List of all KBA concerning Software Logistics

Hello,
I have noticed that some people published a list of top KBA
like here : NW System Upgrade Top KBAs and Recently Added/Updated KBAs and SAP Notes
It is difficult to search KBA only with service.sap.com/notes and the only way to me
to find new KBA is to watch each month top KBA
I would like to know if there is a page with an index of KBA (all or by category) ?
I have read these articles but i have also difficulties :
2081285 - How to enter good search terms to an SAP search?
1540080 - How to search for KBs, KBAs, SAP Notes, product documentation, and SCN
Thank you to make SAP more simpler.

Hi Marc.
Currently there is no such list bar the top ten list you have found, The best method would be that you refine your search by the Application Area field in the Note Search. That will return all results for all notes in a component area which alligns with how notes and incidients are clasified, e.g if you wished to locate only notes related to Language Import you would search for notes in the application area BC-CTS-LAN.
Once you have your component area choosen you should then choose "Configure" under the Search Result field. Here you can choose to have your results sorted by Note Number. In addition you should increase you results to 50 per page.
You can then download the search results as a CSV and import into Microsoft Excel or similar to build Component specific note lists such as for UPG, Transport etc.
I hope this helps.
Many Thanks
Neil Ryan
SAP Active Global Support.

Similar Messages

  • HT1925 I was trying to make sure that all my Apple software was uninstalled, and I still can't remove C:\Program Files\iPod\.  I went to the Task Manager and it is not listed in the Processes tab.  What do I do now?

    I was trying to make sure that all my Apple software was uninstalled, and I still can't remove C:\Program Files\iPod\.  I went to the Task Manager and it is not listed in the Processes tab.  What do I do now?

    Are you looking for iPodService.exe?
    Might be better to run services.msc from the run dialog and shut down the service polietly.
    tt2

  • How can I get a list of all channels of a device?

    I'm writing a software for use in a couple of our labs to be run as an executable i.e. without LabView being installed on all machines.
    Now there's also a couple of different daq hardwares in use. So I planned to have a config tool where the user can choose the appropriate - physical, not virtual - daq devices and channels like: temperature 1 measured by device 1, analog input 2.
    Therefore I'd need a list of all available daq devices (which is somewhat possible) together with a list of all channels of a particular device. Is there any way to get this?
    Unfortunately I don't want to use virtual channels since I don't want to bother the user with configuring them and btw I don't know if virtual channels work wit
    h the pure run-time module of an executable.
    Thanks!
    Daniel

    Hello Daniel,
    You can use virtual channels with executables and there is actually a way to transfer the virtual channel configurations to the target computers so your users would never need to mess with configuring virtual channels. Once you have configured virtual channels, you can save the configuration within a .daq file. You can then include that .daq file as a support file of the executable and programmatically set the configuration of the target machine. The linked document below illustrates how to accomplish this.
    How Do I Port a DAQ Configuration File With an Executable?
    http://digital.ni.com/public.nsf/websearch/CB83B101E19EF83086256A3E0054206C
    If you do not want to use virtual channels, the only other thing I can think of is to use the Get_D
    AQ_Device_Info VI or function call. You can get a device code when using this VI or call and each code is associated with a specific instrument. You would then have to know (use the device's user manual) to determine how many channels the corresponding device has. Without virtual channels, you would have to use a channel number (0,1,2,...etc) and would not be able to use a string ("temperature 1 measured by device 1").
    So, I think using virtual channels and transferring the .daq file to the target machines with the executable will be the best option. I hope this helps.
    Regards,
    Todd D.
    NI Applications Engineer

  • I resently cracked my screen on my iPhone 4 and had to get a new one... Whe backed the old phone up it didn't save my old apps and now I no longer have that phone...  How can I recover a list of all my apps?

    I resently cracked the screen on my iPhone 4 and had to get a new one... When i backed the old phone up it didn't save my old apps and now I no longer have that phone...  How can I recover a list of all my apps?

    Backup does not include apps,music,vids,etc
    Backing up, updating, and restoring iPad, iPod touch, and iPhone software
    You can loo up your purchases in your purchase history ( in your account in itunes)  and unlike music, you can redownload apps.
    How to redownload purchased apps from the App Store

  • How can I print a list of all folders/directories on my MacBook Pro?

    I need to print a list of all directories on my MacBook Pro.  Is there a way to do this already on my Mac, or can anyone recommend the best software to do this?

    And if you pipe the result of Charlie's suggestion to a file, you have it printed out:
    in the Terminal you enter following command first:
    cd <enter>
    now you are in the root folder ... and then:
    sudo ls -R */ | grep '/$' | cat > ~/Desktop/folders.txt <enter>
    to explain:
    certain folders are only readable by the administrator. That means, we precede this command by sudo; you have to enter your password
    ls means list, the switch -R means recursive
    | means pipe the command to an other command and grep is taking only the entries finishing with a / (that means folders only, not the files
    then we | pipe everything to the command cat, which puts the found folders into a file on the desktop ...
    hope this helps

  • My iMac holds my main iTunes account.  How do I find out a list of all the devices that are authorized from this computer?

    My iMac holds my main iTunes account and it shows 4 devices are authorized to play iTunes.  I can only name 3.  How do I find out a list of all the devices that are authorized from this computer?

    I don't believe this is possible, but you can deauthorize all your computers and start over if you are concerned.
    See here
    Best of luck

  • How to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

    how to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

    Hi bluegrandpanash,
    Thanks for visiting Apple Support Communities.
    If you backed up your iPhone to iCloud before updating the software, first try the steps under "Restore from an iCloud backup" in this article to recover your data:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Best Regards,
    Jeremy

  • Apps no longer listed under "all" tab for purchased apps

    This is for an iphone 4 with IOS 5.
    On my iphone when I go to the app store, updates, and then select "purchased", the apps listed under "all" are the same as the apps listed under "not on this iphone." The apps are on the phone, under app discriptions they are listed as installed, and under my itunes store account on my computer they are shown as installed. Anyone have any ideas why this would be?
    I know when it changed: I bought an app for 4 bucks that did not work when it installed. I reported the problem and got a response that they were investigating it. A day later an IOS 5 update came through and fixed the program. I wrote an informed apple that it was fixed and that I did not need the refund. Got a reply saying great and that they were happy I was satisfied. The next day I got another email from apple stating I was credited for the purchase. I informed them that I already informed them that I did not need the credit and they said that they cannot reverse the credit, but I can download the app again. I did this and the install stated I would not be charged as it was previously downloaded. Could this have messed things up?
    Ken

    I did a restore through itunes last night. At first the apps were listed under downloaded apps. Four apps did not get returned back to the iphone as it stated the software could not be found. When I returned them to the phone though icloud the apps disappeared from the "All" catagory, being replaced by the "not on this phone" list once again.
    Anyone have any ideas?

  • Is there any way to have a COMPLETE list of all samples and loops ( Logic 8

    I'm sure it's been posted previously, but anyway, I'm looking to buy new Apple Loops libraries and I have faced the fact , that many of the sounds and loops produced by third parties manufacturers have been already included in Logic installation discs.
    I have a list of Apple Loops DVD's that have been included with Logic somewhere, the problem is, Apple didn't post ( I believe) the credits of all 3rd party manufacturers that have produced these libraries that are included with Logic or Garage band. Is there any way to have a COMPLETE list of all samples and loops that are included with Apple DAW's so I wouldn't duplicate anything ? I'm pretty much positive that Apple had other companies to sound design and sample all libraries for them, so is there also a way to have a list of those manufacturers? Again, the objection is to start upgrading the sound library without any possible duplication?
    Thanks in advance!

    Chris, I certainly don't mind additional questions and postings.
    I believe there are many issues with Apple Loops and Logic that need to be resolved and people need to be aware of that. Unfortunately, in opposite to the old "german" version of Logic , there's no lifetime tech support, you can't even call and ask the question after 60 days , which isn't right for a professional software of this level, especially considering the fact that many things still remain vague in Logic even for developers and tech support people!( believe me, I've called and asked!)
    Issues like that need to be resolved over the phone with the company, period!
    One thing I also learned over the years as a Mac OSX user, if something doesn't work, don't mess with it. Delete your drive and re-install everything. This is very frustrating , I know, but unfortunately this is the only way to deal with OSX issues, if you got a problem with your system, don't try to fix it. It's never gonna be the same again. I know , it's off the topic a little bit, but if your content is missing from the system files, before installing your new Logic, back up your important files, wipe up your drive and clean install Mac OSX , run updates and then install the Logic. Most likely , everything will be in it's place, at least 90% or more. I gave up trying to make two system in my house to be compatible 100% , but it's OK if they're 90% or more identical. I spent enormous amount of time trying to find out what's missing and where, I visited most of the forums and there's no clean answer.
    Message was edited by: Moderator

  • I need a list of all the organizational units, sub organizational units,

    I need a list of all the organizational units, sub organizational
    units,and their security groups which are present in all sub OUs

    Hi,
    There are lots of way to export OU, Sub OU and Security Group.
    1> Open AD console > run query > export with CSV file.
    2> Run “CSVD” command as per your requirement.
    3>Download Manage Engine Software > Install to any computer of Domain member > Set credential for domain controller access > Export the customized information, as per your requirement with XLS, PDF,
    CSV or Ect.
    3rd option is very easy to export customized reports
    Deepak Kotian.
    MCP, MCTS, MCITP Exchange 2010 Ent. Administrator
    Disclaimer:
    Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognizes useful contributions. Thanks!
    All the opinions expressed here is mine. This posting is provided "AS IS"
    with no warranties or guarantees and confers no right

  • List of all Weblogic server version compatible with Oracle BPEL 10.1.3.x

    Hi all,
    Kindly let me know all the web logic server versions compatible with 10.1.3.x.
    I know that WLS 9.2 works fine as i have already installed SOA Suite 10.1.3.4 with WLS 9.2 MP3.
    But I am not sure bout the rest of the versions of WLS.
    i need en exhaustive list of all the versions of WLS compatible with SOA Suite or standalone BPEL having versions - 10.1.3.3 or 10.1.3.4.

    Hi Vishal,
    11g Certification Matrix on OTN
    http://www.oracle.com/technology/software/products/ias/files/oracle%20fusion%20middleware%2011gr1%20(11%201%201%201%200)%20certification%20matrix.xls
    10.1.3.4
    http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_r3_10.1.3_matrix.xls
    10.1.3.3
    http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_r3_10.1.3_matrix.xls

  • Problem installing Photosmart C6180 All-In-One software

    I've "googled" and found several similar installation issues but none quite match mine.   When I attempt to install the All-In-One software, I receive a dialog box error "The system cannot find the file specified."   The file that it is attempting to find is found in the Dialog window heading:
    c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksys...
    Using %temp% I am able to verify that the 7zS52C3 folder structure exists.  However the ",sourcepath.setup" folder shown above is incorrect.  it should be just "setup".  
    I've ran this install several times under  different accounts, including creating a new admin account.
    I've cleared all temp files, removed tsr files using msconfig as described and cannot seem to solve this issue.  I even renamed the setup folder to ",sourcepath.setup" to see if this would solve the install but it failed on another file.
    I am running Windows Professional x64,  My HP Photosmart c6180 is connected to the network and I am able to print properly to it from my computer.  I need the software primarily for "scanning to computer" functionality.
    Any help is appreciated.

    Hello @DirkPittP,
    Welcome to the HP Support Forums!
    I understand that when installing your HP Photosmart C6180 All-in-One Printer on your Windows 7 64 bit computer, you are encountering a 'c:\users\Myusername\AppData\Local\Temp\7zS52C3\,so​urcepath.setup\blocksysinstall.exe The system cannot find the file specified' error. I would like to assist you with this issue today.
    Now in your original post, I can see that you have already attempted installing the printer on administrator accounts, clearing the temp files, running an msconfig, and renaming the folder to no avail. At this time I would like you run the following steps to see if we can get this working for you.
    Step 1: Uninstall Drivers:
    First, I would like you to clean up your system of any software or drivers for your HP Photosmart that may have made their way onto your system during the failed installs. Rather than running the 'normal' uninstall process, I would like you to click here to download the Microsoft Uninstaller Tool.
    Once the website opens, please select the Run now button on the right hand side. Please follow through any recommended fix steps provided. When prompted, choose that you need assistance with 'uninstalling'. You will be brought to a list of populated programs from your computer. Scroll through this list until you see your HP Photosmart. Select your HP Photosmart and allow it to uninstall.
    This Microsoft Tool will also check your computer for any registry corruptions. Should any system corruptions be found, this Microsoft Tool will fix those corruptions for you.
    Once the uninstall has completed, please close the Microsoft Tool and proceed to the next step.
    Step 2: Clear the Temp Files:
    Click on your Start menu
    In the 'search programs and files' box type %temp% and hit enter
    In the Temp folder select Ctrl + A at the same time on your keyboard to highlight everything
    Select the 'delete' button on your keyboard. If you get a pop up to skip an item, just skip it.
    Once the Temp folder is emptied, close the window
    Right click on your Recycling Bin and select Empty Recycling Bin
    Step 3: Download Drivers:
    Please click here to download the latest drivers for your printer.
    Once the website opens select the Download button on the top left
    Allow the download to Run
    Once the download has completed the installer will automatically extract
    After the extraction if you get the error again for 'blocksysuserinstall.exe' take note of the temp folder 7z . . .  number sequence it refers to this time around.
    Step 4: Rename Temp 7z Installer package:
    Click on your Start menu
    In the 'search programs and files' box type %temp% and hit enter
    In the Temp folder locate the 7z . . . folder that shows in there
    Right click on the 7z folder and left click on 'rename'
    Rename the folder to the 7z. . . to the name that the 'blocksysuserinstall.exe' points to
    NOTE:  Ensure that you are logged into the same User Account that the error points to: "c:\users\Myusername\AppData . . . " when you make the change to the 7z folder. There shouldn't be any  'sourcepath.setup' folders at all.
    Step 5: Install Printer:
    Once the 7z folder is renamed to the name the error wants than click on the 7z folder to open it
    Scroll down to the bottom of the installer files
    Double click on the setup.exe file at the bottom. It may show an HP logo to the left of it
    An installer window should pop open
    Follow through the with the onscreen instructions to reinstall your printer
    Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!  
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • List of All Adobe Reader versions:

    Hi All,
    Can I get a list of all Adobe Reader versions; What I know is, the latest is Ver. 9.
    And I all discontinued support for All Version s that are below Version 9.

    Re: Pat Willener
    Many thanks for ur reply.
    Let me Introduce myself:
    I currently working on a 1 Month Prj. It's Called Sofware Baseline Management, The software base line refers to the oldest version of any operating system, software or service packs that software vendors still support.
    So I need to know all Adobe Reader versions that are no longer supported.
    This allows me to Compare all version of any operating system, software or service packs that are on my DSl And the ones running on user's machines.
    I am going to use this as an alert for my organisation.basically this is for Security issues to Machines still running old versions.
    Please for any Q's, Shout me.
    Thanks in Advance.

  • Hi, we have a G5 Blade server running OS X 10.5.8 with a dual Fibre Channel card. The OS does not read the card and cannot establish connection to the RAID controller. I have tried to move the card to another port with no luck. Ran all the updated softwar

    Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
    I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone advice

    Hi,
    Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
    The card should appear in the System Profiler under Fibre Channel and PCI Cards.
    All the best
    Beatle

  • IPhone calendar + List View All Calendars option (MobileMe)

    Hi all,
    I'm trying to fix a problem, which maybe there for some time already, in the iPhone Calendar. I'm using MobileMe to sync contacts and appointments. All my devices are up-to-date to the latest levels of firmware and software.
    I have a normal calendar in iCal and some subscribed calendars. Ther's no difference in both type of calendars.
    This is what's happening.....
    - Individual calendars are all looking perfect in List, Week and Month view.
    - All Calendar option is looking good in Week and Month view.
    - All Calendar option is bad in List view mode.
    When selecting the last option the Today date is changed a couple of days (Today = Wednesday 10-3), but also appointments are on different days. For example the soccer games on Saturday (6-3) and Sunday (7-3) are now changed to Tuesday (9-3) and Wednesday (10-3).
    I have the same calendar on my other iPhone and nothing weird going on over there?!?
    Does somebody have a clue?
    PS. The calendars for this (MobileMe) user are all correct on the other Apple devices.
    Thanks!
    Regards,
    Arjon G. Stelinga

    Hi All,
    Got a message from cini007, but I get an error message when I want to reply to that message. I have copied the "solution" below.
    I have tried this, but it's not working. The only thing happening is it has changed the dates randomly.
    Although I have been looking for the auto shut-off option. I can't find that option only in the alarm clock options?
    cini007 posted "Re: iPhone calendar + List View All Calendars option (MobileMe)" in "iPhone calendar + List View All Calendars option (MobileMe)" on Mar 9, 2010 8:20:57 AM.
    I had Genius Bar visit with same issue—no go (was advised to reset to factory settings).
    BUT here is the SOLUTION as it happened again:
    1. set auto shut-off to never
    2. turn OFF MobileMe syncing for calendars on the iPhone (from Settings menu)
    3. wait for calendar entries to be removed—takes minutes if you have several calendars
    4. hard reset iPhone (press Home and On/Off at the same time for >5 seconds), and wait 2 minutes (about the time to reboot)
    5. restart iPhone
    6. turn ON MobileMe syncing for calendars on the iPhone (again, from Settings menu)
    Message was edited by: Arjon Stellinga
    Message was edited by: Arjon Stellinga

Maybe you are looking for