List of billing that has not been cancelled

Is there a transaction or a way in SAP to show all the invoice that has not been cancelled? for example, a list of all the invoice of one customer that has not been cancelled. Showing only invoice with no reference of S1 cancellation invoice.

HI,
You can get all the Documents which were not cancelled from VBRK table
From the VBRK-FKSTO ( FKSTO is teh field for the cancellation status) put the FKSTO as Blank and check the Billing documents,
You will get all the documents which were not cancelled
regards,
santosh

Similar Messages

  • HT4623 I turned my Iphone 4 off. QWhen I went to turn it back on, it brought me to a silver screen that reads Iphone with no service, what does this mean? And no, my service has not been cancelled. please help?

    I turned my Iphone 4 off. When I went to turn it back on, up popped a silver screen that read Iphone with no service. My service has not been cancelled. What does this mean, please help?

    If a reset doesn't work, try and force iPad into Recovery Mode:
    1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
    2. Connect USB cable to computer
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune (make sure you have the newest version of iTune)
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • HT3702 I have an order that has not been completed and the old card no longer exists and I want to pay with my new card. the order is MHBG5FL5DH How do I delete the restriction in iTunes

    I have an order that has not been completed and the old card no longer exists and I want to pay with my new card. the order is MHBG5FL5DHHow do I delete the restriction in iTunes

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (122986)

  • I have 3 PC's.  Two of them I use at 2 different locations and only use them 6 months a year.  So, if I have Icloud for my calendar, and turn on a computer that has not been used for 6 months, does all the old information on that computer to go Icloud?

    I have 3 PC's.  Two of them I use at 2 different locations and only use them 6 months each year.  When I turn on a computer that has not been used for 6 months, does all of the old information from that computer end up in Icloud?  Does Icloud push all the new calendar and contact items over the old items?

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • A photo has been found in the iphoto library that has not been imported???

    When i open iphoto i get a message saying "a photo has been found in the iphoto library that has not been imported, would you like to import it?" I have tried what everyone is saying to do, but when i look under show package contents there is no import folder to move. only a folder that says contents and i've looked all through that, still no import folder. Even though i click no i do not want the photo imported it still is stored on my external hard drive and every so often i have to go delete TONS of photos and when you click on the photo it doesn't even actually show up as anything.

    but when i look under show package contents there is no import folder to move. only a folder that says contents
    You're looking at the iPhoto.app package. Those instructions are for the iPhoto Library package. That's in your Pictures Folder.

  • Updated to iOS 5 and now photos sent with text message show as sent, but are not received to an iPhone that has not been updated.

    Updated  to iOS 5 and tried sending a message with a phot to an iPhone that has not been updated. My message shows as sent, but neither the text or photo are received. Text alone works fine.

    This is being caused by using the same Apple ID for iMessage.  To fix this you have two choices:
    On all but one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID.  Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
    On all of the phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".

  • When I click "Buy Now" in iPhoto's book I get the following message: Your book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?"

    When I click "Buy Now" in iPhoto's book I get the following message: "Your book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?"
    How do I proceed?  How do I identify which is "default text?"

    What version of iPhoto are you using?
    Go thru each page, check the layout to see if there's a text box included on the page and make sure there is text in that text box.  If not it may show the "holding" text like this:
    If you don't want to change the page layout to one that only has photos and no text boxes just select that holding text and put a space in its place.
    OT

  • When I click Buy Book this appears our book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue? will the text I have sellected still be ok or will the book have missing text help Pleas?

    I just spent 3 days creating a book [32 pages], with photos and text but when I click Buy Book In iPhoto this appears>
    Our book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?
    My question is will the text I have sellected to use still be ok, am I safe to continue and buy or will the book have missing text ?
    The book is for special birtday in 2 weeks time  Please Help.G
    <Email Edited by Host>

    Yes, you're safe to continue.  That means that there are text boxes that you did not put any text into and they contain the holding text which will not be printed.  That text is shown in a light grayt and is in Latin.  Normally you can just put a space in the text box to replace the holding text so as not to get that warning message.
    Before ordering the book proof the book according to this Apple document: iPhoto, Aperture: Previewing an order in iPhoto or Aperture. Check the pdf file for any missing text or photos and any warning indicators in the text boxes indicating that some of the text has exceeded the space allotted in the text box.
    Keep the pdf file to compare with the printed copy when you reciive it.
    OT

  • I wonder why that has not been deducted the amount from my bank account

    I wonder why that has not been deducted the amount from my bank account

    Hello Iria,
    Most unusual.  I think you will need to wait a few days in case it is a bank problem.
    If this situation continues you should contact Apple, after all, you don't want to be thought of as taking advantage, I'm sure.  That's why you raised it in the first place.
    Do keep us updated.
    Thank you for the star.

  • HT204370 can you return a movie purchased by mistake that has not been viewed yet?

    can you return a movie purchased by mistake that has not been viewed yet?

    Hi jimmy505,
    The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    Find the email receipt for your purchase.
    Click Report a Problem under the app that is having the issue.
    When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having an issue with.
    From the Choose Problem dropdown menu, choose the appropriate issue.
    Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    Click Submit to have your issue reviewed.
    Hope this helps ....
    - Judy

  • RMAN backup archive logs on tape that has not been backuped yet...

    We are using RMAN with catalog on Legato. Oracle 10gR2.
    Our archive log backup is taking every 2 hours with scriipt:
    run {                                                            
    allocate channel t1 type 'SBT_TAPE';
    allocate channel t2 type 'SBT_TAPE';
    send 'NSR_ENV=(NSR_SERVER=hitbackup.hit.hypohr,NSR_CLIENT=a22ff020.hit.hypobck)';
    # 0.0840278 = 121 minutes!
    backup archivelog FROM TIME = 'sysdate-0.0840278' filesperset 50 format '/arch1_%d_%u/';
    release channel t1;
    release channel t2;
    }In the night we take everyday full backup where we delete all 9 days old archive log which has been backuped on tape at least once. The script is following:
    run {
    allocate channel t1 type 'SBT_TAPE';
    allocate channel t2 type 'SBT_TAPE';
    send 'NSR_ENV=(NSR_SERVER=hitbackup.hit.hypohr,NSR_CLIENT=a22ff020.hit.hypobck)';
    backup full database filesperset 2 format '/full_%d_%U/';
    release channel t1;
    release channel t2;
    allocate channel d2 type disk;
    delete archivelog until time 'trunc(sysdate)-9'
    backed up 1 times to device type SBT_TAPE;
    release channel d2;
    }Problem is that sometimes archive log backup is not performed (Legato head is busy with other backups or some restore that happened in the time when backup is scheduled and later 2hours frame is missing those logs) and then we backup them with some manual script.
    We'd like to know how to backup to tape all archive logs in last 5 days that has not been backuped once to tape. I.E:
    backup archivelog FROM TIME = 'sysdate-7' filesperset  50 format '/arch1_%d_%u/'
    backed up 0 times to device type SBT_TAPE;This part will be included in daily job...which should recollect all missing archive logs from last seven days.
    THX

    You could try to use the NOT BACKED UP x TIMES clause from BACKUP command.

  • Call of a method or kernel Method that has not been implemented

    hi,
    Iam Working on CRM Sandbox system and  R/3 system my reqeuirement is to transfer data from R/3 to CRM system through Idoc. so I have  IDOC (3 in number now) just sitting in XXCLNT200.The IDOC type is HRMD_A01.it's refused to be processed into application and there is no error on the IDOC.
          In this Scenario R/3 system idoc status is 53 - application document posted so in R/3 system idoc woking is fine . Coming to CRM System IDOC status is - 64  Ready to posted in application . SO iam reprocess the IDOC using WE19 . While reprocess the idoc it's is going to be in  dump .
    Runtime Errors         CALL_METHOD_NOT_IMPLEMENTED                                    
    Exception              CX_SY_DYN_CALL_ILLEGAL_METHOD                                  
    Date and Time          22.08.2007 12:12:45                                                                               
    Short text                                                                               
    Call of a method or kernel Method that has not been implemented                                                                               
    What happened?                                                                               
    Error in the ABAP Application Program                                                                               
    The current ABAP program "CL_EX_HRSYNC_P================CP" had to be            
          terminated because it has                                                       
         come across a statement that unfortunately cannot be executed.       
    pls help me

    Hi Chandra,
    I got the same error.
    I have developed the webdynpro screen to upload the xlsx file format using the below thread
    http://scn.sap.com/community/web-dynpro-abap/blog/2012/04/05/upload-xlsx-file-in-webdynpro-abap-and-view-its-content#comment-338018
    I have successfully activated the component but when i run the component i found the following error.
    Runtime Errors         CALL_METHOD_NOT_IMPLEMENTED                                   
    Exception              CX_SY_DYN_CALL_ILLEGAL_METHOD
    Short text                                                                              
    Call of a method or kernel Method that has not been implemented  
      Error in the ABAP Application Program
      The current ABAP program "/1BCWDY/EIMGDDDP2WS8KQ67GU1D==CP" had to be
       terminated because it has
      come across a statement that unfortunately cannot be executed.
    can please guide me .
    Thanks,
    Harish Singh.

  • Is there a way to recover my photos on my iphone that has not been backed up.  It was dropped in water and will not turn on.  I have had it in rice for 24 hours.  Thank you

    Is there a way to recover my photos on my iphone that has not been backed up.  It has been in rice for 24 hrs. 
    Thank you !

    No since thay have not been backed up. Hopefully the phone will work long enough after the 'rice treatment" for you to recover the phone and do a backup. The rice sometimes does not work. Good luck.

  • When I try to open Adobe InDesign, I get this message: Adobe InDesign terminated because of a serious problem/ fault. Start again to restore work in InDesign documents that has not been archived.

    What can I do to start the program again, when it does not answer? The only message I get is that there is a serious problem.

    Thanks a lot for your quick reply! However, it works again, after a restart!
    Best regards,
    Hans
    Hans Storhaug
    Director
    Norwegian Emigration Center
    4005 Stavanger
    Norway
    m  +47 908 31 097
    9. juli 2014 kl. 10:57 skrev Mylenium <[email protected]>:
    When I try to open Adobe InDesign, I get this message: Adobe InDesign terminated because of a serious problem/ fault. Start again to restore work in InDesign documents that has not been archived.
    created by Mylenium in Adobe Creative Cloud - View the full discussion
    Without knowing anything about your system, nobody can advise. In any case, the ID forum would be a better place to ask such questions.
    Mylenium
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6535011#6535011
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I have just updgraded to Mavericks and my bootcamp has vanished! I have an entire webite that has not been backed up in a while. All lost.... anybody got any ideas?

    I have just updgraded to Mavericks and my bootcamp has vanished! I have an entire webite that has not been backed up in a while. All lost.... anybody got any ideas?

    If you cant mount that partition in the disk utility, then try these steps in the terminal:
    http://chrislee.kr/wp/2011/05/23/how-to-mount-bootcamp-drive/

Maybe you are looking for

  • IOS 5 and voice memos won't sync

    Hi, so, like everyone else, I update to iOS 5 and now my voice memo won't sync.  I would like to NOT have to delete them to restore as they have all my lectures from school on it.  But, if I have to restore, is there anyway of backing it up before re

  • Customized responsibility not run " Supplier Open Balance Letter Report"

    I have customized standard Responsibility from " Payable Manager " , this Responsibility run the " Supplier Open Balance Letter Report" with completed Error Status . ? Even it has same Request Group " All Reports " and " Payables " Application. The E

  • Why won't my credit card info stay in the system?

    I have put in all of the info off my credit card multiple times and then when I go to buy a game it says I need to visit apple/iTunes support. When I go to make sure all the credit card info is correct it hasn't saved my security code on the back of

  • Have a new computer with a different name.  New computer does not reconize the ipod classic device?

    Have a new computer with a different name.  New computer does not recognize the ipod classic device? How can I remody this problem

  • RUN_PRODUCT REPORTS

    HAS ANYONE BEEN ABLE GENERATE A REPORT USING RUN_PRODUCT IN THE DEVELOPER 6/INTERNET ENVIRONMENT. IF YES, WHAT SERVER REGISTRY SETTINGS MADE IT WORK. I KNOW ABOUT SHOW_DOCUMENT AND WOULD LIKE TO AVOID USING IT. null