List box values in mosule pool
hi
i am currently working with screen exit where i am populating values to a list box using customl table.
the problem is that when i am creating new entries in custom table the old entries are also getting displayed in list box even though i have deleted previous entries.
here is the code
PROCESS ON VALUE-REQUEST.
Create drop down box for listbox1
FIELD proj-zz_list1 module create_listbox1.
MODULE create_listbox1 INPUT.
TYPE DECLERATION.
TYPES:
BEGIN OF ty_list1,
Data type for listbox field
list1 TYPE zgfbm_listbox1,
END OF ty_list1.
VARIABLES DECLARATION *
DATA:
Internal table used to store userfield.
li_list1 TYPE STANDARD TABLE OF ty_list1.
PROCESSING LOGIC *
clear: proj-zz_list1, li_list1.
Select listbox1 from value table into internal table
SELECT zz_list1
FROM zgfbm_list1
INTO TABLE li_list1.
Create listbox corresponding to field in proj table
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'PROJ-ZZ_LIST1'
value_org = 'S'
TABLES
value_tab = li_list1
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FREE li_list1.
ENDMODULE. " create_listbox1 INPUT
Put a breakpoint at the Select statement and checkout if the valure coming from value table
Message was edited by:
Chandrasekhar Jagarlamudi
Similar Messages
-
List box values in module pool
Hi All,
Plz help me out in this regard..
I have designed a screen with 20 list boxes around and i am getting values for list boxes also.the main problem is coming when after selecting values....
that is after selecting values if i press enter on the screen the values are over written by space..
The default value for list boxes are space.
how to over come this problem...Plz help me out
Regards,
SudhaPAI
MODULE user_command_1000 INPUT.
CASE sy-ucomm.
WHEN 'SAVER'.
IF zrule_date_from > zrule_date_to.
MESSAGE e000 WITH : 'RUN_VALIDITY_TO_DATE can not be Less'(001)
'Than RUN_VALIDITY_FROM_DATE'(002).
EXIT.
ENDIF.
IF zrule_date_to < sy-datum.
MESSAGE e000 WITH : 'RUN_VALIDITY_TO_DATE can not be Less'(003)
'Than System Date.'(004).
EXIT.
ENDIF.
wa_rule-zrule_date_from = zrule_date_from.
wa_rule-zrule_date_to = zrule_date_to.
wa_rule-zrule_name = zrule_name.
wa_rule-zrule_id = zrule_id.
wa_rule-zrule_pref = zrule_pref.
ONCATENATE 'Where' rule_for1a operator1a values1a
andor1 rule_for2a operator2a values2a
andor2 rule_for3a operator3a values3a
andor3 rule_for4a operator4a values4a
andor4 rule_for5a operator5a values5a
andor5 rule_for6a operator6a values6a
andor6 rule_for7a operator7a values7a
andor7 rule_for8a operator8a values8a
INTO wa_rule-zrule_clause SEPARATED BY space.
In this code andor6(7,8,etc) has (and or)
and operator8a(7a,6a etc) has (+,- <,>) and when i do enter these two get cleared. why does this happen?
MY PBO code is
MODULE status_1000 OUTPUT.
SET PF-STATUS 'RULE'.
SET TITLEBAR '1000'.
ENDMODULE. " STATUS_1000 OUTPUT
*& Module fill_lists OUTPUT
For Filling List Boxes
MODULE fill_lists OUTPUT.
**********1
name = 'ANDOR1'.
value-key = 1.
value-text = 'AND'.
MOVE value-text TO value-text.
APPEND value TO list.
value-key = 2.
value-text = 'OR'.
MOVE value-text TO value-text.
APPEND value TO list.
PERFORM LIST_BOX.
CLEAR LIST.
**************2
name = 'ANDOR2'.
value-key = 1.
value-text = 'AND'.
MOVE value-text TO value-text.
APPEND value TO list.
value-key = 2.
value-text = 'OR'.
MOVE value-text TO value-text.
APPEND value TO list.
PERFORM LIST_BOX.
CLEAR LIST.
************3
name = 'ANDOR3'.
value-key = 1.
value-text = 'AND'.
MOVE value-text TO value-text.
APPEND value TO list.
value-key = 2.
value-text = 'OR'.
MOVE value-text TO value-text.
APPEND value TO list.
PERFORM LIST_BOX.
CLEAR LIST.
etc. -
How to create dropwdown list box values and checkbox in screen painter.
Hi Experts,
I need to know the creation of dropdown list box values and the checkbox to use in screen painter.
I have 3 values to insert as:-
INR,USD,EUR
if user selects INR/USD/EUR, then it will store into the table field.
And also want to know the checkbox functioning in screen painter, i.e. what should we write in PBO/PAI.
I have found some sites to get knowledge, but didnot found anything that relates to my questions.
So please help me!
Thanks,
DeepanshuHi,
For dropdown list box in Screen create a input field and choose Drop down by index.
To populate the values write the logic in PBO as follows
TYPE-POOLS : VRM
DATA : field_id TYPE VRM_ID ,
values TYPE VRM_VALUES,
value LIKE LINE OF values.
PROCESS BEFORE OUTPUT
MODULE list_fill_100
MODULE list_fill_100 OUTPUT
SELECT f1 f2 f3 FROM tab WHERE condition.
value-KEY = f1.
value-TEXT = f2
APPEND value TO VALUES
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'i/o screen field'
values = values.
ENDMODULE. -
Multiple-Selection List Box Values in Multiple Columns
I am using InfoPath 2010 with SharePoint 2013. I have a form with a multiple-selection list box which has A LOT of choices. Instead of displaying all the choices in one column, is it possible to display the values of my list box in several
columns?Hi Andrea,
I agree with Brij, one multiple-selection list box is associated with one list field, we cannot use the one multiple selection list box value for other multiple selection list boxes, we need to create multiple choices for each multiple-selection list box
control in InfoPath form.
Thanks
Daniel Yang
TechNet Community Support -
Hi gurus
I have set list box value through vrm_set_value and in the screen level it's working fine
In the custom program I need to fetch data from table using that selected list box value , but its always coming blank .
please help me how to catch that list box value in the program .
ThanksThis is the code
*************SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : P_bukrs TYPE bukrs OBLIGATORY , " Company Code
p_psc TYPE psc_name OBLIGATORY ,
p_monat TYPE MONAT AS LISTBOX VISIBLE LENGTH 5 OBLIGATORY , " Quarter
p_gjahr TYPE gjahr DEFAULT sy-datum+0(4) OBLIGATORY . " Year
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS : P_KIND AS CHECKBOX USER-COMMAND abc , " Check Box
P_prcent(6) TYPE P DECIMALS c_val_three , " Take in kind percentage
p_prod TYPE PSA_PRODUCT AS LISTBOX VISIBLE LENGTH 10 . " Take in kind product
SELECTION-SCREEN END OF BLOCK b2.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN on BLOCK b1 .
Validate Company Codes.
PERFORM sub_validate_com_code.
Validate PSC
AT SELECTION-SCREEN on VALUE-REQUEST FOR p_psc .
PERFORM sub_validate_psc.
Validate Quarter
PERFORM sub_validate_quarter .
AT SELECTION-SCREEN on BLOCK b2 .
Validate Take in kind percentage
PERFORM sub_validate_percnt .
Validate Take in kind Percentage
PERFORM sub_prod_disp .
form sub_prod_disp .
populated internal table lt_prod_val .
LOOP AT SCREEN.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'p_prod'
values = lt_prod_val
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
in start of selection the p_prod is always coming initial . -
List Box Problem In MODULE POOL PROGRAM(EDIT MODE)
I Have Developed A MODULE POOL PROGRAM ,
It Basically Consists Of CREATE EDIT and DISPLAY Modes.
CREATE MODE:
When I am Creating For Example FORM NO 1,it is having Fields With drop down list box with values
A,B and C. if I Choose A then That form will Get Created With A value and Form 1 will be created.
EDIT MODE:
The same form If u want to edit In EDIT Mode ,it is displaying value A and it Showing the list box in the fillowing Manner.A,B,C,and A.(This is what the problem I am Facing Know).It Is Displaying the value two times.How to Avoid this ,PLs Help me in this regard.
Thaks & Regards,
Anuradha.Where ever you are populating the List Box, write a REFRESH statement just before that.
Means Refresh the old content and add new content -
Retaining List Box Value in Form Bean
Hi All,
I want to retain the List Box populated using the Form bean.
Right now when i display the List Box in a page and submit the Form and come back
to same page again I do not get List Box populated.
In the JPF I do not get the all values of the List Box. I only get the selected
value of the ListBox.
Thx
HiteshHi sudha,
1. We can also use the FM
F4IF_INT_TABLE_VALUE_REQUEST
(here u will be able to capture the value)
2.
DATA : BEGIN OF itab OCCURS 0,
bukrs LIKE t001-bukrs,
butxt LIKE t001-butxt,
END OF itab.
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BUKRS'
value_org = 'S'
dynprofield = 'MYLISTTAB'
dynpprog = sy-repid
dynpnr = sy-dynnr
TABLES
value_tab = itab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
3. In pai module,
use the code :
PROCESS ON VALUE-REQUEST.
field mylistab module abc.
where field = your field name
abc = module name (which contains the above coding in step 2)
regards,
amit m.
Message was edited by: Amit Mittal -
Hello,
Im using a WAD report with list box. When I filter the report the values are not changed in the list box. Is there a way that the user will see only the values which shown in the report?
Please Advice,
AmirAmir,
Change the List Box property to "Posted Values"
Arun
Assign points if useful -
Hi,
I have Developed List Box for Period. And in the Selection Screen it is showing the values
01/2007
02/2007
03/2007
04/2007
05/2007
06/2007
07/2007
08/2007
09/2007
01/2008
02/2008
03/2008
04/2008
05/2008
06/2008
07/2008
08/2008
09/2008
In the selection screen We have Customize local Layout Button in Standard Tool bar...
In Customize local Layout Button>options->Expert Tab-->
By selecting sort items by key Check box...The Dropdown list becomes comes like this.
01/2007
01/2008
02/2007
02/2008
03/2007
03/2008
04/2007
04/2008
05/2007
05/2008
06/2007
06/2008
07/2007
07/2008
08/2007
08/2008
09/2007
09/2008
Now, What i want is Eventhough i select In Customize local Layout Button>options->
Expert Tab-->By selecting sort items by key Check box
The output should come like this.
01/2007
02/2007
03/2007
04/2007
05/2007
06/2007
07/2007
08/2007
09/2007
01/2008
02/2008
03/2008
04/2008
05/2008
06/2008
07/2008
08/2008
09/2008
Edited by: Venkat on Dec 16, 2008 1:02 PMCould you please help me in this Regard?
This is the code which i have written
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) text-002 FOR FIELD p_perid1.
SELECTION-SCREEN POSITION 33.
PARAMETERS:p_perid1(7) TYPE c AS LISTBOX VISIBLE LENGTH 10 OBLIGATORY.
SELECTION-SCREEN COMMENT 45(4) text-003 FOR FIELD p_perid2.
SELECTION-SCREEN POSITION 50.
PARAMETERS:p_perid2(7) TYPE c AS LISTBOX VISIBLE LENGTH 10 OBLIGATORY.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
PERFORM get_period.
*& Form get_period
* text
FORM get_period .
DATA:v_year1 TYPE bdatj,
v_year2 TYPE bdatj,
v_year3 TYPE bdatj.
v_year1 = sy-datum+0(4) - 1.
v_year2 = sy-datum+0(4).
v_year3 = sy-datum+0(4) + 1.
DATA:it_periods1 TYPE TABLE OF periods,
it_periods2 TYPE TABLE OF periods,
it_periods3 TYPE TABLE OF periods.
DATA:wa_periods1 TYPE periods,
wa_periods2 TYPE periods,
wa_periods3 TYPE periods.
TYPES:BEGIN OF typ_perid,
period(7) TYPE c,
END OF typ_perid.
DATA:it_perid TYPE TABLE OF typ_perid,
wa_perid TYPE typ_perid.
CLEAR: wa_periods1,wa_periods2,wa_periods3,wa_perid,
pername,pervalue.
REFRESH:it_periods1,it_periods2,it_periods3,perlist.
CALL FUNCTION 'G_PERIODS_OF_YEAR_GET'
EXPORTING
variant = 'K4'
year = v_year1
TABLES
i_periods = it_periods1
EXCEPTIONS
variant_not_defined = 1
year_not_defined = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'G_PERIODS_OF_YEAR_GET'
EXPORTING
variant = 'K4'
year = v_year2
TABLES
i_periods = it_periods2
EXCEPTIONS
variant_not_defined = 1
year_not_defined = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'G_PERIODS_OF_YEAR_GET'
EXPORTING
variant = 'K4'
year = v_year3
TABLES
i_periods = it_periods3
EXCEPTIONS
variant_not_defined = 1
year_not_defined = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
SORT:it_periods1 BY datab,
it_periods2 BY datab,
it_periods3 BY datab.
LOOP AT it_periods1 INTO wa_periods1.
CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
EXPORTING
input = wa_periods1-datab+0(6)
IMPORTING
output = wa_perid-period.
APPEND:wa_perid TO it_perid.
CLEAR:wa_perid,wa_periods1.
ENDLOOP.
LOOP AT it_periods2 INTO wa_periods2.
CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
EXPORTING
input = wa_periods2-datab+0(6)
IMPORTING
output = wa_perid-period.
APPEND:wa_perid TO it_perid.
CLEAR:wa_perid,wa_periods2.
ENDLOOP.
LOOP AT it_periods3 INTO wa_periods3.
CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
EXPORTING
input = wa_periods3-datab+0(6)
IMPORTING
output = wa_perid-period.
APPEND:wa_perid TO it_perid.
CLEAR:wa_perid,wa_periods3.
ENDLOOP.
LOOP AT it_perid INTO wa_perid.
pervalue-key = wa_perid-period.
pervalue-text = wa_perid-period.
APPEND pervalue TO perlist.
ENDLOOP.
pername = 'P_PERID1'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = pername
values = perlist
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
EXPORTING
input = sy-datum+0(6)
IMPORTING
output = v_period1.
pername = 'P_PERID2'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = pername
values = perlist
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
p_perid1 = p_perid2 = v_period1.
ENDFORM. " GET_PERIOD -
On button click of Infopath forms select multi select list box values...
Hi,
We have multi select list box on one of the info path forms. We have placed on button on this form. If user clicks on this button we want to select some of the values in Multi select list box (check box).
Is it possible if yes how can we achieve it?
Thanks.
Regards,
Amit ChhatbarHi Amit,
From your description, you would like to check items in a multi-selection box when a button is clicked.
I’d recommend you make use of rules in InfoPath form, i.e. when button is clicked, then set a field’s value.
However, if you are using multi-selection box, then you could only set the value of one item at a time. If you want to select several items at once, then we could use code. For more information:
http://www.bizsupportonline.net/blog/2009/07/understanding-multiple-selection-list-box-infopath/
http://www.bizsupportonline.net/infopath2007/programmatically-select-all-items-multi-select-list-box.htm
If you are using several check boxes to replace multi-selection box, then it will be more easy. The rule could be that when this button is clicked, set a field’s value (check box field) to true and repeat it.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Populating fields based on list box values
I have created an application based off of a table and so the 1st page is the actual report and the 2nd page is the data entry form. I have changed the form elements (like text box to select list) etc.
I need to have (2) text box fields populated based on the value from the 2nd select list box. I created a pl/sql page process that will check the value of the select list and assign values to the text boxes. This is triggered when a POPULATE button is pressed.
When I select a truck number in the select list - nothing happens and the original select list values get reset back to original. There is another button used in order to insert the data so that's why I figured I needed to add another button to trigger the population of the text boxes from a table. Here is my pl/sql page process used to populate:
BEGIN
SELECT dr1_name, dr2_name
INTO
:P2_DRIVER_1, :P2_DRIVER_2
FROM
active_drivers a
WHERE
:P2_DRIVER_CODE = a.code;
END;
It is set to fire on submit - before computations and validations.
Regards,
JeffNot sure if this is the best way but it works for me
Make P2_DRIVER_CODE be a form element of Select List with Submit
Create 2 items, P2_DRVR1 and P2_DRVR2, of form element Hidden
Edit the P2_DRIVER_1 item. In the source region enter :P2_DRVR1 in Post Calculation Computation.
Edit the P2_DRIVER_2 item. In the source region enter :P2_DRVR2 in Post Calculation Computation.
Create a page rendering computation for item: P2_DRVR1.
Type: SQL Query
Computation Point: Before Header
Computation: SELECT dr1_name FROM active_drivers a WHERE a.code = :P2_DRIVER_CODE
Create a page rendering computation for item: P2_DRVR2.
Type: SQL Query
Computation Point: Before Header
Computation: SELECT dr2_name FROM active_drivers a WHERE a.code = :P2_DRIVER_CODE
When an item is selected in P2_DRIVER_CODE the page will submit/refresh, causing the computations to be fired. P2_DRIVER_1 and P2_DRIVER_2 will be populated by the return of the queries in the computations respectively.
P2_DRIVER_1 and P2_DRIVER_2 are still editable by the user (unless you define them as read only) but if you have another select list with submit on the form, if used, the page will refresh and the computation will run again overwriting what the user has entered.
Suppose I want the user to be able to change the defaults and keep from losing them (changed back to default) in case another item submits/refreshes the page.
Create a hidden item P2_DRIVER_CODE_CHANGE with the source of: Static Text. For the Default Value enter &P2_DRIVER_CODE. (include the period after &P2_DRIVER_CODE)
Edit the P2_DRVR1 and P2_DRVR2 computations and in the Conditional Computations region set:
Condition Type: Text in Expression 1 != Expression 2 (include &ITEM substitutions)
Expression1: &P2_DRIVER_CODE.
Expression2: &P2_DRIVER_CODE_CHANGE.
Hope this works for you,
Jeff -
Fetching sub-screen check box value in module pool
Hi,
i hav a req in which i craeted a sub-screen in a standard sap screen QA11 using screen -exit.
This sub-screen has two check box's for 2 approvals.I hav craeted as screen with this 2 check box and made that as a sub-screen to main screen.
I hav few validations to be performed on these 2 check-boxes.
1.Enabling and disabling of resp check-box based on some condition.This is happening as i hav written some logic in PBO of the screen.
2.Validations hav to be performed on the check-box like if user clicks a check-box that value has to be captured and stored in a Z custom table.My main issue comes here.i hav written some code in PAI,but when i put a break-point,that code is not at all getting triggered.
Kindly,let me know how can i get the check-box value from the sub-screen which is craeted in the standard screen of QA11 using screen-exit.
Thanks in advanceHi,
May be your code is written in PAI of some other screen.
check SY-DYNNR and also use this where you are checking chekbox value.
make sure your code is written in PAI of same subscreen
Thanks
Raghav M. -
How do I populate form fields depending on the value of a list box?
Hi,
Can anybody help me out here?
I'm creating a form where I'm needing to populate a number of fields (first name & last name) based on the value of a list box (values are 1,2,3,4,5,6) ie: if 3 is selected 3 sets of the first name and last name fields populate on the page for the user to fill out.
At this stage it is just a prototype site and there is no database running behind it.
Thanks
HaydenThis can only be solved if you have javascript coding skills. Without knowing more about what you want to do and why, I can only show you a skeleton of how your code should look, but consider this form select field -
<select onchange="populateForm()">
When a value is selected from that list, the "onchange" event will fire, and will call the javascript function called populateForm(). You need to define a function by that name somewhere on the page -
<script type="text/javascript">
//<![CDATA[
function populateForm(value) {
if value >0 { document.getElementById("fieldID").style.display='block' }
if value >1 { .... }
etc.
//]]>
</script>
The page itself would need to have ALL the fields already in the form, but with those that are to be revealed set to a style of display:none.
Obviously, this is a skinny skeleton. Each test in the function would reveal a new field on the page by changing its display style from "none" (which is how they should be set in the code) to "block". You would need a separate function for each type of field that might need to be chosen.
If this is well over your head, then I'm afraid you will be out of luck for this particular approach.... -
List Boxes on a Selection Screen
Hi,
I have a list box on the selection screen. In the At Selection Screen Output, I filled the List box with 12 Values.
Now, I want to default the List box value with one of those values.
So, after the CALL FM 'VRM_SET_VALUES', I say p_field = 'Value'.
But this Value is being shown in the Drop down list twice.
I could not understand the mistake.
Please suggest.
Thanks,
Suryakiran D.Hi suryakiran,
1. Its happening bcos
u must be giving NAME
2. give p_field = Key
3. ie. 1 for Jan
2 for Feb etc
in the FM VRM_SET_VALUES
we are filling the parameter VALUES
VALUES-key
VALUES-TEXT
so, give KEY, (and not text)
after calling this FM.
4.
REPORT abc.
TYPE-POOLS : vrm.
DATA : v TYPE vrm_values.
DATA : vw LIKE LINE OF v.
PARAMETERS : a(10) TYPE c AS LISTBOX VISIBLE LENGTH 10.
INITIALIZATION.
vw-key = '1'.
vw-text = 'Jan'.
APPEND vw TO v.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'A'
values = v
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
a = '1'.
Problem
a = 'Jan'.
regards,
amit m.
Message was edited by: Amit Mittal -
List box in dialog programming
Hi Frnds,
i am working on a complex scenario,
i want to print 3 list box.
first one i can show but the problem is with second one and third one.
first list box have three fields suppose
program
events
movies
when user will select either one , suppose he will select program
then in second listbox program releted entries should be displayed like fiction , non fiction.
and when he will select any entry then in third list box corresponding sub entries should be come.
all data i have in ztables.
i can make search help also.
any suggestion should be appreciated.
Thanks and Regards
vijayUse this program!
TYPE-POOLS: vrm.
DATA: name TYPE vrm_id, list TYPE vrm_values, value LIKE LINE OF list.
TABLES: sscrfields.
Selection screen
List box
PARAMETERS: ps_parm AS LISTBOX VISIBLE LENGTH 10
USER-COMMAND abc.
Radio buttons
PARAMETERS: rb1 RADIOBUTTON GROUP ab MODIF ID bl2,
rb2 RADIOBUTTON GROUP ab MODIF ID bl2,
rb3 RADIOBUTTON GROUP ab MODIF ID bl3.
INITIALIZATION.
Populate list box values
name = 'PS_PARM'.
value-key = '1'. value-text = 'Line 1'. APPEND value TO list.
value-key = '2'. value-text = 'Line 2'. APPEND value TO list.
AT SELECTION-SCREEN OUTPUT.
Set list box with value
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list.
Control the display of screen components
LOOP AT SCREEN.
IF ps_parm = 1.
IF screen-name = 'RB1' OR screen-name = 'RB2' .
screen-invisible = 0.
ELSEIF screen-name = 'RB3'.
screen-invisible = 1.
ENDIF.
MODIFY SCREEN.
ELSEIF ps_parm = 2.
IF screen-name = 'RB1' OR screen-name = 'RB2' .
screen-invisible = 1.
ELSEIF screen-name = 'RB3'.
screen-invisible = 0.
ENDIF.
MODIFY SCREEN.
ELSEIF ps_parm = space.
rb1 = 'X'.
clear: rb2,rb3.
IF screen-name = 'RB1' OR screen-name = 'RB2' OR
screen-name = 'RB3'.
screen-invisible = 0.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
AT SELECTION-SCREEN.
IF sscrfields-ucomm = 'ABC'.
ENDIF.
START-OF-SELECTION.
WRITE: / 'Parameter:', ps_parm.
And use:
AT-SELECTION-SCREEN on value request for p_yyyy.
if p_xxxx-key is not initial..
get the values required for second parameter...or listbox..
endif..
similarily for 3rd listbox also!
Maybe you are looking for
-
So I'm trying to get Home Directories up and running on a 10.6.8 Xserve (waiting until I get my NFS sharepoints migrated to a Linux server [for other reasons] before moving up to 10.7 Server). But posting here since that will be happening in the next
-
Can't copy files to NAS via smb
I'm trying to move my Logic files to a NAS in a RAID 1 configuration prior to installation of Logic 9. I'm connecting via Samba. However, I'm continually getting this error message after only a few files are copied: "The operation can't be completed
-
Inserting an hyperlink towards a (Mathematica) document in Keynote
Hi, hyperlinks seem to be restricted in Keynote. I want to add an hyperlink to an image (which I know how to do) towards a different document (a Mathematica demo). Since it is not a webpage nor another Keynote document nor a Quicktime, it seems impos
-
Duplicate records in generic data source
Hello, We have created a generic data source using a database view joing two tables MARA and MBEW. When we run the view in our DEV server, we get perfectly fine data. Now when run the same view in QA, we get duplicate records. Is it any thing to do w
-
Hello Everybody, I´m using the Rate Application for currency conversion but i still dont understand the logic applied when we run the FX_trans calc, i have 2 Business Rules one for Average and other for . Does anyone knows whats the logic applied? i