List of Built in Functions

Hi,
Can anyone tell me how to get list of built in Oracle functions..eg(Sum,Count,Trim,etc)..
Thanx in adv
Balajee

Hi,
When we install Oracle Discoverer, it loads a table EUL functions which has some built in functions and its parameters, whcih in turn is used by the Report of Dicoverer.so in that line can we have something which loads the built in fiunctions into a table..
Balajee

Similar Messages

List of built-in Functions in SAP system

Hi,
I am trying to find the complete list of built-in function available in SAP system. I searched in SAP help but could not find a comprehensive list at all. I am wondering if anyone can help me locate the list.
Thank you in advance,
Sunny

Hi Sunny,
in my system are already 77.197 transaction codes defined. OK, some are customer development, but on the other hand we are fare away from having all modules installed.
I'm not sure, if you are looking for all transactions, all function modules, all BAPIs, all interfaces...
...but be sure, no one can EVER go through a whole list.
You have to restrict your search: to a specific topic (e.g. only material master), specific technics (e.g. only IDOCs) - then you can successfully browse through the possibilities.
Regards,
Christian

Using SSRS Built in Functions in SharePoint

Hi there,
I currently have a number of reports deployed on a SharePoint site at work. I would like to monitor who actually uses which report and when they ran the report and also how long the report ran for. This is for auditing purposes and getting an idea
of the performance of these reports.
I came across the following built in functions on SSRS; UserID, ReportName, ReportServerUrl and ExecutionTime. Is it possible to use these functions somehow in SSRS & SharePoint whenever someone accesses a particular report and perhaps write this
information to a SharePoint list within our SharePoint site.
If this is possible, how would I go about doing this?
Also, some of our reports run off parameters, is it possible to capture what parameters were used as well?
Any help would be much appreciated. Thanks.

you can get most of these information from executionlog tables available from reportserver database
http://www.mssqltips.com/sqlservertip/2722/sql-server-report-server-2008-r2-execution-log-reports/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

CR XI Release 2 Built-In Functions Reference

Hi all.
This may be a dumb question but is there any reference I can find online that lists all the built-in functions and operators that come with CR XI? I know the Functions on Function Explorer usually kind of show how the syntax should be but I'd like to know if there's a detailed documentation on how each function should be used and the optional parameters that come with them at times.
Already tried looking at the product guides section to no avail.
Thanks.

Thanks Amr.
I've already looked at the product guides and unfortunately was unable to find such a list.
Surely there must be some kind of a detailed documentation on how all the built in functions work?

How to find out list of procedures and functions inside a package

How I can find out the list of Procedures and Functions inside a Package.

Look at ALL_PROCEDURES and ALL_ARGUMENTS.

How to use a mysql built-in function with dataprovider

hi.
I want to use a mysql built-in function, for example, MD5() on a column when updating a table with dataprovider.
Something like this doesn't work:
MyDataProviderOne.setValue("tablename.field_name", "MD5('some text')");
How should it be done?
thanks.
Mike.

hi.
thanks. this helped, but I'd like to use also different functions, that's why, I'd rather do it by MySQL built-in functions with dataprovider... Is there any way to do that?
best regards.
Mike.

SSMS 2012: Import XML File to SQL Table - 'value' is not a recognized built-in function name!!??

Hi all,
I have the following xml file (books1.xml):
<bookstore>
<book>
<BookID>1</BookID>
<title>Everyday Italian</title>
<author>Giada De Laurentiis</author>
<year>2005</year>
<price>30.00</price>
</book>
<book>
<BookID>2<BookID>
<title>Harry Potter</title>
<author>J K. Rowling</author>
<year>2005</year>
<price>29.99</price>
</book>
<book>
<BookID>3<BookID>
<title>XQuery Kick Start</title>
<author>James McGovern</author>
<year>2003</year>
<price>49.99</price>
</book>
<book>
<BookID>4<BookID>
<title>Learning XML</title>
<author>Erik T. Ray</author>
<year>2003</year>
<price>39.95</price>
</book>
</bookstore>
In my Microsoft SQL Server 2012 Management Studio, I executed the following SQL Query code:
--XQuery w3schools example using books1.xml in C:\Temp folder
---SQL Query W3books Title
---9 March 2015
USE XML_XQUERY
GO
CREATE TABLE W3Books(
BookID INt Primary Key,
Title VARCHAR(30));
INSERT INTO W3Books (BookID, Title)
SELECT x.book.query('BookID'), value('.', 'INT'),
x.book.query('title'), value('.', 'VARCHAR(30)')
FROM (
SELECT CAST(x AS XML)
FROM OPENROWSET(
BULK 'C:\Temp\books1.xml',
SINGLE_BLOB) AS T(x)
) AS T(x)
CROSS APPLY x.nodes('W3Books/book') AS x(book);
SELECT BookID, Title
FROM W3Books;
I got the following error messages:
Msg 195, Level 15, State 10, Line 7
'value' is not a recognized built-in function name.
Msg 156, Level 15, State 1, Line 16
Incorrect syntax near the keyword 'AS'.
I don't know why I got the error of 'value' is not a recognized built-in function name. Please kindly help and tell me what is wrong in my code and how to correct the error.
Thanks, Scott Chang
P. S.
(1) I mimicked the xml file and SQL Qeury code of Import XML File to SQL Table in
http://pratchev.blogspot.com/2008/11/import-xml-file-to-sql-table.html. The xml file and the code of this sample worked in my SSMS 2012 program.
(2) I am learning the "CAST" and "CROSS APPLY" in the Create Instances of XML Data of Microsoft MSDN - it is very abstract to me.

Hi Stan210, Thanks for your nice response.
I corrected my xml file as you pointed out.
I made some changes in some code statements of my SQLQueryW3BookTitle.sql as you instructed:
--XQuery w3schools example using books1.xml in C:\Temp folder
---SQL Query W3books Title
---10 March 2015
USE XML_XQUERY
GO
CREATE TABLE W3Books(
BookID INt Primary Key,
Title VARCHAR(30));
INSERT INTO W3Books (BookID, Title)
SELECT x.book.value('/BookID[1]', 'INT'),
x.book.value('/title[1]', 'VARCHAR(30)')
FROM (
SELECT CAST(x AS XML)
FROM OPENROWSET(
BULK 'C:\Temp\books1.xml',SINGLE_BLOB) AS T(x)
) AS T(x)
CROSS APPLY x.nodes('bookstore/book') AS x(book);
SELECT BookID, Title
FROM W3Books;
I executed my revised sql and I got the following Message and Results:
Msg 515, Level 16, State 2, Line 6
Cannot insert the value NULL into column 'BookID', table 'XML_XQUERY.dbo.W3Books'; column does not allow nulls. INSERT fails.
The statement has been terminated.
(0 row(s) affected)
Results:
BookID Title
I don't know why I just got the names of columns in Results and the "Cannot insert the value NULL into column 'BookID', table 'XML_XQUERY.dbo.W3Books'; column does not allow nulls, insert fails." in Messages. Please kindly help, advise me
how to correct the errors and respond again.
Many Thanks again,
Scott Chang

The InitCVIRTE function is not listed in the NIDAQ function reference online help? Why? and where can I find a description of this function?

the InitCVIRTE function is not listed in the NIDAQ function reference online help? Why? and what does she do?and where can I find a description of this function? Can i use this function with visualc++ 6.0?

The InitCVIRTE function is in the CVI run time engine (cvirte.dll)..not part of NI-DAQ.
Applications written or using CVI may call this function..
How are you running into this ?
From the CVI help...
This function performs initialization of the CVI Run-Time Engine. It is needed only in executables or DLLs that are linked using an external compiler. Otherwise, it is harmless.
It should be called in your main, WinMain, or DllMain, function. The parameter values you should pass depend on which of these three functions you are calling InitCVIRTE from. The following examples show how to use InitCVIRTE in each case.
If you are using main, your code should be as follows.
int main (int argc, char *argv[])
if (InitCVIRTE (0, argv, 0) == 0)
return -1; /* out of memory */
/* your other code */
return 0;
If you are using WinMain, your code should be as follows.
int __stdcall WinMain (HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPSTR lpszCmdLine,
int nCmdShow)
if (InitCVIRTE (hInstance, 0, 0) == 0)
return -1; /* out of memory */
/* your other code */
return 0;
If you are creating a DLL, you must call InitCVIRTE and CloseCVIRTE in your DllMain function, as in the following.
int __stdcall DllMain (void *hinstDLL, int fdwReason,
void *lpvReserved)
if (fdwReason == DLL_PROCESS_ATTACH)
if (InitCVIRTE (hinstDLL, 0, 0) == 0)
return 0; /* out of memory */
/* your other ATTACH code */
else if (fdwReason == DLL_PROCESS_DETACH)
/* your other DETACH code */
CloseCVIRTE ();
return 1;
NOTE: The prototype for InitCVIRTE is in cvirte.h, not
utility.h.
NOTE: In CVI 4.0.1, this function was expanded from one to
three parameters. Executables and DLLs that were
created using the one-parameter version of the function
will continue to work properly.
/*-------------------- Prototype ---------------------*/
int InitCVIRTE (void *HInstance, char *Argv[], void *Reserved);
Nandan Dharwadker
Staff Software Engineer
Measurement Studio Hardware Team

How to call the built in functions from flex?

I want to use some of the Built in functions like the twelvesprints.getActivityOwnerId() in flex. From the java example i could make out that we needed to import some classes to do this but was unable to find them for flex.

You can download the SWC file for Flex Method app here:
https://sandbox.12sprints.com/FlashMethodLib.swc
Java samples are located at
https://streamwork.com/api/Java.zip
Method exaples are available at:
https://streamwork.com/api/methods/com.streamwork.hello_world.zip
https://streamwork.com/api/methods/com.streamwork.constants.zip
https://streamwork.com/api/methods/com.streamwork.using_arrays.zip
com.streamwork.testFlash

What are the Built-In-Functions in XSLT mapping?

what are the Built-In-Functions in XSLT mapping?

hi praveen
check the below blogs
XSLT MAPPING
Step u2013 By u2013 Step Simple Approach for XSLT Mapping
Step By Step Simple Approach for XSLT Mapping
XSLT mapping for multiple segments of XML
XSLT mapping for multiple segments of XML
IF - ELSE IF and XSLT - A Better work around ?
IF - ELSE IF and XSLT - A Better work around ?
Calling instance (object) method of ABAP Class into xslt mapping by using SAP: CALL-EXTERNAL
Calling instance (object) method of ABAP Class into xslt mapping by using SAP: CALL-EXTERNAL
xpath functions in xslt mapping
xpath functions in xslt mapping
Using XSLT Mapping within the J2EE Adapter Framework
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3823 [original link is broken] [original link is broken] [original link is broken]
EDIFACT to XML - Stylus Studio Solution
EDIFACT to XML - Stylus Studio Solution
Running NetWeaver's XSLT processor from XMLSpy
Running NetWeaver's XSLT processor from XMLSpy
generic xslt mapping part 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
generic xslt mapping part 1          part2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
xslt recursive templates
XSLT: Recursive Templates
Generating Generic XML / HTML files without using XSLT Mappings
Generating Generic XML / HTML files without using XSLT Mappings
regards
kummari

Built-in functions inside text_io

I am using text_io to get dir information. When inside the loop built-in functions such as to_date are not working. It is simply ignoring the function. However if I put a simply message box, it works.
Is there a limitation to using functions inside text_io.
Also, any code, including message boxes, outside text_io exit loop is ignored. Is there something I can do to fix it?
Thanks,
Srikanth

But if I want to compare 2 dates, I cannot assign it to variables. I need to something like
If to_date(a) - to_date(b) > 0 then
else
end if;
This is not working inside text_io. Any ideas?
thanks

Built in Function to Populate an access table from an Oracle Table through VB 6.0

Dear all,
Is there any built in function in VB 6.0 to populate an access table directly from an oracle table or SQL Server(Assume Both has the same columns & data type).
(Just like the DoCmd command which can be used to populate an excel sheet directly from an access table).
Please help.
Regards
Sibby.

Sibby,
There is no "built-in" code in VB that I am aware of. However, you could use this code which I wrote for SQL Server. For Oracle, you would have to change to the appropriate table to get all the table names. You can filter by table name to get just your tables like I did below (My_).
'* Now select all the files and add to access.
sSQL = "SELECT name, id FROM sysobjects WHERE xtype = 'U' AND SUBSTRING(name, 1, 3) = 'My_' ORDER BY name"
Set rstTemp = OpenRdSetView(sSQL:=sSQL, adoConnection:=adoConnection)
On Error GoTo TableExistError
'* Loop through all my database tables and copy to the Access database.
With rstTemp
Do While Not .EOF
'* Copy this to the Access backup database.
sTableName = .Fields("Name").Value
'* Select all records from the SQL Server table and copy to the local Access database.
sSQL = "SELECT * INTO " & sTableName & " FROM "
sSQL = sSQL & "[odbc;dsn=" & sDSN & ";UID=" & sUID & ";pwd=" & spwd & ";]." & sTableName
adoBackupConnection.Execute sSQL, , adExecuteNoRecords
'* Go to next table.
.MoveNext
Loop
End With

'SUBSTRING_INDEX' is not a recognized built-in function name.

actually iam modifing the servlet code to connect with MSSQL.previously it was MYSQL.now compiling is ok.
while running it shows error at the top of the linked page as...
error
[Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]'SUBSTRING_INDEX' is not a recognized built-in function name.
->can any one give me the solution for this error.

Don't use that function because it doesn't exist in SQL-Server.
OR
Change your SQL to use a function that does exist.
OR
Create a user defined function in SQL server that has that name.

[SQL Server]'TO_DATE' is not a recognized built-in function name

Running 11g dg4msq and getting the error :
SQL> select * from all_users@dg4msql;
select * from all_users@dg4msql
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Oracle][ODBC SQL Server Driver][SQL Server]'TO_DATE' is not a recognized
built-in function name. {10196,NativeErr = 195}

Hi,
This problem happened on Windows platforms after upgrading the RDBMS used to access the gateway from 10.2.0.3 to 10.2.0.4 patch 22.
The solution is to install and apply Oracle Database 10.2.0.4 Patch 29 (Windows Bundle Patch 29) or later to the RDBMS that is running the query and connecting to the Gateway.
This is detailed in the following note available on My Oracle Support -
Query Using DG4MSQL Returns Error After Upgrade of RDBMS From 10.2.0.3 to 10.2.0.4 (Doc ID 1078940.1)
Regards,
Mike

Error 'DAYOFWEEK' is not a recognized built-in function name.

hi friend I used the following query with sql server 2008 to select group by records
SELECT
sum(ljoin) as lct,
sum(rjoin) as rct,
CONCAT(DATE_FORMAT(DATE_ADD(date, INTERVAL(1-DAYOFWEEK(date)) DAY),'%Y-%m-%e'), ' TO ',
DATE_FORMAT(DATE_ADD(date, INTERVAL(7-DAYOFWEEK(date)) DAY),'%Y-%m-%e')) AS DateRange
FROM Pairs_Details
WHERE userid='jitu'
GROUP BY YEARWEEK(date)
it return the following error 'DAYOFWEEK' is not a recognized built-in function name.
But I can not get my desire result there are my following table, data and desire output which I want
Pairs_Details table definition:
CREATE TABLE [dbo].[Pairs_Details](
[sno] [int] IDENTITY(1,1) NOT NULL,
[userid] [nvarchar](50) NULL,
[date] [datetime] NULL,
[ljoin] [int] NULL,
[rjoin] [int] NULL
) ON [PRIMARY]
Example data:
sno userid date ljoin rjoin
1 jitu 2014-01-21 15:48:24.000 1 NULL
2 jitu 2014-01-22 15:48:24.000 NULL 1
3 tetu1234 2014-01-22 15:48:24.000 1 NULL
4 jitu 2014-01-24 15:48:24.000 NULL 1
5 saurbh123 2014-01-25 15:48:24.000 1 NULL
6 jitu 2014-01-26 15:48:24.000 1 NULL
7 tetu1234 2014-01-28 16:40:05.000 NULL 1
8 jitu 2014-01-28 16:40:05.000 NULL 1
Desired output: for perticular userid 'jitu'
userid | ljoin | rjoin | DATERANGE |
jitu | 2 | 2 | 2014-01-21 15:48:24.00 TO 2014-01-27 16:40:05.000 |
please any can help me.
thanks.
Jitendra Kumar Sr. Software Developer at Ruvixo Technologies 7895253402

Try below code..
SET DATEFIRST 2;
;WITH CTE AS
SELECT * , DATEPART(WW, [date]) AS week_num
FROM pairs_details
SELECT userid, SUM(ISNULL(ljoin,0)) as ljoin, SUM(ISNULL(rjoin,0)) as rjoin
FROM CTE b
GROUP BY userid, week_num
still missing date_range concatenated field.. I will get back to it... Meanwhile you can use this..
Please mark as answer, if this has helped you resolving the issue.
Good Luck :) .. Visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

List of Built in Functions

Similar Messages

Maybe you are looking for