List multiple firewire cards

I am developing a 10 camera system using multiple IEEE 1394 (firewire) cards ... How do i list the firewire cards connected and which camera is connected to which card ...? PLs reply..

duplicate post.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Similar Messages

Firewire card with multiple controllers

Quick question....
I am looking for a firewire card for connecting 2 cameras. Will I be able to use a standard PCI-E card or will I need to look for one with one controller per port.... Most share a single controller voer multiple ports. I've had problems int eh past with multiple ports on one card, but this may have been a PCI card with limited system bandwidth.....
Ideas anyone?
The cameras will be most likely 1280x1024 RGB cameras with 60FPS.
Cheers for any help forthcoming.
Shane
Say hello to my little friend.
RFC 2323 FHE-Compliant

Nobody, no?
The cameras are actually monochrome, 8-bit not RGB (24-bit) and only go up to 30Hz.....
I mean theoretically a FW400 card should handle a 1024pixel x 1280pixel x 8bit x 30Hz (314 Mbit/s without overhead) picture no problem but adding a second camera will more than saturate the bus.....
Anyone know of a decent PCI-E FW card which has two ports with a seperate controller for each? Please?
Shane
Say hello to my little friend.
RFC 2323 FHE-Compliant

Multiple Firewire Connections on a MAC PRO 2008

Wondering if anyone knows if there are any issues with multiple firewire inputs on a MAC PRO? I will be downloading film footage as well as running a Presonus Inspire for Voice-Overs which also uses a firewire connection to the computer.

The MacPro comes with 1 FW400 + 1 FW800 ports in the back and 1 FW400 + 1 FW800 ports in the front. They ALL share the same bus.
You may, or may not, have problems. Some devices play well with others and some don't. For example, AJA STRONGLY recommends you put the io devices on their own bus, canon cameras often will only work when they are on their own bus, and so on.
I've no idea whether your firewire audio device will conflict with your video tape playback device. If it was me, I could pursue this a couple of ways. 1, contact the audio people and get their recommendation or 2, give it a try and see if it works. If it doesn't, I'd purchase a PCIe firewire card and connect the bus hog to it.
Good luck,
x

Can anyone help with a troublesome FireWire card reader

I have an Addonics firewire card reader to transfer image files to my Macs. It has never been predictable about mounting on the desktop when I insert a card. I've used it with OS 10.2, 10.3 and now 10.4.8. I have the OS set to open Photo Mechanic when I insert a card, but most times, nothing happens. After trying various daisy-chain connections, I have the reader connected directly to the computer, but this hasn't helped.
Usually, I have to disconnect the cable, then re-connect; I usually do this at the reader end, to save wear and tear on the computer port. Sometimes multiple attempts are necessary, but in the end, this procedure gets results better than anything else. I have tried a different cable, known to be good, with no improvement.
I have a little utility called Spindown HD, which shows what's attached, and in fact, the reader shows up as connected, but sleeping. So, perhaps this is a "wake-from-sleep" problem instead.
By the way, Addonics "support" was useless. Their site states that they offer no support on products over two years old. An email inquiry brought the response that they could do nothing to help. On service quality grounds alone, I have bought my last Addonics product.
Do others have problems with getting FW readers to respond? This is driving me crazy, and wearing out ports or connectors.

bad card reader, un-supported by Addonics (mfg)

Does Lightroom 5 (CC) support tethering for a Nikon D1x with a Firewire Card on Windows 7?

Our company wants to use an older, but fully functional, Nikon D1x and tether it to a Windows 7 Workstation with Adobe CC and a FireWire card installed. Will Lightroom 5 recognize the camera and allow us to manage workflow in a tethered setup, complete with photo taking and instant importing?
Thank you,
Jim

Hi Hal,
Thanks for your response!
I noticed that this list only shows versions of Lightroom 3 and above. Would a D1x have found compatibility with an older version of Lightroom? If so, might this compatibility be carried forward?
In either case, what third-party applications might you suggest?
Thanks a lot,
Jim

2 DV Cameras on same firewire card.

The computer I was using for our broadcast did not have any Firewire ports, so I added a 3 port Firewire card. When I have 2 DV cameras hooked up to it VC3 will only recognize one and the other will be black.
Would it be better practice to use separate Firewire cards for each camera? Does anyone else have any problems running multiple DV Camcorders through Firewire?

Thanks for the reply. Just a follow up, I added a second Firewire card and all is well. No problems using to DV Camcorders now.

Best Firewire card for PC?

Hi Folks. What would all of you suggest as the best PCI Firewire card out there for a PC? Mine only has one port working and I need at the very least 2. So, I will be ordering one pretty soon.
Any suggestions are appreciated.
Thanks,
VG

To add a resource to this thread: http://www.firewiredirect.com/store/home.php
I've bought many cards from this source (all sorts of configurations), and they have been a pleasure to deal with. Their prices seem fair, but I usually shop for product specs. and good service, before price.
They offer some configurations, that I do not see from most card mfgrs. and several of these have fit my particular needs perfectly. Ease of ordering in nice, shipping always quick, but I've never had any problems, so I do not know about returns - would guess that they are good, but just have never had to return anything.
I also recommend the FW-800 connections, as does Chuck. If one's BIOS can work with IEEE-1394b, and so can one's peripherals, it is a really fast connection.
One comment on multiple devices on one FW connection: I have had great luck piggybacking (both FW-800 & 400) for HDDs. Though I have never experienced a problem, I do not do this for any camera, A->D converter, or even external DVD burners. OK, I did piggyback an external burner, with no problems once, or twice, but do not do this on a regular basis.
Luckily my workstation has 4 separate FW busses on the MoBo and I use one of the FW-800 cards (from above source) for those 1394b connections. Never a complaint on any from a wide array of peripherals.
Hunt

Adding a firewire card in warranty

I want to add a firewire card to a pci slot. But if I do does it void my warranty?

Thank you for your reply. Could I ask you a question. The specs list a pci slot along with a pci express x 16 and pci express x 1. I know the slot I want will be next to the blanking plate, but how do I know which to slot it into and could you desribe how to tell the difference and which one to use. many thanks in advance.

Firewire card installation failed, now won't boot into os x

G4 gigabit dual 450 was working fine except firewire port wasn't so I installed a firewire port card. On reboot i got/get a nice startup tone but the screen stops on the grey on grey apple image... with the grey bar circle spinning, and won't move into os x. I tried the button switch (PMU? counted to 12) by the internal battery, but no change. HELP, please...
(I took the firewire card out)

Hi
Dale Wiesshaar,
I installed YellowDog Linux last week. I deleted the installation, personal reasons, and tried to install this week.
Guess what happened? All three firewire ports are not working.
When trying to install YDL, the installation tries to load the ohci1394 driver and abends, dumps, throws and exception, whatever.
In addition, none of the 4 daisy chained firewire drives appear on the desktop. None of the additional 3 daisy chained firewire drives appear on the desktop. The firewire camera does not appear on the desktop.
So I broke the chain into a 15 feet chains, and distributed the chains over 2 external firewire ports. Four devices are on one chain, and two devices are on the other chain. The other firewire device was moved to the 12 port usb hub (this device switches b/w usb/firewire). The camera is off the chain entirely.
The following are the installed extensions on my mac:
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
IOFireWireSerialBusProtocolTransport.kext
This is the fix I performed: http://www.index-site.com/firewirebug2.html#RESETPMU
pull the plug on all devices and power mac; waited an entire day to replug
reset-all = in open firmware
reset parameter ram
broke up the chain of firewire devices to 15 feet each, on each port
blew any dust particles from the firewire ports
lastly, reset PMU
the battery is problably less than 2 years old (my mac is 10 to 12 years old; it is my personal computer)
None of the above fixes restored my firewire ports. Therefore, I purchased a firewire card. All firewire devices appear within the finder.app.
I am not able to install YDL. YDL allows me to perform a multiple boot:
Linux
MacOSX
MacOS
OpenFirmWare
CD
NetWork
(for security reasons i do not perform all of these boots)
When YDL attempts to load the ohci1394 driver, it fails. I removed the new firewire card, now I am back to circle one.
I will now try the following solutions:
combo update
repair permissions
If this does not work, I will reseat my fireWire card and not install YDL.
Thank you in advance for your assistance, and helpful post on the fireWire conumdrum.

A music album is listed multiple times in my library but each listing only has a few songs in it-not the full listing. How can I combine them into one album and get rid of other duplicate listings?

Several music albums listed in my IPhone 5 music library are listed multiple times, but each one only has a portion of the songs listed. How can I combine them to make one album?

First....Thank you so much for your prompt reply. I am sorry for not getting back to you regarding your suggestion-I had computer issues that just got resolved. Also, this is my first foray into online chat rooms so I have a lot to learn to precisely state my issue! I did as you suggested and all the songs list the same album when I go into each song's "get info". However, I am not sure how to edit as you suggested. When I downloaded this album originally, for some reason it broke up into several albums each with different songs from the original album. I am trying to consolidate them back into one album in my library. I would greatly appreciate further assistance if you can. Also, I do not use "the cloud" to store any data and would like a good source of info on how to do this. Thanks so much for your patience!
SueZoo

To capture the Mini-DV file through the 1394 firewire card from t

hii there!
first let mi make you understand what we people are doing ....
We people want to capture the Mini-DV file directly through the 1394 firewire card from the sony camcorder in to the MPEG2
format. Thent on the fly(i.e.during capturing into MPEG2) we also want to capture the metadata i.e (time,date etc. of the
original shooting event) into some text file. Our MPEG2 format requirements are: 8mbps viedeo,freq-48KHz,16 bit sterio,384
audio kbps, Deinterlace... we are using JavaMediaFramework-2.1.1e(Java Media Studio tool)..so we want to explore that tool
much more coz rightnow it's not supporting MPEG2(only supporting MPEG1) and also not supporting 1394 cpture card ...we want
the codec for converting DV-AVI to MPEG2 with date and time exctrated and much more explored details about JMf2.1.1 JavaMedia
Studio to get more familiar.....
for the above mentioned problem I am trying to add the mpeg2 codec inthe plugin of the jmf studio..and i have followed the
steps ..
Download the Codec from IBM
Extracted jmf.jar
Extracted codec.zip
Added files from codec folder to jmf folder
Made a jar out of it and name it jmf.jar
Replaced that with current jmf.jar (kept a backup)
Opened JMFRegistry and in "Plugins","Codec" and now unable to add " "
this becoz i am not knowing the exact way of recopiling that newly created jar file and because of that that mpeg-2 codedc is
not get added .....so i am looking forward for any help for the above mentioned problem!
I would be gratefull on getting ur help coz it's such challenging and techy concept to explore...
thanks..
nilesh hardikar
contact: [email protected]

I understand your pain. See BUG ID 4640032: JMF does not support DSVD encoding
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4640032
Add your vote, maye Sun will hear!

PCMCIA firewire card for G4 laptop (follow-up to excessive timecode breaks)

1.) It was recommended that I get a new firewire bus to resolve excessive timecode breaks when importing from a Canon camcorder to an external hard drive. I've been reading through posts on this topic...and saw getting a new firewire port mentioned a few times... How come when I called Apple to check on the cost of a new firewire card for my laptop Powerbook G4, I was told that nothing could be added without replacing the entire logic board? Am I missing something? I didn't say "PCMCIA firewire drive" - is that something special? Any idea of the cost to purchase and install?
2.) Apple recommended just capturing to my internal hard drive, and transfering the projects. Apart from this being cumbersome... I need a little verification: if I transfer PROJECT X to my external hard drive, then do I also need to transfer my Audio Render, Autosave,Capture Scratch, Render, Thumbnail, and Waveform folders? [I realize this is basic, but I'm wary of losing the information the project needs and getting it all messed up]
Powerbook G4, Mac OS X (10.3.9) FCP 4.5, LaCie external HD
Powerbook G4, Mac OS X (10.3.9) FCP 4.5, LaCie external HD

http://www.bhphotovideo.com/bnh/controller/home?A=details&kw=BEAFWT2&is=REG&Q=&O =productlist&sku=304014
pcmcia is an card slot. If you have a 12" PB you may not have one.
If you have a pcmcia slot, buy the card. Slide the card into your computer and start up. Put the camcorder on the card and your fw drive on the port built-in to your computer. Even if this does not solve the timecode issues, it will save you other headaches in the future.
Question. Does capturing to your internal drive solve the timecode issues you are having?
I disagree with the advice of capturing to your internal drive and transfering the project after the fact. There are a bunch of reasons why, and all of them are qualified, so I hesitate to go further until I know whether or not capturing to the internal drive is making your timecode headaches go away.
I suspect capturing to the internal drive will not help the timecode issues which will make the whole point moot. But hopefully I'm wrong :>
Tom
ps
When you talk to representatives from Apple, you have to be conscious that if they are not specialists in the area you are focused on their advice may be based on general recommendations from an IT or home user perspective. There is a difference between talking to a sales person on the floor of the Apple Store and someone from the Genius Bar. And the person at the Genius Bar may have a tremendous background in network installations, but never have opened FCP. Or you might get lucky and get a FCP savvy genius, who would be a bit weak when talking about some other area.
This is not a knock, just a reality. It is difficult to be deeply conversant with even one area. It is not realistic for the generalists you usually deal with to know the best answers to very specific questions.
I'm working toward becoming a certified trainer with FCP and it is not easy or cheap to become an expert at this one application, never mind all the possible applications and hardware combinations for wildly different needs and budgets.

I have ripped all of my Cds into iTune, now I cannot find where some of the artists have been filled, not all the artists are listed, yet others are listed multiple times as they play with other groups. How do I list all one artist under his name? I know

Sorry this will appear pretty basic stuff. I have ripped all my Cds into iTunes, but in starting to make playlists it is apparent that some artists are listed multiple times as they appear with different bands, and others do not appear at all. I have tried searching different categories, compilations etc, and Finder box does not bring them up.
My questions are:-
Do I need additional software to manipulate my tunes in iTunes?
If so what is suggested?
or if not:-
How can I re arrange the tunes so that they appear only under one artist?
How do I make my "lost" artists tunes appear?
Thanks for any advice.

I am not really following what the problem is here. Artists are listed in the Artist field. I guess you could stick individual artists in a band in a field such as comments, but then you would have to include searching the comments field in your search. In which fields are these names located?
How are you making these playlists? Are these smart playlists or are you just dragging tracks to a playlist?
Are you doing this search with Finder's find or with iTunes' search?
If I knew exactly what it was you were trying to do I could tell you if you need addditional software. In reality though there isn't "additional software" for iTunes. There's Applescript plugins but I don't see how the ones with which I am familiar would have anything to do with searching for artist names.
How can I re arrange the tunes so that they appear only under one artist?
Steve MacGuire aka turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message.jspa?messageID=9910895)
Quick answer: Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields.

Can I use multiple credit cards with family sharing

My kids are adults. Can I use multiple credit cards in family sharing so they can pay for their own purchases?

Hello Cwb1234,
Thank you for using Apple Support Communities.
From what I understand, you want to set it up that your kids use their own credit cards for purchases within Family Sharing. Take a look at the article linked below, it outlines purchases and payments for Family Sharing and may offer a solution to the issue that you’re running into.
Family purchases and payments - Apple Support
Making purchases
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card. As the family organizer, any receipts generated by the transaction will be sent to you. Learn more about how iTunes Store purchases are billed.
Once paid for, a purchased item is added to the account of the family member who initiated the purchase. In other words, the content belongs to them, much as it would if you were buying them a book or a DVD. If Family Sharing is ever disabled, each member will keep the purchases they initiated, even though they were paid for by the family organizer.
These are the only current options for payment within Family Sharing.
Regards,
Jeff D.

Multiple Video Cards - 4 monitors

I was wondering if there was anyone out there that has a successful installation of multiple video cards. i.e. 1 AGP with dual ports and a PCI with dual ports. I would like to run 4 22" monitors on a G4. Just want to know if there were any reccomendations on card brands/types and configurations
Have multiple Mac's from G4 733 Giga to G4 Dual drive... Lil help

I'd reccomend using all ATI cards as they are/were better supported as far as multiple cards and features are concerned. A decent set up would be an ATI radeon 9800pro AGP with an ATI radeon 9200 PCI. Both are dual head and for PCI the 9200 is pretty good.

List multiple firewire cards

Similar Messages

Maybe you are looking for