List and justified text problems

I'm creating a PDF that uses justified text for all paragraphs and centered headers. One of the problems I'm having is that if the last sentance in a paragraph contains just a few words, it ends up far to spaced out. It ends up looking rediculous, in extreme cases there is a word against the left margine and one against the right margin. How do I limit the space allowed between words?
Second, how do I creat a numbered list without it indenting the left margin of the paragraph that comes after each number? I need the number to be indented, just as you would indent the first sentance of a paragraph, but the rest of the justified text needs to have the same left margin as the non-numbered paragraphs.
Third, how do I keep the space between the number and the text the same with justified text? As it is now, it changes to acount for the number of charicters in the line of text. I aso need to keep the distance for number to left margin the same, I'm just pressing the tab button twice right now. I'm not using the list function right now because of the margine issues, I'm just including the number in the text.

1. To prevent the last line of text from spacing out, make sure you use a hard return at the end of the last sentence in the paragraph. That marks it as the end of a paragraph, and Buzzword won't try to justify the last line of what it recognizes as a paragraph.
2. You can use the ruler to adjust the indents and margins for paragraphs. For more details, open up the Help documentation, click on Buzzword tips (it's under Using Buzzword on the left), then click on Editing, then select the first item -- How do I create indents. It's a little tricky, but I think that you'll find that it provides the control you're looking for. Note that when you're adjusting the formatting of list paragraphs, all paragraphs in that list that are at the same list level will have the same paragraph formatting.
3. I think that if you use the paragraph formatting (via the ruler, as noted in #2) and the list functionality, the problem of the inter-character spacing will go away.
Hope this is helpful!

Similar Messages

Justify text problems

Hi
i have some problems when i justify text in a page.
Exemple : i must put a rectangle back to a part of the text.
In preview mode, i see the rectangle not at the good place behind.
I note the fact that the justification is not the same in muse page that in preview mode or browser when i compare the two versions.
Any idea to fix problem ?
I use web safe font : Georgia
Thanks for your help and sorry for my bad english

What you are experiencing is common when displaying text on different browsers, leading tends to shift.
Here is a work around...
Create a Rectangle to the width of your text block (coloured in yellow). (See image below)
2. Copy the text you want highlighted in the box. (See image below)
3. Select and insertion point in your main paragraph and copy and paste the block of text into it. (see image below)
You can also set some padding to the text to give it some space around the box.

Upgraded to Adabe 10.1x reader and drag and drop text problems

I cannot drag and drop text from my saved PDF files to word files or for example, into online forms since upgrading to Adobe new reader version today. How can this problem be resolved?

So after a month of trying to figure all this out I FINALLY fixed the problem!
Before you do anything just go to your destop > right click personalize (this is for windows 7 - might be different for XP; I honestly forgot, but same idea) > find "window color" > select "advance appearance settings
(I think can be found by just typing "window color and appearance" in the search from the start menu).
Finally select "active title bar" (If the font is SEGOE UI, then following the link is the best thing to do; IF ITS NOT, I would think you can just follow the same steps and modify accordingly to how you want your fonts to look in iTunes). http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-to-change -system-default-font-in-all-parts/dfce15db-7337-420a-a42e-517521a8502e
Hopefully this helps!!! Worked for me!

4S Touchscreen, Orientation and Speak Text problems?

Hello my Fellow Nerds and/or iPhone lovers,
I have been having a number of problems using my touch screen on the iPhone 4S and I'm not sure if it's directly a hardware problem or simply I don't know how to use it. It seems as though when I make an attempt to select a single word and make the desired edit that more or less text happens to get selected. Same problem with paragraphs or other amounts of text as well that I am not able to select what I wish.
The main areas I've been using that feature is in Notes app, email messages and places just like here where I'm editing the text as I make my post. In The Notes App I don't know why but sometimes I'm getting a keyboard when I don't want it and sometimes I can't seem to correctly edit the text.
Just checking to see if anyone out there has had similar problems as well. I think this has something to do with the iOS 7 upgrade or simply that I don't know how to use my iPhone. I have just recently started using it much more for editing text. Maybe it's simply that I need a refresher on the screen use and editing text so if you happen to know a good Apple webpage or another link just let me know about that if you could.
My other issue that's ongoing that the screen orientation is flipping when I don't have the phone in that position. Again I think this is something to do with iOS 7 but perhaps not since is a new issue and I have never had problems with that in the past.
Part of the editing/screen orientation is related also to do with speaking text. Once text is selected, I don't always get the speak text button or when I try to touch the button it barfs out on me going through the small menu that you navigate.

Hello hrenshaw0128,
Texting is one of the most common forms of communications in today’s society. I can certainly see the value in having text messages working at all times! Hopefully, you will reconsider canceling your parents' service as we can partner together and resolve your messaging issues. I have a few questions to ask you in order to get clarification on the issue. What software version do you have on your Droid Incredible? Are you getting any error message(s) when trying to send or receive a text? What city and state are you located in? Below are a few troubleshooting steps for you to try on the device.
Check to ensure that you have the current software on your device.
Remove any unused apps from the device to free up device memory.
Delete your signature on your device if you have one.
Remove any 3rd party messaging apps.
Erase long threaded text messages from the text inbox.
Perform a factory reset on the device. (See link below)
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=30946
If you decide to perform a factory reset then it is encouraged to back up your contacts and calendar entries. Backup Assistant is an excellent app to store your contacts and calendar entries can be saved on your Gmail account. Also, be sure to save all of your music, pictures, and videos on a memory card prior to the reset. Once the device has been reset to it's factory state, there is a brief tutorial on how to reactivate and setup the device. After the completion of this tutorial, please test all voice, data, and text services. If you have any additional questions or concerns then feel free to reply to this message.
Thank you...
ArnettH_VZW
Follow us on Twitter @vzwsupport

Reading List and bookmarks sync problems

Hello,
I have search answers to my problems and tried all the solutions but it does not work.
https://discussions.apple.com/thread/3883515?searchText=Safari%20reading%20list% 20does%20not%20sync%20with%20iPad
I have an iMac on OS 10.9.5, and iPhone 4s and iPad3 on iOS 7.1.2...
My Safari setting on iCloud are on but the reading list and bookmarks do not sync in neither way...
The strange thing is that I can see that open tabs are syncing, on the iMac, when I search for smth, I can see it displays me the iClouds open tabs from the tablet and iphone... but that is all. no sync of bookmarks and reading list...
any suggestions ?

Hi,
I have the exact same problem (and not only with Safari but with the notes app as well): The information is not synced at all. I've tried toggling the check marks for "safari" and "notes" within the iCloud settings on both sides (iPhone as well as iMac) but it doesn't do anything .... the information does not sync at all!
I had this problem using Mavericks and now still have it using Yosemite. On my iPhone 4 I have the latest iOS version possible, 7.1.2.
BTW: Resetting the devices doesn't solve the problem either ... I already did a complete "restore" of the iPhone yesterday and still the syncing does not work!
BTW2: It seems that nothing gets synced anymore to my iPhone. I just notice that a new contact, added on my iMac, isn't available on my iPhone.
Any help would be welcomed ......

Access List and Conflict Resolution Problem!

My configuration for Allow and Deny is not allowing me to load images and CSS files through the gateway on a URLScraper channel.
I'm trying to figure out how to control access to resources using the Access List service, and I'm running into trouble. The Sun ONE Portal Server, Secure Remote Access 6.0 Administrator's Guide (Doc 816-6421-10) states:
Setting the Conflict Resolution Level
You can set the priority level for the dynamic attributes. If a user inherits multiple attribute templates, say from an organization and a role assignment, and there is a template conflict between the attributes in the two templates, the template with the highest priority is inherited. There are seven settings available ranging from Highest to Lowest.
See the Administration Guide, iPlanet Directory Server Access Management Edition for more details on conflict resolution.
Unfortunately the referenced Adminstration Guide for DSAME contains exactly 0 occurances of the word "conflict" in its 136 pages, so that reference was less than helpful. Chapter 17 of that document (Doc 816-5620-10) describes URL Policy Agent Attributes, which sheds some light on what the URL Deny and URL Allow settings mean. The key sentence is, "An empty Deny list will allow only those resources that are allowed by the Allow list."
So, I've set up my Access List services as follows:
o URL Deny is blank on all Access Lists
o URL Allow set as follows
---- isp
------- http://portal.acme.com/portal/* (company name changed to protect the guilty!)
---- acme.com organization
------- Conflict Resolution: Highest
------- http://portal.acme.com/portal/* (same as above)
---- Acme Customers Role - shared role for all Acme customers
------- Conflict Resolution: Medium
------- http://www.acme.com/*
------- http://support.acme.com/*
------- http://support2.acme.com/*
---- RoadRunner role - specific role for a specific customer
------- Conflict Resolution: Medium
------- http://roadrunnerinfo.acme.com/*
The Desktop services in each of the above two roles includes channels from the hosts in the URL Allow lists.
The behavior I'm seeing with this configuration is that the desktop channels include information from the scraped HTML, and the URLs are rewritten for the included images and CSS files and such. However, the gateway is denying access to the images referenced by the rewritten URL. That is, an image with a URL of https://portal.acme.com/http://roadrunnerinfo.acme.com/images/green.gif shows up as a broken image on the desktop. Attempting to access the URL to the image directly results in an "Access to this resource is denied !! Contact your administrator" error message.
If I set the conflict resolution on the acme.corp organization to Medium (or anything lower than the two role conflict resolution levels) results in the same error message as soon as the customer logs in (no desktop rendered). The same error occurs if I set the conflict resolution in the two roles to Highest (same as the top level organization), again with no desktop rendered on login.
If I put all the above referenced URLs in the acme.com organization Access List service, then I am successfully able to fetch all the resources (images, CSS, etc.) in the URLScraper HTML. Likewise if I put "*" in that Access List. However, this is less than ideal, as it would potentially allow other customers to view data that isn't theirs (Wile E. Coyote user should not be able to get to Road Runner data, and vice versa, and neither one of them should get at Acme private information!).
So, what am I doing wrong? Also, does anyone have any leads on where I can read up on how Access Lists and conflict resolution are supposed to work, since Sun neglected to include a valid reference in the Administrator's Guide, Portal Server 6.0 SRA?
Thanks!
-matt

Did you ever get anywhere with this. My experiments seem to inidicate that you cannot successfully combine Access and Deny directives, across roles or organizational defaults and a role.

N82 Animated SMS and Predictive Text Problems

I've just got a new N82 and think it's a great phone. I downloaded and installed the Animated SMS program from Nokia's software site and have a couple of problems! The first is that I've set my left direction shortcut to come up with a New Message, now it lists SMS, Email and MMS but no A-SMS, I have to go through the message icon in the main menu. The second problem is that when I open the A-SMS application up and I do use and like Predictive Texting, it doesn't work! Everytime I push a button to start texting nothing displays on the screen and SPELL comes up over the left softkey. Turn off Predictive Texting and it works, very annoying. Anyone else had any problems and anyone know a solution? Have contacted Nokia who haven't got back to me yet.

you might want to try FA136050 here
/t5/Software-Updates/Symbian-Anna-Troubleshooting/td-p/1127953
but i've always used the * button to scroll through options. once you move off the word it stops being a sequence of key presses and just becomes the letters as is.
There's no dignity in begging for kudos. Do it for the karma.

Thumbnail images, bigger images and some text PROBLEM

Unclear title, with an unclear problem.
What I'm wanting to do is, when I click on a thumbnail image, I want the content in the DIV on the right to change accordingly to display the image and information relating to the thumbnail you have just clicked. I'm using Dreamweaver CS5 on MAC:
- I have a page split into 2 vertical columns. On the left I have 6 thumbnail images in their individual DIVs, wrapped all together in another DIV container
- on the right of the page I have assigned a large DIV to display a big image with a description underneath of what the project was etc...
I know you can attach a behaviour to the thumbnail to change the big image on the right, but I have a short paragraph of text below the big image too, and I don't particularly want to make the image and text one huge image. I want to keep the text, text.
How do I do it? Is this a simple thing? or is there a lot of coding to do this with JQuery or Javascript or something? Is there something to do with Data record sets involved?
Is there a way of doing it that when you click on the thumbnail that it can load the relevant image and text into the DIV on the right?
Sorry if it's not clearly explained, not sure how to do it, therefore not sure if I'm describing it properly.
As always, all help and advice very welcome.

Hi Murray,
Here is a screenshot of the page in question.
- On the left are the thumbBox DIVS, (shown here, "thumbBox1")
- On the right there is a main container, "galleryDisplay"
- Within "galleryDisplay" there is a DIV for the large image, "galleryDisplayImage", and another DIV to display a paragraph of information on the project, "galleryDisplayInfo".
Just to repeat, I want that when you click on the "thumbBox1", that the content of "galleryDisplayImage" and "galleryDisplayInfo" change in accordance to the thumbnail clicked.
Murray *ACP* wrote:
The easy way to do this is to have each click on the thumbnail change the display Property of a container (containing both the image and the caption) from "none" to "block". In the column on the right, just line up a series of divs, each containing the desired image+caption, and use DW's Chage Property behavior on a null link surrounding the thumbnail. For example, a thumbnail image:
<a href="#" onClick="MM_changeProp('image-caption1','','display','block','DIV'); return false"><img src="path_to_thumb.jpg" width="165" height="50"></a>
Each click on a thumb would also have to change the display Property of all other image-caption containers to "none".
I don't understand what I have to do with the relevant large image and text. You say to "line up a series of divs"... I don't understand. Where do I "store" the image and text combinations for each project? I can understand how an image can be loaded into the image div, but how and from where do I load in the html text with css applied into the info div?
Can I change the content of 2 separate divs from one click?
Sorry for not being overly clear, but I can't get my head round this.
Thanks for your help. I'm sure I'll get there in the end with your expertise.

Preview and scrollable text problems

Is anyone else having problems getting the scrollable text function to work in an overlay to a fixed layout ePub? I have the latest version of InDesign CC, purchased last week.
Here is a picture of my file. As you can see, it's pretty darn simple. Content box is on the right. You can't see the entire box but It is long enough to fit all of my text. On the left, I created a container box, wider but shorter than the content box. I then selected the content and used Paste Into to put the content into the container. Next, I selected the container, went to Folio Overlays, and I designated the content box as vertical scrolling, start at upper left, and Vector format. But when when I tried to preview it (more on preview problems in a minute), the container appears as a simple text box with no scrolling capability. I've asked the Adobe help people and they don't seem to have any ideas yet.
As far as preview goes, well, I can export to Adobe Digital Editions or I can look at the page in Window/Interactive/EPUB Interactivity Preview. But File/Folio Preview just processes the page and then returns nothing. And the same thing happens when I hit Preview in the Folio Overlays panel.
I'd love to know if this is unique to my system or a common problem. Since I only purchased CC to produce annotated books, there is not much I can do without it. And if CC doesn't do it, does anyone have a suggestion for something a non-programmer could use to get the same result?
Thanks for any help.

Scrollable frames are a DPS -- Digital Publishing Suite-- function (as are all other effects from the Folio Overlay panel). Those are a different beast than Fixed-Layout EPUBs.
For fixed-layout, all interactivity is supported (any panel in the Windows > Interactive flyout) except for Forms, Page Transitions, and the two Animation presets Smoke and Blur. Note that the panels Folio Builder and Folio Overlays are not part of the Interactive group of panels.
I know it's very confusing!
If you're trying to create an *app* then you use DPS, and you should be asking this question in the DPS forum.
Digital Publishing Suite
If you're trying to create an *ebook* then this is the forum to post in.
You might find my new lynda.com video tutorial course, Creating Fixed Layout EPUBs from InDesign CC, to be helpful. A bunch of the videos are free and may be all you need. To watch the others, though, you'll need a subscription. You can use my Free Pass URL to get a free week of open access to all the lynda.com videos.
Watch the Online Video Course Creating Fixed-Layout EPUBs with InDesign CC
Free pass: http://lynda.com/freepass/amconcepcion
AM

Getting files from a business that uses Photoshop CS6. I use CS3 and have text problems

Hi, I'm getting files from a business that uses Photoshop CS6. I use CS3 and when I edit the text, the text moves to a different location even off screen.
Anyone know how to fix this?
It makes it hard to copy the text and imposible to change the color or make corrections.
This just started when they went to Photoshop CS6.
Thanks,
Jeffery

Ask the folks supplying you with files whether they've updated to the latest version... There were problems with Photoshop CS6 13.0.0. saving text layers in jumbled-up fashion.
-Noel

Nokia N95 send and recieve text problems

I have just bought the Nokia N95 and am not able to send or receive text messages. I can make calls, so I know that the service provider is correct.
I also phoned the help service of my provider who took me through the settings of network selection but it still won’t send or receive messages.
My messages I write go to out box but just display as failed. They also just display the number for the contact and not the name.
I don’t yet have a micro SD card installed so am reliant on the SIM and internal memory. From what I see the memory is not full either.
Am I missing something?
I’ve done this for settings: Main menu – Tools – Settings – Phone – Network – Operator selection – Options – Change – Manual – then it Searches – I choose anything other than my provider such as O2 or Tmobile and it says not allowed – then I choose my provider which it gives me confirmation of my home provider. I switch off the phone and then back on again so I am on the correct network. Still can’t send or receive any texts.
Has anyone had this happen to them and do you have the solution?
Many thanks

Your message center is provably not configured correctly. Go to message setting then message center. Ask your provider what is the message center number or get someone who have the same provider as you are & note down the message center & put it in your phone. If the message center is correct, you'll provably have software problem. Backup your phone & format your phone. Codes are in the sticky tread for codes.
/discussions/board/message?board.id=hardware&thread.id=6601
Message Edited by android on 31-Mar-2008 09:21 AM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

SWF File Size and Rollover Text Problem

Hi and thanks in advance for any input.
Two problems....
1. SWF File Size
I've made a fairly small (at least in my eyes its small) flash site. However, even tho there really isn't much content, the swf is already 2.4mb and I haven't even finished it. It loads fine on my internet speed, but im worried about general users with slower internet. Is there something i should be doing to get the file size down (hopefully without comprimising quality).
2. Text Buttons (Movie Clips)
The rollover function (Event Listener) for MCs containing text keeps running while the mouse is over the button. I.E. It isnt treating the text box as a button, its treating the text only as a button, so as you roll between one letter and another, the rollover is re-set and re-starts.
The Swf is here.
And the FLA is here. *EDIT* - How can i get this fla to you guys? this doesn't seem to work when i try to download file - it just gives a fla.txt file?
Thanks.
Zack.

Reduce bitmap quality (increase compression).
For each bitmap, select "custom quality" in the symbol properties and set it to no more than 80.
Set the mouseChildren property of the button movieclips to false to avoid mouse events from triggering by child objects (the text inside the movieclip).
services_inner.mouseChildren = false;
projects_inner.mouseChildren = false;
etc..

BBM and SMS texting problems

Have a Tour that doesn't play personalized ringtones for ppl for there sms txt, it started happining after updating to the new 5.0 software. Also ppl that i have as a bbm contact who txt me i'm having there txt go into my bbm message list as a second chat instead of keeping them seperate, its only happened to about 5 ppl in my bbm contacts out of 20 and is happeing with multiple carriers and different models of blackberry.
I've talked to verizon tech support many times and even BB tech support with no luck, I've down graded to the 4.7 version and everything worked but i'm not gonna pay this much for a plan and a phone thats not working the way it should.
I've tried changing all the settings many different ways and the only success i've had with the 5.0 was before i restored my contact list in bbm on the phone, it worked perfectly........So I manually added each pin in testing as i went and still are left with 5 that don't work.
What else can i do????

I DO NOT enjoy texting on my Blackberry. I really found it difficult after I upgraded, with the new threaded texting so I downgraded back to the original OS that my Blackberry Tour came with. I wish RIM could really step up their game and create an upgrade for my pphone that works correctly and is actually worth upgrading to......"Come on RIM your really losing ground here, all of us Blackberry owners expected so much more from you"

Align & Justify Text

Is there a way to do this in the Lync 2013 client?

If you want to center and justify text, I am afraid there is no such way to do this.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

The bullet list, numbered list and the normal text is not converting when I am converting from RH 9 to MS Word 2010

Hi all,
Greetings for the day
I am created a new CSS in Robohelp 9. I have also created a new template in Word 2010. The style sets for different information elements like (Heading, bullets, body text, ) are more or less same between the CSS and the new templates. I am also able to map the .css styles to Word template when I am converting from RH to Word as I am getting the necessary option in the drop-down list.
However, when the output is generated, the bullet, the numbered list and the body text is not converting at all. The body text works sometimes. However, the numbered list and bullet list is coming out as images.
If anybody knows the solution, I can share the .css and Word template.
Thanks in advance.
Regards,
Parag Deb

Create a new project with two or three topics containing lists of both types. Generate a printed output that shows the problem. Then zip it up and send it to me. See the Contact page on my site for instructions.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

List and justified text problems

Similar Messages

Maybe you are looking for