List of activities before closing a plant permanently- Urgent please

Dear MM Gurus
i require your expert help in suggesting me a detailed action plan, here is my issue
we are going to close our plant in 1 month and i would like to know what are all the list of action points that we need to take care of from now on to finally we close,
so that we are left with zero unused stocks and all the open orders are all completed successfully, no excess, and so that this transition phase happens smoothly without any errors.from both MM/ WM/ PP/ QM and LE perspectives
also we plan to replace this current plant we are closing with a new plant and what should we do if
we need to copy all current plant config to new plant?
how to copy all the master data like material master, info records, SA's vendor masters etc over to the new plant-
is there any standard mass upload tools for this activity or do we need to create custom programs or which do you suggest to advice considering the very short time i have, pls explain in detail??

your response will he rewarded as this is very urgent
thanks in advance for your help and all your valuable responses are truly appreciated
chakri

Hi Chakri,
In this situation we look for below areas in MM
1) Closing stocks.
2) Open PO's
3) Pending Payments to vendors
4) Sub-Contracting status.
close all po's at cutoff date & take the closing stock of materials with value & note the g/l account value these should tally in new plant.
for po's pending for delivery close it or cancel it.
Material master / vendor master etc . . . master data's is adviseable to extended using LSMW or BDC.
Hope this will help u.
Regards
Rang

Similar Messages

How do I set Safari to prompt before closing multiple tabs OR reopen all of the closed tabs when when I relaunch the application? The "Reopen all windows from last session" is unselectable.

How do I set Safari to prompt before closing multiple tabs OR reopen all of the closed tabs when when I relaunch the application? The "Reopen all windows from last session" is unselectable.

It would seem if your choose "Show my windows and tabs from last time" '''''and''''',
*when you last closed Firefox, you had no web site open (just a blank tab), that it would open just that blank tab
*when you last closed Firefox, you had one or more tabs/web site open, that would allow you to "Restore Previous Session"
#Have you tried that?
#If so, what is happening in each circumstance when you reopen Firefox?
'''Restore Previous Session''' 
Open tabs are automatically saved when closing Firefox beginning in Firefox 4. To open your last session, after Firefox starts, click History > Restore Previous Session. For this to work
#You must be remembering history (Options > Privacy > Remember my browsing history).
#*See [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window-Privacy panel]
#You must not be using Private Browsing or permanent Private Browsing
#*See [https://support.mozilla.com/en-US/kb/Private%20Browsing Private Browsing]
#You must not use Clear Recent History or Clear history when Firefox closes
#*See [https://support.mozilla.com/en-US/kb/Clear%20Recent%20History Clear Recent History]
#*See [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window-Privacy panel]
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]

F-47 for assets procurement before closing year

Dear Friends,
Please advise, is it possible to do asset transaction for the new year before closing or carrying out the year end activities.
our situation is FY Jan to Dec. We have not carried our year end activitites yet for year 2009, but now we need to do new asset transactions for year 2010 like we want to make F-47, F-48 for new asset.
Please reply ASAP.
Thanks.
Sunil.

Sunil
You can allow advance payments by activating / ticking the Special G/L in OB41 for posting keys 70 & 75
Test it first, if you want.
Rgds
Zubin

Cannot save opened tabs before closing the browser

Cannot save opened tabs before closing the browser. I do not know if there is such a feature (should be), and how to activate it.
It was very useful with previous version.

One change in Firefox 4 is to by default stop Firefox displaying the warning message, but it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

How to remove the warning "do you want to save changes to investigation.pdf before closing"

Issue: To remove the warning "do you want to save changes to investigation.pdf before closing"
I have created a XFA pdf file(using LC Designer 8.2) to display this issue
I am not able to attached the PDF. Without attaching the pdf it would be difficult to explain.
click event js:
function activateUser() {
var PDFVersion=xfa.host.variation+xfa.host.version;
xfa.host.messageBox("button click event registered");
xfa.form.form1.sendForm.welcomeMsg.presence = "invisible";
xfa.form.form1.sendForm.successMsg.presence = "visible";
event.target.dirty=false;
docReady event js:
function displayInfo(){
var res =xfa.host.variation;//Added this line to display the successMsg
//xfa.host.messageBox("docReady event registered");
xfa.form.form1.sendForm.welcomeMsg.presence = "visible";
xfa.form.form1.sendForm.successMsg.presence = "invisible";
docClose event js:
xfa.host.messageBox("docClose event registered");
event.target.dirty=false;
Steps to get the warning:
1) Open the attached pdf using Acrobat Professional.
2) Click the Confirm Enrollment" button
3) Now close the document & the acrobat gives a warning "do you want to save changes to investigation.pdf before closing"
Summary of the XFA pdf:
It has two text fileds. On docReady event field A is made visisble & field B is made invisible.
On button click event the field A is made invisisble & field B is made visible.
On closing the pdf it should not throw this warning message.
My Efforts:
1) Found a property in adobe js docs.
       event.target.dirty=false;
It doesn't solve the problem.
2) I tried to put this logic in almost all the events listed in designer but I am not able to resolve the issue.
Please help me resolve this issue.

I tried putting the below 2 lines of code at the end of button click event & docClose event.
      event.target.dirty=false;
      event.target.requiresFullSave=false;
It still gives the warning.
Also I tried to found out the line of code which is making the pdf dirty.
xfa.host.messageBox("is doc dirty (before displayInfo's visible-invisible work): " + event.target.dirty);
xfa.form.form1.sendForm.welcomeMsg.presence = "visible";
xfa.form.form1.sendForm.successMsg.presence = "invisible";
xfa.host.messageBox("is doc dirty (after displayInfo's visible-invisible work): " + event.target.dirty);
The doc got dirty when the successMsg field is made invisible.
Problem I am trying to solve is:
     To display a welcome message before user action and after user action wants to display a success message.
     I follwed the visible & invisible approach & it wokred but gives me a warning on doc close.(Highly imp to avoid it)
Is there any other approach I could follow here.

Saving all checked menu items before closing the vi (.exe) panel to a file & restoring it later

Hello all,
I am using a customized menu bar for my labview application. I need to have a feature to save the context of the entire menu bar before closing the vi and also to restore it later on reopening. Basically I have given menu items which get "checked" upon user selection. Is there any efficient way to handle this?..Though I have seen an example (under default examples which come with labview) of context saving for controls and indicators, but it is becoming tedious for menu bar as it has a lot of menu items to be saved.
Please suggest something for this.
Thanks

Maintain an array that keeps track of all the menu items that become checked or are changed to a non-default status. Every time a menu gets changed, add that to the array. Anytime that a menu gets set back to the default value, search the array and delete that item from it.
Now when your program closes, you have an array of everything that is non-default. Write that out to a file. When your program restarts, load that file and change all the menu times listed to match.

Validation before closing JOptionPane

Hi,
I am displaying list of names(with check boxes) using JOptionPane show message dialog. I want to check whether at least one name is selected from the list. This check has to be performed before closing the JOptionPane. How to implement this and explain how to implement event listeners.
Sabarish R L

Read the JOptionPane API and follow the link to the Swing tutorial on "How to Make Dialogs" which contains a working example.

The last few days I have been constantly saving my file. About an hour ago I opened my file and the most recent work wasn't saved even though I'm sure I saved it before closing. What can I do? Also, when I have tried to email it to myself as a backup, the

The last few days I have been constantly saving my file. A couple of hours ago I renamed the file and then reopened my file a little while later, but the most recent work wasn't saved even though I'm sure I saved it before closing. What can I do? Also, when I have tried to email it to myself as a backup, the fields aren't populated when I open it up. Fyi, I have the free subscription.

Hi Constance,
As i understand your changes in the pdf were not saved...Are you still facing this issue?
Regards,
Rahul

How do I move a group of tabs before closing a window?

I recently lost all my custom settings on Firefox after an aggressive tech support person "cleaned" my browser settings. When this happened, I lost the ability to move my open tabs to a new group before closing the window they were in.
Previously, when I had multiple windows open, and I initiated an "Exit" or "Close" command on one of the open windows, 2 things happened:
(1) First I received a warning message asking me if I wanted to close the window
(2) Then I received a second warning message asking me if I wanted to move my tabs before closing the window.
Now, I only receive the 1st message, and I am no longer offered the option of moving my tabs to a new window before closing the current window.
I've tested this both with and without the Tabs Group Manager which I was using prior to the time my browser was "cleaned", and I still have not found a way to restore this missing feature.
Unfortunately, I don't know if this feature/option is:
-- provided as a default in Firefox
-- a customizable feature in Firefox, or
-- a feature in a Firefox add-on.
Can anyone tell me where/how to restore this option to move a group of tabs before closing a window?
Thanks,
Metta

Thank you, guigs2, for your feedback, and my apologies for the confusion. After rereading my question, I realize I made a couple of typos in my original help request which cannot now be corrected. Specifically, the 2nd sentence in the first paragraph should have read:
"I lost the ability to move GROUPS of open tabs to a new WINDOW before closing the window they were in."
This means that, as far as I can tell, neither of your plugin recommendations applies:
-- Apparently, Tab Mix Plus only applies to manipulating tabs WITHIN the existing window and, unless I am missing something, I did not see any reference to the option I'm looking for -- specifically, an automatic prompt offering to move groups of tabs to a new window before closing the existing window.
-- Unfortunately, the other plugin you mentioned (Tag Cloud) appears to be non-functional in the current version of Firefox, based on the most recent user reviews.
In light of this, I will consider the possibility of resubmitting my question with the typos corrected -- and, in the meantime, if there is any additional feedback that you (or anyone else) can offer, I would be most grateful!

Before closing down the machine, how can I close all the open programs?

Now that the iMac automauically starts up with the programs in use when closing, I find that this is delaying my start.
There must be a shortcut to close all the open programs before closing the machine.
Kindly advise.

If by 'closing' the machine you mean shutting it down, there is a checkbox in the Shutdown confirmation window which is preset to re-start all apps at startup which were open when the machine was shut down. Uncheck that item in the Shutdown confirmation window.
Unfortunately you'll need to do that each time you shut the machine down.

BAPI to fetch list of Activities based on Transaction type

Hi All,
I am looking for the BAPIs for the below functionalities:
1.Which takes import parameter as Transaction type and gives all the activities pertaining to that particular transaction type.
2. Which takes input as date paramters (start and end date) and transaction type, and the output is a list of activities which meets the above criteria.
3. Which takes the input as Partner Function code and BP number and it returns all the activities which meets this criteria.
Will appreciate if the details are given to me as soon as possible.
Many thanks in advance...
Regards
Bala

Hi all,
I am currently working in an integration project . I have to get all the table names based upon the functional modules(MM,FI,SDetc). Can anyone tell me the name of the standard BAPI/RFC which can be used for this requirement?
In detail I can say that I have to give input as the functional modules(MM,FI,SDetc)
and I have to get all the table names which is used for this particular functional module in return.
I have already tried to search out for that using several method. If anyone know the exact RFC name then please reply.
Here functional modules refers to Business Modules such as Material Management(MM) etc.
Thanks in advance.
Regards,
Nitin Kumar

How to send a warning message before closing soft via X of the title bar

With labview 8.2:
I would like to send a warning message before closing my soft when the user press the "X" of the title bar. Is it possible to do that without a Windows dll?
Thanks a lot,
Daniel.

Gerd,
I think a filter event for 'Panel close?' is more appropriate because you have the possibility to cancel the event or continue the event.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.
This is very annoying and we need this stopped as we have made no changes to any of the adobe files. Please advise how to do this.
Customer Service DCC

I first tried the version without the deflated stream (so everything uncompressed) against the online repair tool to check/analyse it @ https://www.pdf-tools.com/osa/repair.aspx
And it says no error found, but the reader still want to save it when closing so i still had no clue at this point.
Fortunately, i finally found what was wrong with my generated PDF.
In my xref table, each object reference was not end by a full EOL, i only did put a newline char.
Now i have "carriage return" "newline" which is the full EOL and the reader is happy and close the file silently.
As suspected i did not follow correctly the specs on xref table
Now i'll go and figure what i did wrong with the deflate filter
Thanks for your help.

How to list incompleted sales order documents by plant or profit center

Hi, Is it possible to to list incompleted sales order documents by plant or profit center? How?
Thanks very much.

Hi
You can have list of open sales orders wrt to plant and probably it may be useful to you.
This can be done with configuration so that you can add plant to the selection criteria in the T code VA05.
Goto IMG - Sales & Distribution - Sales - Lists - Define Selection Criteria - Execute
Click New Entries and enter the below fields save the changes.
Program Name - SAPMV75A
TRG (Transaction Group) - 0
Display Group - K
Event - SELK
It - 8
Field Name - WERKS
Goto VA05 and now you can see the field Plant in the Fur Sel Criteria.
Regards,
Phani Prasad
Edited by: phani.prasad on Nov 8, 2011 9:36 AM

Unexpected & Unnecessary Popup "do you want to save changes to 'x' before closing ?"

Hi Im running a code that is opening a pdf doc and reading some stuff from it (not editing it).
avDoc = CreateObject("AcroExch.AVDoc")
avDoc.Open(FileBox.FileName, "x")
accroApp = CreateObject("AcroExch.App")
accroApp.Show()
accroApp.Hide()
accroApp.Exit()
avDoc.Close(0) 'accroApp = Nothing
But when I close it gives this question "ONLY SOMETIMES"
"do you want to save changes to 'x' before closing ?
Previously, i just forced it to save at all times before closing.
I guess there is a way to avoid this, by setting some dirtyflag=false/true?
Pls help
JS

Check out this post - http://forums.adobe.com/message/3871646#3871646
My issue was similar and I finally got it to work.

List of activities before closing a plant permanently- Urgent please

Similar Messages

Maybe you are looking for