List of all historical meetings and attendants - resource mailbox exchange 2010 sp3

Hi,
I'm an exchange admin, and i'm looking for a PS script of some sort to get a list of all the meetings held in a resource mailbox and its attendants.
ie: meeting room 1 -> get a list of all the meetings held there and the attendants for a period of 3 months.
Is there anybody who has experience with this ?
(Exchange 2010 sp3)u

Hi,
I recommend that you post this in Script Forum,there are more Powershell experts to help you:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=scripting
Thanks.
Niko Cheng
TechNet Community Support

Similar Messages

List of all historical meetings and attendants

Hi,
I'm an exchange admin, and i'm looking for a PS script of some sort to get a list of all the meetings held in a resource mailbox and its attendants.
ie: meeting room 1 -> get a list of all the meetings held there and the attendants for a period of 3 months.
Is there anybody who has experience with this ?
(Exchange 2010 sp3)

Hi,
I recommend that you post this in Script Forum,there are more Powershell experts to help you:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=scripting
Thanks.
Niko Cheng
TechNet Community Support

Need a list of all services, processes and servers

Hi experts,
i'm totally new to this but i need a list of all services, processes and servers. Is there a easy way to get them?
I try to create a tool where you are able to virtually shutdown servers and then you can see what happends to the services and processes. Hope someone can help me.
Thanks
btw - sorry for my english

i'm not sure if you all understand what i'm trying to do so i'll ty to explain it
first i'll try to explain how i understand SOA
- there are several servers on which the services run
- a service is only runnable if his server is active
- a process consists of several services
- if one of these services isn't runnable anymore the whole process isn't runnable too
- there are user who use one or more processes
- if one of the used processes is not able to run the user will be affected
the tool i'm trying to write should automatically import the descriped information (server-, service-, process- and userlists) from a given SAP-Systemand then you can switch virtually a server to see which services, processes and user would be affected.
This would be fine if you want to shut down a server for maintance work or something like that.
so i hope you understand my problem and you are able to help me
again i want to excuse for my english and my wimpy knowledge about the SOA Architecture of SAP

HT203167 Computer crashed and lost all music. How can I get a listing of all prior purchases and get them downloaded again?

Compaq computer crashed and lost all music that was on the computer. How would I go about getting a listing of all purchased items and download them again? I know when i first got set up it said I could download up to 2 times when purchased and I have only downloaded once. But need a listing of songs as well.

One thing that I also recommend in the future is to back your iTunes library up relatively regularly. You can get your purchases in the cloud just fine, typically, but at the very least, it will save some time by backing it up.

SME 7.1 not working with Exchange 2010 SP3 UR8v2 and OnTap 8.2.3 7mode

Followed IMT and installed software that NetApp said would work.Ontap 8.2.3 7-modevmWare 5.0 SP3Microsoft Windows Server 2008 R2 SP1Exchange 2010 SP3 UR8v2NetApp Host Tools 6.0.2SnapDrive 7.1.1SME 7.1 Everything connects fine. SnapDrive sees my drives. SME connects to Exchange Server. However in the process of configuring SME, I get the following error. I have followed knowledge base article and increased the timeout of DFM connection in registry, but that has not solved the problem. Has anyone run into this before? SME 6.1 works fine, but is not compatible with SnapDrive 7.1.1 (causes verifications to fail because server can't mount clone) and lower SnapDrive versions are not compatible with Ontap 8.2.3. I am in a real bind here. Thanks in advance.

the following configuration for SME 7.1 is no longer supported: Windows Server 2008 R2Exchange 2010 SP3 RU1 – RU5WMF/PowerShell 3.0SME 7.1 The supported configuration will now be: Windows Server 2008 R2Exchange 2010 SP3 RU5WMF/PowerShell 4.0SME 7.1 this is because Microsoft does not support WMF 3.0 on Server 2008 R2 running Exchange 2010 SP3, with any RU version.SME 7.1 requires a minimum of PowerShell 3.0 (part of WMF 3.0) in order to run. Feel free to review the Exchange Server Supportability Matrix located here: https://technet.microsoft.com/en-us/library/ff728623%28v=exchg.150%29.aspx. All existing documentation (ISG, Admin Guide, IMT) will be updated shortly to reflect this change in requirements. hope that helps,Domenico.

Exchange 2010 SP3 - How many Calendar Items/Folders can you create under "all public folder"

Hi,
Is there a limitation on how many calendar items/folders you can create under "all public folder" in Exchange 2010 SP3?
Thank you

I don't believe you can create calendar items under the root folder, but it's been so long since I worked with a system that had public folders that I'm not sure. If you mean "a folder that can contain calendar items", that is not a calendar
item itself.
Now, I believe your underlying question is, "How many folders can be created at the root level of the public folder hierarchy?" If so, there is no simple limit that I know of (you can have thousands, if you really want), but management gets
pretty unruly with the more that you have. I normally recommend that you create sub-folders to logically meet your requirements, then have each of these with more folders (normally that only specific groups of users will be able to access or add items
to). And anyone will tell you that you want to restrict anyone from creating their own folders at the root level. In fact, this is the default setting for a new Exchange 2010 installation.
I'll add that you really should stop trying to use public folders, since there are newer technologies (SharePoint, for instance) that work much better and are much easier to use.

Exchange 2010 SP3 and UR6 Query - Order of Install

hi,
I need to update my Exchange 2010 SP2 Servers to SP3 and Update Rollup 6.
Can someone confirm the update order for me?
I have 5 servers;
Live Data Centre:
2 x HUB / CAB (Using Windows NLB)
2 x Mailbox (DAG)
Disaster Recovery:
1 x Multi-Role Server (CAS / HUB and Mailbox) - this is also Part of the DAG
Two Questions:
1.) What is the Order in which I install SP3 on these Servers? Should it be Live Data Centre: HUB / CAS, Mailbox Servers and THEN the Multi-Role Server at DR?
2.) When Upgrading each server, should I do SP3, reboot, check and THEN install Update Rollup 6 - or should I upgrade all Servers to SP3 and then start the process again to get to Update Rollup 6?
Thanks in advance for your help with this query.
Regards,
Adam

1) Internet facing CAS first in each AD site. Order: CAS> HUB> UM> MBX
2) Personally, I would install SP3, reboot, then install SP6, but its really up to you.
http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx
Upgrade Exchange 2010 to Exchange 2010 SP1, Exchange 2010 SP2, or Exchange 2010 SP3
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Exchange 2010 SP3 Rollup 8 and Rollup 7

Hi
I have a customer with a Small Business Server 2010 with Exchange 2010 SP3.
The Customer installed updates on the server 10/12/2014 where Rollup 8 for Exchange was included.
After that the Customer has a lot of problems with connection from Outlook to Exchange and they phoned us.
We have looked on the problem and found a Microsoft article about rollup 8 where they said DO NOT INSTALL
We ran Windows Update again on the 13/12/2014 where Rollup 7 was installed
The customers still has problems with connection from Outlook.
One of the errors:
From: Systemadministrator
Sent: 15. december 2014 10:54
Subject: Unable to be delivered: Test
This message did not reach one or all of the recipients.
      Subject:     Test
      Sent:15-12-2014 10:54
Unable to deliver to the following recipient(s):
      MST the 15-12-2014 10:54
            This message could not be sent. Try to send the message again later, or contact the networkadministrator. Error [0x80004005-00000000-00000000].
Another error in Application log:
Log Name:      Application
Source:        MSExchange Common
Date:          16-12-2014 08:09:00
Event ID:      4999
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      <servername>.<domain>.local
Description:
Watson report about to be sent for process id: 9340, with parameters: E12, c-RTL-AMD64, 14.03.0224.001, M.E.RpcClientAccess.Service, M.E.RpcClientAccess.Handler, M.E.R.H.ViewCache.IsRowWithinUnreadCache, System.IndexOutOfRangeException, 8e38, 14.03.0224.001.
ErrorReportingEnabled: False
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSExchange Common" />
    <EventID Qualifiers="16388">4999</EventID>
    <Level>2</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-12-16T07:09:00.000000000Z" />
    <EventRecordID>174679</EventRecordID>
    <Channel>Application</Channel>
    <Computer><servername>.<domain>.local</Computer>
    <Security />
</System>
<EventData>
    <Data>9340</Data>
    <Data>E12</Data>
    <Data>c-RTL-AMD64</Data>
    <Data>14.03.0224.001</Data>
    <Data>M.E.RpcClientAccess.Service</Data>
    <Data>M.E.RpcClientAccess.Handler</Data>
    <Data>M.E.R.H.ViewCache.IsRowWithinUnreadCache</Data>
    <Data>System.IndexOutOfRangeException</Data>
    <Data>8e38</Data>
    <Data>14.03.0224.001</Data>
    <Data>False</Data>
    <Data>
    </Data>
</EventData>
</Event>
What to do ?
Best Regards
John B

Hi John,
Please type
outlook /safe in RUN to start Outlook in safe mode and then check if this issue still exists. Meanwhile, please run Exchange Best Practices Analyzer and check if find relevant issues.
à
This message could not be sent. Try to send the message again later, or contact the networkadministrator.
Error [0x80004005-00000000-00000000].
The issue typically occurs if send messages to a large number of recipients.
When this issue occurred, did you check if send message successfully via OWA?
à
We have looked on the problem and found a Microsoft article about rollup 8 where they said DO NOT INSTALL
Did you mean this article:
Exchange releases: December 2014?
à
We ran Windows Update again on the 13/12/2014 where Rollup 7 was installed
From the Event ID 4999, I noticed that point to
14.03.0224.001, it should mean the old Exchange Server 2010 SP3 Update Rollup 8. From above
mentioned article (Exchange releases: December 2014),
Exchange Server 2010 SP3 Update Rollup 8 has been re-released to the Microsoft download center resolving a regression discovered in the initial release. The update RU8 package
corrects the issue which impacted users connecting to Exchange from Outlook. The updated RU8 package is version number 14.03.0224.002. Just a confirmation, did you
reinstall that re-released Exchange Server 2010 SP3 Update Rollup 8? Any difference?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Outlook 2010 and Exchange 2010 SP3

Hello,
we are planning to upgrade from Exchange 2010 sp1 to SP3, most of client PCs has Windows XP sp3 and Oultook 2010 with VSTO addins working with mapi properties.
I need to know if there are any known issues between this client environment and Exchange 2010 SP3 ??
thanks a lot,
Mauricio.
Mauricio

Windows XP is not supported in any scenario, so yes, I'd call that a known issue.
Mike Crowley | MVP
My Blog --
Planet Technologies

Exchange 2010 SP3 and meeting forward notification options

I'm having an issue with meeting forward notifications in Exchange 2010 SP3. I'm working on an integration project with an existing system using the EWS Managed API. Part of this system is handling forward notifications and responses. However, we've hit
an issue regarding the way forwards are generated by Exchange.
In short, when a meeting request is forwarded to an external address (could be an Exchange server outside of our domain, gmail, or anything, really), the notification they receive places the meeting owner in the "sent representing" field, not the
person who actually sent the forward. As a result, any responses from the forward recipient will go directly back to the organizer, and the user who forwarded the request may not even be visible. We do not want this to happen. We'd prefer that the forward
show the person who actually sent it as the sender, and as a result, the response should go directly back to them, not the organizer.
Is this possible, either through settings or flags on the Appointment object itself or through some additional configuration options in Exchange? Installing a third-party transport agent (even one that we write) is probably out of the question.

What if you "Forward as iCalendar"
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on www.exchangequery.com

Opportunistic TLS between our Exchange 2010 SP3 on Premise (WIth Edge) and Exchange Online Protection.

Hi,
We would like to configure Opportunistic TLS between our Exchange 2010 SP3 On Premise Systems (with Edge) and EOP.
I can see that Opportunist TLS is enabled on both the send and receive connectors in EOP. SO I think no change required here.
The On premise Send Connector (Configured by EdgeSync) does not have the option for Opportunistic TLS. Under "Configure Smart Host Authentication Settings" it is currently set to "None". I have the option for "Basic Authentication
over TLS" but this requires a Username and Password. No option for Opportunistic TLS. When I look at the properties of the send connector (get-sendconnector "sendconnector_name" | fl) I
can see that the IgnoreSTARTTLS parameter is set to FALSE - so I think that means it is enabled. So I think no changes required here- right?
The receive connector on the Edge Server has the TLS option on the Authentication tab - so I guess I just check that option right?
The Edge servers also run TMG and the two are integrated. I don't think this changes anything but thought I would include it in case it does.
Anything I have missed?
Thanks very much.
Geoff
ilmuro69

Hi,
We would like to configure Opportunistic TLS between our Exchange 2010 SP3 On Premise Systems (with Edge) and EOP.
I can see that Opportunist TLS is enabled on both the send and receive connectors in EOP. SO I think no change required here.
The On premise Send Connector (Configured by EdgeSync) does not have the option for Opportunistic TLS. Under "Configure Smart Host Authentication Settings" it is currently set to "None". I have the option for "Basic Authentication
over TLS" but this requires a Username and Password. No option for Opportunistic TLS. When I look at the properties of the send connector (get-sendconnector "sendconnector_name" | fl) I
can see that the IgnoreSTARTTLS parameter is set to FALSE - so I think that means it is enabled. So I think no changes required here- right?
The receive connector on the Edge Server has the TLS option on the Authentication tab - so I guess I just check that option right?
The Edge servers also run TMG and the two are integrated. I don't think this changes anything but thought I would include it in case it does.
Anything I have missed?
Thanks very much.
Geoff
ilmuro69

Real-world experience with Exchange 2010 SP3 RU5+ and Powershell 4?

The support-ability matrix for Exchange (http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx) says Exchange
2010 SP3 RU5+ and Powershell 4 are compatible. But, there is very little actual discussion about how well that works.
I use Powershell extensively for mission critical and somewhat complex processes, with Exchange 2010 on 2008 R2 and AD access/reads/updates.
Can I get a summary of the caveats and benefits from someone who has actually done this in a
real-world/production scenario (more than one server, managing from a separate non-Exchange server), and who has scripting experience with this configuration?
Also, how has this affected EMC operations?
As always thank you in advance!

I believe the matrix states that its supported to install Exchange into an environment where __ version of WMF is present. Exchange 2010, launched from a Win 2012 server, reports version 2.0 when you call $host. For example, calling the ActiveDirectory
module from EMS on an Win 2012 server (ps 3.0) fails.
I'll double check the extent of this scenario and get back to you.
Mike Crowley | MVP
My Blog --
Planet Technologies

Current list of all SAP modules and sub-modules

Can anyone point me to a current and comprehensive list of all available SAP modules and sub-modules? Currently, the best source I have found for this list is SAPNote 36677, which lists all the structure of components for customer incidents. However, this SAPNote list is over 23K line items and includes information outside of the modules and sub-modules, in a format that is difficult to normalize.

Eric,
a similar question was posted in this link: http://scn.sap.com/thread/3652322
Assuming you are looking for an overview on the modules for the SAP Business Suite, personally I like the list in the SAP help
Also a valuable resource is the SAP Release Strategy webpage, which provides link to the Solution Explorer, which shows the available modules by LoB Line of Business or Industry solution, and the official Product List called PAM Product Availability Matrix, which is pretty technical.
thank you
erich

Can I get a list of all binary files and what they do?

I'm a newbie to Oracle. Needless to say I'm blindly muddling my way through the experiance of installations/setup and managing my first database. I realize that there is a three tier system and for my system all three of the tiers are on the same pc! In short I need help with what executables do what. I've tried going through Linux howto's, online docs, and even bought a book on the subject but the book seems to stroke the benifits of using Oracle instead of actually telling me how to use Oracle. I'm using Oracle8i 8.1.7 EE (enterprise edition) on Linux RH 7.0. I would like a link to a list or the actuall list of all the binary files in $OracleHOME/bin/ and what each of them do. Also important log files I should consult regularly would be most helpfull. Thanks.

While you're at it, see if you can get a complete description of all the X$ tables.

I upgraded to ios 7.1 and even after i updated to this version in the calendar view i could get a list of all of appointments and now i have half screen of calendar and then appointments is their any way to go full screen of appointmetns

I upgraded to ios 7.1 and even after i updated to this new version in the calendar view i could get a list of all appointments and now i have done something and i get a half scrren of calendar and half screen of appointments. is their anyway to get full screen of appointments with the 7.1 version

Tap on any give date in the monthly view and you will be taken a list of event, the default position being the date you tapped.
The icon just to the left of the search icon provides a master list view of events.
http://help.apple.com/iphone/7/#/iph3d110f84

List of all historical meetings and attendants - resource mailbox exchange 2010 sp3

Similar Messages

Maybe you are looking for