List of all cubes and business descriptions.
What is the best place is to get a list of all cubes and ods's along with their business descriptions? Also, where can we find a list of all cubes, ods's and process chains containing these tables?
Thanks,
MB
go to metadata repository
in RSA1 n u will get list of all cubes, odses , queries.....(which are active n in use)etc
in SE11
tables for infocube:-
RSDCUBE
RSICCONT
for ODS:
RSDODSo,
or type RSDOD* n press f4
u will get all tables of ODS
for Process Chain:
typr
RSPC* n press f4 u will get all tables of process chain
Edited by: Arun Purohit on Apr 25, 2008 8:13 PM
Similar Messages
-
Is there any way to have a COMPLETE list of all samples and loops ( Logic 8
I'm sure it's been posted previously, but anyway, I'm looking to buy new Apple Loops libraries and I have faced the fact , that many of the sounds and loops produced by third parties manufacturers have been already included in Logic installation discs.
I have a list of Apple Loops DVD's that have been included with Logic somewhere, the problem is, Apple didn't post ( I believe) the credits of all 3rd party manufacturers that have produced these libraries that are included with Logic or Garage band. Is there any way to have a COMPLETE list of all samples and loops that are included with Apple DAW's so I wouldn't duplicate anything ? I'm pretty much positive that Apple had other companies to sound design and sample all libraries for them, so is there also a way to have a list of those manufacturers? Again, the objection is to start upgrading the sound library without any possible duplication?
Thanks in advance!Chris, I certainly don't mind additional questions and postings.
I believe there are many issues with Apple Loops and Logic that need to be resolved and people need to be aware of that. Unfortunately, in opposite to the old "german" version of Logic , there's no lifetime tech support, you can't even call and ask the question after 60 days , which isn't right for a professional software of this level, especially considering the fact that many things still remain vague in Logic even for developers and tech support people!( believe me, I've called and asked!)
Issues like that need to be resolved over the phone with the company, period!
One thing I also learned over the years as a Mac OSX user, if something doesn't work, don't mess with it. Delete your drive and re-install everything. This is very frustrating , I know, but unfortunately this is the only way to deal with OSX issues, if you got a problem with your system, don't try to fix it. It's never gonna be the same again. I know , it's off the topic a little bit, but if your content is missing from the system files, before installing your new Logic, back up your important files, wipe up your drive and clean install Mac OSX , run updates and then install the Logic. Most likely , everything will be in it's place, at least 90% or more. I gave up trying to make two system in my house to be compatible 100% , but it's OK if they're 90% or more identical. I spent enormous amount of time trying to find out what's missing and where, I visited most of the forums and there's no clean answer.
Message was edited by: Moderator -
Query to get a listing of all folders and joins in EUL
If anybody has a query that provides a listing of all folders and joins between those folders in a Discoverer EUL, can you please share it.
Any help would be greatly appreciated.Hi
As Rod commented you won't get an accurate listing going through XREFS. You need to look in the statistics table, EUL5_QPP_STATS where you will find a history of all worksheets that have been executed. Unfortunately the item columns in EUL5_QPP_STATS are encoded so you will need some special SQL to uncode them.
First of all you will need to have installed the EUL extensions which can be found in the script called EUL5.SQL (located in the Discoverer\Util folder where Admin is installed) when logged in as the owner of the EUL. Theh try running this script, altering the data switch to a suitable date:
SELECT
QS.QS_DOC_OWNER USER_NAME,
QS.QS_DOC_NAME WORKBOOK,
QS.QS_DOC_DETAILS WORKSHEET,
TRUNC(QS.QS_CREATED_DATE) EXECUTION_DATE,
*(LENGTH(TO_CHAR(EUL5_GET_ITEM_NAME(QS.QS_ID)))+1)/9 ITEMS,*
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),1, 6)) ITEM1,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),10, 6)) ITEM2,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),19, 6)) ITEM3,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),28, 6)) ITEM4,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),37, 6)) ITEM5,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),46, 6)) ITEM6,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),55, 6)) ITEM7,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),64, 6)) ITEM8,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),73, 6)) ITEM9,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),82, 6)) ITEM10,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),91, 6)) ITEM11,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),100,6)) ITEM12,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),109,6)) ITEM13,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),118,6)) ITEM14,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),127,6)) ITEM15,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),136,6)) ITEM16,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),145,6)) ITEM17,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),154,6)) ITEM18,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),163,6)) ITEM19,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),172,6)) ITEM20
FROM
EUL5_QPP_STATS QS
WHERE
*(LENGTH(TO_CHAR(EUL5_GET_ITEM_NAME(QS.QS_ID)))+1)/9 < 21*
AND QS.QS_CREATED_DATE > '01-JAN-2009'
Best wishes
Michael -
FM to get list of all directories and files on application server..
Hi All,
Can anyone tel me FM to get list of all directories and files on application server..i know 'F4_DXFILENAME_TOPRECURSION'
and '/SAPDMC/LSM_F4_SERVER_FILE' these are working too...but my requirement is when i click F4 i should get list of directories and whn i select one of these the only directory name should display.....and whn click again for 2nd text box field i want file name ...means directory name in one text box field and file name in another....plz help me out..
helpful answers wil b awarded.
Thanks,
JayshreeHi Jayashree
Please check this FM, SUBST_GET_FILE_LIST. Pass the file path and file name, if it returns an entry in table FILE_LIST, then the filename and path are valid.
Hope this helps !
~ Ranganath -
I have just purchased a Mac Book Pro. I would like to find the list of all updates and downloads that have occurred since purchase. Where can I find that info?
I know how to do the updates. What I dont know is what size each update that I have completed was. I am having a data usage disagreement with my Telco and want to prove to them that this computer did not download the amount of data they are claiming it did.
-
Command to provide list of all objects and their scripts from database
Hi,
How do i get the list of all objects and their scripts/source from database?
I guess using dbms_metadata package or Toad tool we can achieve the above task
But i do not know the steps to get the objects and their scripts.
Im using oracle database 11g R2 11.2.0.2
Kindly ge me the advice
Thanks in AdvanceHow do i get the list of all objects and their scripts/source from database?
I guess using dbms_metadata package or Toad tool we can achieve the above task
But i do not know the steps to get the objects and their scripts.
Im using oracle database 11g R2 11.2.0.2If you want the all the metadata of whole database, then it is quiet difficult to get from DBMS_METADATA, as it is very complex because you need to gather for each object of each schema in whole database and to spool.
http://www.orafaq.com/node/57
I want to know, what is the use of entire database metadata, Certainly need of objects of metadata.
or if you want to whole database, then i suggest you go for export full backup and import as impdp sqlfile option, -
I have a few collections, but not all PC's in those collections are listed in "All Desktop and Server Clients". Does anyone happen to know the reason for this? It should have at least the same number of clients as the largest collection.
Thanks,
James
James A+, Network+, MCPHi James,
The All Desktops and Server collection only contains devices that show client=yes.
Meaning the Configuration Manager client is installed on those devices.
This WQL query will give you a collection of all devices that do not have the client installed.
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where (SMS_R_System.Client is null or SMS_R_System.Client = 0) and SMS_R_System.Name != 'Unknown'
Another handy collection is all clients that are inactive (No communication for the default 7+ days)
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_CH_ClientSummary on SMS_G_System_CH_ClientSummary.ResourceId = SMS_R_System.ResourceId where SMS_G_System_CH_ClientSummary.ClientActiveStatus = 0
I normally create both and then a third collection of all devices and exclude the above two which should show you all healthy devices.
Have a look at the ccmsetup.log file on the client if it has attempted to install the ConfigMgr client but failed. -
MDX query with DMV to get all cubes and aggregation row count on SSAS engine
Hi All,
How can I get all cube names on a SSAS engine server and count of number of aggregation rows in each cube ?
I got a DMV where it shows all catalogs names and description but where can I found aggregation row count of each cube.
Please let me know, thanks in advance.
Maruthi...Hi Maruthi,
Please check below link, hope this will help you.
SSAS 2008 CTP6 – new DMV $SYSTEM. DISCOVER_ OBJECT_ ACTIVITY
lists the memory usage and CPU time for each object i.e. cube, dimension, cache, measure, partition, etc. They also show which aggregations were hit or missed, how many times these objects were read, and how many rows were returned by them:
Discover_object_memory_usage and discover_object_activity
select * from $system.discover_object_memory_usage
select * from $system.discover_object_activity
Thanks
Suhas
Mark as Answer if this resolves your problem or "Vote as Helpful" if you find it helpful.
My Blog
Follow @SuhasKudekar -
iCal 5.0.2 (1571) Is there any way to change this? I can't do it in preferences.
This is a real pain. To make an event for a specific time I have to double click again, uncheck "All Day" and then put in the time for the start of the event. Even then, if I put in the start time, the end time remains at 6:30 PM, so I have to change that too.
If I really do want an All Day event, why does it sometimes default to Busy, rather than always to Free?
The old iCal was far superior in this regard; double click once on a day and the add an event dialogue box appears, defaulting to a time close to when you were making the event, and, if my memory serves correct observing the preference I set with respect to default length of the event.
I'm aware that Command N gets me a new Quick Event, its a bit better in that if the event i enter opens the big "add an event dialogue box", it has defaulted to an hour long event. But, if I click on a day, and then hit Command N, the new event is put in Today, and not the day I had selected. It also defaults to All Day, unless I put in a time for the event in the Quick Event box. Why would I do that when I know I want to enter info into a number of fields, and doing so is easiest from the big dialogue box. If i don't enter a time in Quick Event, or enter a day, I still have to double click the event that was created by Quick Event to open the big dialogue box, and start fresh entering everything. So, I find Quick Event's implimentation cumbersome, overall ending up with more keystrokes and clicks to enter the details I normally enter, than the old iCal.
So, if someone knows how to change the double click behaviour back to the old way, or how to get Quick Event to open the dialogue box on the day i have already selected, any help will be appreciated.
Also, is there some way to get this feedback to Apple? Support SiteMap doesn't show a link for feedback.
Thanks
IanI have sort of the exact same problem. Extremely far away from user friendly
I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
All in all this gives a lot of changes just to enter an event.
Command N
I learnt from your input to use this fuction. At least that comes up with a one hour event as default. -
Getting list of all users and their group memberships from Active Directory
Hi,
I want to retrieve a list of all the users and their group memberships through JNDI from Active Directory. I am using the following code to achieve this:
==================
import javax.naming.*;
import java.util.Hashtable;
import javax.naming.directory.*;
public class GetUsersGroups{
public static void main(String[] args){
String[] attributeNames = {"memberOf"};
//create an initial directory context
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL, "ldap://172.19.1.32:389/");
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL, "[email protected]");
env.put(Context.SECURITY_CREDENTIALS, "p8admin");
try {
// Create the initial directory context
DirContext ctx = new InitialDirContext(env);
//get all the users list and their group memberships
NamingEnumeration contentsEnum = ctx.list("CN=Users,DC=filenetp8,DC=com");
while (contentsEnum.hasMore()){
NameClassPair ncp = (NameClassPair) contentsEnum.next();
String userName = ncp.getName();
System.out.println("User: "+userName);
try{
System.out.println("am here....1");
Attributes attrs = ctx.getAttributes(userName, attributeNames); // only asked for one attribute so only one should be returned
System.out.println("am here....2");
Attribute groupsAttribute = attrs.get(attributeNames[0]); // memberOf
System.out.println("-----"+groupsAttribute.size());
if (groupsAttribute != null){
// memberOf is a multi valued attribute
for (int i=0; i<groupsAttribute.size(); i++){
// print out each group that user belongs to
System.out.println("MemberOf: "+groupsAttribute.get(i));
}catch(NamingException ne){
// ignore for now
System.err.println("Problem encountered....0000:" + ne);
//get all the groups list
} catch (NamingException e) {
System.err.println("Problem encountered 1111:" + e);
=================
The following exception gets thrown at every user entry:
User: CN=Administrator
am here....1
Problem encountered....0000:javax.naming.NamingException: [LDAP: error code 1 -
000020D6: SvcErr: DSID-03100690, problem 5012 (DIR_ERROR), data 0
]; remaining name 'CN=Administrator'
I think it gets thrown at this line in the code:
Attributes attrs = ctx.getAttributes(userName, attributeNames);
Any idea how to overcome this and where am I wrong?
Thanks in advance,
Regards.In this sentence:
Attributes attrs = ctx.getAttributes(userName, attributeNames); // only asked for one attribute so only one should
It seems Ok when I add "CN=Users,DC=filenetp8,DC=com" after userName, just as
userName + ",CN=Users,DC=filenetp8,DC=com"
But I still have some problem with it.
Hope it will be useful for you. -
How can i get list of all monitors and rules that assigned to a node ?
Hello,
We r using the scom 2012 sp1
i need to get list of monitors and rules that have assigned to nodes.
for example :
nodename - type - name
node1 - monitor - montiorname1
node1 - monitor - monitorname2
node1 - rule - rule1
node1 - rule - rule2
can i get this list by using sql or powershell script ?
thanksHi,
Please refer to the link below:
How to View All Rules and Monitors Running on an Agent-Managed Computer
https://technet.microsoft.com/en-us/library/hh212748.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
List of project members and business process owners
Hi Experts,
Can any one tell me where we can view list of Business Process Owners and list of Project members who are involved in a particular project.
I know that we can view list of team member in authorisation view. is there any other view to view list all member who are all involved in a particulat project.
Regards
Sasikanth.ChTry this
IGPProcessInstance process = ... ;
IGPBlock processTemlate = (IGPBlock) process.getTemplate() ;;
for (int i = 0, len = processTemlate.getRoleInfoCount(); i < len; i++)
IGPRoleInfo roleInfo = processTemlate.getRoleInfo(i) ;
String techName = roleInfo.getRoleName() ;
Enumeration userEnum = process.getUsersForRole(techName) ;
//store users to some global collection or your table (IUser) -
Hello.
MY DVD is a combine software for Adobe Photoshop Elements 11 and Adobe Premier Elements 11. I can not see the Adobe Premier Elements 11 listed in my ALL Programs. I have started to edit some of my photos with the Photoshop software and so far all going all right . But today wanting to give a go to the video editing I found that the software does not allow me to do it. I am using my new HP Envy laptop that I recently bought with the idea of learning to edit my home videos.
Any help will be most appreciated,zoraidaq
What computer operating system?
Please excuse the question, but I do not want to take anything for granted. Did you install Adobe Premiere Elements 11? It is a separate install.
If you did.....
Assuming Windows 7, 8, or 8.1 64 bit for now, when you go to Control Panel/Programs is Adobe Premiere Elements 11 listed there?
And...
If you go to
Local Disc C
Program Files
Adobe
Adobe Premiere Elements 11
do you find a file in the Adobe Premiere Elements 11 Folder named Adobe Premiere Elements.exe? If so, please double click that. Does
Premiere Elements 11 open to the workspace bypassing the Welcome Screen?
What happens if you insert the Adobe Photoshop Elements 11 Adobe Premiere Elements11 installation disc in the burner tray, select Adobe Premiere Elements
11 for installation? Does the installation proceed or are you meet with a process which wants to uninstall rather than install?
Please review and consider. Then based on your answers, we can decide what next.
Thank you.
ATR -
Safari 5.1 - Clicking on pull down list reloads all windows and tabs
Clicking on a <select> tag option on my website has the effect of reloading every windows and tab there is currently open. It worked fine on Safari 5.0 and works fine on other browsers. Happens on two different computers, yet it does not happen with every pull down list, only with the ones that have the grey line before the arrows.
Example:
http://festhome.com/festhome_cake/registro
Clicking on the year, country, whatever, they all reload everything on the browser.
Thanks for any help...When you apply certain styles to a select tag, Safari switches to a "design-friendly" dropdown control without any Aqua styling. That's what you're seeing when you get the "gray line" before the arrows.
So far, I've determined that going into the Web Inspector and removing styles until Safari uses the default Aqua control fixes the problem.
But, if I build a test page from scratch, and it has a "design-friendly" select it works fine. So, there's some combination of things at work here. The "design-friendly" control certainly seems to be the linchpin, though.
I can't spend any more time on it at work today, but I might futz with it some more tonight. -
Getting a list of all table and index names
Hi,
I have just create a set of tables and indexs, but I have misspelt on of the table names and am now trying to find out what it is. I am using sql*plus as a command line interface but can only find desc as a way of finding any data on a table. What is the command to list all the tables within a table space?
Cheers
SimonHi,
there are almost always three ways to find things in Oracle's dictionary :
USER_xxx = thing that you own
ALL_xxx = thing that you own and have access to
DBA_xxx = all things in hole database
If you want to find tables/indexes that you own :
SELECT table_name FROM user_tables
WHERE tablespace_name = 'APP_TBS';
SELECT index_name FROM user_indexes
WHERE tablespace_name = 'APP_TBS';
/Uffe
Maybe you are looking for
-
Filter the Regarding field on Activity
Can we use addCustomFilter method on Regarding control on Activity form? I would like to filter the cases listed under Regarding field based on the role of logged in user. Regards, Yogesh
-
Database Access delays-how to improve upon that?
Hi friends, I have this simple class,which takes in query and returns the results.I don't know why the database access is so slow,and if i try to add my driver load statements into the constructor the java class starts throwing "null pointer exceptio
-
JAX-RPC 9.0.4 --- Data Types Supported
Hi, does any body know is java.util.List is a supported Datatype on OC4j 9.0.4.2 for JAX-RPC. Cheers Gaurav
-
I update restore it clearly say unlock on iTunes but not giving me no network
-
My iTunes album discovery widget does not work properly.
Hi, I wanted to use the iTunes album discovery widget from apple.com for my website to promote a new release of mine. While the widget will take you to my iTunes page when you click on view, it will not play audio when one presses play on the song s