Liscence for SAP Content Server

Hello,
Our client is using SAP ECC 6.0 system. They want to start using DMS. Content server is not installed. Do we need seperate liscence for Content server?
Regards,
Milind Dumbre

Dear Milind,
maybe you can find useful information on the SAP Service Marketplace under http://service.sap.com/contentserver.
Best regards,
Christoph

Similar Messages

  • SAP Parameter Recommended  note for SAP Content Server 6.40

    Hi..
    we are planning to installation of SAP Content Server 6.40 with SAP MAXDB 7.6 on Solaris, Kindly provide what are the recommendation need to perform before installation  of Production system.
    Like IO Buffer Cache[MB] ,  Number of Sessions  or any SAP Parameter Recommended  note for SAP Content Server 6.40 with SAP MAXDB 7.6.
    Regards,
    Panu

    Hello,
    Did you already check the preparations and parameters in the SAP CS 6.40 installation guide ?
    You can find topics in the Installation Guide like :
      - Planning and Sizing of the Database Instance
      - Preparations
    For more in depth tuning also have a look at the following document :
    Operational Guide - SAP Content Server
    This document contains the complete list of Content Server parameters.
    Success.
    Wim

  • EWA reports for SAP Content Server

    Hi
    I have installed the SAP Content Server 6.40 on Solaris and MaxDB but my client want to configure EWA for  SAP Content Server.
    As per Content Server for EWA reports need to be configuring only Database and OS.
    Kindly suggest me what are the steps need to be performed to setup the EWA for Content Server.
    Regards,
    Panu

    Hi There
    In order to have EWA report for any system you need to meet some prerequisit , for detail please refer to
    this link below..
    http://service.sap.com/EWA   >> Media Library
    Best Regards
    Jai Wardhan

  • Content repository creation for SAP Content Server

    Hi,
              I have installed Conteont Server 6.5 and Cache Server with Max DB 7.9.8.12 instance on windows server 2008  platform.Now connection to the content server with SAP Netweaver 7.4 on different host is established .When i am trying to create repository in Content Server Administration in application  SAP Netweaver 7.4 server an error is prompted as:
    Can any one please suggest me a solution
    regards
    uday reddy

    Hi Chandu,
    Thanks for the reply,
    I have tried the both commands mentioned in sap note 301352.It is showing results as
    Error : The specified driver does not exist.
    Please suggest me with a solution.
    regards
    uday reddy

  • HTTP 401 error in CSADMIN for SAP content server on Linux OS and MaxDB

    Hi,
    We have installed content server on Linux OS.and DB as MaxDB.
    I created the repository using OAC0. The with same tab I went to CSADMIN.
    When I try to create repository with executing it , it ask for user name and password.
    I mentioned the SAPCS admin user name and password, but i got HTTP 401 error. Unauthorized user.
    Even i tried with prefixing domain name and with root user ID and password.
    But got the same error. Please help
    Regards,
    Hemant

    Hi
    We are also facing the same problem. but as you mentioned in solution.
    user: <domain>/<admin-user>
    pw: pw
    I am getting the same problem of Error 401. Kindly describe in detail with example.
    Thanks
    Regards,
    R Karthikeyan

  • Role of MaxDb in SAP content server

    Hello experts,
    We have already gone through the content server documents.
    We are not yet clear with role of MaxDb database in SAP content sever.
    Is it prerequisite to install MaxDb for SAP content server?(eventhough documents has to be store in file system)
    We Want to perform document archiving, for this reason we want to store documents in File system.
    So in this scenario where will be the meta data stored?

    Hi Akshay,
    You can check the installation guide, you can install Content server without maxdb on a separate server and it will use the storage (File system) of that server to store the documents.
    As far as I know, the meta data is stored on the file system(if Maxdb not used) or on Maxdb and the header is stored on the SAP side.
    For installation without maxdb, you can check the below link
    "http://itsiti.com/sap-content-cache-server-installation-steps"
    -AC

  • How to install Apache Web server on my SAP Content Server

    Dear Experts,
    I am in the process of installaing Content Server in my landscape, i am working on Suse Linux 10 SP2 and planning to install ContentServer 6.30.
    I have read the standard SAP installation document for the same and it says that we need to install Apache Web server version 1.3.XX, so i have downloaded the file apache_1.3.27-x86_64-whatever-linux22.tar.
    Now i want to know the following before i take any actions on my further installation of the Content Server
    What is the difference between Apache and httpd servers (services) are they different or same
    Is the file apache_1.3.27-x86_64-whatever-linux22.tar correct to install Web Server on my Linux system
    Do i have to download any other httpd files
    How to install and start the Web server on my Linux
    Waiting for some information
    Thanks and regards
    BasoKing

    You can install a higher apache also (2.2.x), I'd not use the old versions. I'd also not use a "somwhere" compiled apache, you don't now if that version is clean.
    I'd rather compile an own one, it's not that difficult:
    Note 664384 - Generation info for Apache Web server for SAP Content Server
    The result will be a default webserver (httpd) without any unnecessary modules compiled in.
    Markus

  • What is the latest prod. supported MaxDB Version w. SAP Content Server 6.40

    What is the most actual supportet MaxDB Version when using with SAP Contentserver 6.40?
    In PAM Page 5 (of the Powerpoint) the official Version should be 7.5.
    In "install and Upgrade" NW 7.0 there is the "NW 7.0 Presentation - MaxDB Release 7.6.03"  available for Download and the "MaxDB RDBMS 7.7.06 Build 10 - Windows Server on x64 64bit "
    Does that mean, that the 7.7 Version is official supported for Production?
    Searched the Notest but found no answer for that.
    Ulrich
    ... half an hour later ...
    just found MAXDB 7.7 Installation which suggest the 7.7 is the latest official supported.
    could that be the answer?
    Ulrich
    Edited by: Ulrich Neumann on Feb 2, 2010 12:39 PM

    Hello Ulrich,
    Please refer at SAP link  http://service.sap.com/pam for full platform availability information of the new version. SAP Content Server is shipped with NetWeaver 2004s SR1.
    < service.sap.com/pam -> SAP NetWeaver 04 -> Database Platforms -> Content Server
       Select in MAXDB section u201CWINDOWS SERVER...   u201C >
    < according PAM :
    MAXDB 7.6 64-BIT is released on WINDOWS SERVER 2003/X64 64BIT for     
    SAP CONTENT SERVER 6.40 > 
    As you know the SAP installation guide for Content server is available at::                          
    service.sap.com/installations -> SAP Components                  
    ->SAP Content Server -> Release 6.40 and higher                  
    < Installation - Standalone Engines >                                                                               
    For additional information and documentation please go at  SAP link:      
    http://service.sap.com/ContentServer                             
    -> FAQs SAP Content Server    
    Thank you and best regards, Natalia Khlopina

  • How to see documents checked-in to SAP Content Server ?

    Hi ,
      I'm not sure if this is the right forum for this question but I did not find anything more pertinent.
    We have a scenario in ECC 5.0 which we are attaching PDF/etc document to SAP DMS Document records in Tcode CV01N/CV02N . Subsequently we check-in those originals to the SAP Content Server. All this is working just fine as the underlying settings for the content repository in Tcode CSADMIN is appropriately set.
    Is there a way to monitor how many and which documents have been checked in to the SAP COntent server. In the 46C/47 days, we used to go to Tcode OAAD and get a count & list of all documents that have been shipped to a content repository. In the scenario for SAP Content server, I'm unable to use this tcode to get the information.
    Is there another tcode that will give me the information on the documents linked to the Content Server ?
    Your help is greatly appreciated.
    Thanks,
    Vipin

    Hi to add more...
    On service Market Place....
    Go with the below path
    Installations and Upgrades --> " SAP Application Components" --> SAP EASY DOCUMENT MANAGEMENT" ---> SAP EASY DOCUMENT MGMT 6.00.
    Thanks,
    Tanuj

  • Using SAP Content Server for SAP E-Recruitment

    Hi SAP Experts,
    We are presently implementing SAP E-Recruitment using BSP services, We are successfully runnig with Whole E-recruitng cycle when we use SAP system DB as storgae for External Candidtes' Documents.
    But, Our Client wants to have SAP Content Server to store all documents uploaded by External/Internal Candidates becuase client is worrying that if SAP system DB holds such huge data base of Resumes, it may slow down the performance of SAP System.
    So, We need inputs from you suggesting whether is it feasible to use SAP Content server for SAP E-Recruitment Implementation. SAP no where suggests to Content server. So, we are in deliema to go for content server or not. If it is feasible to use Content server, pls provide me proper links or documents for reference.
    Please give your valuable inputs,
    Thanks & Regards,
    Sudheer Kumar P

    Hi Sudheer,
    We are considering the same option.  We are concerned about performance after all these documents are uploaded too.  Did you install a content server?  How did it go and was it difficult to set up with e-rec?
    Thanks
    Shane

  • Post-actions for Kpro-Content Server after Sap DB Copy

    We have a Sap system based on Web As 6x connected to a Sap Content Server to store originals.
    We copied back this Sap system to the quality system.
    Now the Sap quality environment refers to the same Content Repository of the production, and we want to modify this.
    From this environment it should not be possible to access or to modify the originals of the production.
    More in general, wich post-actions can be done on the Sap target system after a DB copy where the source system is connected to a Content Server ?
    For example, which tables can be cleaned up ?
    regards

    Hi,
    Pls see the below link if this can help you.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/3e704c462a11d189000000e8323d3a/content.htm
    Anil

  • SAP Content Server sizing for DMS

    Hi
    Can anyone advise on the most appropriate way to 'size' for a new Content Server. Documents have been stored in the SAP DB till now, but the use is increasing, so now a new Content Server is to be added and all existing documents migrated into it. I have seen references in the past to SAP methodology for sizing the content server, but now cant find any.
    Thanks

    Dear John
    Please find these links on how to do SAP content Server sizing.
    https://websmp105.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006713092002E
    Please check this on service market place.
    With Regards
    Mangesh Pande
    Edited by: MANGESH PANDE on Feb 25, 2011 6:18 AM

  • SAP Content Server for DMS

    Hi All,
    Can any one tell how to implement DMS for our company. We are using R/3 4.6C on iseries maching having AS400.
    I read that we need to install Content server and Cache server. Will that be ok for us to use windows OS for installing content server and cache server to link to R/3 system.
    Can anyone guide me in this installation.
    Thanks,
    Sailesh K

    HI Sailesh,
    Please check note 355447 which describes about installation and other prerequisties.
    Cheers,
    Shyam

  • Http error 405 method not allowed sap content server windows

    Hi Expert,
    we have install sap content server 6.5 on microsoft windows 2012 using
    IIS 8.0 and MAXDB 7.9 SP 8 Build 21. After configuring the content server it self we still cannot
    create repository error "http error 405 method not allowed"
    Oac0 --> tab Create --> Content rep.
    I have implement note number 1704365 - IIS roles not created by
    default when installing Content Server on Windows 2008. even though it
    is not applicable to our IIS.
    when i try to open http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
    it always direct us to download file not showing the version number.
    is there any solution for this issue?
    Thanks a lot,

    Dear,
    Can you please try following URL ?
    http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046
    http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046&contRep=<Repository Name>
    Regards
    S S B

  • Https access to Sap Content Server 620 with R/3 46C

    We are trying to access the Sap Content Server 620 via Https.
    We do not want to administer it via HTTPS, (as we know CSADMIN doesn't support Https in rel. 46C as for note 712332). We want to do in way that the users when do check-in/out of originals these go across the
    network using Https instead Http.
    According note 712330 it should be possible.
    Anyone already did it ?
    Any suggestions ?
    NOte 506314 is not clear. We are in doubt how we applyed it.
    What we did:
    0)activate the SSL on the Sap COntent Server Web Site, requiring and installing a CA certificate.
    1)On the R/3 server in tx OAC0 with %HTTPS filled up the
    two boxes with "%HHTPS
    required"                                           
    1)unpacked the Sap criptolibrary and copied all the files (including those in ntintel subdirectory created during the unpacking) under c:\Programmi\Sap\Frontend\Sapgui on a frontend PC.                                                                               
    2)set the env. variable SAPHTTP=c:\Programmi\Sap\Frontend\Sapgui on 
    Frontend PC                                                                               
    3) from c:\Programmi\Sap\Frontend\Sapgui we created both the SAPSSLC.pse and the SAPSSLS.pse file with the command  :            
    3) from c:\Programmi\Sap\Frontend\Sapgui we created both the          
    SAPSSLC.pse and the SAPSSLS.pse file with the command  :              
    sapgenpse get_pse -noreq -p C:\Programmi\SAP\FrontEnd\SAPgui\<PSE-NAME>
    CN=localhost                                                                               
    4) we run the test: saphttp https://itmif069
    from the frontend to the server where the Content Server is (itmif069). We recive the error:
    trc file: "dev_http", trc level: 2, release: "620"
    Fri Oct 08 12:26:46 2004
    [2256] sccsid: @(#) $Id: //bas/620/src/krn/ftp/http.c#26 $ SAP
    [2256] HTTP Start : argc - 2 a0 - saphttp
    [2256] https//itmif069
    [2256] SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
    <<- SapSSLSetTraceFile()==SAP_O_K
    =================================================
    = SSL Initialization
      SapISSLComposeFilename(ssl_lib): using default "sapcrypto.dll"
      SapISSLComposeFilename(server_pse): using default "SAPSSLS.pse"
      SapISSLComposeFilename(client_pse): using default "SAPSSLC.pse"
      SapISSLComposeFilename(anon_pse): using default "SAPSSLA.pse"
    = found SAPCRYPTOLIB  5.5.5C pl16  (Jun 10 2004) MT-safe
    = found SECUDIR environment variable
    = using SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
    =  secudessl_Create_SSL_CTX():  PSE "SAPSSLA.pse" not found,
    =      using PSE "SAPSSLC.pse" as fallback
    = The Server SSL_CTX
    =    provides this ordered list of 9 ciphersuites:
    =       1.  SSL_RSA_WITH_RC4_128_SHA
    =       2.  SSL_RSA_WITH_RC4_128_MD5
    =       3.  SSL_RSA_WITH_3DES_EDE_CBC_SHA
    =       4.  SSL_RSA_WITH_DES_CBC_SHA
    =       5.  SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
    =       6.  SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
    =       7.  SSL_RSA_EXPORT_WITH_RC4_40_MD5
    =       8.  SSL_RSA_WITH_NULL_SHA
    =       9.  SSL_RSA_WITH_NULL_MD5
    = Success -- SapCryptoLib SSL ready!
    =================================================
    <<- SapSSLInit(, read_profile=0)==SAP_O_K
    ERROR => [2256] URI https//itmif069 [http.c       774]
    ERROR => [2256] Connect to Host  Port 443 error: NIECONN_REFUSED
    [http.c       777]
    We do not know if the criptolibrary ha to be instyalled to the R/3 server to.
    We do not know if the CA certificate instalelled on the Sap COntent Server web site has to be installed on the R/3 server too.
    Any suggestion ?
    Regards

    Caro Mauro,
    I'm more or less in the same situation right now.
    Taking into account that you ask for help on this subject last 2004 Oct. I suppose that you have probably solved the problem.
    Please can you help me with the solution implemented.
    Find below my current work e-mail adress
    [email protected]
    Thanks in advance,
    Best regards, Xavier Grau.

Maybe you are looking for