LIS setup table loading and check after doing deletion and uploading

Dear All,
We are doing SAP HR upgrade in our ECC system for which there is a prerequisite to delete all the
data from set up tables,can we skip this process while upgrade and if not than pls clarify me the follwing points
1)what point we should consider for deletion and loading of the data from setup tables .
2)how we will ensure that after filling the setup tables the data will come right in BW system(how to test)
if anyone of you have come across this scenario then pls help me.
Thanks,
Jyoti

Hi sapta,
Ok. If you need to delete data then follow the following steps:
(For all the LO datasources like SD/Pur/MM/PP)
1. Pull all the delta data in BI. Delete it.
2.Delete the data in RSA7 and LBWQ.
3.Delete the setup table data in LBWG or by menu option from SBIW.
Filling of setup table is through OLIBW( is the data source number) or by menu option in SBIW.
You need to take downtime for ECC to fill setup tables so that you dont miss any postings.
Hope it answers your question.
Regards,
Gaurav
Edited by: Kanungo Gaurav on Jul 2, 2009 12:41 PM

Similar Messages

I'm using a macbook pro with version 10.6.8 installed. whenever i try to install my software updates, it immediately asks me to restart my computer to finish the installation. after doing so and signing back on to my account no updates have been installed

I'm using a macbook pro with version 10.6.8 installed. Whenever I try to install my software updates, it immediately asks me to restart my computer to finish the installation. After doing so and signing back on to my account, nothing has changed and no updates have been installed. It still says the same 8 items need to be installed, and the same process occurs again. Any idea how I can fix this?

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

I have downloaded a pdf from a jounal web site. After doing this and inserting comments, then saving it, upon opening it again, i can no longer see the text but only the highlight changes that i made

I am using Adobe Acrobat Pro XI. I have downloaded a pdf from a journal web site. I need to review this article and make comments in the text. After doing this and saving the file, when opening the saved file, I can only see the highlights where I made changes and the list of comments that I made, but I no longer see the original text. See the example below. Can anyone help on this?

I am using Adobe Acrobat Pro XI. I have downloaded a pdf from a journal web site. I need to review this article and make comments in the text. After doing this and saving the file, when opening the saved file, I can only see the highlights where I made changes and the list of comments that I made, but I no longer see the original text. See the example below. Can anyone help on this?

Mozilla shows NOT RESPONDING until it loads the pages completely, for FACEBOOK and checking EMAILS on yahoo and google

Mozilla shows NOT RESPONDING until it loads the pages completely, for FACEBOOK and checking EMAILS on yahoo and google.
You can't do anything, you should just wait.

I'm getting a similar error over here. Sporadically some sites won't load specifically in Safari; they open just fine in Opera, Firefox and Camino though. This is really annoying.
It's pretty clear it's nothing network related…

I forgot my passcode and even after doing restore through itunes it still says its disabled. Help

i forgot my passcode and even after doing a restore in itunes phone still says disabled Help

You need to restore via recovery mode as shown in the article below:
http://support.apple.com/kb/HT1808

BW variable: Inconsistent in loading. please check use of deleted objects

Hi Experts,
I encountered an error and can not solve it following OSS note.
When I create a variable in query definition for an infoobject, it prompts an error dialog 'Inconsistent in loading. please check use of deleted objects'.
I checked the OSS notes 792779, there is a such description:
The variable existing in the table RSZGLOBV, but not existing in the tables RSZELTDIR or RSZCOMPDIR have inconsistent definition. These situation may return 2 different error messages. When a variable is missing in RSZELTDIR table (or in both together), an attempt to expand a list of variable under a corresponding InfoProvider or a list of text/formula variables will return a message 'Inconsistency in loading...'. All variables which are created for corresponding InfoProvider, text/formula variable are not available. When a variable is missing in the RSZCOMPDIR table only the error message is 'Missing UID XXXXXX... in RSZCOMPDIR! You may continue to work, but this component is not loaded' in Query Designer
But I checked these tables RSZGLOBV and RSZELTDIR and RSZCOMPDIR. I can find a variable for this infoobject, such as TC_SREG, in these tables. That is, this variable should be availbale in the query definition.
I don't know why.
My sap bw is 3.1, without the program 'ANALYZE_RSZ_TABLES'.
Many thanks for you help.

Hi,
While installing business content make grouping as Data Flow before and collection mode as 'Automatic'. Then expand the Tree in the tree you can see Info Object Catalogue. All installed and activated object will be in green (Active Mode). those will be normally unchecked to install anyway cross check and if found anything check deselect them. Go for Simulation Installation to identify unforeseen errors. Install the same and activate entire data-flow.
Hope your issue will be resolve
Thanks
BVR

I install Mountain Lion on my MacBook Pro and freezing after waking up and is impossible restart

I install mountain lion on my macbook pro late 2009 and freezing after waking up and is impossible restart

Restart your mac in Safe Mode by holding down the 'shift' key while it powers up. You'll know if you've entered Safe Mode correctly if you see a progress bar underneath the grey Apple logo screen. Let go of the shift key when you see that, wait for the progess bar to complete then log in.
After log in, go to
 > System Preferences... Users & Groups and remove everything from the 'Login Items' tab.
If you have any anti-virus software installed (Sophos, F-Secure, VirusBarrier, Mackeeper) uninstall it while in Safe Mode.
Restart your mac normally and test.
Any improvement?

With the Photoshop and Lightroom bundle, does Bridge and Camera Raw come with it?

With the Photoshop and Lightroom bundle, does Bridge and Camera Raw come with it?

Hi,
Yes, both Camera Raw and Bridge are included. Bridge will need a separate installation, however.
regards,
steve

My notes were coming in double so I deleted on and then they all deleted and I can't find them in trash or anywhere and there was a lot of important information on them. Any idea where they might be -----very very frustrated

my notes were coming in double so I deleted on and then they all deleted and I can't find them in trash or anywhere and there was a lot of important information on them. Any idea where they might be -----very very frustrated

Welcome to the Apple Community.
Use your Time Machine (or other) back up to return to the point before you deleted them.

Windows stuck on blue HP Invent screen and won't load desktop items after doing a system recovery

Hello, this is my first time posting here, as I am in desperate mode! I have a HP Pavillion Slimline s5304y desktop pc, using Windows 7, that I purchased in Feb 2010.
After getting a virus on my computer, I ordered system recovery disks from HP and did the recovery to original factory settings process (twice!), however, during the Windows setup process, it doesn't ever get past the blue HP Invent screen that says:
--Do not turn off your PC during this one-time setup process
--Your PC restarts several times during this setup process
--Messages may pop up onto your screen. Ignore these messages until you are prompted to restart or shutdown your PC
Towards the bottom of the screen it continues to say "Please wait..." with a scrolling green bar. All I see is the windows start buttom in bottom left corner but am not able to access anything and I don't ever get my desktop screen or desktop icons. I have restarted and shut down several times and as soon as I log on to windows, I just get that same blue screen.
The 2nd time I did the recovery process, I let it continue overnight (just in case I wasn't waiting long enough) and my computer never shutdown like it was supposed to when the installation was complete. Also, I watched the whole process the first time around and my computer never restarted like it said it was supposed to; it just seemed to be stuck during the rest of the windows setup process. It eventually just went into sleep mode.
I don't have anything else plugged in except the power cord, the monitor and the keyboard/mouse. I have not installed any new hardware since I purchased the computer.
I did a diagnostics test and everything passed.
I tried to get help from HP Support, but because I'm out of the warranty period, they cannot help me and want to charge me $99!!!
I don't know what else to do at this point. Can someone please help???
Thank you.
This question was solved.
View Solution.

Hi,
I would try wiping the entire Hard Drive first and then reinstalling the Operating System as this may get around this issue.
Download and install Killdisk on the link below - ( despite the name, this application will just write zeros to the entire drive leaving it in a similar state to a new Hard Drive ).
http://software.lsoft.net/KillDiskSuiteFree-Setup.exe
Download and install ImgBurn on the link below.
http://download.cnet.com/ImgBurn/3000-2646_4-10847481.html
Go to the Kill Disk application you have installed in All Programs, open the main folder, then select Bootable Disk creators and from that select Bootable DOS CD Creator which will burn the bootable ISO to a blank CD.
During the next process do not worry about any warnings as your Recovery DVDs will reformat the HDD.
Insert this CD in to your PC that is unable to load Operating System properly. Shut the PC down, then start it again to boot from the Killdisk CD and follow the on screen instructions for Kill Disk.
A brief description of the process is here Killdisk.
Use this to wipe the whole of the Hard Drive, highlight (80h) and press f10 ( you will also have to type a confirmation and hit enter ) - ( this will make sure you include all partitions and then start the process - this may take a couple of hours! ).
When the process is complete, remove the Killdisk CD, insert your first HP Recovery Disc and try the installation again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Setup tables ,load failed . Please help !!!

Hi, I have newly created a setup for sd infocube and have completed 5 delta loads from BI. But now my 6th delta load fails, and the data in my cube is lost. I have a queued delta setup .So now
1) delete the init flag.
2) delete all the setup table data with LBWG.
3) FILL the setup tables again OLI7BW newly.
4) Now if i do a full upload so will i get all my previous data ( all data till my 5th delta load)
5) by doing a full upload will my 6th delta load also be included in the setup tables, since im refilling the setup tables.
What should I do if its an ODS , is it the same case for ODS also ?

Hi.......
Are u sure data is lost.......hav u repeated the failed load.........look if u delete the failed request from the target after making the QM status forcefully red in the IP Monitor>> Status tab..........then the init pointer will set back........after that if u repeat the load...........then the system will ask u for Repeat delta...........means that it will pick all the missed records.........that were not loaded due to the failed load........
Now if u hav deleted the failed load without making the QM status red..........but have'nt repeated the load.........then nothing to worry about..............just make the QM status forcefully red........then repeat the load..............system will ask u for repeat delta................but if u hav deleted the request without making the QM status red......and also hav repeated the load..............then ur delta mechanism will get corrupted and data will be lost.........
In that case......
1)) delete the init flag.
2) delete all the setup table data with LBWG.
3) FILL the setup tables again OLI7BW newly........with selection...........to get the lost records....
4) After that either do full upload......followed by init without data transfer.................or simply do init with data transfer........it will pick records.as well as set the init pointer...........in that case........no need to do full upload......
In case of ODS............never do full upload.........bcoz an ODS does'nt support full upload and delta upload parrallely.......then ur ODS activation will fail............in this case instead of full upload..........u hav to do full repair........same thing.........just go to IP scheduler >> Scheduler tab >> Repair full request>>check the box.............then go ahead.......as u do in case of full upload...........schedule the load..................if u do full upload....then again u hav to convert the full upload request to full repair request....using the program :RSSM_SET_REPAIR_FULL_FLAG .......
Hope this helps......
Regards,
Debjani....

Setup table load

Hi Gurus,
I have to run 8 sales order parallel jobs(sales doc range) and 9 delivery parallel jobs(delivery doc range) into setup tables in the production. So my question is ,
Could I run sales order parallel jobs and delivery order parallel jobs at the same time to load data into setup tables in the production ?. Please advice.
Thanks
Liza

If the users are going to be locked out and you are sure you have enought process, then it is ok. Even if you don't have enough process, that lates setup will wait until the other one is done.
I assume the reason you want to do this is you want to make sure you finish the setup within a given time. You have to lock the users out only when you are doing initialization and do initialization without data transfer which won't take more than a min or two and do a repair request to the ods once the setup is done, that way you don't have to wait to release the users until the setup is done. Any new posting came while the setup is going will go and sit in the extraction queue and with delta load, you will get them once the repaire request is done.
thanks.
Wond

HT4009 I purchased Paprika Ap for my new i pad and realized after doing so that it was "paprika for I phone. Can I exchange it for ap for i pad?

New to ipad and searched for paprika app. clicked on one and downloaded. After doing so, I realized it was an app for the i phone instead of the I pad. Are they interchangeable - can i use this i phone app on my ipad or can i exchange?

You can use the app on the iPad assuming that you have the required iOS on the iPad. It will be in the native iPhone screen size - half size on the iPad. You can enlarge it by tapping on a 2X in the bottom right corner, but it will be pixelated and low resolution. But it will work.
You cannot exchange apps and the terms of the Apple stores are that all sales are final. But you can always try if you want to do so.
Start here.
http://www.apple.com/support/itunes/contact/

Itunes keeps asking to erase and sync after already erased and synced

I've erased and synced my iPhone 4 and iPad 1 both 3 times, iTunes is asking to do this everytime I want to add something new. When I'm done I'd have everything checked in the upper left hand corner in itunes that I always want to sync i.e. music, tv shows, or books, but when I reconnect a couple days later some will be unchecked then I have to erase and sync. Anybody know why this is happening.
Specs
MacBook Pro: Mid 2012
OS X: 10.8.2
iTunes 11.0.1

I think you can mark this thread as "answered".
I had the same problem after picking up a replacement 4Gb iPhone from the Apple store last night. When I returned home and plugged in the iPhone it downloaded the 2.0.2 update and applied it prior to the first or two painfully slow restores on my G4. When the iPhone came back to life after the Restore I had the same situation you described, apps and data restored but no music and only the "Set up new iphone" or restore from backup option when the iPhone appeared in iTunes. Thinking I had done something wrong I told it to Restore the from backup again. Two hours later, same results.
So I was pleased to see your message on the discussion board and possible solution. I couldn't wait to get home from work to try it. Well, selecting "Set up as new" fixed it. My iPhone appeared as normal in iTunes and I'm syncing my music as I type.
Thanks!

I can't send, recieve sms and calls after i delete messages from my phone

help. how to fix?

Problem Fixed.
After doing a factory reset, I set up phone as new. this then resolved the problem.
Before doing this i recommend backing up yur contacts, and making a note of all your personal preferences. as you will have to set it up from scratch again.
Cheers to everyone who helped out,
Jack Walsh

LIS setup table loading and check after doing deletion and uploading

Similar Messages

Maybe you are looking for