List of client dependant and independent

Hi All,
Can any one let me knw the list of objects which are client dependent and which are not.
Thanks,
Vibha

Hello Vibha
The following list shows the client-dependent repository objects:
LIMU     FSEL     Field Selection
LIMU     VARI     Report Program System Variant
R3TR     COC1     CO: Cost Centers
R3TR     COC2     CO: Activity Types
R3TR     FORM     SAPscript form
R3TR     LODS     HRDSYS: Logical information object client-dep. table E SYST
R3TR     PCYS     HR: Transport standard personnel calculation rules
R3TR     PHDS     HRDSYS: physical information object client-dep. table E SYST
R3TR     SBNL     Logical Information Object for BDS
R3TR     SBNP     Logical Information Object for BDS
R3TR     SBNR     BDS: Relationship Between Information Objects
R3TR     SBPL     Logical Information Object for BDS: Bid Invitation
R3TR     SBPP     Physical Information Object for BDS
R3TR     SBPR     BDS: Relationship Between Information Objects
R3TR     SBRL     Logical Information Object for BDS
R3TR     SBRP     Physical Information Object
R3TR     SBRR     BDS: Relationship Between Information Objects
R3TR     SBSL     Logical Information Object for BDS
R3TR     SBSP     Physical Information Object
R3TR     SBSR     BDS: Relationship Between Information Objects
R3TR     SBTL     Logical Information Object for BDS
R3TR     SBTP     Physical Information Object
R3TR     SBTR     BDS: Relationship Between Information Objects
R3TR     SBWL     Logical information object for BDS
R3TR     SBWP     Logical information object for BDS
R3TR     SBWR     BDS: Relationship between information objects
R3TR     SRHL     SRM: Hierarchical Lists
R3TR     SRLD     Language-Dependent Client-Specific Retrieval Index Objekt
R3TR     STYL     SAPscript Style
In contrast to client-independent repository objects which can be imported into any client these objects must be transported into their specific target client.
Regards
Uwe

Similar Messages

Hi abapers doubt in client dependent and independent

i am having a doubt could you please explain me
i created a dependent table using mandt in client 100(development).
if transfered this table to quality 110(quality). it is possible access data?
when i see development 100 it's having data but i can't find any records in quality it's not showing the records.
how we can see data in quality110 , if table is dependent.

Hi Sayeed,
Data in the table will only we transported accross a system landscape if you have marked the recording routine in your development system.
Regards,
John.

Differentiating Between Dependent and Independent Data

HI,
How can I make a differentiation between dependent and independent data?

HI,
If you double click a Transfer requirement in SE10 or SE09 and then press F4 in the field category, you will find some helpful information.
Client dependent or independent transfer requirements include client specific or cross client objects in the change requests. Workbench objects like SAPscripts are client specific, some entries in customizing are client independent.
If you display the object list for one change request, and then for each object the object attributes, you will find the flag client specific.
If one object in the task list has this flag on, then that transport will be client dependent.
You can also find a list of the high class objects in SAP, here you will see the flag on/off. Use TCODE SOBJ.
Start STMS and double click on the request itself, you will see which type of request it is (Workbench -> client independent or Customizing -> client dependent).
I recommend you to import every request on each client without looking inside the request.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.

Sapscript is a client dependent or independent?

sapscript is a client dependent or independent?how we can downlod sap script?plzz tell
Edited by: Alvaro Tejada Galindo on Feb 12, 2008 10:17 AM

Hi
sapscript is client dependent.
Use ABAP program: RSTXSCRP
It will download and upload your sapscripts as a text file in your local harddisk.
copy SAP Script from one client (512) to client (500).
Login to Client (512)
Goto SE38 or SA38 and execute the abap program: RSTXSCRP
Mode : EXPORT
Login to Client (500)
Goto SE38 or SA38 and execute the abap program: RSTXSCRP
Mode : IMPORT
or
Login to Client (500)
Goto SE71 - Click Utilities - Copy from client
Edited by: Jyothsna M on Feb 12, 2008 4:21 PM

Activity Dependant and Independant Cost in real time scenarios

Hi SAP Gurus,
I know what is activity Dependant and independant costs. But i would like to know in the realtime scenario what are the costs that would be treated as activity dependant costs and how thay will be handled.
You answer would be suitably rewarded with points
Thanks in advnace

Hi
In real time based on client practices, the cost/activity plan will be based on activity dependant cost.
ex: There is Quality control department and it carries out testing of the products.
now, to get plan/budgeted cost/activity, we can choose the requied cost elements to be planned for the period.
like:
the cost elements are
QC cost elements
Salararies & Benefits
Indirect Materials
Indirect Expeneses
and fixed expenses
for above cost elements we do cost/activity dependant plan and calculate the cost per i hour of testing based on parameters.
Regards
Laxmiprasad

XI Repository objects client dependent or independent

Hi All,
As our XI installation is specific to perticluat client
I have the following doubt.
XI repository objects are client dependent or independent.
Venu.

Hi Sravya,
Thank u very much for responding.
Here i Suggested my basis gui based on the suggestions earlier i got from this post.
I suggested the following things.
1) Install 3 instances DEV/QAV/PRD one clinet in each of the instance..
2) For the question they have raised regarding my IR/ID objects Client Dependent / Independ, I answerd both are client Independent and we can transport the objects from one instance to another.
3) here the confusion for them is if they are client independent , if we do change in ur objects that might effect in other instance objects since they are client independent. I told them unless we transport the objects from one instance to other there would not be any problem.
Please confirm my answer. and suggest.
Thanks,
venu.

Are risks client dependent or independent in GRC 10.0?

Hi Experts!
My bosses has a question:
Are risks client dependent or independent in GRC 10.0?
Logically I would say client dependent, but they need a much official answer.
Could you please someone give this info, who has an installed system.
Thanks for your help!
Peter!

Hi if you're referring to risks generated after analysis 'YES' it's client dependent, basically you analyse risk against the user/role assignment. If you're talking about the risk for initial load I've no system to check but since they're considered as database table entries from technical standpoint, they're client dependent objects only.
Regards,
Asok Christian

Client dependent and client independent in ALE

I am going through pdf learning of an ALE scenario,i couldnot get wat is meant by client Independent and client dependent.
How can i conclude
Create message type (WE81){color:green} Client independent {color}
To create a new message type, follow these next few steps:
u2022 Enter transaction WE81 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Create logical message type)
u2022 Choose Create logical message type by double clicking on it
u2022 Click on change icon to enter change mode
u2022 Click on New entries to add a new type
u2022 Enter the required message type, in our case it is ZINVRV and an appropriate description
u2022 Save and exit.
Your message type has now been created. The next step will be to link it to the IDoc.
2.2.1. Link message to IDoc type (WE82 & BD69) {color:green} Client independent {color}
To link the message type to the IDoc type follow these next few steps:
u2022 Enter transaction WE82 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> EDI: Message Types and Assignment to IDoc Types)
u2022 Click on change icon to enter change mode
u2022 Click on New entries to create the link
u2022 Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
u2022 Save and exit
u2022 Enter transaction BD69 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Assign message type to IDoc for ALE)
u2022 Click on change icon to enter change mode
u2022 Click on New entries to create the link
u2022 Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
u2022 Save and exit
Your IDoc is now linked to your message type. We still need to link object types and add the message to the model before we can use the message.
2.2.2. Maintain object type for message type (BD59) Client independent
The ALE objects are used to create links between IDocs and applications objects, to control the serialisation, to filter messages in the customer model and to use listings.
For our own message type and IDoc you must maintain object types for the links.
If you want to check the serialisation for the message type, then you must maintain object types for the serialisation. If no serialisation object has been maintained for a given message type, then the serialisation will not be checked for this message type.
To add an object type to our message type, follow these next few steps:
u2022 Enter transaction BD59 (ALE -> Extensions -> ALE object maintenance -> Maintain object types)
DOC NAME: ALE_SCENARIO_DEVELOPMENT_PROCEDURE
Version 1 Page 6 of 16
ALE Scenario Development Guide
u2022 Type in your message type ZINVRV and press enter
u2022 Click on New entries
u2022 Enter your object type, LIFNR (We need to use the vendor as a filter object), the segment name where LIFNR resides, Z1INVRV, a number 1 for the sequence followed by the actual field name LIFNR
u2022 Save and exit.
You have now created an object that weu2019ll use as a filter object in the customer model to direct the flow of messages to the various logical systems based on the vendors in the filter of the message type ZINVRV.
We now need to add our new message type to the distribution model.
2.3. Configuring the Distribution Model
This task is performed on your ALE reference client.
2.3.1. Manual Configuration (BD64) {color:green} Client dependent {color}
To manually configure the customer distribution model, read the ALE configuration procedure, and follow these steps:
u2022 Perform the Maintain customer distribution model directly function. (ALE -> Distribution customer model -> Maintain customer distribution model directly)
u2022 Specify the customer model you want to maintain and the logical system that is to be the sender of the messages OR create a new model. (Create model ALE with logical system ALELS1C400)
u2022 Choose the receiving systems to which the sending system must forward message type ZINVRV to.
u2022 For each receiving logical system allocate the message type necessary for communication to the receiving systems as per ALE configuration procedure.
u2022 Create filter objects (in our case LIFNR as the object type with the associated vendor number, 0000018001 with leading zeros, in the object area) for the message types.
u2022 Save the entries.
Refer my query within color:green
Edited by: aditya sharma on Jul 14, 2010 12:57 PM
Edited by: aditya sharma on Jul 14, 2010 1:01 PM

A client is an independent business unit within an R/3 System, Data in the R/3 are classified as cleint-Dependent and client-independent.
Client-independent data such as ABAP Programs, R/3 repository objects throught the entire system. Other data is client-dependent. meaning, it can be viewed from one client. Cleint-dependent data includes customizing application and user data.
Eg.
Scripts are client dependent, means the changes done to SAP scripts in particular client will not be reflected in other client.
Smartforms are client independent, means changes done in one client will be reflected in all the clients.
Server : ECC6
Client : 100 , 200 , 300 , 400
Now suppose you have developed report in DV server client 100.
Then you will be able to see that in all clients.
Hence this is called as client independent. You can change anywhere and changes will be reflected to all ...
Now suppose you have developed a script in DV client 100.
You will not be able to see that in client 200 or 300 or 400 unless ytou copy that from client since it is client dependent.

What exactly is the diff between client dependant and client independant te

Hi gurus,
What is the diff between client independant and client dependant term.. I initially had a confusion related to client independant and client dependant Transport requests, where else are these words applicable, do they apply to data as well, if so how? any links to help me understand the difference..
regards,
kishore

Hi Kishore,
Client Independant: These objects are not specific to any client. And it is universal which can be viewed,changed across the clients.
Client Dependant: These are the objects can be viewed, changed for the client for which it has been assigned. Other clients do not have access on these objects.
In SAP, all objects are finally stored as tables. "Mandt" is key field which determines whether the object is client dependant or not.
Client Independant transport requests will make the transported objects available across the clients. and Client dependent transport request make the objects available only for the client mentioned by field "Mandt"
Regards,
Dinesh D

Client depemdend and independent

Hi,
What is client depemdend and client independent in sap
Regards
venkataswamy

Hi,
Workbench is client independent....customizing is client dependent.
If you are changing some objects which will reflect all the clients in one instance---these called as workbench req
If you are cusomizing something which will effects only in working client----these called as customizing req
Regards
Nick Loy

Planning dependent and independent requirements in DP

Hi,
We have a material A here that has a BOM defined. The components of the BOM are all dependent on the initial material. There are some cases where theBOM is recursive, meaning that the components of BOM could include material A. Now, I also have some more components that are infact independent of this material but are necessary for material A but it's dynamic. How do I plan this scenario in DP?
I think DP-BOM does the dependent requirements planning for the material A.
How do I plan for the dynamic components? I have some history on how they are generally consumed. So, should I plan them separately, I mean the material A along with the dependent components and the independent dynamic no. components? But the problem, I am guessing, comes up when we forecast more of the independent components and plan fewer for this month....Can somebody suggest me something?
I think I am correct in going for DP-BOM instead of CBF as I donot have variants involved here. Please correct me if I am wrong, we use DP-BOM when we need to plan on simple BOMs (no variants, multiple BOMs etc.) and use CBF in case we need to deal with variants involving characteristics.
Any suggestions are highly appreciated.
Thanks.
Message was edited by:
Visu Venkat

the realignment will depend on the realignment table. So if you devise a way to keep that as dynamic as your changes in the components you should be able to do that
there are quite a few ways you can achieve your means... the realignment thought occured because i was posting another answer on it
am sure there will be other issues we havent foreseen that might arise when you actually try it
here is another alternate you might want to try.... just some more vague thought....
if you are on SCM 5 (if you are on another version there are other ways of doing this)
1. create CV Cs based on a worklist that lists the dynamic components ... (you can automate this if you want - as long as there is a reference spreadsheet)
2. Create a selection profile that has the Main component and the dynamic components (lets assume there are 3 components and this will be a 1:1 ratio with the main productA)... now the total of the forecast for this selection profile will be say 100
2. Run a macro that will multiply the forecast with the number of products in it (so 100*4) . this will make the forecast 400
3. If you have set a disaggregation on the forecast KF that is equal distribution (this may not be the case in your business scenario) you will get 100 on each of the selections
am sure there are a lot of holes in this that can be plugged or variations worked on... depends what works easier for you...and the amount of maintainance and data involved ... it will all boil down to the business process

Dependent and Independent Requirements

Hi Gurus,
Please tell the table and field name for Dependent & Independent requirements.
Regards,
Senthil.K

Hi,
Thanks
I fouond the logic for Independent requirements.But I can't get the Dependent Requirements.In Table PKSL very less fields only available.Please give the logic.
Regards,
Senthil.

Instance dependant and independent

Hello
I cannot access the method getDetail() in Purchase order BAPI. It shows an error [" GetDetail on type _Com Object not found "].But I can access the method getItems() in the same BAPI (Both are tried from VS .NET 2003 ). In SAP GUI I noticed that getDetail() is instance dependendnt and getItems() is instance independent . Is this the reason for showing the error ? Can any one of you tell me the difference between Instance dependant BAPI method and Instance independent BAPI method. and how i can solve this issue
Thanks in advance

Hello
I cannot access the method getDetail() in Purchase order BAPI. It shows an error [" GetDetail on type _Com Object not found "].But I can access the method getItems() in the same BAPI (Both are tried from VS .NET 2003 ). In SAP GUI I noticed that getDetail() is instance dependendnt and getItems() is instance independent . Is this the reason for showing the error ? Can any one of you tell me the difference between Instance dependant BAPI method and Instance independent BAPI method. and how i can solve this issue
Thanks in advance

Multiple Dependent and Independent Samples

Hi,
Can anybody explain about Multiple Dependent Samples and Multiple Independent Samples with proper Examples?
Regards,
Raj

dear Raj
Multiple Dependant Samples,
Suppose you have sampling scheme in which the lot size is 10, sample size is 5. acceptance number is 1 and rejection number 4.
Now during RR you found that 2 values are ok and 3 values are not ok. So the system is in confusion because it requires 4 to reject. So system proposes you another sampling plan by which you can further do testing and record the results. The defects get cumulated and is then valuated. you can do this 7 times. For this you need to maintain c1,d1,c2,d2 ,c3,d3 for the same sample size
Hope this helps
Regards
gajesh

ALE client dependent or independent

Hi All,
We are using client 100 for development, 200 for config and 300 for test. If I configure ALE in 100, can I transfer data from 200 and 300 also or can i do it only from 100 and I need to configure the same in 200 and 300.
Thanks.

Hi,
ALE is a combination of RFC connections and Port and configuration..
so genrally configuration need to done on each and every systems or clients.
Prabhudas

List of client dependant and independent

Similar Messages

Maybe you are looking for