List of Components for SAP ECC 6. 0 EHP4 NW 7.01

Hi Experts,
How to find the list of components for SAP ECC 6. 0 EHP 4 NW 7.01.
Regards,
IFF

Hi,
Two ways I could think of:
- Best would be goto http://service.sap.com/pam -> search for ERP 2005 EhP5 and check in the "Included components for <technical usage>" section. For this you would need to know the scenario for which you need ERP 2005 EhP4
- If a solution manager is available, goto tcode SMSY -> Product Definitions -> SAP ERP ENHANCE PACKAGE and select EhP4.
Regards,
Srikishan

Similar Messages

Disaster Recovery For SAP ECC 6.0 On Oracle

Hi All,
This is our infrastructure
Windows 2003 Server
SAP ECC 6.0
Oracle 10
Legato Networker Client / Library
Actually our Backup Strategy is to do an Online Backup Every Night from monday to saturday. We want to test our backup by doing a Restore. We are assuming a complete loss of the system including hardware.
What we do:
1. Install the SAP System on a new host with the same hardware characteristic of the source system.
2. Install & Configure the legato utility.
3. Copy the E:\oracle\MIS\sapbackup\ directory from the source system to the test system.
4. Them we put the database in mount mode.
5. Execute the command: brrestore -b bdyxwoqv.fnf -m full (bdyxwoqv.fnf-> Full Online Backup that was executed without problems).
It gives the following errors:
BR0386E File 'F:\ORACLE\MIS\SAPDATA2\SR3_10\SR3.DATA10' reported as not found by
backup utility
BR0386E File 'F:\ORACLE\MIS\SAPDATA3\SR3700_9\SR3700.DATA9' reported as not foun
d by backup utility
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0279E Return code from 'backint -u MIS -f restore -i E:\oracle\MIS\sapbackup\.
rdyybrzp.lst -t file -p E:\oracle\MIS\102\database\initMIS.utl': 2
BR0374E 0 of 63 files restored by backup utility
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0231E Backup utility call failed
BR0406I End of file restore: rdyybrzp.rsb 2008-10-01 17.45.19
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0404I BRRESTORE terminated with errors
Since this is a new SAP system it never will find the SAPDATA files because they where on the source system and this is a new test system.
We found the following note:
96848 Disaster recovery for SAP R/3 on Oracle
But this note is for SAP R/3 no for SAP ECC!
It explain that you have to install your SAP system with the System Copy Method (is this the only way??).
2.) Installation of the R/3 System
The installation of SAP software contains the software installation of the database. The initial SAP database should be created again but the SAP data should not be loaded.
Install the SAP system with the Oracle-specific system copy method, which is based on backup/restore. This method is described in the system copy guide for your Product/Release. Refer to Note 659509 for products that are based on Web AS.
3.) Modification of the installation
Above all, you must take into account the mounted file systems at the time of the loss. If necessary create new SAPDATA directories (mount points). These generally identify a disk or a logical storage area (logical volume).
Are we working in the right way? maybe there is a formal procedure to do a Restore from an Online backup when you complete loss your system.
Please some tips.
Best Regards,
Erick Ilarraza

Hi Eric,
Thanks a lot for your reply, I will follow the Note 96848 Disaster recovery for SAP R/3 on ORACLE point 5.
5.) Restore profile and log files, as you sayed in case of disaster we will lost our "source" system.
On the other hand to configure the legato client we take care of the name of the server, we configured the .sap, .cfg and .utl files so in theory the restore will be done on the new test system since we run the brrestore command from that system.
Officially there is not a documentation from SAP to do a Restore from a Online Backup with SAP ECC, SAP Netweaver (ABAP / ABAP + Java). You only have the 96848 note??? I found the following information:
http://help.sap.com/saphelp_nw70/helpdata/en/65/cade3bd0c8545ee10000000a114084/frameset.htm
But there is not a official procedure like a System Copy Guide or Installation Guide.
Best Regards,
Erick Ilarraza

Sql Server configuration requirements for SAP ECC 6.0

Dear All,
I am using Sql server 2005 Enterprise as data store for Sap ecc 6.0.There are certain configuration requirements to be done while installing it so that sapinst.exe (sap installer) is able to use it to create its own DB's.
For eg it requires a collation of SQL_Latin1_General_CP850_BIN2 whereas the default that gets installed is SQL_Latin1_General_CP1_CI_AS.
Like this there are other requirements which I am not aware of.Most of the docs available on the Internet are talking of ecc 6.0 with Oracle 10.2G which is the most common combination.I am having docs for this combination.
I am installing ecc for the first time.
*I am unable to download docs from sap. marketplace as it requires a login given to certified users or sap purchasers.I am neither.*
Can anyone help me with this.If anyone has ECC 6.0 installation guide with sql server it will be serve my purpose.
Thanks for your efforts.

"Excuse me?
What he is doing is illegal , you know what that means, right? If you don't believe me, read the license that comes on the first installation DVD.
Actually, I even think it's kind of barefaced to ask in the forum of the software vendor for help! I mean, it's like asking in a bank forum how to rob and fraud the bank! You - and many others - may think that it's right and ok to do that. I tell you: it is not. Not for "home use", not for personal use, not at all.
You can use the software available here in the SDN to lean and study, that's why it's there.
If you deal at all with copied software, then just be smart enough to make other people not notice. He can be happy if he's not prosecuted (which would legally be possible)."
Do u understand what is legal or illegal? Have u read the license in full?
The license does not put any limit on the number of users.So if I am using it means that one more user has been added by the license holder.
Therefore there is nothing illegal about it.
It would have unethical (not illegal) if the software is being used for a business purpose other than for which it has been purchased.
Since it being used for training purpose the above does not hold good.
In fact it is SAP who is benefited in the long run bec' after a person learns it technology because he is going to implement it somewhere, for which the concerned user will have to purchase a license.Therefore I am helping SAP to increase its business.
But there are some stupid people who don't understand these things but are ready to shout at the top of their voice thinking themselves to be intelligent.
Edited by: coolmind26 on Jun 5, 2011 10:57 AM

File system for SAP ECC, EP , BI and CRM installation on Solaris/DB2

Hello,
We are going to implement SAP ECC 6.0 with EP 7, BI and CRM on Solaris operating system with IBM DB2 database.
All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
If anyone able to help me with required Solaris file system. it will be great help.
Please let me know if there is any query.
Thanks.

> All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
> But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Why not using Solaris zones/container? This decreases the administrative amount tremendeously since you will deal as with "single machines" but they all run together on one box.
> Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
So you'd need to read the installation guides
Markus

SX_OBJECT_CONVERT_OTF_PDF for SAP ECC 6.0

Hi all,
     The function SX_OBJECT_CONVERT_OTF_PDF is different for SAP ECC 6.0.
     The parameters are as below:
      IMPORTING
*"     VALUE(FORMAT_SRC) TYPE SX_FORMAT
*"     VALUE(FORMAT_DST) TYPE SX_FORMAT
*"     VALUE(ADDR_TYPE) TYPE SX_ADDR_TYPE OPTIONAL
*"     VALUE(DEVTYPE) TYPE SX_DEVTYPE OPTIONAL
*"     VALUE(FUNCPARA) TYPE SX_FUNCPAR OPTIONAL
*" CHANGING
*"     VALUE(TRANSFER_BIN) TYPE SX_BOOLEAN
*"     VALUE(CONTENT_TXT) TYPE SOLI_TAB
*"     VALUE(CONTENT_BIN) TYPE SOLIX_TAB
*"     VALUE(OBJHEAD) TYPE SOLI_TAB
*"     VALUE(LEN) TYPE SO_OBJ_LEN
*" EXCEPTIONS
*"      ERR_CONV_FAILED
Anybody know how to used this function?
Thanks
Regards,
Kwchan

Hi Chan,
Check the following piece of code:
    data transfer_bin type sx_boolean.
    data:li_pdf_data type w3mimetabtype.
    data objhead type soli_tab.
    call function 'SX_OBJECT_CONVERT_OTF_PDF'
      exporting
        format_src      = 'OTF'
        format_dst      = 'PDF'
        devtype         = 'ASCIIPRI'
      changing
        transfer_bin    = transfer_bin
        content_txt     = li_otf_data
        content_bin     = li_pdf_data
        objhead         = objhead
        len             = l_size
      exceptions
        err_conv_failed = 1
        others          = 2.
Regards,
Ravi

Linux version for SAP ECC 6.0

Dear all,
Please help me in finding the suitable Linux version for SAP ECC 6.0 version.
Thanks & Regards
Tavargeri Ganesh

SAP on Linux
--> Supported platforms
Markus

Disaster Recovery server for SAP and HACMP Cluster script for SAP ECC 6.0

Hi,
I need document for Disaster Recovery server for SAP? I have to configure the DR Server If you have, please share this document if possible.
Have you any cluster script ( HACMP Cluster script for SAP ECC 6.0 ) ?
Thanks & Regards,

Hello, I'm doing a "Plant ECC6 to do a test disatre / Recovery.
During the installation, I would use the same <sidadm> existing as it is in the PRD.
If I tell you to install it during the same <sidadm> it will overwrite what already exists, or do I just enter the password of existing <sidadm>?

License Key Request from SOLMAN VS SMP for SAP ECC 6.0 EPH4 IDES install

Hi, SDN fellows.
I have some doubt on the right way/options to request License Key for SAP ECC 6.0 EPH4 IDES.
Previously, I read that the only way to get license key is to generate it through SAP Solution Manager. If this is the only way, we will have to install Solution Manager just to generate the license key (we are currently don't have SolMan running in our landscape).
I also read that I can request license key through http://service.sap.com/licensekey. I checked the link and see that we have the 10 digits installation number for Product: SAP ERP.. Currently there is no system defined for this installation number.
I went through the first two screens, seems like they have options for SAP ERP 6 --> IDES.
If I can get a license key from http://service.sap.com/licensekey, do I still need to install Sol. Man. to generate the license key?
What are the difference the license key generated from Sol. Man. VS the one we request from SMP?
Thanks,
KC

Hi, Vishnu.
So, now I understand I need two keys: Solution Key and also License key.
I should obtain Solman key before I start installation , as the SAPinst will ask to enter Solman key before it can proceed to install SAP ECC IDES.
You said I can obtain Solman key through OSS note. I went in to SMP just now. Navigated to Help& Support --> Report a Product Error --> New Problem Solving Request.
I selected Customer Number, Product, Instillation # , and enter * for System ID. The search result returned no system found. The problem here is we don't really have any system ID defined for SAP ERP IDES since we haven't start installing the system.
Is that true that I will only see the System ID in OSS Message interface when I submit the System ID for the license key?
I thought this is a post-installation step to apply for a license key. If I can to do it before the installation, how can I get the 11 character hardware key before installation (assuming I cannot run the SLICENSE TCode and saplikey u2013get command)?
OR how can I create OSS message to request SolMan key when I don't have a system ID (that already registered for license key) in SMP?
OR I should just go ahead to install Solution Manager to generate Solman key (during pre-installation), and request for license key in SMP in post-installation?
Thanks for advise,
KC

What oracle edition required for sap ecc and ep in one box

hi friends
what oracle edition required for sap ecc installation which supports the HA and disaster recovery plan
10g
1. Oracle Database Standard Edition One 10 g
2. Oracle Database Standard Edition 10g
3.Oracle Database Enterprise Edition 10g
3. Oracle Database Express Edition 10g
4. Oracle Database Personal Edition 10g
thanks in advance friends
regards
raja

hi,
I believe that SAP only support enterprises edition one because you'll get all database features.
ardhian
http://sapbasis.wordpress.com

Error in PHASE PREP_EXTRACT/PREIMP: Upgrade SAP R/3 4.7 to SAP ECC 6.0 EHP4

Hello,
I'm currently in upgrading a SAP R/3 4.7 system to a SAP ECC 6.0 EHP4.
Therefore I followed the Upgrade Guide from marketplace - installation- and upgrade guides - SAP ERP - SAP ERP 6.0 - SAP Enhancement Package 4 for SAP ERP 6.0 - Upgrade Guide SAP ERP including EHP4 SR1 - Unix on MaxDB.
I downloaded media from marketplace/swdc - Installations and Upgrades - SAP Application Components - SAP ERP - SAP ERP ENHANCE PACKAGE - EHP4 FOR SAP ERP 6.0 / NW7.01 - Upgrade.
I'm starting upgrade with upgrade master DVD 51036889_1 and      51036889_2.
Now upgrade breaks down in phase PREP_EXTRACT/PREIMP with error:
Severe error(s) occured in phase PREP_EXTRACT/PREIMP!
Last error code set: Single errors (code <= 8) found in logfile 'PREIMP.ELG'
PREIMP.ELG says:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
R3trans preimport and RETURN CODE in R710VPE.REX
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
Kernel is stored in /usr/sap/REX/SYS/exe/run and database is ADA (maxdb).
File R710VPE.REX says:
4 EPU201XBEGIN OF SECTION BEING ANALYZED
4 ETW000 R3trans version 6.13 (release 640 - 17.02.10 - 13:07:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 07.03.2011 - 15:28:36
4 ETW000 control file: /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 > import
4 ETW000 > file='/usr/sap/REX/upg/abap/bin/R710VPE.SAP'
4 ETW000 > safeandslow=yes
4 ETW000 > buffersync =yes
4 ETW000 > commit     =1048576
4 ETW000 > importtruncated =yes
4 ETW000 R3trans was called as follows: R3trans -w /usr/sap/REX/upg/abap/tmp/R710VPE.REX -u 1 /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 active unconditional modes: 1
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
4 EPU202XEND OF SECTION BEING ANALYZED
Can anybody help me out here?
Regards,
Julia

Hello,
I run 'R3trans -x' command, but there was no problem - connection to database was working.
Problem was following:
Before starting the sdt service on host, I set environment variables JAVA_HOME and LD_LIBRARY_PATH for sidadm. That's not neccessary and that was the problem. Without setting these variables it is working now.
Thanks,
Julia

SAP ECC 6.0 EHP4 Compatible with MDSD 3.0?

Hi Folks,
Is SAP ECC 6.0 EHP4 compatible with MDSD 3.0? I have read the documentation but its not clear for me if this would be possible.
It says that MDSD 3.0 is compatible with SAP ECC 6.0 EHP3, but i would like to know if compatible with EHP4.
Thanks for your help.
Regards,
Gilberto Li

Hi Gilberto,
yes, this should work fine. We just have one client who did the upgrade and he has not experienced issues up to now - even he is still in testing phase.
Regards,
Oliver

BO Install Components for SAP

Dear Friends,
We have SAP BI 70 up and running. Our new requirement is to install BO compoenets and link it back to SAP.
Could you please help with the following:
> What are the componenets are needed for to install BO? Are the following good enough, or I have listed too many, or few components are missing?
      - BusinessObjects Enterprise XI 3.0 - WIN - INTL,
      - Crystal Reports
      - Xcelsius
      - Profitability and Cost Management
      - Financial Consolidation
      - Designer
      - Desktop intelligence
      - Query as web service
      - Query Builder
      - Universe Builder
      - Web Intelligence rich client
> Are the above compoenets need to be installed seperatly or one main installation will give us all of the above componenets?
> Can we download the software from SAP Marketplace or we have to download it from Business Object official site?
> Do BO installation need any database installation as well? Our's is Windows 2003 environment
Thank you,
Nikee

Hello Allan,
Thank you for the response. We have purchased BOE Premium licenses.
Few more quick questions....
> Can we install these components on WINDOWS 2003 64-bit OS or we have to install few componets (like Microsoft IIS) on 32-bit and few components on 64-bit?
> What are the components do we need from SQL point-of-view?
                   - SQL SERVER 2005 Enterprise Edition
                   - Analysys Server (OLAP)
                   - Reporting Services
> Please let me know the sequence of the installation components?
                   - SQL DB Install
                   - BusinessObjects Enterprise XI 3.0
                   - BO Sap Integration Key XI 3.0
                   - Crystal Reports
                   - Xcelsius
                   - Client Tools
> We have the following links on SAP MarketPlace...I don't see a link to download the BusinessObjects Enterprise XI 3.0, Crystal Reports, Xcelsius, Client Tools and so on...
BusinessObjects packages and products
      Ad-hoc Querying package
            BOBJ INTGR. FOR SAP XI 3.0
      Enterprise Query, Reporting, and Analysis package
            BOBJ INTGR. FOR SAP XI 3.0
      Financial Performance Management package
           BOBJ INTGR. FOR SAP XI R2
           BOBJ INTGR. FOR SAP XI 3.0
     BOBJ EDGE INTEG. FOR SAP SOL.
     BOBJ INTGR.FOR SAP
Thank you,
Nikee

MessageBox on Adobe Form in SAP MSS PCR for SAP ECC 5.0

Hello,
I have a question regarding the behavior of Adobe form messagebox in SAP HR MSS PCR (Personal Change Request)
I tried to test how the messagebox looks like, and so I created a PCR scenario with an Adobe form. This form contains a datetime field. I added the script "xfd.host.messageBox("this is message", "this is title") to the "exit" event of the datetime field. Then I did all the necessary steps so that this PCR is displayed in the Portal.
Now at the runtime, when I select a date value from the datetime field, the messagebox is displayed, BUT within an empty Adobe Reader page. It is not displayed on the top of my adobe form.
But the strange thing is that when I use tab key to navigate through the datetime field, the messagebox is displayed on the top of my adobe form, without the empty Adobe Reader page.
I also tried my script with several different event types, including "Change", and "Validate", it behaves the same way. But when I tried it with the event type "MouseExit", no empty Adobe reader page is shown up at all (of course, this is not the right event type for me)
The environment is SAP ECC 5.0, SAP MSS business package for ECC 5.0, SAP Portal 7.0 (NW 2004s), Adobe LiveCycle 7.1, and Adobe Reader 8.1.1
Has anyone experienced this? I'd really appreciate any comments and suggestions. Thanks in advance.
Best regards,
Harrison

Antony,
The Adobe Reader version is 8.1.1
Just wondering if you used messageBox in interactive forms with ISR framework, and it worked well for you?
Thanks.
Harrison

Logical system names after system copy for SAP ECC 6.0

Hi!
We successfully installed SAP ECC 6.0 system as system copy.
All the logical system names of old system have been copied to new system.
Question
What is the approach to change the logical system names for new SAP system?
a) just via tcode SCC4
b) via BDLS
c) other tcodes, reports
Thank you very much!
regards
Jürgen

I think you can do it through BDLS

Reg: Replacing i-way with PI for SAP ECC 6.0 version

Hello Experts
currently we are using R/3 4.7 version and middle ware we are using is i-way and we are planning to upgrade to ECC 6.0 and i would like to know how compatible is i-way is with SAP ECC 6.0 and is there any neccessity to replace the same with PI.
and currently we are using RFC as a method of communication between R/3 and i-way and in future i don't want to change the existing coding , is it feasible to use PI via RFC.
As i am ABAPer, i am new to this PI and please let me the know the risks involved and it is viability.
Thanks and Regards
S.Janagar

Hi Gavin,
you should always use the SQL EE for SAP installations (because of additional features that only come with EE).
Concerning SQL 9 or SQL 10, I would definitely go for SQL 10. It has some nice features like Backup Compression, Page/Row Compression and so on. Have a look [here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a236a2-8104-2b10-5ebe-8fef61cc82fd]. Just make sure that your installation meets the SR3 requirements.
We already have SQL 10 in production and did not encounter any problems.
Regards,
Sven

List of Components for SAP ECC 6. 0 EHP4 NW 7.01

Similar Messages

Maybe you are looking for