List metadata navigation and columns filters not working.
Hi
I'm having an issue with SP 2013 whereby if I apply a filter through metadata navigation subsequent columns filters don't get applied.
Here I've applied a filter through the navigation and it applies the filter successfully to the documents in the library
If I now apply a column filter by content type and select the value Promotion Calendar, I get the following
It appears the filter is selected and I can indeed see the filter applied via the dropdown but it doesn't apply the filter to the list view. I've confirmed this also on another environment using different columns for the metadata navigation.
The environments are patched to Dec 2013 CU.
Thanks
Hi
Matt Williams3 ,
The scenario is be default that Managed Metadata navigation tree in document libraries does not allow further filtering on other columns.
For a workaround, you can use Key Filters instead.
For more information, you can refer to the blogs:
Set up metadata navigation for a list or library
How to Use Metadata Navigation and Filtering in
SharePoint 2013
Reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/78881468-308d-4305-8454-c67fceb05fea/managed-metadata-navigation-tree-in-document-libraries-does-not-allow-further-filtering-on-other?forum=sharepointsearch
Best Regards,
Eric
Eric Tao
TechNet Community Support
Similar Messages
-
Document Library Template with Metadata Navigation and Key Filters
When saving a document library as a template, any configured metadata navigation and key filters columns are lost. Has anyone else experienced this issue or know a viable workaround? Can anyone shed some light on why these settings are not saved with
the template?
Thanks!
Wade Hunter MCP/MCTS - WSS 3.0, MOSS 2007, SharePoint 2010Wade,
Did you figure out a workaround or why this happens? I am having the same problem.
Thanks -
I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.
Only the carrier that the iPhone was locked to can unlock. There you go, hacking void any support from this forum.
-
List view threshold error in list view web part, column indexing not working
Hello all,
I have a list with about 8000 items and the list view threshold is set at 5000. I want to filter the list by a certain column ("Title", single line of text) so I indexed that column. I can filter the list (AllItems.aspx) however if I put the list
on a web part page (in the form of a list view web part), I can't filter by that column. Shouldn't the indexed column allow this?
Note that the threshold will not be increased and a daily time period to bypass the threshold is in place, but I'm looking for a solution for any time of they day.
Thanks!Thanks for your response. Your suggestion did work! It got me thinking and I took some time to investigate this column indexing stuff a little closer. I had an "ah-ha" moment.
Regardless of whether the column has an index or not, dynamic drop down filtering in a list view web part will only work if the list view has fewer items than the threshold. This is the critical point I was missing. I was assuming the index would allow for
drop down filtering.
Thanks again! -
Liquify and other filters not working...CS 3...
Hey Everyone!
I have two problems with my Photoshop CS3.
1] When I open an image > Filter > Use Liquify filter > Press OK -----Nothing happens, Image reverts back to its original state. Same thing happens with other filters.
Why is this happening?
I re-installed PS and even formatted my PC (Win7, i3) but still it continues. Used mode> RGB/8bit ----but non of any use.
2] Also, PS is creating *_MVM_.tmp files on othe HDD ie on D:/ and E:/
Can anyone please help me?
Regards!I’m a Mac user so I can offer only generic advice:
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by pressing command-alt-shift/ctrl-alt-shift while starting Photoshop until the appropriate dialog appears after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)
And a Forum search for »_MVM_.tmp« would point you to threads like this
http://forums.adobe.com/message/5285201#5285201 -
9i, Redhat 7.1 and INSO filters not working
Hi,
I have big troubles making Oracle Text work on my Linux RedHat 7.1.
I am using Oracle 9i Standard Edition at the moment.
Indexing works fine with 'create index' when I use it on a plain text
column. It also works with my blobs if I use the parameter 'filter
ctxsys.null_filter.
But when I want to use Oracle's INSO filters to translate documents
(RTFs at the moment) with this SQL command :
create index doc_index on DOCUMENTS(DOC)
indextype is ctxsys.context
parameters ('datastore ctxsys.default_datastore filter ctxsys.inso_filter')
or directly from the shell with :
/9.0.1/ctx/bin/ctxhx /home/oracle/test.rtf /home/oracle/test.txt
I get this error :
/9.0.1/ctx/bin/ctxhx: error while loading shared libraries:
/oracle/product/9.0.1/ctx/lib/libsc_ut.so: undefined symbol: stat
Is anyone aware of this problem ? How can I solve it ?
Listener is working fine for IPC, blobs upload is working, everything else
is working. Is Oracle Text worth the time spent to make it work...
I would really like some help please.
Thanks
Louis MarieHi Max,
I have tried but got the same error as ctxhx. I'm indoubt why
Redhat 7.1 is certified for O9i (I found it in Oracle's
Metalink)?
Rgds,
Raymond
or directly from the shell with :
/9.0.1/ctx/bin/ctxhx /home/oracle/test.rtf /home/oracle/test.txt
>>
I get this error :
/9.0.1/ctx/bin/ctxhx: error while loading shared libraries:
/oracle/product/9.0.1/ctx/lib/libsc_ut.so: undefined symbol: stat
Is anyone aware of this problem ? How can I solve it ?hi !
have the same problem with ctxhx. try /9.0.1/ctx/bin/ctxhxO
binary. does work for me.
regards
max -
Metadata Navigation and Library Column Filter Bug
To whom it may concern,
When document library metadata navigation is enabled and a user clicks an item in the metadata navigation part, the library updates to reflect the selected filter. Subsequent filtering actions performed on columns in the library do not filter the list
further. For visuals refer to the thread below.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ab5c7d15-14e7-470a-8120-71d049a104d3/list-metadata-navigation-and-columns-filters-not-working?forum=sharepointgeneral
My reason for re-posting this is 2 fold.
1. The answer to the thread above is not an answer, it is a work around.
2. Presenting the option for a user to continue filtering a view, but having that option do nothing is a bug. The option should be hidden, or it should perform the expect action.
Please either inform me of an expected timeframe for resolution, or point me to an exacting set of steps to take in order to escalate this issue to someone who will take action to fix it.
ThanksHi,
According to your description, my understanding is that column filtering cannot work after filtering on the managed navigation in SharePoint.
I tested the same scenario per your post in my environment, and I got the same results as you got.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
Filters not working in Column A
In Numbers 3.0 Filters have not worked in the first column regardless of it being a header column or not.
Works ok here.
This:
Results in this after checking the Filters box:
The ability to filter on more than one column at a time is good. Need that back for sort too.
SG -
[SOLVED] cat6500 vlan filtering not working
Hello!
I have cat 6500 with SUP32-GE-3B/MSFC2A/PFC3B, s3223-adventerprisek9-mz.122-33.SXJ6.bin,
and WS-X6148-GE-TX module.
And I have a couple of 3750G.
On all of 3750G there is a broadcast filtering of VLAN 4000, and it's working:
mac access-list extended badhosts
permit any host ffff.ffff.ffff
vlan access-map dropbad 10
action drop
match mac address badhosts
vlan access-map dropbad 20
action forward
vlan filter dropbad vlan-list 4000
Then i copy this config to 6500, and it's not working. I configured two ports, one is switchport access vlan 4000 and other is switchport capture allowed vlan 4000, and i see on both ports same broadcast traffic. Filter is working, but packets are not dropping. I've tried to find something in manual, but found only about platform cwan acl software-switched, enabled it, nothing changed.
cat6500# sh vlan filter
VLAN Map dropbad:
Configured on VLANs: 4000
Active on VLANs: 4000i think i solve the problem: to make vlan filtering to work on 6500, i've added:
# conf t
(config)# int vlan 4000
(config-if)# no shut
(config-if)# mac packet-classify
Now, how to mark this question answered? -
Question:-
I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time or other portal and it does not work in iChat. Why Not ?
Answer:-
For a Name to work in iChat it has to be an Valid AIM screen Name.
Only Apple IDs from the @mac.com ending names registered here and the Mobileme (@Me.com ending) names are Valid with the AIM service as well as being Apple IDs
(I am still working on info about registering with iCloud at the moment but if this does give you an @Me.com email it may well be a valid AIM name as well)
NOTES:-
The @mac.com page works by linking an external (Non Apple) email with a @mac.com name.
This External Email cannot be one linked to an Existing Apple ID (you have to use a second email or register at AIM )
The options at AIM are to use your existing email or create new name and link the existing only for Password recovery
MobileMe (@me.com ending names) were valid Emails addresses, Apple IDs AND a Valid AIM Screen Name
@mac.com names look like emails but are only Apple IDs and iChat/AIM Valid Screen Names.
The AIM registration page seems to be pushing you to register [email protected] This is relatively new and I have not followed through the pages to find out if it a valid AIM email (Previously you could register a name without an @whatever.com suffix)
8:16 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, SeriouslyQuestion:-
So I have my current [email protected] email in iChat as I thought as I had linked that to an Apple ID it was a Valid iChat Name. It keeps coming up with a UserName or Password Invalid message. What do I do next ?
Answer:-
Open iChat
Go to the Menu under the iChat name in the Menu Bar and then Preferences and then Accounts in the new window.
Commonly written as iChat > Preferences > Accounts as directions/actions to take.
If it displays with a Yellow running name in the list you have a choice.
Either register it at AIM (I would use a different password to the ISP Login) and then change the password only in iChat (It may take you to confirm any Confirmation email from AIM first) in iChat > Preferences > Accounts
Or you register a new Name at AIM (Or at @mac.com) and enter that (details below)
If you have a Blue Globe name (@mac.com) that will not Login the chances are that it the password that is the issue.
Apple lets you create longer passwords than can be used with the AIM Servers.
Change the Password at iForgot to no more than 16 characters.
Then change the password in iChat as details above.
Adding a new Account/Screen Name in iChat (that is valid with the AIM servers)
Open iChat if not launched.
Go to iChat Menu > Preferences > Accounts
Click the Add ( + ) Button at the bottom of the list.
Choose in the top item drop down either @Mac.com or AIM depending on what you registered
Add the name (with @mac.com the software will add the @mac.com bit)
Add in the password. (If you don't add it now iChat will ask you each time you open it)
Click Done.
The Buddy List should open (New Window)
The Accounts part of the Preferences should now have the new name and you should be looking at the details.
You can add something in the Description line which will then title the Buddy List (Useful when you have two or more names) and make it show up as that in the iChat Menu > Accounts and the Window Menu of iChat when logged in.
You can then highlight any other Account/Screen Name you don't want to use and use the Minus ( - ) Button to delete it.
8:39 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Formula Columns are not working in Reports 10g
Hi,
We converted the reports developed in Reports 6i to Reports 10g. When we run the report in Reports 10g Builder everything works fine. But when we deploy the same report in Oracle Application Server and invoking the report the formula columns are not working ie., the fields/ placeholder columns which are based on the formula column are not displaying any values in the report.
Please, someone help us in this regard.
Thanks & Rgds,
M TWhat version of Reports do you use..???
Greetings... -
Java will not work on the computer all of a sudden. Now when I go to open a Pogo game room up i get a Mozilla red lego piece in the corner saying "Some plug ins have been De-activated for your safety, in the box will be "Java (TM) platform SE 6 U". I have removed Java7 and reloaded it, after that not working found Java6 and loaded and reloaded it and it is not working.
Now after 3 minutes of the room not loading Pogo will give me the error message of
Java Not Found or Not Working
Explanation:
This error means Java (one of the technologies built into most browsers) is not working correctly on your browser.
You must have Java installed on your computer in order to run Pogo games, and it must be functioning properly. Either you don't have Java installed yet, or the Web browser you're currently using doesn't support Java or you have Java (or Javascript) disabled in your browser.
How to Fix the Problem:
Java is a free download that is required to play Pogo games. Not all computers come with Java pre-installed.
If you haven't played Pogo games before and are getting this error, you probably just need to install Java on your computer.
For instructions on installing Java for your operating system and browser click here.
If you believe Java might be installed but disabled for your browser, please be sure to enable the plugin for your browser. If you need help, click here.
If you already have Java installed and it is not disabled, your Java may be out-of-date or no longer working. In that case, your Java might need to be upgraded or reinstalled. If you need help, click here.
I have done the click here in last sentence and all it wants me to do is download Java7 which was the first reason it was not working.
Hopefully I have explained this well enough, from Mozilla this is what I get BUT if I go to Internet Explorer (which I HATE) the Java6 and Java7 work perfectly fine. So apparently the Java is downloaded correctly I just can not get it to play nicely with Mozilla and that is my main goal.
EA games help page has gone through it all with me and have proven over and over (after 1 hour sessions, 45 waits for them) Java is working on my computer perfectly with IE just not on Firefox and with the rural situation I have become dependent on Mozilla because of the no fiber optics here it has been my best and only source of successfully using the internet here in the far out part of the country.Thank you so much, for once in my computer life I knew what the problem was, what caused it, why it was caused, what it did, what it made it do and most importantly how to fix it and to do it correctly and expeditiously. I can not Thank You all enough for all of the help! I also have Pogo mailed this to all on my friends list, where they have all learned as I have and have fixed theirs also. and the message is being spread. Thank You again, I just can not say it enough.
-
Self Registration and Attestation is not working in OIM 9.1.0.4
Hi,
i have setup a new OIM environment using OC4J. I am able to create users and provision IT resource but self registration and attestation is not working. not sure it is OC4J issue or OIM issue. For self registration it says request is submitted but when I login as xelsysadm and dlon't see any pending request and same thing happens for attestation. It dowsn't display any error but never gets completed and don't see this also in pending request list. If anybody has idea to debug the issue then let me know and thanks for help.
Thanks,
HCAs per given bug it is looking for jars which is missing
have you install connector using deployment manager?? if yes it copy required jars at target location. verify if not there copy jars in Scheduled Task folder.
Check the document if any external jars required and same put at ThirdParty folder -
Spotlight and Find does not work in 10.4.7 and Macbook Pro
I have this strange problem of the Find and the Spotlight not working properly. Whenever I pass on a word to search it doesnot give me the full list. e.g In desktop I have file UserValidator.java and in the Find window I give options: Name Contains "Validator". The list that it is showing is not having the .java file.
I am getting crazy what is happening. Has anybody faced with this problem.
Thanks,
TanmoyPerhaps it's an Invisible item?
In Find, select Other
It opens a 'search attribute' window, in that scroll to and select 'Visibility' (4th from bottom)
Check 'Add to Favorites' then OK
Then select 'Visibility' and on the right button 'Visible or Invisible'
Search for your file -
I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4? Mac OS X 10.6.8. 17" MacBook Pro
Use your Software Update under the Apple menu, it SHOULD bring Safari up to 5.1.9 on OS X 10.6.8.
Apple IS issuing security and other updates for Snow Leopard users.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
Safari 6+ is only for 10.7+ users as OS X is morphing into iOS.
10.7 and 10.8 will not run your PPC based apps of 10.5/10.6
If Software Update is not working, then you have other issues, backup your users folders off the machine to a external storage drive (not TimeMachine!) and run through this list of fixes.
Most commonly used backup methods
..Step by Step to fix your Mac
Maybe you are looking for
-
OATS - Browser is not getting launched when I click on the record button.
Hi, I've just installed Oracle Application Testing Suite in my machine. During the installation process I was intimated that the EmpAppServer in the installation path does not contain the jboss binaries. However, it allowed me to continue with the in
-
How to view video files from a t4i ? Would like to use TV
I may be interested in spending a lot of $ to buy a t4i but would like to play movies / video on TV. One choice is Xbox via a thumb drive but Xbox will only recognize .mp4 files and this camera uses .mov. Second method is via USB input to my new LG
-
Problem while calling stateless session bean method with large data
In websphere, i am trying to call a stateless session bean's remote interface method with 336kb data as its parameter. It is taking almost 44 seconds to start executing the method in the bean. Can anyone tell me what could be the problem? Is there an
-
my ipod is not working so poeple said that i have to restore my ipod and when i did my itunes said that there is an error !!
-
How to run projects on Wireless Toolkit on Solaris 10?
Hi, I've installed Solaris 10 on x86. After that I've installed Wireless toolkit and Netbeans Mobility pack. I was able to install both of them but, Now, when I try to run any J2ME application I get an error "Cannot find /lib/ld-linux.so.2" and somet