List all the points on an x,y grid

Im an artist working with random numbers and grids . I need to list all the points on an x,y grid from (1,1) to (100,100) and assign a random 1 or 0 to each of these points

cian hackett wrote:
Yeah 3 years in art college and my maths knowledge is all but gone here is a smaller sample of what i wish to do
this was done by hand and took forever
Much quicker here.
This was easier done in Pages, so I hope you will excuse the switch.
Formula for cell designation in column a of the table is:
=INT((ROW()-1)/10+1-0.1)&", "&MOD(ROW()-2,10)+1
I know it's difficult to read and can't be copied from the screen shot.
To get the entire table on one page, make the table Inline and set Text Layer columns to three.
Jerry

Similar Messages

Method for itunes to list all exclamation point songs

lost a bunch of my music couple thousand songs....is there an easy way to have itunes list all exlamation point songs.

Generally setting a common Album title and Album Artist will fix split albums.
For compilations of tracks by different artists set the album artist to Various Artists and also tick Album is a compilation of songs by various artists.
For deeper problems see Grouping tracks into albums.
tt2

How to print/list all the groups/users present in Weblogic using Java code

Hi,
Weblogic version : 11.1.1.5
How to print/list all the groups/users present in Weblogic using Java code
I want to make a remote connection to Weblogic server and print all the users/groups present in it.
I have gone through the below mentioned site, but I cannot use the same approach since most of the API' are deprecated for example "weblogic.management.MBeanHome;"
http://weblogic-wonders.com/weblogic/2010/11/10/list-users-and-groups-in-weblogic-using-jmx/
Thanks in advance,
Edited by: 984107 on 05-Feb-2013 05:26
Edited by: 984107 on 05-Feb-2013 22:59

see this http://www.techpaste.com/2012/06/managing-user-groups-wlst-scripts-weblogic/
Hope this helps.

How can I list all the domains configured for Weblogic Servers?

How can I list all the domains configured for Weblogic Servers?
I saw a note, which says the following:
"WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
In my case, I just want to list all the domains, is that possible by using any scripts?
Thanks
AJ

If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

When i go to the app store to update the one app that needs to be updated, the screen is blank. It used to list all the apps that need updating and have a button called update all. Now nothing. Just a blank screen.

when i go to the app store to update the one app that needs to be updated, the screen is blank. It used to list all the apps that need updating and have a button called update all. Now nothing. Just a blank screen. How can I fix this?

There's been a problem with this all day. Seems to be a server problem - wait a day and try again, or use itunes on the computer to update, that works.

Is there a way of listing all the current keyboard shortcuts?

Within a program is there a way of listing all the current keyboard shortcuts , in a sensible order?
I mean in shortcut order, giving the name of the menu option (or other function) alongside.
I often want this when I"m about to define my own keyboard shortcut, to see what's already taken.

dominic23 wrote:
https://discussions.apple.com/message/21487716#21487716
Hope this helps.
Not sure it does help. In http://support.apple.com/kb/PH10837 it says
If you assign a keyboard shortcut that already exists for another command or another app, your new shortcut won’t work. Find the menu command that’s using it and reassign the keyboard shortcut for that item.
I looking for a quick way to "find the menu command" - or even better, to avoid choosing one that's already being used.

How to list all the datatypes are being used in the database?

Is there any way you can list all the oracle datatypes are being used in the database?
Thanks,
Chau

Use USER_TAB_COLUMNS or DBA_TAB_COLUMNS to determing various data type but USER_TAB_COLUMNS will show you what type being used by a schema user

Using ms project 2007 and vba macro to list all the custom fields used in the project?

Hi,Using ms project 2007 vba macro, I would like to be able to list all the custom fields used in the project and their corresponding field names. e.g. let us say I create a calculated duration field and name it "expected duration" and the name
of the field I select is Duration1.
I am trying to write a macro that will list all the used custom fields such as the result would look like:
Duration1 ---> "expected duration"
Text1 ---> "anything"
Flag1 ---> "....."
Number1 ---> "..............."
Can anyone provide me with the solution?
Regards,
Chuck

John,
I found this module, which provides the the list of custom fields used in the project but does not provide the name given to the field. Here below is the module and hope you could help me achieve this by modifying the macro to list the renamed field.
' MSP Checks all Custom Task Fields
Sub checkfields2()
'This macro will check and report out which custom task fields are used
'It requires Project 2002 and above as it relies on the GetField
'and FieldNameToFieldConstant methods which were not introduced until
'2002.
'It does not include resource fields, however it is a simple matter to
'do it by replacing the pjTask constant with pjResource.
'Copyright Jack Dahlgren, Oct. 2004
Dim mycheck As Boolean
Dim myType, usedfields As String
Dim t As Task
Dim ts As Tasks
Dim i, it As Integer
Set ts = ActiveProject.Tasks
usedfields = "Custom Fields used in this file" & vbCrLf
myType = "Text"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 30
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Number"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 20
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Duration"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If Left(ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)), 2) <> "0 " Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Cost"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Start"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Finish"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
MsgBox usedfields
End Sub
This is what the module gives me. But I would like to have beside Text 1 the name that is shown as below. e.g Text1 is "Test".
Would you mind helping me achieve this?
Thanks in advance.
Chuck

How can I list all the column names of a table by programming?

Hi,
Now I want to write an function which has the following features:
Firstly, The function was given a parameter as table name.
Then, it will lists all the columns names of the table.
e.g
table: person
---firstName------lastName----+
       Michale               Jackson
We can get the columns 'firstname' and 'lastName' by calling the function with table name 'person'.
And I also wonder that where I can get reference book or any other materials?
Thanks.
Edited by: wenjing wang on Feb 15, 2008 6:42 AM
Edited by: wenjing wang on Feb 15, 2008 6:57 AM

hi,
hope the below code helps u. Just take the headee which contains the field name and split it like below and compare it with the field name u want here 'last name'.
here,
'First name' will be in wt_filedata1 and remaining field names in wt_filedata2, so 'do' continues.
c_tab must be the separator, either , or + or tab etc..
CODE:
read table person into wl_header index 1.
do.
    split wl_header at c_tab into: wt_filedata1 wt_filedata2.
    if wt_filedata1 <> 'lastname'.
      cnt1 = cnt1 + 1.
      wl_header = wt_filedata2.
    else.
      exit.
    endif.
enddo.
Please reward if it is useful.
regards,
sri

How to list all the rows from the table VBAK

Friends ,
How to list all the rows from the table VBAK.select query and the output list is appreciated.

Hi,
IF you want to select all the rows for VBAK-
Write-
Data:itab type table of VBAK,
wa like line of itab.
SELECT * FROM VBAK into table itab.
Itab is the internal table with type VBAK.
Loop at itab into wa.
Write: wa-field1,
endloop.

How to list all the fonts in an FLA?

Hello all,
I want to find a way to list all the fonts in my FLA files. I want to see that the developers get the fonts they need before the problems crop up - wild idea, I know. Using the edit/font mapping option seems to only show fonts which are missing or have been re-mapped. How do I get the FLA to give me the name of every font it's holding?

Not the answer you want, but the closest you're going to find:
Open the Movie Explorer (Window/Movie Explorer). Select the "A" button at the top of the panel and deselect all others. This gives you a list of all text in the FLA, with the font listed at the end of each line.

Moving all the points, in all instances, of a mask?

Next dumb question...
I've copied a series of masks over from one composition to another which uses footage that is slightly different. (the L and R in a stereo compostion).
How do I move all the points in a mask, such that it will also move all the points the same amount throughtout the timeline?
I hope that's clear. I've tracked an object in the L eye, but it's in a slightly different place in the right. I could shift the anchor point, but I'm trying to keep things simple.
Cheers!

You can't do it directly, masks don't work like that.
But you can work around the issue using track mattes. If you mask solids instead of the footage, and use those solids as track mattes applied to the footage, you can then reposition the solids at will.

I upload a podcast each week using Podcast Maker. When I search the iTunes Store to determine if the most recent one is listed all the podcasts are in random order. This week's is

I upload a podcast each week using Podcast Maker. When I search the iTunes Store to determine if the most recent one is listed all the podcasts are in random order. This week's is #14; last week's is #1. Any ideas how to correct this? The odd thing is that when you try to subscribe to the podcasts, they are listed in the proper order.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

HT1349 Does anyone know the location of the Apple page (under your Apple ID account) that lists all the products you have bought from or registered with Apple?

Does anyone know the location of the Apple page (under your Apple ID account) that lists all the products you have bought from or registered with Apple?

Thank you! After posting the question, I located another version of this same personal product information at: https://getsupport.apple.com/GetproductgroupList.do;jsessionid=Lh2lMR9SVZvsbPTdQ d1ywJH1pXnrC0kqLhnJjZjCnd3vnzJthgzW!1417360841. If you haven't signed in yet, just click on the link at the bottom to See Your Products.

How to list all the episodes in a podcast?

Hi!
iTunes 7.5.0.20 on Windows XP.
When subscribing to a podcast, I like to download all the old episodes. Easy enough to do most times (either use GET ALL option or individual GET per episode), but for some of the feeds I subscribe to iTunes doesn't list all the episodes available. Example: if the podcast has 100 episodes, iTunes will only list the last 80 or so. When I look at the same feed using another tool (Google Reader in my case), I see all 100 episodes there.
What's happening here? How can I get ALL the episodes associated with a feed?
I searched this forum (almost 300 answered questions) but if the information is there I missed it...
Thanks!
Fernando

Sometimes the episodes are available from the producer directly. Go to the podcast website to check. Sometimes they are listed in an archive area. Sometimes this is a limitation on the producer because of the hosting they use. For popular podcasts it is done to reduce bandwidth. In all but two cases in the past I have been able to get the old episodes from producer. In one of the two cases they admitted the really old files were lost, in the other they said the old files were of such bad quality compared to new ones that they no longer wanted to distribute them.

List all the points on an x,y grid

Similar Messages

Maybe you are looking for