List of all possible integration scenarios

Hi.Good Morning.Can anyone send me a list of all the possible Integrations Scenarios of XI ? A list of mostly used Integration Scenarios as well. Thank You. Gowtham..

Hi Gowtham,
This is just a demo flight scenario..
http://help.sap.com/saphelp_nw2004s/helpdata/en/1c/287842f9e03654e10000000a155106/frameset.htm
See this one too.. Nice one
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
All the best!
cheers,
Prashanth
P.S Please mark helpful answers

Similar Messages

List of all Excise Relevant Movement Types

Which All Movement Types need to be made Excise Relevant covering all Scenarios falling under CIN?
Can anyone provide list of all possible movement types need to be made Excise Relevant?

Just keep it in mind , When ever a stock which is excisable enters a Plant or leaves a plant excise need to get captured and Post.
So all movement types which allows the stock move in and out of the plant Excise has its impact. All internal movement like 201,262 etc wont have any impact on the excise.
This is the simple logic .

All possible alarms from Cisco VG 202, 204 and ISR G2 2900 Series Routers

Hello,
I am working on a project that involves integrating Cisco Voice Gateways and ISR G2 routers to our NetCool NMS. The project team wanted a list of all possible alarms that could be generated by these Voice Gateways and ISR 2900 series routers.
Does anyone know somewhere I can get a list of these alarms?

This issue is now resolved. Removing the codec entries under DSPFarm and replacing them fixed things. I'd done this in the past so I'm not sure why it worked this time around. Anyway, here's the final config section that is allowing video sessions to operate (loudest speaker mode) between three or more video phones:
saccavgw01#sh run | s dsp
voice-service dsp-reservation 0
dspfarm
dsp services dspfarm
dspfarm profile 1 conference video homogeneous
codec g729ar8
codec g722-64
codec g711ulaw
codec h264 cif frame-rate 30 bitrate 320kbps
maximum conference-participants 8
maximum sessions 8
associate application SCCP

Easiest way to sum all possible (different) combinations in an array?

Hey guys,
Say I have an array of sorted values (of attenuation), I want to generate an array of all possible sums of those values, sort it, then refer to it as a list of all possible attenuation values (lets say theyre bits on a discrete digital attenuator). I will try to show you an example of what I mean with letters:
Array of attens: [a, b, c, d]
I want an array like this: [a+b, a+c, a+d, a+b+c, a+b+d, a+c+d, b+c, b+d, b+c+d]... I hope I'm not missing any combos here...
I'm attaching my attempt at this idea but there's something missing I think, I am doing something wrong...
Thanks for any ideas or help.
Solved!
Go to Solution.
Attachments:
Sum all possible combos.vi ‏18 KB

Ben wrote:
The challenge is getting all possible combos.
Have you concidered looking at this as a variation on binary counting?
The total number of combinations is 2^(NumberOfSettings) if you include "None".
So generate a ramp from zero to the total number possible.
Convert each number to a boolean array and then use the boolean to determine if its corresponding value gets add into the total.
After processing all of the values from the ramp the final array should be in ascending order.
I hope that outline helps,
Ben
Ben, that is actually quite brilliantly simple. I like it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Is there a list of all Flash parameters?

Hello,
Does anyone know a website that has a list of all possible
Flash parameters to embed Flash?
example:
<param name="quality" value="high" />

don't embed the param called window if you're going to be
viewing on a mac, adobe and I tried for months to find a fix. The
larger the site with this param the slower it plays in fps on a
mac???
i had a client that had a 3 MB site he purchased and it had
rounded corners so we tried to use the transparent background. it
looked and worked great on pc but on mac it played at 1 fps not 30
like it was supposed to.
we, adobe tech support, and i tried and tried to figure out
what it was and it was the param name = window ... value =
transparent.
c

A List of all the JREs available

Hi,
Is there somewhere there is a list of all possible JREs available?
Thanks.

http://java.sun.com/products/archive/index.html as long as you're talking about Sun's JREs.

Is it possible to export a file from Organizer with the list of all the images in an album?

Is it possible to export a file from Organizer with a list of all the images in a certain album? In filling one of my albums I did not save my edited images to the same file... they are spread out a bit.... Now I want them to make a book with them (outside of Elements).

As far as I know, Elements does not have the ability to create lists.
The solution to your problem of making a book outside of Elements is to place all the desired photos in an Album and then select File->Export->As New Files which gives you the ability to make a copy of every photo in the album in a new folder, from which you would create your photobook.

Still print picking list when ALL items are blocked. Is this possible.

You know what warehouse people are like. When a delivery has all items blocked the picking list isn't printed, and the warehouse guys are wondering why nothing has printed. Of course a list is printed when there is at least one item that is not blocked on a picking list.
My question is whether it's possible to print the picking list when all items are blocked?. I would expect no items to be printed for picking, but at the bottom of the report I would expect to see a list of items blocked.
Anyone?.
Jason

HI
1.Kindly chekc the routine in the t code V/27
2.Against the routine against rthe condition type in the be.lwo path
      Logistics Execution
          Shipping
             Output Control
                  Output Determination
                     Maintain Output Determination for Outbound Deliveries
                            Maintain Output Determination Procedure
3.if it is in warehouse management then check in the tocde OMLV
REgards
Damu

How it's possible to receive programmatically list of all OS that Sun uses?

How it's possible to receive programmatically list of all OS that Sun uses?

That question does not really make sense to me. A given JDK or JRE will always be implemented for a given platform or operating system. So, that JDK or JRE will only 'know' of one platform/OS. (I doubt even that is true, it's simply implied by the fact that it is implemented for a specific platform).
If you want a list of supported operating system's, you would normally search for a page (such as the download area) here at java.sun.com.
- Saish

Customer specific codelists in integration scenario with CRM onPrem

Hi,
we are working on an integration scenario C4C <> CRM onPrem. The businesspartner masterdata should be editable in C4C and CRM.
We have several customer specific fields on the businesspartner in both systems.
In CRM we have implemented customizing for the values of these fields via customizingtables that can be maintained with TX:SM30.
We can also create finetuning-activities for the maintenance of the code lists for these fields in C4C.
As these customizingtables can have around 1.000 entries per table we are searching for a solution to maintain the values just in CRM instead of maintaining them twice.
Does anybody has an idea how to replicate customer specific codelist-values from CRM into C4C? Or maybe a valuehelp in C4C that retrieves the values via webservice from CRM?
Thanks
Danny

Hi Danny,
We have requirement like get all Oper Order based on Account from ECC to cloud and we have successfully achieved using External Web Service Integration.
We have consume ECC web service integration and retrieve all Open orders based on Account ID and display in the table.
So as per my knowledge you can read all value using web service call and maintained in custom OVS ( I have never tried ).
You need to check whether is it possible or not using custom OVS but if it is working for table than it may be work for custom OVS as well.
Please check this post below may be helpful to you
SAP Cloud SDK : Bi-directional Custom Web-service Integration with PI
Regards,
Mithun

Dependent Values read only or all possible values

Hello
I have read the following instructions.
[How to Configure Predefined Properties with Dependent Values (NW7.0)]|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b1ec90-0201-0010-6192-d3de721f8ae4?quicklink=index&overridelayout=true]
I need this scenario in the Portal search.
So my question is:
Is it possible, if Country is empty, that the field City is read only.
In the How to guide you can see , if no city is selected the property city is a text field(not Dropdown) and you can enter a sting.
Or it is possible, if no country is selected that the field city shows all possible cities, not restricted by countries.
For example no country is selected and the field city shows all cities.
or no country is selected and the field city is read only.
The html code of dropdown list country is
<option value="<empty>"><option value="Germany">Germany<option value="France">France
Value of no selection
<empty&gt = <empty>
If no country is selected the selected value is <empty&gt or <empty>.
I tried this:
"dependon=Country,*=allcities,Germany=GermanyCity,France=FrenchCity" and so on.
"dependon=Country,<empty>=allcities,Germany=GermanyCity,France=FrenchCity" and so on.
"dependon=Country,<empty&gt=allcities,Germany=GermanyCity,France=FrenchCity" and so on.
without success
Can some one help?
Edited by: Dirk Wiegele on Jan 23, 2011 12:21 PM
Edited by: Dirk Wiegele on Jan 23, 2011 12:22 PM

Hi
Yes, it is possible to generate an excel file in SAP. You can use any of the following FM's for the same:
1. EXCEL_OLE_STANDARD_DAT
2. GUI_DOWNLOAD
3. XXL_FULL_API
Hope it will help.
Regards,
Nikita

Configuration Scenario for BPM Using Integration Scenario

hi All,
I Have an Scenario where i am using BPM. Most of the blog tells about manually creating all Configuration objects. I had created an Integration Scenario for this scenario by referring to the earlier threads available for same.
Hoe to Create Integration Scenario for BPM Scenario
Integration Scenario in BPM and few more.
My IS looks like
Sender App Component - Integration Process - Receiver App Component
Now when i am trying to create Configuration scenario for same using model configurator, i am getting Model as "Not Configurable"
And when i click "Configurability Check" Button, i am getting below as status:
Component view IS_POC_BPM: Connection from receivePayload to getABSPayload does not have an inbound service interface
Component view IS_POC_BPM : Connection from sendABSPayload to getPayload has no outbound interface
getABSPayload and sendABSPayload are actions for Abstract interfaces.
IS_POC_BPM is the Integration Process Name.
Also in Integration Scenario, when i create connection between sender action to BPM action there is no inbound interface coming. And viceversa.
Please help me in identifying if i am doing any thing wrong in creating this scenario.
Is it possible to create Configuration Scenario for BPM Using Integration Scenario?
Thanks,
Mayank
Edited by: Mayank Gupta on Apr 21, 2010 6:35 AM

I think you shoudl refer the available Integration Scenarios created for BPMs in IR --> SAP BASIS --> http://sap.com/xi/XI/System/Patterns
Sender template will have the Action with Outbound Service Interface and then in the BPM Template the action will have Inbound Interface.....then within the BPM itself this inbound will be mapped to Action with Abstract Interface
may be after looking the Integration scenarios you will get more idea
Regards,
Abhishek.

Multiple message mappings in one integration scenario

I am trying to send a message to a marketplace that uses a web service interface. First I have to map the SRM PO to OAGIS XML, then This must be embedded in the message of the web service which requires a further mapping. In the integration scenario in the repository it seems straight forward, however the configuration of the scenario in the directory seems a little strange. This becaue the middle step does not really have an eternal receiver, as it must stay in the integration engine until the final conversion. Is it actually possible to perform several mapping in series or must I use an integration process for the middle mapping?

Andrew,
I am addressing the same problem as follows.
If you need a canonical mapping (such as OAGIS in your example) you need 2 mappings for 3 messages A(source) to B(canonical) to C(target). If you try to use XI (without BPM) as an action between the source and the target need to configure a channel in and out which as far as I can see is not possible.
When setting multi-mapping you seem to only have the folowing options:
Multiple source and multiple targets but this seems to limit you to one mapping program.
Multiple mappings if I have only one source and one target.
I think this is designed to map one or many sources to one or many targets in one mapping program.
Also you can apply a series of mapping programs to a single source and target pair.
If I understand Michal's solution you would define A as the source and C as the target. You then use multi mapping to get to the final result, but I think this is still on a single source and target. A second solution is to include multiple mappings as additional modules in the channel adpator.
To take advantage of the canonical approach I am using a simple integration process with a receive and send step. All this realy does is get round the problem you highlight of having to have channels for the middle action in your integration scenario. This is an overhead but does allow you to add splitting and combining messages if needed in the future without much additional configuration.
I can't see an easy option without BPM. Maybe there is an alternative but I can't find it. Maybe a next release of XI could include an interface mapping configuration that allows a sequnce of mapping betweem multiple pairs of maps:
Seq Source -
Mapping Program   -
Target
1 -
Message A -
Mapping Program 1 -
    Message B
2 -
   Message B -
Mapping Program 2 -
    Message C
I hope this helps.
Regards
Antony

Integration Process in Integration Scenario

Hi All,
I am trying to create an Integration scenario which can be used at configuration time to create all the config object. But during configuration time, in Assign Services step in Integration Scenario Configurator, it is only showing Business Systems under the product, previously configured in SLD. But i want to use the Imported Integration Process as the sender service. Is it possible?
Also the Assign Service screen is showing Assign Business System Services for A2A configuration. But we are using B2B configuration sometimes. So is there any way to do this?
regards,
Biranchi

Hi
Thanks for the reply. The above switch problem is solved. But now I am facing a new problem. I am making a synchronous call to BAPI from my BPM. How can this be implemented in Integration Scenario.
So how can I send a input message from BPM to BAPI and then take further steps only after getting response from BAPI. Is there any way to define synchronous Action??? And another point to be noted is that we are not using any communication channel to send the message from BPM or receive the response in BPM. We have only a receiver communication channel which receives the message for the BAPI.
So please help in solving this problem.
regards,
Biranchi

Actions in Integration Scenario

Dear all,
1. Can anyone tell the difference between Internal action and External action with respect to products and SWCV?
2. What is the Template option you find when you insert an application component?
Expecting your valid replies; if possible please send some documents or examples.
Thanks,
Harikumar. S

HI Harikumar,
Actions divide up the process flow of a business scenario. Actions in different application components can exchange messages with each other within a business scenario.
Internal Action
You can use internal actions in application components (of type Product Version or Main Instance) that (by using the product version) contain the same software component version in which the action is implemented.
External Action
You can use external actions in application components (of type Template or Product Version) that (by using the product version) contain the same software component version in which the integration scenario is implemented.
If you want to use an action to represent a function that is already installed in the product of the application component, use an internal action.
If you want to use an action to represent a function that is not yet provided by the product of the application component, use an external action.
In this way, you can enter functions in the integration scenario (for example, for communication parties) that are not yet provided by the product version of the application component.
All interfaces associated with an action are assigned to that action in the Integration Builder.
The exchange of messages between components takes places between two actions from different application components. The interfaces used in the exchange of messages are assigned to the two actions involved.
Cheers...
Vasu
** REward Points if found useful **

List of all possible integration scenarios

Similar Messages

Maybe you are looking for