List editing of technical onjects based on Warranty

Dear Gurus;
Greetings!
I am working on a scenario where I need to give list of Equipments/ FL's based on there warranty status.
Means, if I enter warranty start & end date; system should give me equipments which fall under that warranty period.
How can I do this?
Thanks & Regards
Hemant

Hello SRN;
Can you pls. let me know  the procedure/ steps involved in using the exit?
Thanks & Regards
Hemant

Similar Messages

  • List editing display

    hi
    guys i have few queries
    1/ when i put any fied apart some standard field like plant,planner group,oredertype or notification type like iw38,iw28 or 29 or in il03,iho6
       i am geting error
    NO OBJECTS SELECTED   WHAT DOES IT MEAN AND WHY IT COMES
    2/IN CONFIG, THE SETTING FOR LIST EDITING I COULD NOT UNDERSTAND WHAT IS IT FOR
    like
    1/ influencing field
    2/fielsd selection and other tabs
    i go through several times in sap help but i could not find what is the purpose
    many times i get reply dont do any setting change on this      
    why and how can we use all list editing in a better way
    thank you

    hi
    iw39 is for slecting the order in display mode for the required parameters for example you can execute the search based on the order details,general data/adminstrative data/location data/account assignment .
    you can select the select based on the specific inputs , if the inputs are not matched then it will show No objects were selected
    selection screen display./change mode you have different transaction for different transaction you can have different slection parameters, for this you can create your own variant
    influencing is nothing but you are specifying with respect to some field,for example as i said before if you want to make the manufacture field mandatory then you can influence that field with repsect to equipemnt category,object type ie you can make the field mandatory for particular equipment catefory say M or Q
    regards
    thyagarajan

  • Add field TIDNR to list edit PM reports

    Hi,
    We have a requirement to add field TIDNR (Technical Identification number) from ITOB table into several list edit PM reports (IW28/29/38/39/64 to 69)
    I have read sap note [586523|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=586523] but this relates to adding customer defined fields and amending output structures and as the above field is a Sap standard field is it possible someone could give me some advice on how this could be done.
    Regards
    Gary

    Hi,
    For IW28:
    Create a custom append at the end of structure RIHQMEL_LIST.
    Create an implicit enhancement in the SAP programmes that need the new field (that you will have to find out yourself)
    Roy

  • How to see class/characteristics of measuring points in list editing screen

    Dear Sirs,
    I have created meauring points for several functional locations.These measuring points have been assigned classes and characteristics.
    How can I see these charactristics against measuring points in list edition screen(ALV Grid).
    Thanks and Regards,
    R N Sabat.

    Hi R N Sabat,
    As per my knowledge , no std SAP transaction will show you asked details, You need to go for development of this report.
    Please check with your technical team to get this in to ALV report.
    Riyaj

  • Question: To derive Query technical name based on RSZCALC table.

    Hello All -
    Could you please kindly help to share your thought on Link of Query table. I am interested to see the list of Queries using Exception Aggregation against particular Characteristic.
    I use RSZCALC table to get Information about Exception Aggregation, however, I am not sure how to get Query technical name.
    Could you please kindly share your thought, what table I should use to get Query Technical name based on data from RSZCALC? And appreciate to share your thought what column that I should use to link between those tables.
    Looking forward your feedback on this, and appreciate much.
    Thanks,
    Cheers,

    Also Refer this Wiki  , For More information about bex  query  tables.
    Relation between between BEX Query DefinitionTables - SAP NetWeaver Business Warehouse - SCN Wiki

  • How to redirect from list edit form to another page using jquery in sharepoint 2013

    hi friends i have been trying to find a way to redirect from list edit form to another page using javascript and jquery
    i found lot of codes online but non of them are working for me.
    what i need is i have to save the data in the form and after that it has to redirect to another page. it has to get the url from hyperlink field of the item.
    please help me in this regards

    Not sure if you have gone through below links:
    http://spservices.codeplex.com/wikipage?title=%24().SPServices.SPRedirectWithID
    http://blogs.askcts.com/2013/02/18/using-spservices-and-jquery-to-perform-a-redirect-from-a-sharepoint-list-newform-to-editform/
    Please ensure that you mark a question as Answered once you receive a satisfactory response.

  • Refreshing drop down list in a web template based on a query view

    Refreshing drop down list in a web template based on a query view  
    I have just developed my first set of portal pages displaying the results of Bex queries and query views in the SAP Netweaver portal. I developed the pages using web application designer. Each web template created with W.A.D is using a query or query view. In one template I have that is using a query view I am using a variable in my Bex query. This variable is of type customer exit, is set to variable is ready for input and calls some ABAP code which returns the current fiscal week number and year. When I run the query or query view in isolation through Bex analyzer the variables gets populated correctly. In my web template I have associated my variable from my query view to a drop down list box. However when I run the Iview created from this template the query results get refreshed but my drop down list box does not, it still shows last weeks week number. How do I get the drop down list box to refresh with the latest result from my customer exit variable?
    Regards
    Collin

    Hi  ,
    According to your description, my understanding is that you want to  filter a calendar based a look up column in SharePoint 2013.
    Calendar View not support OOTB filters connection. it is disabled for calendar view, you need to change view(not calendar view) so OOTB filters works and get connected to your view.
    You can achieve this using combination of jQuery and SharePoint OOB techniques.
    For jQuery filters refer to the  blog: enter SharePoint List Filters using jQuery
    Also you can filter Calendar View Web Part using JQuery and SPServices:
    http://blogs.visigo.com/chriscoulson/filter-a-sharepoint-calendar-list-with-a-date-picker/
    http://joshmccarty.com/2011/11/sharepoint-jquery-and-fullcalendar%E2%80%94now-with-spservices/
    http://spservices.codeplex.com/discussions/258846
    Another  way, you can have a look at the SPFilterCalendar :
    http://www.aasoftech.com/SitePages/How%20to%20Filter%20SharePoint%20Calendar%20Dynamically.aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • How to copy standard SAP list edit tcode IW28 , IW29 to our Z transtions...

    Hi friends,
    Can any one help me on this plz.
    Need two reports for Notifications List Edit, one for change mode and one for display mode.
    These reports need to be copied from the standard SAP list edit transactions IW28 and IW29.
    I. The selection and display variants for the customized notification list edit (ZIW28 & ZIW29) need to include the following custom fields:
    a) SONGS custom Notification attributes include:
    •     Significance level
    •     MRule code
    •     ARC
    •     “Feedback Required? “ checkbox
    b) PPD custom Notification attributes include:
    •     Outage Issue checkbox
    •     “Feedback Required? “ checkbox
    c) Order attributes to be included:
    •     Order Type
    •     Order system statuses
    •     Order users statuses
    •     Order Maint activity type
    •     Order Revision code
    d) Non-Energy Notification custom field attributes include:
    •     Circuit ID
    •     Caller Name
    •     Caller SAP Personnel No
    •     Caller Pax
    •     Caller Alt Phone
    •     Caller email
    •     Caller Company
    •     Caller Bus Unit
    •     Caller Dept
    •     Contact Name
    •     Contact SAP PERNR
    •     Contact PAX
    •     Contact Alt Phone
    •     Contact email
    •     Peregrine #
    •     Created by
    •     Closed by
    e) EAM Notification custom field attributes include:
    •     Location
    •     Elevation
    •     Room
    •     Column
    II. These fields need to be available on both selection and display variant screens. They will be grouped together on the Selection screen (as given in the layout). Also, these fields need to be variant configurable (include/exclude) on the Display screen. Report should make use of the ABAP List Viewer (ALV) functionality to permit standard SAP display results sorting, filtering, etc.
    III. The above requirement specifies that the identified custom fields need to be added to the Custom List Edit Display Variant. In addition, the Order Header Short Text (CAUFVD-KTEXT) and Order Delay Code (WA_COCI_AUFK-ZZDCODES) should only be added to the Custom List Edit Display Variant.
    IV. Delete the standard SAP section for "Selection Using IS-U Objects" and Display Variant fields from the custom list edit report.
    Thanks and regards,
    Ankitha.

    Hi,
    Copy RIQMEL20 program to your Z Program, and insert your custom fields.
    But i think it will be very difficult since it has many enhancement point and it's not recommended. And it also will give you much trouble in upgrading time.
    May be you can find screen exit for this program and add your custom fields, or just create your new z program.
    Regards,

  • Vendor code shall be editable for non-po based invoice

    hi,
    how to do Vendor code shall be editable for non-po based invoice.

    Hi Praveen,
    You cannot create a Invoice without reference to PO through MIRO,
    You can create a Invoice witout reference to PO throughj FB60 where you can enter the vendor of your choice.
    Cheers
    Chris

  • SAP Note 2111087 - enhancement to PM/QM list edit reports

    Hi,
    Has anyone experience of implementing the following SAP notes which appear to give enhanced functionality within commonly used PM/QM reports:-
    2111087 - Display of row count in list edit reports
    2079317 - Preparatory note for display of row count in list edit reports
    2079318 - Display of row count in PM list reports (SAP_APPL)
    2079384 - Display of row count in PM list reports (EA_APPL)
    2079386 - Display of row count in QM list reports (SAP_APPL)
    2079387 - Display of row count in QM list reports (EA_APPL)
    The above notes appear to enhance over 90 list edit reports within PM & QM and have been created from an improvement request within the EAM Customer Connect Cycle 3.
    No business functions need to be activated to use this function.
    Regards
    Gary B

    Hi Gary,
    I have implemented the note 2111087 and its related notes
      2079317
      2079318
      2079384
      2079386
      2079387
    as per the above notes the counter field is appearing in most of the transaction, which are listed in the Note 2079318 given by SAP.
    But still, the counter field does not appear in some of the transactions like IA08,IA09,IH06,IL05,IP15,IP16 and IP17.
    I have checked the dependent notes and searched for correction notes, but couldnt find any.
    Let me know if anyone has faced similar problem.
    Thanks in advance.
    Regards. Pavan

  • Addition of field in list editing for notification - IW28

    Hi Group,
    As per the client requirement, we are adding a additional field on the notification header using the user exit QQMA0001.
    Now i want to sort the notifications using the standard SAP list edit functionality i.e. IW28 but using my additional custom field.
    What i need to do to reflect this adiitional field there in list edit?
    Thanks

    Raghunandan Iyer,
    There is no user-exit required to append a structure, you just need an developer key.
    Appending the structure will not affect the standard system.
    Any appends will show up on the SPAU list. It is part of the upgrade process to review this SPAU list so it should be captured.
    Try it in a test/sandbox system...
    PeteA

  • List Edit Reports using Excel Displays

    Guys,
    I've known about this functionality for some time, but never got round to investigating the potential..
    In many of the PM/CS list-edit reports (e.g. IW38) we can also view the data in Excel format. SAP has provided two files as follows:
    - SAP_MM.XLS: has two macros assigned (ALV_SAP_Exit and ALV_CUS_Exit)
    - SAP_MM.XLS: no macro assignment
    See [OSS Note 548409|https://service.sap.com/sap/support/notes/548409] for more details relating to these files.
    You can copy the standard XLS files (see OSS Note) to your own customer specific files. You can then use the marcos within these fields to include pivot tables, charts, filters, images, etc.
    Also posted [here|http://www.sapfans.com/forums/viewtopic.php?f=7&t=333861]
    PeteA

    Hi,
    Note [696069|https://service.sap.com/sap/support/notes/696069] explains some security settings can help with this.
    -Paul

  • WBS List Editing

    Hi all...
    In WBS Element : Investment Reason field - Control tab we are using. So reuirement is how to get this field in Report ?
    I tried CN43N - WBS Element List Overview But Investment Reason field not found even in dynamic selection option also this field is not available.
    We are using ECC 6.0 Version.
    Regards,
    Swapnil Kharul

    Hi CS Babu,
    CN43N --- Dynamic selection option this field is available but if you take Dump/ Output this field not available anywhere also in variant.
    That means I hv to find out WBS List editing for single Investment Reason even though multiple selection option is available in Dynamic selection for CN43N
    Inv Reason is field of PRPS though not appearing.
    We are using ECC 6.0 Version.
    If I put multiple Invesment Reason System should give me those values in O/P column.
    Swapnil Kharul

  • Change structure for list editing of functional location

    What is the significance of change structure for list editing (t code il04) of functional location?

    just enter the functional locations you need to create and descriptions and save

  • How to make a select list editable or searchable like the combobox

    Does anybody know, How to make a select list editable or searchable like the combobox? Do we need a plugin here, where I can get it.

    Hi Nilesh,
    If this is what you are looking for http://apex.oracle.com/pls/apex/f?p=32395:3:1202144397644679
    get the combobox plug-in
    http://www.apex-plugin.com/oracle-apex-plugins/item-plugin/searchable-combobox.html
    I have not tried this though. Found it while searching for some other plug-ins.
    Regards,
    -Senthil

Maybe you are looking for