List numbering without the "dot" after the number

Hi everyone.
I'm new on Pages. I'm testing it to decide if I change MS word by it (I'm using a trial version of Pages for 30 days, if I like it, I'll buy it).
However, I tried to do a very simple thing and I simply couldn't.
I want to create an automatic number list without the dot after the number. Isn't it possible? I simply didn't find where to configure it. The only possibilities are the ones that appear in the list? Can't I configure it the way I want it? Moreover, in the second level, I also want to put it without the dot after the second number.
This is what I want to do (for example):
1 Introduction
1.1 Objectives
1.2 Structure of the document
2 Development
2.1 bla
2.2 bla
2.2.1 bla bla
2.2.2 bla bla bla
2.3 bla
3 Conclusions
This is what I could do:
1. Introduction
1.1. Objectives
1.2. Structure of the document
2. Development
2.1. bla
2.2. bla
2.2.1. bla bla
2.2.2. bla bla bla
2.3. bla
3. Conclusions
I don't want these dots after the last number.
I already saw somebody answering a similar question to the user to not use automatic list. But my document has a lot of sections and subsections (it shall have around 150 pages). If I do the numbers manually and I need to insert a new section between sections 2 and 3 (for example). I'd have to change all the numbers after that with a lot of subsections. It'd be very hard.
Thanks very much in advance for any help.
I'm sorry about my bed English.

With Pages '09, the only soluce is to apply the workaround described by Apple in this Technote (for a different requirement but the problem is in fact of the same nature).
http://support.apple.com/kb/TS2127
Don't worry about your English and be happy, the technote is available in your main language
(* If I understand well, the mods solved your problem *)
Yvan KOENIG (VALLAURIS, France) vendredi 30 avril 2010 22:41:52

Similar Messages

  • When I quit itunes it restarts again with the dot under the itunes logo but the iTunes window doesn't open until I click the icon on the dock.  Also in the middle of the size vale in the size column the value starts with a number then a ? then a number.

    When I quit itunes it restarts again with the dot under the itunes logo but the iTunes window doesn't open until I click the icon on the dock.  Also in the middle of the size vale in the size column the value starts with a number then a ? then a number.

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forums.
    Regards.

  • Imessage only displays the phone number instead of the name after the last update. any idea how to fix it?

    imessage only displays the phone number instead of the name after the last update. any idea how to fix it? All messages had the names displaying correctly before the last update.

    From the menu bar, select
     ▹ System Preferences... ▹ Language & Region
    From the Region menu in the window, select one of the preset regions. If one is already selected, choose a different one, then change it back. Close the preference pane and test.

  • Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

    Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

    Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there.  For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color.  For a basic object, there should be a fill and/or stroke.
    What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted.  Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something.  You can drag those unwanted thingies from the Appearance palette into its own little trash can.

  • How to cut the zeros after the decimal point ?

    Hello everybody,
    does anyone know a solution how to cut the zeros after the decimal point at at CHAR data field?
    For example the field
    &RM06P-PRMG1&
    This is a char field in the database, so that the command
    &RM06P-PRMG1(.0C)&
    doesn't work.
    At the moment the output on the form is like that
    124,000
    It shoud be like that
    124
    It would be great if anyone could help me!
    TIA!
    Strobbel

    Hi Strobbel,
    If you are working on standard sapscript, first make a zcopy of it, do the modifications in that and assign the new form to the output types in tcode NACE.
    First you need to create a program to write the logic, so go to tcode SE38 , create a new program (say zremove_zero) with Program type Executable.
    Now you will see ABAP Editor with statement;
    Report zremove_zero.
    Add the following lines below the report statement.
    *&      Form  remove_zero
    *       text
    *      <--lv_AMT  text
    FORM remove_zero  CHANGING lv_amt.
      DATA p_amt TYPE p.
      MOVE lv_amt TO p_amt.
      MOVE p_amt TO lv_amt.
    Condense lv_amt.
    ENDFORM.
    Now save and activate the program.
    Now open the zcopy of your script and Just above the statement  &RM06P-PRMG1& write the following lines;
    /: perform remove_zero in program zremove_zero
    /: changing &RM06P-PRMG1&
    /: endperform.
    Now you can see your amount printing without decimals.
    Try and let me know, hope i have guided you clearly.
    Regards
    Karthik D
    P.S.: I advice you to take help from an ABAPER.

  • Is there anyway I can find the key after the program has been installed?

    Is there anyway I can find the key after the program has been installed?

    One the product has been installed you cannot locate the Serial Number on the installed copy. Though we recommend you register your product on Adobe.com, by Going to Help-- Registration.
    Thanks!

  • Restrict the creation of documents in the cfolders after the Bid End Date

    Hi All,
    The System allows the bidders to create documents in cfolders even after the Bid Submission deadline has reached, whereas the Quotation would not be submitted as the Bid Submission date is in the past. Is there any way to restrict the creation of documents in the cfolders after the Bid Submission End Date?
    Waiting for your reply,
    Mary

    Hi Mary,
    In the competitive scenario in the first screen itself there are fields for "Due date" and "Due time". Once these entries are maintained, that particular collaboration will get freezed then and no documents or bids can be submitted post that time.
    I hope this will solve your query.
    Regards,
    Nishit Jani
    Award points only if you find the information useful.

  • I have highlighted words in an .iba file. Now I need to increase the space before (and/or after) the paragraph it's contained in. If I increase the space after, the height of the highlighting increases also. Is there any way around this?

    I have highlighted words in an .iba file. Now I need to increase the space before (and/or after) the paragraph it's contained in. If I increase the space after, the height of the highlighting increases also. Is there any way around this?

    http://www.apple.com/feedback/kaywerty wrote:
    A rather long winded way of asking if anybody knows if it's possible to have multi-windows open
    It's not possible.
    Suggestions here -> Apple Product feedback

  • Is it possible to change the name of the characteristic after the PA is act

    Is it possible to change the name of the characteristic after the PA is activated?
    If yes what should I do?

    Hi,
    yes its possible and it works in the same way as the creation of a new characteristic / assigment to an up- and running operating concern.
    Thats because the "name" of a characteristic is not stored in a text table but it is the field label of the data element.
    Search in the SDN forum if you are unsure how to do that.
    Best regards, Christian

  • How to elininate the Zeros after the decimal

    Hi,
    I columns in the scheduler table has BEGIN_DAY BEGIN_MONTH BEGIN_YEAR and the values are coming like 12.00, 11.00, 2009.00.
    In the database there is no zeros after the decimal but when the tables are imported to OBIEE the see the zeros in the above columns. Is there any way to eliminate the zeros after the decimal points in the RPD.
    Rgds,
    Amit

    It should not display zeroes if you set the column type to INT in Physical.. probably you might have forgotten to refresh the Server Metadata...
    Other way you can give a try is - In Answers, go to Column Properties => Data Format and check 'Override Default Data Format' then choose 'Decimal Places' to '0'..
    Note: this eliminates 0s only in this report..

  • How can we monitor the audio after the cleanup process before we actually record the trans

    I have the Sound Blaster Audigy 2 ZS board and I am using it to transfer vinyl records to make CDs. Before my upgrading of Creative Media Source 2 to Creative Media Source 5, I was able to monitor the audio after the cleanup prior to the transfering process. Now I can only monitor the sound at the line input point and not after the cleanup process. Is there any way that we can do that?Vinylrecord

    Assuming you mean Actions when you say "Batches", use this menu...
    1.  Click on the name of the actions set you wish to save.
    2.  Click the fly-out menu icon at the upper-right corner.
    3.  Save Actions, put them someplace on your hard drive other than in the Photoshop installation area.
    -Noel

  • If we missed the live performances from SXSW, will we still be able to watch the performances after the artists have performed?

    If we missed the live performances from SXSW, will we still be able to watch the performances after the artists have performed?

    Yes, the app has a feature to playback the concert. I missed London Grammar and Imagine Dragons, but watched Coldplay. They were really excellent. Do love Apple for bringing this to us.

  • Apple tv3 runs slowly on all apps in the box,after the last update.Picture sometimes runs slowly on netflix ,and all the apps in the apple tv3 box.But the sound is ok.Anyone else have this problem?

    Apple tv3 runs slowly on all apps in the box,after the last update.Picture sometimes run's slowly on netflix ,and all the apps in the apple tv3 box.But the sound is ok.Anyone else have this problem?I have a 20Mbit wireless line,but i had put a cable from my router to my apple box,but it did not help.

    Are you using a home network?
    Try the following :                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings

  • Why my home wifi connection ipad2 enter the password after the password has been wrong? Password is the phone able to connect after the connection is ipa

    Why my home wifi connection ipad2 enter the password after the password has been wrong? Password is the phone able to connect after the connection is ipad2 has been an error?

    Hello joe2616,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your Wi-Fi network is dropping, please follow the directions outlined below.
    Symptom: The network connection drops unexpectedly
    Your Mac may not not stay connected to your Wi-Fi network reliably.
    Your Mac may stop accessing the Internet during use.
    Solution
    Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
    Check your range to the Wi-Fi router and reduce the effect of interference.
    If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
    Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • ODI Client cannot connect the datebase after the datebase IP changed

    ODI Client cannot connect the datebase after the datebase IP changed.
    1,the datebase on mac A,the mac changed ip
    2,on the client, tnsping db is ok.
    3,use pl/sql ,can connect on the db
    4,with odi,changed the repostry URL to the new db IP,throw the exception below
    java.sql.SQLException: Io Exception: The Network Adapter could not establish the connection
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:274)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
         at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
         at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
         at com.sunopsis.sql.h.run(h.java)
    Is anything we need to config after change db machine IP?

    yeah,I got it.Everything is ok now.
    After change IP,we must open TopologyManager:change the JDBC connection of workrepository which must chose in Designer.
    when we open the Designer ,it will connect to db.then coonect to workrepository with original IP.So,we must rechange workrepository's JDBC first!

Maybe you are looking for

  • Document update with DocumentDefinition not working

    Hi I would like to be able to update a PublicObject with new attributes and also reset the class name to which the object belongs. I have written a small test program (see below) which compiles fine and, according to the APIs should work updating a P

  • Manually entering exchange rate in MIRO despite having it fixed in the PO

    Hello, My PO's are entered with fixed exchange rate (KUFIX = 'X'), that is used both in MIGO and MIRO. Is it possible to use the fixed rate only in MIGO, and enter a different exchange rate manually in MIRO ? Thanks in advance, Joã

  • Multimedia Messaging anytime soon?

    I don't currently have an iPhone but am going to be getting one soon, however I would really like being able to send (not using some e-mail workaround) and receive (without having to go through that whole viewmymessages.com thing and actually get it

  • No evidence of downloaded ebook

    Hi, sorry if this doesn't make sense I've never tried to download an ebook before. I purchased an ebook from LULU. I installed Adobe Digital Editions. There is no evidence of the book anywhere on the computer, so I purchased another copy. Still nothi

  • Release strategy of PO

    Hi, Do we need to maintain charactertic value in CTO4  under values tab...or its to be maintained when we add something new like new plant, new doc type etc? We give values only when we define release strategies....correct me if i am wrong. In case w