List of Actions in Metadata Group edit screen
None of the documentation I've found actually defines all of these. Create, Edit Details, view details are pretty obvious and mentioned, but nobody seems to be able to define the rest. Not apple, not the 3rd party books and vids.
Could someone provide me with a list of definitions for
Search
List
Info
Thumbnail
Its not as obvious as it might seem. Thanks to anyone who can help.
http://documentation.apple.com/en/finalcutserver/administratorguide/#chapter=4%2 6section=9%26hash=apple_ref:doc:uid:TempBookID-ReplacedWhenAssociatingWithMessie rRevision-44257MET-1021842
http://documentation.apple.com/en/finalcutserver/usermanual/index.html#chapter=5 %26section=1%26tasks=true
http://documentation.apple.com/en/finalcutserver/administratorguide/
You'll have to dig through, there's no list, it'd be huge, though.
Going through the Apple Pro Training Series book on FCSvr 1.5 shows a lot of stuff, too.
Similar Messages
-
[CS3][JS] How to get list of Actions and Action Groups
Does anyone know of a Javascript method for retrieving the list of Action Group names and Action names as an array? I'm trying to do a check that the requested Action Group and Action is available before starting a script.
Thank you.If you look at Image Processor.jsx you shuld find them near the bottom of the script.
-
Issue with Add/Edit screen list values
Hi,
I have a requirement in ADF application to list down one table as initial screen. From that screen I can go to add screen or edit screen.
Currently in adding screen, I am collecting all the data to a backing bean and finally when save is clicked i am transferring value to View programmatically.
In my add screen i have some fields in list. Some of them are master details list also. They are independent LOV bindings.
Currently while saving I can access all the values from backing bean, But for list fields I am getting index values only. Due to that I have mapped corresponding attributeValues to get its primary key to save.
But when i go to edit screen, how to i get and map this index value back to list so that it will show proper value selected, exactly like how it was showing on add screen?
Regards,
SanthoshYou may consider the below suggestion which needs no manual coding for creating new record as opposed to your current way of collecting data into bean and transferring value to view and then saving it.
a. In add screen page, drop the view object from the data control as ADF Form without navigation buttons
b. As you want the creation form when the page is loaded, add createInsert method binding to the pagedef and then add invokeAction executable binding to createInsert with refresh mode as renderModel(you can specify refreshCondition too if you want to provide any)
c. Add Commit as button
Sireesha -
I want to delete a group on my iChat list, but it doesn't go away when I right click and delete it. No ones in the group and I tried the plus button on the bottom left of the list and I can't find "edit groups"
WordPress is in a class of it's own. It began it's open source life as a blogging system but it has evolved into a powerful, feature-rich CMS (content management system). In short, if you elect to use WordPress on your domain, you might just as well use it for your entire web site.
To work with WordPress, you will need a firm understanding of HTML, CSS and how PHP includes work.
WP requires you to set-up a dynamic work environment (see links below)
Find a WP Theme you like that won't require much customizing on your part.
Related Links:
http://wordpress.org/
Get one of the following testing servers for your OS and follow the installation instructions.
WAMP for Windows
http://www.wampserver.com/en/
XAMPP for Windows
http://www.apachefriends.org/en/xampp-windows.html
XAMPP for Mac
http://www.apachefriends.org/en/xampp-macosx.html
MAMP for Mac
http://www.mamp.info/en/downloads/index.html
Setting up a PHP development environment for Dreamweaver
http://www.adobe.com/devnet/dreamweaver/articles/setting_up_php_05.html
Creating a WordPress Theme in DW
http://www.adobe.com/devnet/dreamweaver/articles/creating_wordpress_theme_with_dreamweaver _pt1.html
Best of luck,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web-design.blogspot.com/ -
How to see class/characteristics of measuring points in list editing screen
Dear Sirs,
I have created meauring points for several functional locations.These measuring points have been assigned classes and characteristics.
How can I see these charactristics against measuring points in list edition screen(ALV Grid).
Thanks and Regards,
R N Sabat.Hi R N Sabat,
As per my knowledge , no std SAP transaction will show you asked details, You need to go for development of this report.
Please check with your technical team to get this in to ALV report.
Riyaj -
Bulk Edit for Metadata Group, Field, Lookup, Responses and Subscriptions
Hello,
Has anyone been able to bulk edit custom configurations in FCSrv Administration window (of course not IN administration window, but as it was editing there).
In other words: Let say that I have a custom configuration of Metadata Groups, Fields, Lookups, Subscriptions and Responses and I want to implement that in lots of FCSrv systems.
Another situation: I`ll upgrade my hardware and want to re-install FCSrv but I don`t want to loose all my configurations.
I`ll have to manually input each configuration? It`s possible to update just a file(s)?
I know that the backup from FCsvr does this, but its used for DB Backup and not Preferences. I do not want to restore or backup the DB.
Replacing this files (or some of them): com.apple.FinalCutServer.profile.plist and postgresql.conf do the trick?
RegardsAs is usual with the world of programing the answer turned out to be ridiculously simple! In the Elements.xml file for the button the javascript that launches the dialog with SP.UI.ModalDialog.showModalDialog was always using the top level site to get the
custom ASPX page. Doh! Adding the _spPageContextInfo.webServerRelativeUrl in front of the path to my custom ASPX page did the trick. None of this was noticeable to me since the code was loading fine in debugger and I could see that it had the correct SPWeb
because I was passing in the webURL as a parameter in the URL for opening the dialog. But when the ASPX was loaded I just got the labels.
var url = webUrl + '/_layouts/15/Generic.BulkEdit/BulkEdit.aspx?selectedItems=' + selectedItemIds + '&ListId=' + listId + '&WebURL=' + webUrl; -
How to remove mandatory field for Last Name in Personal Data Editing Screen
Hello All,
CUrrently we are using BP_ ERP5ESS1.31 SP5 & SAP_ESS 603 SP5.
All my ESS Services are Displaying fine and working from Portal.I am having the requirement like I need to make Last Name as Non-Mandatory field in Personal Data. While Editing the PD Screen, there i will find the * mark for Last Name filed, i checked through the Global Personalization Make as Mandatory is Not Personalized its showing, i think its defualt prpoerty,so i am unable make any changes from Portal w.r.t Global Personalization.
I checked in SPRO-- Personal Admin> Custmomizing User Interfaces>Change Screen Modifications, there i find the respective Module pool for those Infotypes and country Specific..
I cheked forModulePool MP000200--> P0002 and Variable Key-40(For India) P0002 - NACHIN -- LastName only OF Radio Button is Selected all other Rado buttons are not selected.
I Checked in V_T588MFPROPS view there for 0002 Infotype P0002 -- NACHN Mandatory check box is Checked all other check boxes are Unchecked.
How to make that Last Name field as Non-Mandatory in Personal Data Edit Screen, where i need to make the changes.'
Please list out the Steps..Where i need to do the configuration. And i assigned all the required ESS roles on the backend.
Thanks in Advance
AdapagHi,
I don't think supressing through Global Personalization will change the business logic. Within the Business Logic it checks for the mandatory field.
After the changes I guess you need to make the changes accordingly.
The below link might be of some help.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=profile&title=ESSPersonalInformationUIenhancementwithoutmodification&decorator=printable
Please correct if I am wrong.
Cheers-
Pramod -
HTML Client: How to display the edit screen of an item given its ID?
To edit a selected item, I could easily add a new button on the command line and choose the existing method, "editSelected"
But how to edit another item instead of the selected item? Like How to edit an item whose ID # is 10? i.e How to display the edit screen for an item with ID # 10?The methods such as 'editSelected' apply to screen property collections. Picking these pre-selected options automatically configure the parameter as '<my-collection>.selectedItem'.
If you want an action not directly related to the screen properties then you can choose one of the screen commands under the 'Navigation' list starting with 'show', as in 'show<my-screen-name'. If the screen command accepts parameters then you can
configure the parameter passing manually. In your example, if you added a local 'int' data property to the screen you could assign the ID to that and bind the parameter passed to the screen to that.
In the instances when not even that is sufficient, well then you write your own custom method.
Dave
Dave Baker | AIDE for LightSwitch | Xpert360 blog | twitter : @xpert360 | Xpert360 website | Opinions are my own. For better forums, remember to mark posts as helpful/answer. -
I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.
UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
So I am just even more confused now. -
This question is for anyone who has purchased an item from iTunes.
What action or actions do you take inbetween having selected the item to be purchased and having the word BUY appear on your screen for you to clic on it?
I have been told to clic on the price. When I do that this list appears; gift this, add to wish list, tell a friend, copy link, share on Facebook & share on Twitter.
Should I clic on one of thses or press enter after having clicked on one of these?
What action do you take inbetween having chossen an item to purchase and being able to see the word BUY?Thank you for the answer. Apple support has been working on this question for several days.
I don't think they see any difference between the two tabs as I didn't think there was any seperation and the arrow was the place to clic on the price.
What would it take to get your statment added to the iTune tutorial?
For that matter what would it take to get actual tutorials listed under the heading Tutorials listed at the bottom of most iTunes screens. If you clic on the heading Tutorials at the bottom of iTunes pages it lists ads not tutorials.
Thanks again for your help. -
How to create a transaction code for a function group with screen 100 as st
Hello ,
I have requirement where I need to create a function group and create screen 100, 200, 300 and include the function in the screens.
Customer asked me to create a transaction with the screen 100 as the starting screen.
Can you please let me know how to create a transaction code for a function group with screen 100 as starting screen.
[ It is not a module pool program ].
Thanks
Prashanth.
Moderator message - Please ask a specific question and do not ask the forum to do your work for you - post locked
Edited by: Rob Burbank on Jun 2, 2009 11:49 AMGo to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
Name of screen field: Value
D_SREPOVARI-REPORTTYPE RW
D_SREPOVARI-REPORT ZPCA
Save and transport accordingly. -
Missing RAW editing screen in PSE8 Trial version
Can anyone help me with this one?
I have previously used PSE6. When opening a RAW image I have first gone through a RAW Editor screen before editting in PSE6. When
I open a RAW image in the TRIAL version of PSE8 it takes me straight to the PSE Editor, missing out the RAW editing stage. My camera is an Olympus E510, about 2 years old.
The HELP files clearly show the RAW editing operation so I know the functionality is in PSE8. It seems to assume that the RAW editing screen opens automatically and I can't see what else to do. In desperation I turned on the FILE FORMATS Plug In to see if that would help - it didn't. I need to know there is a RAW Editor that I can use before purchasing the software.
Adobe have told me that they don't support the Trail version and so won't answer my question... Not exactly a recommendation of good customer service if their pre sale support is zero! Their official answer to the above question was that they did not support PSE6 anymore and that I should upgrade to PSE8 Their last suggestion was to ask this group.
If anyone has PSE8 and is prepared to try a .ORF file for me I'd be very grateful. Thanks, KeithWindows
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4626
Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4623 -
Iphoto 11 has black edit screen
My iphoto 11 pictures are not visible in the edit screen and the slideshow will not run. I've tried everything that I know and I'm at the point of deleteing iPhoto and do a clean install. However, I'm not clear on the procedures and if I need to purchase iPhoto (it came pre-installed on my mid 2010 macbook pro). Or should I need do a clean install on my mountain lion?
Next move:
reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
Allow only changes in specific Metadata Group
Hi,
I have users that are only created for the duplicator we are using.
I would like them to browser all items we have but cannot make changes to any of them - except one Metadata Group that I have created (in this group there are relevant status informations about duplication - as these accounts will be used by many different users I do not want them to be able to do too much..)
"duplication" is an own group with the users in there, I have also created a new Permission Set "duplicator" and assigned it to the group. But in the "Trait Permission" tab of the Permission Set it does not let me "Inherit / Permit / Forbid" for my Metadata Set?
Is there any way to solve this issue?
thanks
tobiTobi:
I'd start with creating a clone of the Review permission set then set Forbid to Edit Details for metadata group you'd like to restrict. -
Information pane metadata group
I am trying to locate the metadata group that controls the information panel that presents the asset info in the lower left square on the main FCSrvr screen. I wanted to add one or two more fields (video codec etc.)
Any clues?The group you're looking for is
Tiles - AssetInfoView
Maybe you are looking for
-
Rule or script to delete specific attachments in Mail?
Some people send signature images with every email, wasting disk space and making it difficult to search for emails with useful attachments. I would like to have a rule or script that deletes PointlessLogo.gif from incoming mail, while leaving other
-
Question on passing value to an HTML page and dynamic links
Hi, I just started using Oracle APEX and have the following questions: 1) I try to pass an order number from a report page to a blank HTML page that is supposed to be a shipping label. I cannot have the HTML page resolve the placeholder within HTML c
-
Hello...the superdrive in my macbook pro died recently so I purchased an inexpensive Samsung SE-208DB/TSBS external dvd burner (with USB). It has been burning so far now about 14 hours and still on 55%encoding. I have 45 GB available on system and no
-
I have been informed that the Adobe Flash player on my machine (MacBook Pro version 10.9.5) is out of date. I click on the link provided and all that happened is my installed version of MatLab (MATLAB Version: 8.3.0.532 R2014a) is initiated. Any Sugg
-
Let me preface this by saying that I have been able to connect to the destination Service Bus Topics and Queue using traditional .NET methods (e.g. System.ServiceBus.Messaging namespace) and the applications using those components are running fine on