List of 64-bit screen savers?

Does anybody know where I could find a list of 64-bit screen savers for Snow Leopard?

I don't know of any lists but a couple are listed here
http://discussions.apple.com/thread.jspa?messageID=10081411&#10081411

Similar Messages

64-bit screen savers won't run if 32-bit versions were previously installed

I've run into this a few times now. If I try to install, say, the 64-bit version of the screen saver "Euphoria" (version 10.2 - http://s.sudre.free.fr/Software.html), I get the same message as if I were trying to run the older 32-bit verion (You cannot use the Euphoria screen saver ... etc).
Yet if I try to download and run a 64-bit version of a screen saver I previously did not have (e.g., "Flux," "Fireflies" from the same site), then it runs fine. On one screen saver ("Anemona" - http://uri.cat/software/Anemona/) I ran into the problem, but I managed to get it to work by altering its name before installing it, but for "Euphoria" and others this did not work. I've tried deleting the old version first, but that didn't work.
Has anyone else run into this? Does 10.6 keep track of these files on a "rejection" list so that installing newer versions can still prompt rejection?
Any suggestions? Thanks.

Probably you were seeing a conflict between a version of the screen saver in "/Library/Screen Savers" and the new on in your personal "~/Library/Screen Savers"
Best to delete a screensaver (right click context menu in screen saver preferences) before reinstalling it.

Deleting Screen Savers from list

When perusing my "Desktop & Screen Saver" preferences, I played with the option "Choose Folder" (at the bottom of the list of canned screen savers) and selected my Desktop folder just to see how it would work.
Now I can't eliminate that selection from the list of options. I have been to the screen saver folders under the user, the hard drive, and system folders. Can't find where my desktop folder qua screen saver is found so I can eliminate it and get it off the preference list.
I hope the answer is not to reinstall Tiger!
Many thanks to anyone who can help.
--Forrest

1277/3723
Hello Forrest,
No need to reinstall Tiger!!
All you have to do is to "Choose Folder" again, select another one. It will replace the previously selected folder.
Axl

Background and Screen Savers

How do i change the Background of the desktop and the Sreensaver?
sorry if this is in the wrong section, i wasn't sure of where to put this tread.
and aslo, the bit where you press menu on your remote and the new srceen comes up where you can view pictures and listen to you music. My songs come up on there but my pictures don't what folder do they need to be in?
Please could you help
Jack
macbook Mac OS X (10.4.6) Upgraded White Version

You change the background and screen savers in the System Preferences Desktop & Screen Saver preference panes. Just click System Preferences in your dock.
In order to view your pictures in Front Row, you need to import them all to iPhoto.

Computer Name and Flurry only available Screen Savers

I've lost all the built in Apple Screen Savers except for Computer Name and Flurry. Has anyone else had this problem? How do I fix it? I looked in Computer > System > Library > Screen Savers and saw all of them there, but when I open up my System Prefs, they aren't listed. I tried repairing permissions but that didn't work. Any ideas?
Also, I have an iSight camera, and PhotoBooth is telling me my card isn't compatible, even though I used it one time when I first installed Leopard. Any clues on that one? I'm thinking this has something to do with one of the recent updates.

OK, so after not getting anywhere (not to mention growing tired of too much desktop) I disconnected my secondary monitor that was hooked via a VGA to DVI connector to my ATI X1900 XT card, and now all the screen savers are back. Looks like it just didn't like having the connector.

Energy and Screen Savers Don't Seem to be Working

I have a 27" iMac (early 2011) running Lion. No matter how long I set the Energy or Screen Savers for, the screen dims after less than five minutes of inactivity then goes into screen-saver mode after another couple minutes.
Any suggestions?
Thanks,
Lloyd

Hi Lloyd,
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
If that doesn't do it, (not on 10.7 to see if it's the same, but older OSX info)...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these files to the Desktop.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
(Then Trash the original of these last two, as "moving" them only copies them.)
Then reboot once more.

Facebook albums in Screen savers

How to remove facebook albums from list of screen savers albums in Preferences...???

That's a feature, not a bug. Really.
It's been like that since 10.5 Leopard, if I recall. I use this feature all the time.
It's the same with the desktop.

Quartz Extreme and Screen Savers not working

I couldn't find an answer to my problem. But I found an answer close to mine said (10.4.4 broke Quartz Extreme). There system profiler says Quartz not supported. I checked mine says the same thing now. The answer was to delete two files from system library (Extension.kextcache and Extension.mkext) I did that and restarted worked fine, turn computer back on today back to the same problem.
I could use some HELP.
This is my problem. I don't remember when this started but it's been months. It's my screen savers I have regular savers and Quartz savers and Quartz saver I made when I got Tiger. Went to change saver one day and all my Quartz savers were missing some savers that were not Quartz and the screen saver called my computer name has a blue file folder. I went thought the savers found some that made System Preference crash though them out still did not help, checked saver folder all there. I restarted computer some times were there, some times not might have to restart few more times to work. When I turn computer on next day some times would be all back some times not. Have had regular screen saver missing but when screen saver kicked in after some time it work but not in list. Checked folder again the saver were missing from folder too this time. I don't want to have to restart my computer each time I want to use those savers. Some time have to keep started over and over again in a roll to get to work don't think thats very good for my computer. I also did repair permission that didn't help. Don't know what to try next. Can anybody help.
PowerPc G4 (17 Flat Panel) Mac OS X (10.4.7) 1.25 GHZ, 768MB RAM. iPod Photo 60GB

Yes, I did try a new account and the screen saver still will not come on. I spent about an hour on the phone with Apple Support and the tech did seem sharp. After trying many things including your suggestion his opinion was that I downloaded something that wrote something into the screen saver Pref's or something to keep it from activating. The only screen saver I had downloaded around that time was a Superman one relating to the new Superman movie. I think I will contact the originator of that screen saver and see what he has to say. Apple support suggested I do a new OS install. Thanks for your reply to my post

MobileMe and RSS as Screen Savers

System Preferences/Desktop & Screen Saver/Pictures.
Is there a way to stop the Apple product ads from showing as one of my screen savers? I've tried several ways to eliminate them and haven't been successful. If the 'MobileMe and RSS'is checked, I see the ads; if the 'MobileMe and RSS' is not checked I get a message saying 'no pictures are selected'.

Sorry, I get it now. My issue was similar but not the same as yours. I have never subscribed to picture-only RSS feeds so I guess I can't address your issue. As I said, I was trying to have other peoples' MM galleries show up in the list of screen savers, which I was finally able to do using my instructions (you don't need to belong to MobileMe to do this by the way, all you need is the username of a friend who does subscribe and has set up a MM gallery - for example, my username is "rbarline" in case you want to check out my "public slide show" gallery as a screen saver ... :~)
Now I am curious about picture-only RSS feeds and would like to try one as a screen saver. Can you send me a feed URL to try? Maybe there is a way after all?

Slideshow Screen Savers

I am having unexplainable problems with certain screen savers on my G5 iMac running 10.4.11.
When I go into Screen Saver preferences pane, everything works normally. Every screen saver in the list works in the preview box, and all of them work in "Test" mode. However, all screen savers that show slideshows of any kind (Forest, Cosmos, iPhoto, WorldBook, and so on) show no photos (i.e. black screen) when the screen saver is activated.
My iMac was recently wiped and serviced by Apple professionals, and all applications and files were transfered back from a copy I made. (A partitioned hard drive was connected to the iMac in the setup stage of OS X and the files were transfered as if from another mac.) Knowing that the screen savers worked fine before but now they do not, I figure that this must have something to do with how the files were restored. What could be the cause of this problem, and how could it be solved?
Also, I just noticed, but iPhoto, iDVD, and GarageBand do not open any more! Could these two problems be related?
Thank you so much for any help.
Message was edited by: sffc

Thanks for the quick response. Here is some data from Console:
Launching iPhoto:
dyld: Library not loaded: ?/System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLife MediaBrowser
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Aug 14 18:50:54 my-imac-g5 crashdump[306]: iPhoto crashed
Aug 14 18:50:54 my-imac-g5 crashdump[306]: crash report written to: /Users/shanecarr/Library/Logs/CrashReporter/iPhoto.crash.log
WorldBook 2005 Screensaver:
2009-08-14 18:55:44.535 ScreenSaverEngine[313] CFLog (21): Error loading /System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTim eComponents: error code 4, error number 0 (Symbol not found: _kQTVisualContextCGMainDisplay
Referenced from: /System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTim eComponents
Expected in: /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
2009-08-14 18:55:44.546 ScreenSaverEngine[313] CFLog (21): Error loading /System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTim eComponents: error code 4, error number 0 (Symbol not found: _kQTVisualContextCGMainDisplay
Referenced from: /System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTim eComponents
Expected in: /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
This 6-line message was repeated dozens of times with only slight differences
Does this information help?

No puedo abrir desktop and screen savers y otras aplicaciones, tampoco me funciona java, por que?

no puedo abrir desktop and screen savers y otras aplicaciones, tampoco me funciona java, por que?

Fijate que la aplicación de preferencias no esté corriendo en 32-bit (haz click derecho sobre la aplicación de Preferencias del Sistema, opción obtener información y asegurate de que la casilla de 32-bit esté destildada).

Open qty errin Selection list For Ref Doc. screen while converting to order

Hi SAP Gurus,
For one of my materials, the open quantity is not updating in the Selection list For Ref Doc. screen while converting to sales order.
Can you please help me?
Thanks,
Ketan

Hi Senthilkumar,
I really appreciate for your kind Hint of SEL ID.
I created and assigned new 'Sel Priority' to the SEL ID same as for Routing.
Now while converting Planned order to Production order system is asking for Reference operation set as there is no such need of Routing as I already mentioned in previous post.
Regards,

How to populate both key and text in drop down list in dialog prog screen

Hi, Can anyone please advice how to display both key and text in the drop down list in dialog prog screen. I tried with below code. keys and texts are getting populated in values table but only text is appearing when click on drop down. need to display both key and text in the drop down. Thanks in advance.
TABLES: ZRPP_MODELS, ZRPP_FFLSTRATEGY.
TYPE-POOLS : VRM.
DATA : field_id TYPE VRM_ID ,
       values   TYPE VRM_VALUES,
       value    LIKE LINE OF values.
FORM fill_model_list .
select MODEL MODEL_DESC from ZRPP_MODELS into value.
    APPEND value TO VALUES.
endselect.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = 'ZRPP_MODELS-MODEL'
      values = values.
ENDFORM.

You need to concatenate KEY & VALUES
wa_values-key = '1'.
wa_values-text = '1 - One'.
append wa_values to i_values.
wa_values-key = '2'.
wa_values-text = '2 - Two'.
append wa_values to i_values.
wa_values-key = '3'.
wa_values-text = '3 - Three'.
append wa_values to i_values.
call function 'VRM_SET_VALUES'
    exporting
      id              = 'LIST_BOX'
      values          = i_values
    exceptions
      id_illegal_name = 1
      others          = 2.
a®

How do I access templates in InDesign? They are not listed on the welcome screen.

How do I access the templates in InDesign? They are not listed on my "welcome screen".

There are no templates with recent versions of InDesign.
However, the website InDesignSecrets.com has rescued the old ones from vintage CS4 days and has posted them on their website:
http://indesignsecrets.com/indesign-templates

How to create list box in selection screen

Hi Experts,
I want to create 2 list boxes, each one is having 5 fields. suggest me the logic.
Thanks.
Tony

Hi,
Below is the link to help you.
[List Box in Selection Screen;
Or here is the sample code.
TYPE-POOLS: vrm.
DATA: name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list.
PARAMETERS: ps_parm(10) AS LISTBOX VISIBLE LENGTH 10.
AT SELECTION-SCREEN OUTPUT.
name = 'PS_PARM'.
value-key = 'scooby1'. APPEND value TO list.
value-key = 'tweety2'. APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list.
Hope it will help you. Please revert back in case of any query.
Regards
Natasha Garg
Edited by: Natasha Garg on Jan 8, 2009 6:28 AM

List of 64-bit screen savers?

Similar Messages

Maybe you are looking for