List Manager - next doesn't work

Hi,
I have added list manager in my form. For some reason, search works but not the 'next' button. Please advice. Thanks,
Lakshmi

Lakshmi - 1) Describe every attribute of the item and show the LOV query, 2) put your application on a publicly accessible site so others can inspect it. FYI, I have no trouble with a list manager item in 1.6.1.
Scott

Similar Messages

AnyConnect Client profile: group-url in server-list with OGS doesn't work propertly

Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 7.0(2)
Hardware:   ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
#show webvpn anyconnect
1.disk0:/anyconnect-win-3.1.00495-k9.pkg 1 dyn-regex=/Windows NT/
   CISCO STC win2k+
   3,1,00495
   Hostscan Version 3.1.00495
Profile in atthach-file. After this profile is uploaded to client Optimal Gateway Selection doesn't work propertly:
When 'vpn1.mydomain.com/mygroup' (it best TTL server) is unreachable, then OGS try to be connected to other servers, but without group-url, for example 'vpn2.mydomain.com' (instead of 'vpn2.mydomain.com/mygroup')

Anton,
It MIGHT be cosmetic:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtz92140
If not please open up a TAC case and provide DART for such a connection.
M.

Extension Manager CC doesn't work with Photoshop v14

When I try to add something to Photoshop the extension manager says it only works with Photoshop V13 . When is this going to be fixed?

When I try to add something to Photoshop the extension manager says it only works with Photoshop V13 . When is this going to be fixed?

GT60 boots to Bigfoot boot manager, keyboard doesn't work

I was attempting to install Ubuntu 13.10, and aborted the process to partition the 1TB HDD with a GParted Live CD. When I rebooted the computer to boot the GParted Live CD, the keyboard didn't work, and I was unable to do anything with the Live CD. I rebooted again, removed the Live CD, and found that the keyboard still doesn't work, and Windows 8 wont load. The MSI splash screen comes up, followed by something about Bigfoot Boot Agent, "press shift+F10 to configure", splash screen again, and then this:
"Intel UNDI, PXE-2.0 (build 083)
Copyright (C) 1997-2000 Intel Corporation
Fort Bigfoot PCIE Ethernet Controller v2.1.1.1(02/09/12)
Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
Rebot and Select proper Boot device
or Insert Boot Media in selected Boot device and press a key_"
Since the keyboard isn't working, I'm unable get to the BIOS(which is set to legacy and SecureBoot is disabled for booting non-Windows Live CD) and unable to "press a key", let alone press shift+F10 to configure Bigfoot Boot Agent. I can still boot the Live CDs I have, so I'm thinking of downloading one of the Live CDs from lifehacker's "Five Best System Rescue Discs" topic. Should I even bother, or should I just try to get it repaired by a professional?

Quote from: darkhawk on 10-February-14, 12:31:42
You're 12?.....
No idea what happened though. Hard to say with the rather vague description thus far.
"I am 12 and what is this?" is a somewhat aged meme. I apologize for the vague description; it was all I had to work with.

Extension Manager CC doesn't work

I disabled all plugins for InDesign but it doesn't work.
Regards
Bartek
P.S. Nice icon for Flash CC

I disabled all plugins for InDesign but it doesn't work.
Regards
Bartek
P.S. Nice icon for Flash CC

Manually Manage Podcasts doesn't work

I set my songs to update automatically, and my podcasts are set to "Manually manage podcasts." However, when I try to drag a podcast to the iPod icon (or the iPod>Podcasts icon), the file just bounces back and doesn't get transferred. Can anyone help?
Thanks.
iMac 17" Intel Mac OS X (10.4.6) iPod with Video 30GB

I'm trying to drag individual episodes, but to no avail.
Incidentally, when I view the iPod's contents in iTunes, everything (podcasts and individual songs alike) appears grey, and are not clickable at all.

Enterprise Management Console doesn't work!

Hi, there,
I meet a strange problem. I use JDeveloper to make jsp project. the database is oracle 9i. I install JDeveloper and database on the same machine. at first, everything is ok. but suddenly I found that I can't run Enterprise Manager Console. the icon in the start meun became unrecognize. if I run the command on the command line, it's refused. I don't know what's the reason. but what's more strange is that I can run jsp project and store and retrieve data from database. I really don't know the reason, besides, how can I change database structure and view data stored in the database without Enterprise Manager Console?
my project will be used on the next week, but I don't know if this problem will effect funcation!
does there anyone know the reason and how can I resolve it? besides, my OS is windows xp professional.
any hint will be great appreciated!!

You can view your all values from Jdeveloper only .
Go for connection Database and click on user than u can c database structure and all tables views ....
Hope it helps

Oracle Enterprise Management Console doesn't work

Hi, there,
I meet a strange problem. I use JDeveloper to make jsp project. the database is oracle 9i. I install JDeveloper and database on the same machine. at first, everything is ok. but suddenly I found that I can't run Enterprise Manager Console. the icon in the start meun became unrecognize. if I run the command on the command line, it's refused. I don't know what's the reason. but what's more strange is that I can run jsp project and store and retrieve data from database. I really don't know the reason, besides, how can I change database structure and view data stored in the database without Enterprise Manager Console?
my project will be used on the next week, but I don't know if this problem will effect funcation!
does there anyone know the reason and how can I resolve it? besides, my OS is windows xp professional.
any hint will be great appreciated!!

You can view your all values from Jdeveloper only .
Go for connection Database and click on user than u can c database structure and all tables views ....
Hope it helps

"Manage" link doesn't work under Profile Account...

Hey all, couldn't work out where to launch bug reports so this will have to do.
Skype Version: 6.20.0.104
Reproducing steps:
Open skype and login
Click your name in the top LHS
Wait for "profile" screen to load
Under "Accounts:" click the "manage" link
Nothing happens

I can confirm this issue. Please access your Skype web account page via the menu "Skype -> Account..." instead. I'll also make sure our product team is aware.
Just tested again: Actually the "Manage" link below my Skype name in the "Accounts" section of the profile works for me. But the "Manage account" header further down is not clickable for me. Only the blue arroe to the right of that is. Still: If you have trouble accessing your account page, please access your Skype web account page via the menu "Skype -> Account...".
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Added search fld dflt. Now recs automatically displayed, Next doesn't work

I have a page that contains 4 search fields at the top and a report region at the bottom.
I was setting a default for 2 of the fields and when I displayed the page, I would need to click on Go to execute the query and display the report.
Then, I added a default for the 3rd parameter (the 4th still has no default).
Now when I display the page, records that match the 3 defaulted search parameters are automatically displayed, but when I click on Next> , no records are found.
If I click on Go to redisplay the first page and then click on Next> the records are found, however.
I'm new to APEX and don't understand why records are automatically being displayed now.
Can anyone tell me how to turn that off?
Thanks!

Hi Laura,
Yes, the report will always be run unless you have a Condition set that stops this. This is something that is required sometimes.
Firstly, if you need to set a default value for a Select List that is used as a filter for a report, you should do this as a Computation that is run in the Before Header process point and conditional on the value of the item being null.
To ensure that the report is only run when the user clicks the Search button, you have to create a hidden page item (called, say, P1_SHOW_REPORT) that has a default value of 0 (I use 0 to hide the report and 1 to display it - but you can, of course, any values you like). Again, set the default for this using a conditional computation. Now set the report region to be conditional on P1_SHOW_REPORT being equal to 1.
When the page is first loaded, the value of P1_SHOW_REPORT is defaulted to 0, so the condition on the report region would fail and the report is not shown.
Now, in the branch triggered by the Search button, enter P1_SHOW_REPORT in the "Set these items" setting and enter 1 in the "With these values" setting.
I assume that you have a Reset button? If not, create one. This should give you another branch triggered by this button - on the definition for this branch, enter in the page number in the Clear Cache setting.
Now, when the user makes any selection on your filters, the report is not run automatically. However, when the user clicks the Search button, P1_SHOW_REPORT is set to 1, the region condition passes, so the report is run using their selections. When they need to, they click the Reset button - the P1_SHOW_REPORT and the filters are reset to their defaults and the report region is hidden again.
Andy

SOA fault management framework doesn't work

The following is my fault-policies.xml and fault-binding.xml. Both are located in the same folder as the composite.xml. I simulated a remote fault. The fault was not caught by the framework.
I even re-started both admin server and soa managed server.
I am using SOA 11.1.1.5
1. fault-binding.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<faultPolicyBindings version="2.0.1"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchemainstance">
<composite faultPolicy="POProcessingFaults"/>
</faultPolicyBindings>
2. fault-policies.xml
<?xml version="1.0" encoding="UTF-8" ?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy">
<faultPolicy version="2.0.1"
id="POProcessingFaults"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/ XMLSchema-instance">
<Conditions>

<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension" name="bpelx:remoteFault">
<condition>
<action ref="ora-human-intervention"/>
</condition>
</faultName>


</Conditions>
<Actions>


<Action id="my-java-handler">
<javaAction className="soatraining.faulthandling.MyFaultHandler"
defaultAction="ora-terminate" propertySet="myProps">
<returnValue value="OK" ref="ora-rethrow-fault"/>
</javaAction>
</Action>

<Action id="ora-retry">
<retry>
<retryCount>4</retryCount>
<retryInterval>2</retryInterval>
<exponentialBackoff/>
</retry>
</Action>

<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>

<Action id="ora-human-intervention">
<humanIntervention/>
</Action>

<Action id="ora-terminate">
<abort/>
</Action>
</Actions>

<Properties>

<propertySet name="myProps">
<property name="logFileName">myfaulthandler.log</property>
<property name="logFileDir">c:\temp</property>
</propertySet>

</Properties>
</faultPolicy>
</faultPolicies>

Please use the below files and let me know...
fault-policies.xml
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy">
<faultPolicy version="2.0.1" id="bpelFaultHandling"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:bindingFault">
<condition>
<action ref="ora-retry"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-retry"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id = "ora-rethrow-fault">
<rethrowFault/>
</Action>
<Action id = "ora-retry">
<retry>
<retryCount>5</retryCount>
<retryInterval>1</retryInterval>
<exponentialBackoff/>
<retryFailureAction ref = "ora-rethrow-fault"/>
</retry>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
fault-bindings.xml
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicyBindings version="2.0.1"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<composite faultPolicy="bpelFaultHandling"/>
</faultPolicyBindings>
Write two composites A and B . A is Asynchronous and B is Synchronous. Call B from A, just throw a remotefault from B; put the above two files in composite A in the folder where the composite.xml file resides.And also keep a catchALL block at the BPEL process level for the composite A. So when you execute A, The fault policies will come into play, try the same invoke for five times and rethrow the fault which will be caught by catchALL block in composite A and do something from A, either invoke back the caller or write some error message to the file or email or something else.
Hope this helps...
Thanks,
N

EA1 - Manage Database doesn't work

Environment:
Windows 2000
Connected to Oracle 10.2 or 9.2 (Using oracle spatial)
Right click on a connection and go Manage Database.
It brings up a tab with this text in the middle of it
Only Oracle connections are currently supported to display status.
Am I doing something wrong here?

You not doing anything wrong there's a bug logged on this.
-kris

"EXPORTING LIST TO MEMORY" doesn't work

Hi experts!
In my program I need to update a vew deliveries using transaction VT04 and get from log numbers of updated deliveries. My code is:
SUBMIT RV56TRGN USING SELECTION-SET 'VAN SALE/VT04'
EXPORTING LIST TO MEMORY AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = list_tab
EXCEPTIONS
not_found = 1
OTHERS = 2.
I get error:
"Set screen is not allowed in subscreens"
But when I run code:
SUBMIT RV56TRGN USING SELECTION-SET 'VAN SALE/VT04' AND RETURN.
It runs OK.
Where may be the problem?

test

PM8M3-V The LAN network is not appear on device manager and doesn't Work

After I reinstall the XP2 and install the MSI chipset drive the original CD
i cant see the device LAN network on device manager.
then i check the BIOS that On-board LAN Control is show Disable.
Then i change it to Enable and restart.
it cant boot the Win XP. It just showing (verifying DMI pool data) on black screen.
when i install new PCI network card, It just showing (verifying DMI pool data) on black screen also.
thanks for help!!!
Processor 3.2
PM8M3-V
1G DDR RAM
Built-In network

Did you ensure that the onboard lan is enable in bios? Quote
verifying DMI pool data
sound like a corrupt boot files or some failure hardware.

CSV Software snapshot life cycle management mechanism doesn't work at all

Hello.
I have Hyper-V cluster on Microsoft Windows server 2012 R2 update1. Free space on one of the CSV constantly decreases during the backup of VMs that are on this CSV. In the System log a node that owns this CSV there are a lot of entries like:
"Volume CSV03_HDD (\Device\HarddiskVolumeShadowCopy2884) is healthy. No action is needed." Event ID = 98
I think there is a constant increase in the number of snapshots on this CSV.
I want apply SnapshotAgeLimit value from
http://support.microsoft.com/kb/2935810 , and set it to 1. But nothing has changed.
Is there a way to forcibly remove old snapshot on CSV ?

Hi StDenis,
Please make sure the AD object exist for the cluster CNO and the CNO not be disabled.
Please see the following article
and install the update listed there.
      Recommended hotfixes and update for Windows Server 2012 R2-based failover clusters.
http://support.microsoft.com/kb/2920151
3. Please make sure the HBA Drivers and Firmware are up to date.
4.
Run the chkdsk on your CSV to check whether there have any error.
5. Please make sure he Bios, Drivers and Firmware on the server are up to date.
  6. We will also need to check all hardware between the cluster and the san for errors.
      "Switches, Cables, and connectors
More information please see the following article.
How to Run ChkDsk and Defrag on Cluster Shared Volumes in Windows Server 2012 R2
http://blogs.msdn.com/b/clustering/archive/2014/01/02/10486462.aspx
How to recover a deleted computer object that supports a Network Name resource in a Windows Server 2008 or Windows Server 2008 R2 failover cluster
http://support.microsoft.com/kb/950805
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

List Manager - next doesn't work

Similar Messages

Maybe you are looking for