure that all sales orders and delivery notes are processed before the billing documents.
NLC item category is now configured in SPRO to be statistically relevant. Why would this not update using RMCVNEUF? Config was changed on 4/16/10 to allow for NLC to update. It seems any document created with this item category prior to that date will not be updated using RMCVNEUF? Any ideas? Not sure of a better/easier way to get only the documents we want to load to SIS and then DW.
Thank you
TheresaNote 142349 says
Summary
Symptom
If in the statistical setup of the sales information system you select option 'Redetermine update group', the following error messages may occur:M2206, M2207, M2208, M2209, M2210, M2211.
The documents specified in the messages may be displayed correctly during an update simulation.
Additional key words
OLI8, OLI9, RMCVNEUL, RMCVNEUF
Cause and prerequisites
During the redetermination of the update group in the reorganization, information from preceding documents is written to the intermediate tables MCVSRFK (document header) and MCVSRFP (document item), which are relevant for the determination of the update group of the subsequent documents.
Solution
To fill these intermediate tables, the reorganization of sales orders must be performed before the reorganization of deliveries or the reorganization of sales orders and deliveries must be performed before the reorganization of billing documents (in each case with option 'Redetermine update group'.
Note
After the successful reorganization the above-mentioned help tables should be deleted with report RMCVNEDE to avoid uneccessary data collection and the increasing loss in performance during the following reorganization runs.
thanks
G. Lakshmipathi -
RMCVNEUF - document not updated
The business recently made a change to the Item Categories that update LIS/SIS. They want us to load all historical documents with this Item Category to our SIS structures and DW. There was a change made to RMCVNEUF to allow for us to search all billing documents where Item Category = NLC, allowing us to use the statistical updating program to load only the historical documents wanted.
As a test, I found on NLC document and run it thru RMCVNEUF. I have checked the Redetermine Update Group check box. I get a message back saying: Data from billing document 9000878658 was not updated
Message no. M2210
Diagnosis
Data from documents used as a basis is required for the processing of billing documents.
System Response
The data in the billing document 9000878658 will not be updated
System Response
Ensure that all sales orders and delivery notes are processed before the billing documents.
NLC item category is now configured in SPRO to be statistically relevant. Why would this not update using RMCVNEUF? Config was changed on 4/16/10 to allow for NLC to update. It seems any document created with this item category prior to that date will not be updated using RMCVNEUF? Any ideas? Not sure of a better/easier way to get only the documents we want to load to SIS and then DW.
Thank you
TheresaHi Cathy,
It is genrated profit center document also but its not updated in Consolidation (Profit center dimension). If u have idea about this please help me.
Thanks
K.Satish -
User profile service not updating 'Title' in user information list
Hi,
In our SharePoint farm, following two user profile sync timer jobs are successfully running but not updating the 'Title' in the hidden user information list.
User Profile to SharePoint Full Synchronization
User Profile to SharePoint Quick Synchronization.
Can someone point me to the right direction? Please note that I don't want to use powershell script shown here to update the 'Title' in the user information list -
http://blog.falchionconsulting.com/index.php/2011/12/updating-sharepoint-2010-user-information/.
Thanks,
Manvir
ManvirHi,
There are two jobs, User Profile to SharePoint Quick Sync and User Profile to SharePoint Full Sync, that synchronize the User Profile database information with the user information list. Sometimes this stops working (properly) and in that case
you need to run:
Stsadm.exe –o sync –listolddatabases 0
Stsadm.exe –o sync –deleteolddatabases 0
The first command will display all the databases and when they have been sync’d last.
The second command will delete the records corresponding to those databases (it doesn't delete databases/end user data).
Anyways, running this will basically tell the timer jobs that they have never sync’d and force them to carry on as if it’s the first time.
Go to Central Admin and fire off the User Profile to SharePoint Full Synchronization
job.
For detailed information, refer to the following article:
https://donalconlon.wordpress.com/2012/03/02/sharepoint-user-information-list-is-not-being-updated/
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Dear all,
I am creating one info structure containing Customer Group is added to characteristics.
But when i am updating the info structure then it dosenot update.
Can u plz send me the detail customization for creating new infostructure.
Also why it is not updating?
Plz sent me the details regarding the same.
Thanks & Regards,
PMGoto OMO1 tcode and select ur info structure and double click on it and sel;ect the radio button "synchronus updating" and check.
compare ur settings with the below configuration.
please gothough this config
IMG menu path for SIS: IMG>Logistics General>Logistics Information System (LIS)
Figure 1: IMG menu path for SIS configuration steps
Task 1: Create Self-Defined Information Structure
Use transaction code MC21 (menu path Logistics Data Warehouse>Data Basis>Information Structures>Maintain self-defined information structures> Create) to create a Self-Defined Information Structure. Give a customer-range number 990 (any available number between 501 and 999). To make it easier, use copy from to copy structure from S001.
Figure 2: Create a Self-Defined Info Structure
Figure 3: Structure S990 is created as a copy of S001
Structure S990 is created as a copy of S001. Accordingly, you will see defaulted characteristics and key figures. Review various settings (unit, sum, etc.).
Add two more characteristics: Sales Order Number and Item Number.
Click on Choose Characteristics Icon and then click on Selection List icon to choose fields from field catalogs.
Choose field catalog SD: Bus transaction (order) by double-clicking it. Double-click on Sales Document and Sales document item from field catalog fields (you may need to scroll-down).
Figure 4: Choose fields Sales Document and Sales Document Item from Field Catalog
You can view technical names by toggling the Switch Display icon.
Figure 5: Switch display to view technical names
Make sure that you have selected correct characteristics as: MCVBAK-VBELN and MCVBAP-POSNR.
Click on Copy + Close icon and then click on Copy icon to accept the changes.
Review information
Double-click on characteristics and key figures to review technical information. This step is not mandatory, just for information.
Figure 6: Review technical field information for characteristics: Customer (KUNNR), Sales Order (VBELN), Item (POSNR) and Key figures: Incoming Order (AENETWR), Open Order (OAUWE)
System displays the generation log.
Figure 7: Generation log for Structure S990. Table S990E is Structural Information for Table S990
Task 2: Maintain Update Groups
SIS IMG>Logistics Data Warehouse>Updating>Updating Definition>General Definition Using Update Groups>Maintain Update Groups
Figure 8: Update Groups for Sales and Distribution
No new entries need to be created. You can use the existing system-delivered update groups. Use Update Group (UpdGrp) 1 for the standard order process of: SIS: Sales Document, Delivery, Billing Document and use UpdGrp 2 for the SIS: Returns, Returns Delivery, Credit Memo.
Task 3: Maintain Update Rules
SIS IMG>Logistics Data Warehouse>Updating>Updating Definition>Specific definition using Update Rules>Maintain Update Rules>Display
Info Structure S001 and Update Group 1.
Before we create update rules for S990, let's review how update rules are defined for S001. Review rules for Characteristics and key figures.
Figure 9: Update Rules for combination of Structure S001 and Update Group 1
Double-click to review specific details of the update rule for Key Figure Incoming Orders. Note that the event is VA Sales Order creation.
Figure 10: Update rules for Key Figure Incoming Orders
Figure 11: Characteristics for Incoming Orders
Similarly review details of Key Figure Sales. Note that the Invoiced Amount (Sales Amount) is updated by event VD Billing Document.
Figure 11: Update rules for Key Figure Sales
Figure 12: Characteristics for Sales
Similar to Update Rules of S001, we need to create Update Rules for our Self-Defined Structure S990.
SIS IMG>Logistics Data Warehouse>Updating>Updating Definition>Specific definition using Update Rules>Maintain Update Rules>Create (transaction code MC24). To make it easier, use copy from to copy update rules from S001.
Figure 13: Create Update Rules for Structure S990
Please make sure the Source information is properly updated for all the characteristics. Since you copied the rules, the sales order and item rules are defaulted too. Make sure appropriate changes are made for events VC (delivery) and VD (Invoice).
Figure 14: Source Characteristics for Sales Document and Item
Since we copied the Update Rules, the source field and table information is also copied. We need to change appropriately to make sure correct source information is populated. Click on Rules for charact and verify source information for every key figure, by clicking on previous key figure and next key figure.
Figure 15: For Event VD Billing Document, Sales Document and Item are present in MCVBRP table
Figure 16: For Event VC Shipping, Sales Document and Item are present in MCLIPS table
Figure 17: Maintain Update Rules for Structure S990 and Update Group
Task 4: Maintain Statistics Groups
Maintain Statistics Groups
Maintain Statistics Groups for Customers, Materials, SD Document Types etc. Most of the pre-defined settings are enough. Make sure that settings are updated for customized objects too, e.g., SD document types for your organizations.
Also, make sure that the customer (sales view) and material Master records are updated with appropriate Statistics Groups.
Figure 18: Maintain and assign statistics groups. IMG path: Updating> Updating Control> Settings: Sales> Statistics Groups
Maintain Statistics Groups for Customers (OVRA)
Figure 19: Statistics Groups for Customers
Maintain Statistics Groups for Material (OVRF)
Figure 20: Statistics Groups for Materials
Maintain Statistics Groups for Sales Document
Figure 21: Statistics Groups for Sales Documents
Assign Statistics Groups for relevant Sales Document Type
Figure 22: Assign Statistics Groups to relevant Sales Documents
Assign Statistics Groups for each Sales Document Item Type
Figure 23: Assign Statistics Groups to relevant Item Categories
-Assign Statistics Groups to each Delivery Type
Figure 24: Assign Statistics Groups to relevant Delivery Types
-Assign Statistics Groups to each Delivery Item Type
Figure 25: Assign Statistics Groups to relevant Delivery Item Categories
Determine Billing Document Types Relevant to Statistics
Figure 26: Assign Statistics Groups to relevant Billing Types
Note: As mentioned earlier, most of the settings are already set in standard system. Make sure that customized objects specific to your company are also updated appropriately.
Update Customer Master for Statistics Relevancy
Transaction Code XD02 (Sales view, field Cust stats.Grp)
Figure 27: Assign Statistics Groups to Customer Master Records (Sales view)
Update Material for Statistics Relevancy
Transaction Code MM02 (Sales 2 view, field Matl statistics grp)
Figure 28: Assign Statistics Groups to Material Master Records (Sales view)
Task 5: Assign Update Groups to Header and Item Levels
Assign Update Groups on Header and Item levels
For combinations of Sales Area (Sales Org, Distribution Channel, Division), assign Update groups (transaction codes OVRO and OVRP).
SIS IMG>Logistics Data Warehouse>Updating>Updating Control>Settings: Sales>Update Group
Update Groups at Item Level
Figure 29: Update Groups at Item Level
Figure 30: Update Groups at Item Level - details
Update Groups at Header Level
Figure 31: Update Groups at Header Level
Figure 32: Update Groups at Header Level - details.
Task 6: Activate LIS Update
Lastly, Activate LIS Update for the Structure (transaction code OMO1)
SIS IMG path: Logistics Data Warehouse>Updating>Updating Control>Activate Update>Choose Activity as Sales and Distribution.
Let's update our LIS structure S990 with period as Month and update option of Asynchronous Updating (2).
Figure 33: Activate LIS Update for S990
Finally u go through t.code MCSI, select ur info structure. Then execute the LIS report.
rewards if it helps
Edited by: kishore gopala on Feb 14, 2008 6:43 AM -
iPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers? I downloaded old version of Numbers 2.0.1 from DVD but with both versions the 2.0.1 will not open. So both versions are present but only the new version functions. I tried to drag the new version to the trash but the old version still runs error message and will not open. I did not try to restart with the new version in the trash.
Maybe. See:
Reverting to previous version of Numbers -
IPod will not update in iTunes with Windows Vista
Every time I connect my ipod to my computer, my computer locks up and it does not update. The only way I can even connect my ipod is to use manual update.
iTunes does not yet support Windows Vista. There are numerous problems running iTunes on it. The latest release of iTuens 7.1 fixed some of them but not all.
-
Previews in Adobe Bridge in Essentials View do not update after manipulation in Adobe Camera Raw
When I open a RAW file in Bridge and manipulate it in ACR, the preview is not updated in Bridge Essentials View. The only way I can get it to update the preview is to open the file in "Preview" view, then it updates and looks fine in Essentials view.
Is Bridge set up to store the ACR modifications to those XMP files? Only then it can update the preview right after working on it. Else you need to refresh the preview cache.
-
Can not update request in data target
Hi,
We have a process chain for master data (10 parallel) loads. One of the load
failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
When I checked the InfoPackage
(a) update: full load
(b) it has data selection
(c) processing :PSA and then to data targets
(d) Data targets: update in all data targets for which active rules exist.
But I do not see any list of data targets here.
Can some one please suggest me how do I correct this load failure.
ThanksHi Wondewossen, NS and Nagesh,
Thanks for the information. I am in support, and the developer is
not here now.
I have checked Header tab in the monitor, in this there
is a update symbol and infosource name and an -->
but after arrow there is nothing.
when I click on this I get a message
"No active update rules exist".
Can you please advice me how to I correct this.
Thanks -
I export part of my master catalog to a laptop. I include the image files so I can edit the files at full res. After managing and editing files I import the catalog back into the master catalog. When importing I check to replace metadata, develop settings and negative files. I have been running some tests to be sure all my work is being captured in the master catalog by this process. I find that if I change develop settings or photo ratings this is detected when the file is imported and the data in the master catalog is updated properly. The surprise is that if I delete files or move files among folders in the exported catalog these changes are not detected and these changes are not updated inthe master catalog. It seems bizarre to me that such changes are not detected but I do not see how to get LR to recognize these changes and include them in the catalog update. Without this capability I don't see how to use catalogs to move part of a catalog to another computer for edits and file management and then move back to the master catalog.
There are various reasons why Lightroom works this way, but you'll need use pick flags to indicate photos to be deleted, and other metadata like colours or collections.
-
Can not update tab if its not the default sub-tab.
Can not update tab if its not the default sub-tab.
JDeveloper Version 10.1.2.1.0 (Build 1913)
Hi. I have a problem with a lovOpenWindowAction
The UIX is created with a master UIX and have several sub-tab that is included as UIX-pages.
The lovOpenWindowAction lies in the included UIX-page
The sub-tab I have a problem with has a table with users. Then I have a Create New button than I want to click on and select a new user that should be included in the table in the sub-tab.
When I click on the button I open a LOV-window. Here I select the user that I want to add.
In the LOV Action-class I save my new value in the database. Then in the method onLovUpdate I update the iterator with the new values from the database.
But in my GUI the subtab is not updated until I click on it.
But if I make the subtab the default subtab then it all works just fine and the GUI is updated directly.
Here is the code for the tableAction in the subtab. This code lies in an included UIX-page. Target is the table id.
<tableActions>
<button text="Create New" id=" createNewRollperson" accessKey="N">
<primaryClientAction>
<lovOpenWindowAction destination="FiskeRollpersonerLOV.do"
source=" createNewRollperson "
targets="joinedRollpersfiskeer message"/>
</primaryClientAction>
</button>
</tableActions>
Here is some code from the master UIX-page
<subTabLayout id="flikar">
<subTabs>
<subTabBar selectedIndex="${ui:defaulting(param.index,0)}">
<contents>
<link id="resorFlik" text="Resor"
disabled="${sessionScope.fiske.id == null}"
selected="${(param.source == 'resorFlik') or empty param.source}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="resorFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
<link id="rollpersonerFlik" text="Rollpersoner"
disabled="${sessionScope.fiske.id == null}"
selected="${param.source == 'rollpersonerFlik'}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="rollpersonerFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
</contents>
</subTabBar>
</subTabs>
<contents>
<switcher childName="${param.source}"
defaultCase=ResorFlik">
<case name="resorFlik">
<include node="${ctrl:parsePage(uix, 'includes/ResorFlik')}"/>
</case>
<case name="rollpersonerFlik">
<include node="${ctrl:parsePage(uix, 'includes/FiskeRollpersonerFlik')}"/>
</case>
</switcher>
</contents>
</subTabLayout>
What am I missing?? I cant have this subtab as the default subtab! Please help me with a solution!hi,
Change the condition type to manual entry.
or
for example delivery costs will be different at the time of PO and actual delivery costs then at the time of invoice we select planned delivery costs and settle them first with the actual delivery cost.
Thanks & Regards,
Kiran -
i have modify the data STREET to "ANG MO KIO"
http://i192.photobucket.com/albums/z231/yzme/d1.gif
but the data in server still "HEAVEN ST"
http://i192.photobucket.com/albums/z231/yzme/d2.gif
I am using Time2Way T01, if it is when i sync the data will be uploaded, or do i need to configure somewhere to get the data upload ?
if the data in client and middleware is different, when i sync , the data from the middleware will again download to the client replace the modified values
OR
the data in the client will uploaded to the middleware and trigger the MODIFY bapi wrappers ?
<b>
when i check my MEREP_MON, and MEREP_LOG there is no data inside this meaning after i changed the values and perform the sync, Inbox and Outbox still remain the previous data as well as inside the MEREP_LOG,
is it the bapi wrapper not call by the client ?
</b>
and i find out that my bapi not get called, what additional code should i add instead of the code below.
DO I NEED TO IMPLEMENT SOME CODE FOR UPLOADER ??
do i have to change the reqDirectSync="true", if yes, how do i changed, just change inside the editor, or there is somewhere to configure in sapgui
after i changed the data , i try to sync, and i check on merep_mon
what specific or additional steps i need to configure, on uploader / receiver or synchronizer
<b>i do not implement any syncBoDelta or global reset ?</b>Can someone explain the term "delta" to me and its activities?
if i have upload something, and sync, the Inbox should have something right ??
i just put add this code to modify my records
public String modifyRecord(String eventName,boolean didNavigate){
String syncBoName="ZCON";
String syncKey="0001230297";
tableViewBean.setString(syncBoName +" "+syncKey);
System.out.println("SyncBoName: " +syncBoName + " syncKey: " +syncKey);
tcp = TableContentProvider.instance(syncBoName);
tcp.modifyTable(syncBoName,syncKey); return JSP_DETAIL_SYNCBOINSTANCE;
public void modifyRecord(String syncBoName,String syncKey){
SyncBoDescriptor sbd=null;
sbd=descriptorFacade.getSyncBoDescriptor(syncBoName);
SyncBo sb=null;
try{
System.out.println("bp 2");
sb=dataFacade.getSyncBo(sbd,syncKey);
}catch(PersistenceException pex){
System.out.println("Exception in modifyRecordLoc:" +pex.getMessage());
SmartSyncTransactionManager transactionManager;
try{ transactionManager=dataFacade.getSmartSyncTransactionManager();
if(!transactionManager.isTransactionStarted()){
transactionManager.beginTransaction();
boolean b8=false;
b8=setHeaderFieldValue2(sb,"STREET","ANG MO KIO");
transactionManager.commit();
SetSendType();
listAllOutDelta();
checkInboxConflict();
}catch(Exception e){
System.out.println("Exception in modifyRecordAmt2:" +e.getMessage());
public void checkInboxConflict(){
ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
MeIterator iter;
SyncBoResponse resp;
try {
iter= errorConflictInbox.getAllSyncBoResponses();
while(iter.hasNext()){
resp= (SyncBoResponse)iter.next();
String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
String state=resp.getSyncBoResponseState().toString();
String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
String msg=resp.getText();// This will return the exact message from the server
System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +msg);
System.out.println("state:" +resp.getSyncBoResponseState().toString());
if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
String a=resp.getSyncBoResponseState().toString();
resp.acceptClientSyncBo();
String b=resp.getSyncBoResponseState().toString();
resp.delete();
System.out.println("state1: " +a +"state2: " +b);
boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
System.out.println("syncStatus:" +syncStatusComplete);
}catch (Exception e) {
e.printStackTrace();
public void listAllOutDelta(){
SyncBoOutDeltaFacade deltFac=SmartSyncRuntime.getInstance().getSyncBoOutDeltaFacade();
MeIterator allDelta;
try {
allDelta = deltFac.getAllDelta();
while(allDelta.hasNext()){
SyncBoOutDelta outDelta=(SyncBoOutDelta)allDelta.next();
System.out.println("SyncKey:" +outDelta.getSyncKey() +" Action:" +outDelta.getAction()
+" State:" +outDelta.getStateId() +" SendType:"+outDelta.getSendType());
} catch (SmartSyncException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (PersistenceException e) {
// TODO Auto-generated catch block
e.printStackTrace();
public void SetSendType(){
SmartSyncRuntime ssRuntime = SmartSyncRuntime.getInstance();
SyncBoOutDeltaFacade boDeltaFacade = ssRuntime.getSyncBoOutDeltaFacade();
SyncBoDescriptorFacade descF = ssRuntime.getSyncBoDescriptorFacade();
SyncBoDescriptor myBO = descF.getSyncBoDescriptor("ZCON");
boDeltaFacade.setSendType(myBO, SyncBoOutDeltaSendType.SEND_DIRECT);
//SyncManager.getInstance().synchronizeWithBackend(VisibilityType.USER_SHARED);
public boolean setHeaderFieldValue2(
SyncBo sb,
String headerFieldName,
Object value) {
SyncBoDescriptor sbd = sb.getSyncBoDescriptor();
//RowDescriptor trd = sbd.getTopRowDescriptor();
System.out.println("bp 10");
RowDescriptor trd=sbd.getRowDescriptor("010");
System.out.println("bp 11");
FieldDescriptor fd = trd.getFieldDescriptor(headerFieldName);
System.out.println("fd:" +fd.getFieldName());
if (fd != null) {
BasisFieldType bft = fd.getFieldType();
//Row header = sb.getTopRow();
System.out.println("bp 12");
//Row header = null;
Row[] header=null;
//try {
//header = sb.getRow("0001211181");
//header=sb.getTopRow();
header=getItemInstances(sb,"010");
if(header==null){
System.out.println("is null");
}else{
System.out.println("not null");
//} catch (PersistenceException e1) {
// TODO Auto-generated catch block
// System.out.println("Exception getRow:" +e1.getMessage());
// e1.printStackTrace();
System.out.println("bp 13");
try {
// Integer operator
if (bft == BasisFieldType.N) {
System.out.println("Numeric");
NumericField nf = header[0].getNumericField(fd);
if (nf != null) {
BigInteger ii = new BigInteger(value.toString());
nf.setValue(ii);
return true;
} else {
return false;
// Character operator
if (bft == BasisFieldType.C) {
System.out.println("Character");
CharacterField cf = header[0].getCharacterField(fd);
if (cf != null) {
cf.setValue(value.toString());
return true;
} else {
return false;
// Decimal operator
if (bft == BasisFieldType.P) {
System.out.println("Decimal");
DecimalField df = header[0].getDecimalField(fd);
System.out.println("bp 1.1");
if (df != null) {
System.out.println("bp 1.2");
BigDecimal bd = new BigDecimal(value.toString());
System.out.println("bp 1.3");
df.setValue(bd);
System.out.println("bp 1.4");
return true;
} else {
System.out.println("bp 1.5");
return false;
// Similar operation for time and date operator fields
if (bft == BasisFieldType.D) {
System.out.println("Date");
DateField df = header[0].getDateField(fd);
if (df != null) {
if (value.toString().equals("0")) {
Date dat = Date.valueOf("0000-00-00");
df.setValue(dat);
} else if (!value.toString().equals("")) {
Date dat = Date.valueOf(value.toString());
df.setValue(dat);
} else {
Calendar cal = Calendar.getInstance();
java.sql.Date bd =
new java.sql.Date(cal.getTime().getTime());
df.setValue(bd);
return true;
} else {
return false;
// Similar operation for time and date operator fields
} catch (SmartSyncException ex) {
System.out.println(ex.getMessage());
} catch (PersistenceException e) {
System.out.println(e.getMessage());
return false;
SyncType: T01 Wrapper: GetList,GetDetail,Modify
<?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="ZCON" version="01">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED">X</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync="false" downloadOrder="1">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <ChildStructure name="010">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY1" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY2" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="STREET" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="HOUSE_NUM" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="REGION" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
</ChildStructure>
</TopStructure>
</SyncBO>
</MeRepApplication>
Message was edited by:
yzme yzme<u>my intention is very simple, i just need to update a field in a row and update to the middleware so that the backend will reflect the changes. </u>
>2 if i set the conflict/error handling to application, then i should have to implement some code for it, right ?
>3) List syncbooutdelta
<b>SyncKey:0001233035 Action:M SendType:SEND</b>
doesnt it mean that when i sync , the uploader will pick up this data and do a modification ??
i have change the metadata like this
<SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync=<b>"true" </b>downloadOrder="1">
1) i try to sync the application and check the worklist monitor, there is nothing in the inbox ? how come ?
2)if i test using emulator, i try to modify a value and execute, i am getting the following error.
<u>
Header action from mobile="MOD", R/3 action="ADD"
Return code 1 (DOWNLOADER)
</u>
i try to modify not "Add"
3) I am using Time 2 Way , how to check it is synchronous or asynchronous ? in merep_sbuilder, the default asyn. is checked, meaning async ??
the type is T01 , ASYNC
4)
public void checkInboxConflict(){
ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
MeIterator iter;
SyncBoResponse resp;
try {
iter= errorConflictInbox.getAllSyncBoResponses();
while(iter.hasNext()){
resp= (SyncBoResponse)iter.next();
String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
String state=resp.getSyncBoResponseState().toString();
String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
String msg=resp.getText();// This will return the exact message from the server
System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +mtext);
boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
System.out.println("syncStatus:" +syncStatusComplete);
}catch (Exception e) {
e.printStackTrace();
<u>bo:ZCON state: INITIAL res: CONFLICT msg:Conflict: R/3 = delete, device = modify
SyncStatus=true (complete)
</u>
5) after that i change my code to this
while(iter.hasNext()){
if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
String a=resp.getSyncBoResponseState().toString();
String a1=syncBO.getSyncState().toString();
resp.acceptClientSyncBo(); //No transaction stated to commit
resp.delete();
String b=resp.getSyncBoResponseState().toString();
String b2=syncBO.getSyncState().toString();
System.out.println("state1: " +a +"state2: " +b);
System.out.println("SyncState1: " +a1 +"SyncState2: " +b1);
<u>state1: INITIAL state2: RESOLVED </u>
<u>SyncStatus1:QUANRANTINE SyncStatus2: INCONSISTENT</u>
and i try to sync ...no data in worklist
6)i try to list out all the delta to be uploaded
ListAllOutDelta to be upload
<u>SyncKey:0001233349 Action:I State:99925F8E24DFFE49A4563C5E018E9B61 SendType:SEND
</u>
i am modifying the rows, not Insert a new row, the Action:'I' instead of 'M', pls clarify on this.
after i sync, i found out that there is 2 record with different syncKey but same primary key and all attributes appear to be same except the attribute that i changing.
<u>SYNCKEY PERSNUMBER CITY STREET HOUSENO</u>
0001230298 000000000 HELL <u>ANG MO KIO</u> 0123456789 (modified record)
0001230299 000000000 HELL <u>HEAVEN ST</u> 0123456789(old record)
i check the application and found out that the previous record that i modify have its value changing locally but not updated into the backend, after sync, there is another record downloaded into this application which is the old record before i modify with different syncKey.
but when i check the backend table, there is only 1 record inside, because i dont implement the 'Create' Bapi.
does it make sense ?
7) when i check my client , the data is persisted with modified value , but the changes is not reflected in the server, how come the data in client is not uploaded to the server.
acceptClientSyncBo will make the client wins how come the data is not get updated in server ?
Re: Regarding modifying Sync BO
According to him, can anyone translate the things highlighted below
for modifying one sync bo instance , there is no need to use createUnlinkedCopy()..
just use like this..
sb = dataFacade.getSyncBo(sbd,key);
SmartSyncTransactionManager transactionManager;
transactionManager = dataFacade.getSmartSyncTransactionManager();
transactionManager.beginTransaction();
setHeaderFieldValue(sb,"PERSNUMBER","9866321467");
setHeaderFieldValue(sb,"FIRSTNAME","RajaSekhar");
setHeaderFieldValue(sb,"LASTNAME","Varigonda");
setHeaderFieldValue(sb,"PROFESSION","Technical Specialist");
setHeaderFieldValue(sb,"***","MALE");
setHeaderFieldValue(sb,"BIRTHDAY","1977-09-28");
setHeaderFieldValue(sb,"HEIGHT","165");
setHeaderFieldValue(sb,"WEIGHT","75");
// Commit the transaction
transactionManager.commit();
setHeaderFieldValue - can be used to set value in new sync bo instance , or modify the instance.
<b>
But one main think here have to consider is , if you have created one Sync Bo instance , not synchronized with back end and u have modified that, then thats just like a creation .So during sync this will call Create Bapi Wrapper.
</b>
But after synchronization , is u are modifying that instance , then it is a modification(will call MODIFY Wrapper in back end during synchronization). u must have the right to modify this instance in the client side.
hope u got it.
u can debug MI Applications in NWDS.
refer this blog written by Arun
/people/arunkumar.ravi/blog/2006/02/22/execute-debug-your-mi-code-from-nwds
let me know , if u have doubts
Regards
Kishor Gopinathan
pls comment... -
Can not update an assignment block with on_new_focus
Hello Experts,
I have the following problem. I created a new component which is similar to the component BP_BPBT to create activities for Business Agreements. In the overview page of the business agreement in WebUI, I have now the assigment blocks "Plannend activities" and "Interaction History".
When I create a new activity in the assigment block "planned activities" with the new button and save the activity with the buttons "SAVE" or "SAVE AND BACK". The new created actity is shown, depending on the "Active Status" , in one of the assignment blocks "Plannend activities" and "Interaction History". When I create an another activity in the same way, the new actiity is not shown in the assignment blocks. But when I reload the page again, I can see the new created activity.
During debugging, I see, that the first creating activity is in the collection in the method ON_NEW_FOCUS. When I create an another activity, the collection is not updated. Here is my coding:
* get collection of dependent nodes
TRY.
entity ?= focus_bo. "BuAg Entity
CATCH cx_sy_move_cast_error.
RETURN.
ENDTRY.
TRY.
lr_entity = entity->get_related_entity( iv_relation_name = 'BuAgBuPaRel' ).
lv_collection = lr_entity->get_related_entities(
iv_relation_name = 'BuilInteractionHistoryRel'
* D022159: Performance optimization
iv_mode = lv_mode ).
Can anyone explain me, why the activities (after the first one) are not in my collection.
Can anyone help me to fix this problem?
Kind Regards,
John H.Hi,
Please check if you have added your entity to collection after you save the entry. It looks like your value is saved in DB but its not reflected on UI because you are not refreshing your collection.
I would suggest that you write a code after you save and commit to refresh your collection of the context node.
Regards,
Bhushan -
Table record is not updated correctly after navigate back from detail page
I have 2 jspx pages one (page A) has a table displaying the employee record, another one (page B) is used to update the selected employee record. On page A, when selecting a record and clicking the 'Details' button I can be navigaed to pag B on which I can modify the record information in a form component. I have one table column 'teamName' which is binding to a LOV at VO layer and on pageB I am using <af:inputComboboxListOfValues> to show a editable LOV list for this attribute, when I input a new value here and save it, I can go back to page A but the team name for this record shows empty, by querying the database I do find the record updated successfully with the changed value. And when I reloaded the page the record can show the new team name value. Why it is not updated in the employee table when immediately navigating back from page B? I have set the table iterator refresh attribut to "always" but still failed. Can anyone help on this issue? Thanks!!
BTW, for other columns (not LOV) they are ok, the table can show the changed value correctly.
Edited by: user774592 on Jul 14, 2011 7:56 PM
Edited by: user774592 on Jul 14, 2011 9:59 PMThanks for reply!
I did exactly the same as what you said. I d&d the data control Commit operation on page B to generate a 'Save' commandToolbarButton with the action attribute set to 'save' which is the from outcome for navigating back to page A. Is there any business logic I need to write here? Currently I have no.
Note: In this case I used an editable LOV, I have a requirment that besides selecting a existing value from the lov, user can also input a new value in the LOV. When going back to page A, I do find the LOV list is updated to contain the new vaule. Just the record in the table shows an empty value instead of the new value. Still do not know why.
Maybe you are looking for
-
DB Connect Load - "Unknow error while uploading data from the DB Table"
Hi Experts, We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment. I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be fo
-
Help - my hard drive is lying to me???
Today my computer was working fine except my iphoto seemed to have dissappeared, so I made a mistake I think and added library from an external hard drive and I think it copied the files onto my main hard drive? But the weird thing is that the pictur
-
Editor will not open after Elements 11 is transferred from Mac Snow Leopard to OS 10.10.2 Yosemite
I have been running Photoshop Elements 11 on a Mac with OS 10.6.8 (Snow Leopard). I've just got a new Mac with the latest OS X (OS 10.10.2, Yosemite). I transferred all my files to the new computer with Migration Assistant. The PSE 11 seemed to insta
-
How do I stop the dialog box from popping up asking me Qs about updates when I start Firefox?
I recall electing to have Firefox ask me at startup about updates and I would like to change that and just open a browser window whenever I start Firefox.
-
My first problem with I tunes is changing the user name, upgraded my computer from desk top to lap top. Since I changed computers I could not get my original I Tunes setup on my new computer. All of the songs, movies and prod cast could not be transf