List editing report problem with IH08

Hi,
We have issue while executing IH08 transaction, it is taking long time to execute.
As per the performane requirement 10min time given from basis to run any programe and auto log out.
we have done customer fields addition in equipment master.
If any body had same issue and got resolved, pls up date us. We are using ECC6.0 and SAP_APPL at patch level of 13.

hi,
have you discussed with your Basis consultant... A readymade solution cannot be suggested as it depends on lot of factors including the no. of equipments you have created, system capacity, load etc.
I hope you might have already tried with restricted selection. Even with restricted selction is it taking this much time ? What is your observation for IE05 ? Is it working fine ?
Regards,
L.Balachandar

Similar Messages

SAP Note 2111087 - enhancement to PM/QM list edit reports

Hi,
Has anyone experience of implementing the following SAP notes which appear to give enhanced functionality within commonly used PM/QM reports:-
2111087 - Display of row count in list edit reports
2079317 - Preparatory note for display of row count in list edit reports
2079318 - Display of row count in PM list reports (SAP_APPL)
2079384 - Display of row count in PM list reports (EA_APPL)
2079386 - Display of row count in QM list reports (SAP_APPL)
2079387 - Display of row count in QM list reports (EA_APPL)
The above notes appear to enhance over 90 list edit reports within PM & QM and have been created from an improvement request within the EAM Customer Connect Cycle 3.
No business functions need to be activated to use this function.
Regards
Gary B

Hi Gary,
I have implemented the note 2111087 and its related notes
2079317
2079318
2079384
2079386
2079387
as per the above notes the counter field is appearing in most of the transaction, which are listed in the Note 2079318 given by SAP.
But still, the counter field does not appear in some of the transactions like IA08,IA09,IH06,IL05,IP15,IP16 and IP17.
I have checked the dependent notes and searched for correction notes, but couldnt find any.
Let me know if anyone has faced similar problem.
Thanks in advance.
Regards. Pavan

List Edit Reports using Excel Displays

Guys,
I've known about this functionality for some time, but never got round to investigating the potential..
In many of the PM/CS list-edit reports (e.g. IW38) we can also view the data in Excel format. SAP has provided two files as follows:
- SAP_MM.XLS: has two macros assigned (ALV_SAP_Exit and ALV_CUS_Exit)
- SAP_MM.XLS: no macro assignment
See [OSS Note 548409|https://service.sap.com/sap/support/notes/548409] for more details relating to these files.
You can copy the standard XLS files (see OSS Note) to your own customer specific files. You can then use the marcos within these fields to include pivot tables, charts, filters, images, etc.
Also posted [here|http://www.sapfans.com/forums/viewtopic.php?f=7&t=333861]
PeteA

Hi,
Note [696069|https://service.sap.com/sap/support/notes/696069] explains some security settings can help with this.
-Paul

Reporting problems with iTunes

Does anyone know how to report problems with updates to iTunes to Apple? I cannot find any way to contact them to alert them to bugs and problems.

And if you're an ADC member (the Online membership is free), you can use Apple's Bug Reporter.

HT4718 are there any reported problems with safari with the new OS X Mavericks?

My early 2008 iMac running OS X 10.9.2 all of the sudden has problems loading pages in safari. The problem timing is the same as the upgrade to Maverick. The computer is connecting to wifi and other devices such as iPhones and three PCs have no problems. The ISP is Xfinity. Are there any reported problems with Maverick and Safari?

Try searching.

Chrome (Windows NT 6.1 6.2) users reporting problems with loading and mouseevents - any insights?

For several years now, I have created simple studies (I do psychological stuff) to run online, recruiting participants through Amazon Mechanical Turk (AMT). I have had no problems until recently (last 6 to 9 months). Now, some AMT users are reporting problems with stimuli loading or buttons not responding immediately when clicked (e.g., advancing to a new screen). What is common amongst all the users experiencing problems is that they use Chrome, and they also tend to be Windows NT 6.1 or 6.2 users running Flash Player 12.0. But not a single Firefox, Safari, or MSE user has ever reported an issue. I'm just looking for help in troubleshooting this problem. Again, the studies I run are incredibly simple (e.g., no videos being loaded from server, etc.), mostly word presentation where I record time and x,y coordinates of mouse movements as they respond to questions. Would attempting to publish for another target version of Flash Player help? The default setting is to publish the .swf and .html wrapper for Flash Player version 11.7. Any ideas? I also use version 13.0.1 of Flash Professional CC to create my studies if it helps.

This is helpful. Thanks. So it would be to my advantage to play around with something like SWFObject 2?
http://www.adobe.com/mena_fr/devnet/flashplayer/articles/swfobject.html
Or is there something else you would recommend?
What I've been doing is a far cry from actual web development, but quite interested in learning more. This swfobject seems to get at what you are suggesting (I think).

Bridge CS4 edit history problem with OS change from XP to 7

I've changed my OS from XP to 7. After reinstalling software, Bridge CS4 no longer keeps my editing steps in the "edit history" metadata. The only steps recorded are that I've saved a file. I have the edit history box marked in preferences in both Bridge and PS, and have tried changing the metadata section in Preferences to session only, concise, and detailed. None of those choices make a difference. Any suggestions on how to get my edit history steps back in the metadata of Bridge? I use the edit history frequently! Thanks in advance!

Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1
Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
- click the embedded picture in Harm's message to enlarge to reading size

XL Reporter problem with SQL 2005

Hi,
We just migrated our SQL Server from 2000 to 2005. Everything seemed OK, until we tried to run XL Reporter addon. Our SQL 2005 is 64bit edition, and I heard the 64bit version has some problem with transferring data to Excel, for example.
has anybody had the some problem? How can we solve this?
Thanks.
Andre

Hi Andre,
Check this thread: Re: XLR - Terminal Server
It should be a problem if your PL is upgrade to new.
Thanks,
Gordon

Reporting problems with App Purchases

This method doesnt work:
http://support.apple.com/kb/HT1933
It is a bug in tTunes? Or have they changed the way to report problems?
Why are they still listing it on their site as the way to report problems? It just doesnt work....
25 billion downloads is obviously to much for them to handle.

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
 Cheers, Tom

How to use bugzilla to report problems with OVM

Hello,
I want to use bugzilla.oracle.com to post some problems with OVM 3.1.1. After registration process (follow the link received in the confirmed email)
I try to login, but it seems that it is not possible to login. Normally the login name should be displayed at the top of the window (I know it from bugzilla.redhat.com), but at Oracle I arrived again at https://bugzilla.oracle.com/bugzilla/index.cgi after login.
So in general it seems that it is not possbile to use bugzilla.oracle.com. All searches I tried display no results.
Has anyone some experience in this issue?
Edited by: pdbrmont on Aug 26, 2012 2:10 PM
Edited by: pdbrmont on Aug 26, 2012 2:12 PM

SRW.RUN_REPORT('report=ports paraform=no'|| :port));
in above syntax what is the error
please reply
You have two closing parenthesis that's why.-------------------------------------------------------------------------------
Where to put the code:
normally... You will put the code in before report trigger.
to define the parameter...
srw.run_report('parameter1=param_value');
insert ----> parameter1=param_value <-- somewhere in the comand line, there should be no problem with that.

My Book Studio edition 1Tb problems with Leopard

I bought a My Book Studio Edition 1TB to back up to using Time machine from my Mac Pro OS 10.5.8 connected via Firewire.
The drive is described as being able to shut down when the Mac is powered down. It doesn't.
Also the WD Drive Manager supplied doesn't work as it supposed to.
Is this a compatibility problem with the WD My Book drive and Leopard? has anybody else had this problem?
Thanks.

I really don't know. The WD Manager may not work because it may only work with Windows. You may want to try repartitioning and reformatting the drive as follows:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
This should enable it to work with OS X properly. However, only if this is a notebook drive system can it be bus powered. If so then you would have to connect it to a USB port if you want the drive to turn off when the computer is shut down or put to sleep. FireWire ports do not power down when the computer is shut down or asleep.

Cannot "Report problem" with recent purchase.

I am using Windows 7 Pro w/ Internet Explorer 11 and iTunes v11.1.3.8. Both these are latest versions as far as I know. Despite this, when I go to report a problem with a recent download, IE shows a message I must be using the latest versions of these two applications in order report the problem.
What to do about this?

If it is an issue with a song not playing correctly, you may be able to re-download it with iTunes in the cloud beta. Log in to your account, click on "Purchased" in the Quicklinks section, and re-download the song.

Reporting Problems with Overground Cables on Poles

A number of houses where I live have their phone lines carried on poles. The cables pass close to and through branches of trees and several of the cables are likely to be damaged very soon as some are being dragged down by the weight of the branches.
Is there a way of reporting this to BT such that they can possibly take proactive steps to avoid the problem rather than waiting for the lines to break as they have done previously?
The fault reporting problem goes via a line check which won't fail.
Thanks.

Here is the link you need
http://www.openreach.co.uk/orpg/home/contactus/tellussomething/tellussomethingaboutournetwork/tellab...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Report Problems with nvl...

Hi,
I have a problem with a report in my application.
On the page, there are two items, a submit button and a report.
I intend to use this to search the report for the two attributs, which are in the items.
The report should show the result, even if no item or only one item is filled...
For this my idea is to use nvl expressions in the where clause like this:
WHERE attribut1 = NVL(:P1_ITEM_ATTRIBUT1, attribut1)
AND attribut2 = NVL(:P1_ITEM_ATTRIBUT2, attribut2)
But the problem is, that when only the second item(attribut2) is filled, all data of the table appears, because the first item(attribut1) is empty....
Does anybody have an idea, how to solve that?
I hope you understand my problem!
Thank you,
Tim

Tim,
Maybe something like this would work for you:
WHERE (attribut1 = :P1_ITEM_ATTRIBUT1 or :P1_ITEM_ATTRIBUT1 is Null)
AND (attribut2 = :P1_ITEM_ATTRIBUT2 or :P1_ITEM_ATTRIBUT2 is Null)Doug

Multicolumn report: problem with continuous section breaks

Hi All,
There is a need to create RTF template which consists of 3 logical parts:
(1) Static text -> some kind of header information;
(2) Multicolumn (2 columns) text -> contract terms;
(3) Static text -> information about signers;
Here is a small screenshot as an example:
Click for full size
The problem is that MS Word will place continuous section breaks before and after multicolumn part. And BI Publisher will transform these section breaks into page breaks. As a result each of 3 parts will be on its own page.
Does anyone have a solution or workaround to avoid such behavior?
Or can advice anything?
Thanks in advance.
P.S. Partly solution is to put the 1st part into page header. In this case MS Word won’t place continuous section break before multicolumn part. But still there is a problem with the 3rd part as it will go to separate page :(

Thanks for suggestion.
I've already tried such approach and unfortunately it didn't work.
If there is only "2 column" text in main template with the subtemplate calls before and after text, then text from subtemplates is appended to 2 column text and also formated as "2 column" text.
Here is an example files: URL was removed
XML file is empty as at this moment it is not important.
Purpose is to get all 3 sections without page breaks.
Section 2 can be 2-3 pages big.
Edited by: user534692 on Aug 12, 2009 8:04 AM

List editing report problem with IH08

Similar Messages

Maybe you are looking for