List of built-in Functions in SAP system

Hi,
I am trying to find the complete list of built-in function available in SAP system. I searched in SAP help but could not find a comprehensive list at all. I am wondering if anyone can help me locate the list.
Thank you in advance,
Sunny

Hi Sunny,
in my system are already 77.197 transaction codes defined. OK, some are customer development, but on the other hand we are fare away from having all modules installed.
I'm not sure, if you are looking for all transactions, all function modules, all BAPIs, all interfaces...
...but be sure, no one can EVER go through a whole list.
You have to restrict your search: to a specific topic (e.g. only material master), specific technics (e.g. only IDOCs) - then you can successfully browse through the possibilities.
Regards,
Christian

Similar Messages

  • How to find list of languages installed in the SAP system?

    Hi All,
    Please tell me, how to find list of languages installed in the SAP system?
    Thanks and Regards,
    Kumar.

    Hi Virgo Rhyme
    Hope the following info will be helpful
    3rd - SAP is the 3rd largest software company in the world
    30,000 - Total number of people employed by SAP
    5,400 - Number of programmers employed by SAP
    $7.024 billion - FY03 Revenue
    $1.077 million - FY03 Net Income
    12,000 - Number of companies using SAP
    79,800 - Number of SAP installations
    12,000,000 - Number of people using SAP
    120,000,000 - Total number of people in the 12,000 companies who are using SAP
    28 - Number of languages supported by SAP
    46 - Number of country-specific versions of SAP
    22 - Number of industry-specific versions of SAP
    1,000 - Number of pre-defined best practices contained in the SAP system
    10,000 - Number of tables requiring configuration in a full SAP implementation
    55,000 - Number of SAP experienced consultants worldwide
    28 - Number of years ago SAP was started
    Reward if helpful
    Regards
    Lakshman

  • How to find the list of  different material in other SAP system.

    We have two SAP different systems.  there is an integration between two systems.
    One system has 2 millions materails (parts) and other system has 6 millions materails (parts).
    I need to know the list of what are those 4 miilions of materials in the other sap system .
    How can I find out the list of the 4 millions additional material list  ?
    Can you please help me .
    YOUR HELP WILL BE HIGHLY APPRECIATED.
    Thanks in advance.

    Hi,
    Compare two different environments/systems in t.code: SCU0 . Also you can try with OY19
    Regards,
    Biju K

  • List of Built in Functions

    Hi,
    Can anyone tell me how to get list of built in Oracle functions..eg(Sum,Count,Trim,etc)..
    Thanx in adv
    Balajee

    Hi,
    When we install Oracle Discoverer, it loads a table EUL functions which has some built in functions and its parameters, whcih in turn is used by the Report of Dicoverer.so in that line can we have something which loads the built in fiunctions into a table..
    Balajee

  • How to find out a list of modified objects in an SAP system

    Hi all, not sure if this is the right place to ask.
    In preparation for an upcoming upgrade of a SAP 4.6c system, I have been asked to generate a list of SAP objects that have been modified over the years.
    Is there a table or a report that I can use to find this out? Thanks!

    Hi,
    Please check the table TADIR. From that table u can get the modified object details.
    thanks,
    Senthil Kumar.C

  • Javascript Built in function in SAP BW

    Hi Experts,
    I have a issue.
    Can we edit the standard javascript function ' SAP BW'.?
    Can anyone please let me know where to find it if we can edit it?
    Thanks
    Prasad

    Sibby,
    There is no "built-in" code in VB that I am aware of. However, you could use this code which I wrote for SQL Server. For Oracle, you would have to change to the appropriate table to get all the table names. You can filter by table name to get just your tables like I did below (My_).
    '* Now select all the files and add to access.
    sSQL = "SELECT name, id FROM sysobjects WHERE xtype = 'U' AND SUBSTRING(name, 1, 3) = 'My_' ORDER BY name"
    Set rstTemp = OpenRdSetView(sSQL:=sSQL, adoConnection:=adoConnection)
    On Error GoTo TableExistError
    '* Loop through all my database tables and copy to the Access database.
    With rstTemp
    Do While Not .EOF
    '* Copy this to the Access backup database.
    sTableName = .Fields("Name").Value
    '* Select all records from the SQL Server table and copy to the local Access database.
    sSQL = "SELECT * INTO " & sTableName & " FROM "
    sSQL = sSQL & "[odbc;dsn=" & sDSN & ";UID=" & sUID & ";pwd=" & spwd & ";]." & sTableName
    adoBackupConnection.Execute sSQL, , adExecuteNoRecords
    '* Go to next table.
    .MoveNext
    Loop
    End With

  • How to see the list of Negative wagetypes in a SAP system

    Hi
    I want to see the list of all wagetypes where the user enters negative number, Is there any standard report or  Table where can i find these, please provide the path.
    please help
    Regards
    Sangitha

    Hi Sangitha,
    Are you talking about wage types for IT0014&15? You can check table PA0014 and PA0015 via SE16 with the condition that amount < 0.  Export the resutl to Excel and group the wage type from Excel sheet, then the list will be what you want.
    Regards,
    Jim

  • List of users and their decimal notation settings in SAP system

    Hi all, i'm looking to get my hands on a list of all users in our SAP system and their respective decimal notation settings? I know that these can be mass changed using SU10 however I am unable to determine how to view a list of users and their settings.
    Thanks,
    James

    Hi James,
    You can find many useful reports, in SUIM transaction to see user details, but not decimal notation field. I don't know a report to show decimal notations, but as a workaround, in order to see the decimal notation, you can check "USR01-DCPFM" by using "SE16".
    Best regards,
    Orkun Gedik

  • App.server load balancing for SAP System with 1 PS

    Hi,
    In SAP CPS 7.0 (Build M26.12) I have a SAP system with Central Instance + 10 App.servers, but all instances are managed by 1 ProcessServer.
    After activating the "App.server load balancing" setting in SAP system definition the application servers are becoming visible in CPS with their load factors (number of BGD wp's on app.servers) and load numbers (number of active jobs on app.servers).
    This is so far fine, but the additional functionality is not working as I would expect, I have issues with 2 functionalities:
    1. Based on documentation after activating also the XAL connection the CPS should submit the job on app.server with best performance based on XAL monitoring data filling the TARGET_SERVER parameter.
    This functionality is not working for me at all
    2. A useful functionality after activating the "App.server load balancing" setting is that the ProcessServer is going to "Overloaded" status when all BGD wp's of SAP system are occupied, thus restricting submitting new jobs during overload situation. But I had an issue also with this functionality, after SAP system recovery from overload situation, the CPS still remained in Overload status (so no new jobs were submitted).
    As a workaround I had increased the treshold values for loads on all app.servers for this SAP system, what was fine for several days, but after a while I believe this was a reason of unexpected performance issues in CPS, therefore I have deactivated the 'App.server load balancing" setting at all for this ProcessServer.
    I would appreciate your feedbacks with this functionality.
    Thanks and Regards,
    Ernest Liczki

    Hi Preetish,
    This connect string option is to loadbalance RFC connections. These are balanced upon login, once you are connected to a particular application server (AS) you stay on that server until you reconnect.
    Since CPS uses multiple RFC connections, this will result in the connections being distributed over the available AS resources which is fine as long as they are generally evenly loaded. If you have certain AS hosts that are continuosly more loaded than the rest, then you probably don't want the CPS RFC connections to end up on these servers.
    The original question is about loadbalancing of batch jobs over the available AS resources, and this is done independent of the RFC connection load balancing. Even if all CPS RFC connections are pinned to the DB/CI host, you can still loadbalance jobs over the available SAP AS hosts, either by using SAPs builtin balancing, or the CPS algorithm by activating the checkbox as indicated in the first entry in this thread.
    Finally, to reply to Ernest's question: I believe there are some fixes on the app load balancing in the latest release, M26.17 should be available on the SWDC now.
    Regards,
    Anton.
    Edited by: Anton Goselink on May 29, 2009 9:06 PM

  • StockList upload to SAP system

    Hi Friends,
    This is shalini shah,
    My requirement is stock list(IA05)upload data from non-sap system to SAP system.
    right now I am using BDC table control method.
    please tell me is there standard BAPI or LSMW method for this one.
    and how to do BDC tabelcontrol,
    I did  internal table declaration and GUI_UPLOAD, i am getting Runtime error.what can I do next.
    Regards,
    Shalini Shah.

    check this fm
    BAPI_MATERIAL_STOCK_REQ_LIST

  • Error while creating request list Unable to detect the SAP system directory

    We are upgrading SAP BW (NW 7.0 EHP1) to SAP BW (NW 7.3)
    source OS: Windows 2008 R2,  source DB: MSSQL server 2008 R2 SP1 CU3
    I had started the upgrade by running: STARTUP.BAT
    I had started the DSUGui on the server (CI / DB on the same server) from: D:\usr\sap\BP1\upg\sdt\exe\DSUGui.bat
    I ran both programs (run as administrators).
    Once SAP Gui connects and was able to create userid/ password and when ready to start the initialization phase (click next)
    gives me the error
    Error while creating request list - see preceeding messages. Unable to detect the SAP system directory on the local host
    I had tried STARTUP.BAT "jce_policy_zip=Z:\export-import\downloads\jce_policy-6'  and still the same error.
    I had started DSUGui.bat with trace and the trace file contents are
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[2.0.7.1006]/>
    <!NAME[D:
    usr
    sap
    bp1
    upg
    sdt
    trc
    server.trc]/>
    <!PATTERN[server.trc]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
    <!ENCODING[UTF8]/>
    <!LOGHEADER[END]/>
    Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:102) [Thread[ExecuteWorker,5,main]]: Execution of command com.sap.sdt.engine.core.communication.CmdActionEvent@376433e4 failed: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
    Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
    Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
    Jan 11, 2012 10:14:58 AM [Error]:                                                 com.sap.sdt.engine.core.communication.CmdActionEvent [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
         at com.sap.sdt.dsu.service.req.DSURequestListBuilder.persistSystemInfo(DSURequestListBuilder.java:277)
         at com.sap.sdt.dsu.service.DSUService.createRequestList(DSUService.java:338)
         at com.sap.sdt.dsu.service.controls.DSUListener.actionNext(DSUListener.java:144)
         at com.sap.sdt.dsu.service.controls.DSUListener.actionPerformed(DSUListener.java:67)
         at com.sap.sdt.server.core.controls.SDTActionListener$Listener.actionPerformed(SDTActionListener.java:46)
         at com.sap.sdt.engine.core.communication.CmdActionEvent.actOnEvent(CmdActionEvent.java:43)
         at com.sap.sdt.engine.core.communication.CmdEvent.execute(CmdEvent.java:69)
         at com.sap.sdt.engine.core.communication.ExecWorker.handleCmd(ExecWorker.java:36)
         at com.sap.sdt.engine.core.communication.AbstractWorker.run(AbstractWorker.java:93)
    I could not get Upgrade started.  Any help is appreciated
    Thanks
    Prathap

    Did you get this solved?
    I have the same problem

  • How to copy function group from one SAP system to another

    dear all,
    our company will set up a sub-company currently,and the sub-company want to copy some programs from our SAP system.
    how to pack and copy function group?
    pls help me,tks!

    Hello  Snow zeng,
    Will the 2 systems be connected ? I.e Same land scape ?
    If they are non connected systems, check this Wiki by Marcin [How to copy Repository Objects between non-connected SAP systems|http://wiki.sdn.sap.com/wiki/display/ABAP/HowtocopyRepositoryObjectsbetweennon-connectedSAPsystems]
    Regards

  • Not Able to see SAP systems in List of Available SAP Systems for Crystal R

    Hi All,
    We have installed Crystal reports 2008 and SAP integration KIt client software on my machine. I am trying to create Crystal reports based on the BI query and I could see SAP Connections in the 'Create new connections list' but not able to see any SAP systems in the list of 'Available SAP Systems'.
    How to Add SAP systems to this list.
    Thanks,
    Chindam Praveen Kumar.

    1. Define an environment variable (user or system) with the name SAPLOGON_INI_FILE . This variable should contain the path to your saplogon.ini file including the file name eg. if the saplogon.ini resides in the folder c:\windows the variable should contain the following value c:\windows\saplogon.ini
    2. Open your saplogon.ini file using Notepad and go to File->Save as. Choose All Files in the field Save as type and DO NOT change the name of the file. In the field Encoding make sure that UTF-8 is selected.
    ingo

  • Calling RFC function module in other SAP system...

    Hi,
    I have a report on one SAP system and a function module on other system. The function module is RFC enabled. How can I call this RFC enabled function module from other SAP system in the report which is different SAP ?
    system.
    Thanks.
    Regards,
    Rajesh.

    call the function module in orginal system in se38 ,copy the function module ,paste the function module in other system,and maintain destination here ,otherwise you will get short dump.
    here detination should be SM59 destination,this is case sensitive.
    Reward Points if it is helpful
    Thanks
    Seshu

  • Empty available SAP systems list.

    Hello all,
    I try to make my first CR report from SAP table but available SAP systems list is empty, when i try "Create New Report from a Query" i see all systems in SAP Logon window. Could anyone help me? Thanks in advance.
    CrystalReports 2008 Trial(30 day trial) + BusinessObjects XI Integration for SAP Solutions(90 day trial).
    Paul Smuda

    Hi,
    locate the saplogon.ini file on the machine you installed the CR designer and create an environment variable with the name SAPLOGON_INI_FILE that contains the path (ATTENTION: include also the name of the file itself) to the saplogon.ini file.
    If the system list is still empty after that, then please open the saplogon.ini using Notepad, go to File->Save as and choose the file to be encoded as UTF-8 (Do not modify the name). Just overwrite the existing file and try again.
    Regards,
    Stratos

Maybe you are looking for