List of all Business contents for cProjects
Can anyone give me the list of all the business contents used in cProjects.
Regards
Amit
Hi Amit,
Go through this links,
http://help.sap.com/saphelp_erp2005/helpdata/en/17/ff372669bceb4eb5483d16408b448e/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/17/ff372669bceb4eb5483d16408b448e/frameset.htm
Regards,
Azaz Ali.
Similar Messages
-
Problem in installation of Business Content for Solution Manager
Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lotHI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar -
Business Content for SAP BW ,WAM work order ans asset management
Hi All,
where can i see the business content for sap work order and asset management. can i see it in help.sap.com
i tried but could not get . any url would be appreciated.
Regards
SriniThanks AHP for pointing out.
From BW help link as below
http://help.sap.com/saphelp_bw33/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
go to BI Content > Financials > Financial Accounting > Asset Asset Accounting
for Assets
go to BI Content > Financials > Controlling > Overhead Cost Controlling > Overhead orders
for Internal Orders
Hope this time it is fine.
Cheers
Anurag -
What is the standard business content for BCS on bw3.5?
Hi all,
Can anyone let me know the standard business content for Bcs on bw 3.5?
Thanks
PoojaYou can find this in the delivered business content under SEM > Business Consolidation System (BCS).
-
Hi all,
we are working with the new TM8 system and we'd like to extract some data from there to BW system.
Our BW system is SAP BW 701 with BI Content 704 (SAPK-70404INBICONT).
Is there a way to install Business content for ramp-up systems like TM8 on BW 701?
Any hint will be greatly appreciated!
Tnx in advanceAs of SAP NetWeaver 7.0 BI Content Add-On 5 SP02, the following new business intelligence (BI) content is available for SAP TM 8.0.
So I guess if you have BI BI content 704, you have all the content for TM in your BI repository. You can check it from RSA1.
Please check link FYI. http://help.sap.com/saphelp_nw70/helpdata/en/90/ba73217b134899aef326bdfb814de2/content.htm
- Sandy -
Business content for Investment Management & Travel management
Hi All,
I am trying to install Business content for Investment Management & Travel management, I found the content in 3.x flow with Infosource. once I raised with SAP they also reply with 3.5 flow. I am doubt full to build with 3.5 flow because 3.5 flow SAP support date over on 31.03.2013. SO how they will support. Please put some light if some one have any idea.
Cheers
AnilHello Anil,
this community deals with the SAP product 'SAP Landscape Transformation'. Can you pls. indicate in which SAP component you have the issue? I guess that the current community might not be the right one.
Best, Heike -
Is there any business conent object for FI-SL in BI side ( I mean cube, DSO, or queries, etc) ?
We are going to implement FI-SL. The only thing I can find is that I have to generate the data source by myself. I don't find anything at BI side. Is there any sample queries, cubes ?Hi ,
FI-SL DataSources cannot be delivered by SAP with BW Business Content for non-standard ledgers,
because the ledgers and their FI-SL totals tables may link to user-defined fields and structures.
All other FI DataSources (FI-GL, FI-AR, FI-AP) are delivered with Business Content.
To provide an FI special ledger DataSource for BW, an extract structure (=transfer structure) must be
generated for the FI-SL totals table in question. You then have to define the DataSource for the totals
table ledger.
Check this link:
http://help.sap.com/saphelp_bw32/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
Hope it helps,
Regards,
Supriya -
Business Content for Billing, Booking
Hi Experts,
We are required to activate the Business Content for Billing and Booking areas under SD for our BI Implementation. Where can I get the list of Business Content (Infoproviders, Infosources, Datasource, Reports etc.) for these areas.
I searched on SAP help, but there are no InfoProviders or reports on Billing or Booking under the 'Sales' or 'Order Fulfillment' tree. Can someone give me a list of Business Content for billing and booking.
Any help would be appreciated.
Thanks and regards,
T. N.Hi
billing is 2lis_13 sources. search for that and you will find lot of information.
see CRM -> Sales -> Sales Analyse for R/3 SD: http://help.sap.com/saphelp_bw33/helpdata/en/1f/0bf23839caf878e10000000a114084/frameset.htm
Regards,
Juergen -
Business Content for EC&O (Engineering Construction)?
Hello all,
I am searching the Business Content for the specific SAP module EC&O (Engineering Construction), but I am unable to find anything in help.sap.com.
Anyone knows if exists any Business Content for this module?
Thank you in advance,
XaviHi Ennio,
You can find most of the Business content info in Real Estate management:
http://help.sap.com/saphelp_nw04/helpdata/en/73/7bda385925044ae10000000a114084/frameset.htm
Also check these links:
http://help.sap.com/saphelp_dimp50/helpdata/EN/d7/1f4b36ea16571be10000009b38f889/frameset.htm
Bye
Dinesh -
Install Business Content for Asset Accounting
Hi All
I am not able to install business content for Asset Accounting. I collected oFIAA info area with data flow before and afterwards and mode automatic. I checked the boxes for info objects, DSO multi providers etc and clicked installation and transport so as to get a transport request which I want to transport to production if all is well. It is prompting for a request which is already present and not allowing to change. I cancelled this process, created a new request in transport organizer and assigned the installation to this request. But afterwards it again prompted for the previous request and I aborted the process. What should I do to install the content as I don't want to transport a previous request since I didn't create it and I don't know what will happen if I transport. Sorry for the long story.
Regards
SubinSome objects were already locked in the request , that could be the reason why It was prompting previous request number
Goto that request in SE09/SE10 - Remove the objects from the tasks or
Goto SE03 - Unlock Objects (Expert Tool) - enter request number and unlock all the objects from the request
Now goto Bus.content - Install and when it prompts for request enter new one
Note : I would suggest you to remove all the unwanted objects from old request though they are unlocked , In future it will be a problem if someone tries to use that request , or change description to do not transport so will people will think about this request not to use and transport -
XI Business content for MDM - Syntax error in IDOC adapter
Hi mates,
I'm trying out the Master Data Harmonization scenario for Vendor data with R/3 as the client system. I'm using SAP delivered XI Business content for MDM. The mapping program is generating ADRMAS and CREMAS IDocs but the IDOC adapter reports that there is a syntax error in ADRMAS IDOC. Find below the details.
<i><SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:Stack>
<SAP:Retry>M</SAP:Retry></i>
Generated ADRMAS IDOC is
<i> <?xml version="1.0" encoding="utf 8" ?>
<ADRMAS02>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1" />
<E1ADRMAS>
<OBJ_TYPE>LFA1</OBJ_TYPE>
<OBJ_ID>0000500140</OBJ_ID>
<CONTEXT>0001</CONTEXT>
<E1BPAD1VL SEGMENT="1">
<FROM_DATE>00010101</FROM_DATE>
<TO_DATE>99991231</TO_DATE>
<NAME>Swift Transportation</NAME>
<COUNTRY>US</COUNTRY>
<COUNTRYISO>US</COUNTRYISO>
<LANGU>E</LANGU>
<LANGU_ISO>EN</LANGU_ISO>
<SORT1>SWIFT TRANSPORTATION</SORT1>
<TIME_ZONE>CST</TIME_ZONE>
<E1BPAD1VL1 SEGMENT="1">
<LANGU_CR>E</LANGU_CR>
<LANGUCRISO>EN</LANGUCRISO>
<ADDR_GROUP>BP</ADDR_GROUP>
</E1BPAD1VL1>
</E1BPAD1VL>
</E1ADRMAS>
</IDOC>
</ADRMAS02></i>
Strangely, the control record is blank. I looked at the XSLT program, it is coded that way. I do not understand the reason. Is the error pointing to the control record?
Look at the code sample from XSLT mapping program
<xsl:for-each select="IDOC/*/E1ADRMAS">
<IDOC BEGIN="1">
<!-- The header data of each single ADRMAS-IDoc needs to be there but does not require specific data -->
<EDI_DC40 SEGMENT="1"/>
<xsl:apply-templates select="."/>
</IDOC>
</xsl:for-each>
How can an IDOC w/o control record be posted?
Did anyone come across this error? Whats wrong/missing?
I appreciate ur inputs.
thx in adv
praveenMoorthy,
I tried reloading the IDOC metadata from IDX2. Still I get the same error.
Regd, IDOC w/o control record, can u elaborate on "dynamic value while posting IDOCs". From where, XI message SOAP header with Business System replaced by corresponding logical system names?
Thanks
Praveen -
Error in Installing the Business Content for 2LIS_06_INV data source
Hi Experts,
We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
Regards,
Kavitha JagannathHi,
Follow bellow steps:
1. Goto RSA1.
2. Select the BI content.
3. Select the Grouping as' In Dataflow before and after'
Then,you can get the data flow which are haveing the DS/TR/Data targets.
4. Select the Install by setting the 'Install in background'.
Regards. -
Installing business content for 0MKT_DSO1/0CRM_LEAD_H
Hi
I am getting an error whilst installing the business content for any DSO/Infocube.
Grouping
In data flow before.
Error : Rule (target: 0GN_PAR_LSY, group: 01 Standard Group): Syntax error in routine
where as same DSO whilst acitivated wiht diff source system has no errors.
Old source system 199 - No error whilst acitvation business content - (SANDBOX)
New source system 200- error whilst acitvation business content - (DEV)
If Grouping
Only necessary objects are selected above error is not there.
But when after new transfer rules have been created and when infopackage is run, i get another error
error : DataSource 0CRM_LEAD_H is not defined in the source system
Now no data loads for new source system.Hi hungryRaj:
On your source system use Tcode RSA6 to verify if DataSource 0CRM_LEAD_H is active, if not activate it using Tcode RSA5.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Aug 2, 2010 10:00 AM -
Where to download MDM Business Content for PI 7.0/7.1?
Hi Everyone!
I kindly ask for your help on my problem: I am not able to find the MDM Business Content for PI 7.0/7.1 anywhere. I searched in the Service Marketplace for a long time, but without any results... https://websmp109.sap-ag.de/installMDM seemed to be a good place for it, as well as in "Software Distribution Center" -> "Support Packages and Patches" -> "SAP Content" -> "ESR Content (XI Content)", but neither supply the adequate file
Can anyone help me? Thank you very much!
Best regards
BenediktChristian, thank you very much!
Call me blind, but I still can't find it.
After Navigating to Support Packages and Patches --> SAP NetWeaver as suggested, I just have the following options:
SAP NETWEAVER
ADAPTIVE COMPUTING CONTROLLER
SAP NW IDENTITY MANAGEMENT
ACCEL. AD FOR SAP NETWEAVER
Technology components releases prior to SAP NetWeaver
When I follow to the first option (SAP NETWEAVER) I just have the options for various releases of SAP NetWeaver, but no MDM in one of them
Do you have another hint? -
BI 7.0 Business Content for EH&S
Hello,
I've only found "healthcare" business content but it's more related to hospital management.
Does anybody know if there are bi 7.0 business content for Labor Health in companies which aren´t hospitals or health centers.
Thank you very much
Best regards
IRBHello again,
I've found Industrial Hygiene and Safety content:
Hazardous Substance Inventory
Accidents: Persons Involved
Accidents: Safety Measures
Accidents: Complete View
But it seems there's nothing about procedures and medical tests made to employees of a company (other than a hospital)...
Thanks
Regards,
Irb
Maybe you are looking for
-
Blue download progress bar will not disappear from the downloads folder in the dock
see topic. I appreciate any assistance. I have restarted, shutdown, started & finished other downloads etc. Still won't disappear.
-
HELP! How do I un-install and then RE-install Camera Raw 5.7 on my Mac?
My CS4 would no longer open my RAW files (Canon 5D Mark II) and I was told (on this forum) that I needed to update my camera raw to 5.7. So I downloaded 5.7 but could not figure out HOW to get it installed in the proper place. After trying but not su
-
CS07 - Functional Module ? User Exit ?
Hi , Is anybody can give me some instruction ? We would like trigger another program which we developed by ourself when use T-Code:CS07 to assign BOM to Plant . Is any functional module or user exit we can use ? Thanks !
-
Reader XI 11.0.01: Shapes yes; sticky notes yes; highlighter/other text NO. Please help. Thanks.
-
Captivate 6/HTML5 URL loading but Captivate page drops to a 404
Hi All! I"m sure this is something simple, but I just can't seem to figure what's going on. I have a Captivate 6 project (http://cs.franklin.edu/~heinem01) that has several slides linking out to HTML5/jQuery pages for some interactivity. I have adv