List of creative sound cards that support 5.1 ,older and new

Title says it all as I'm looking to purchase(new or used) creative 5. sound card. I'm unsure as to what older models support 5.,it's for a friend and I want to make sure he gets the right one.Li've,Audigy or other?I don't need one with all the bells and whistles just one that supports 5.. Thanks.

I'm afraid 11b is affected.
I have a D-Link DSL 604+ router, which is 11b only.
Wireless is very slow, I noticed it right away. I get the sawtooth readout in activity monitor's network section.
Also, after putting the iMac to sleep it cannot find my wifi network upon waking. I have to restart the system before it'll connect to my wifi network again.

Similar Messages

  • A problem with ALL creative sound cards i am hav

    All creative sound cards that i've used, three i think in the past year. SB Li've, SB Audigy 2 ZS, and the Audigy 2 Zs Platinum Pro. Every time i connect speakers or headphones to the jack, i get really REALLY low sound output, also before windows loads or shuts down i hear a "bump" coming from my speakers/headphones.... I have no idea whats going on....
    Specs are:
    p4. 3.0
    DFI Lanparty 875 rev. B
    gig corsair pc4000 dual channel
    2x raptor raid 0
    SB Audigy 2 ZS Platinum Pro
    ATI Radeon x800pro
    Headphones i use are bose acoustic 2 headphones
    Speakers are logitech x-530
    If anyone has had this happen to them before or if anyone has any possible remedies for this I would really appreciate, if this doesnt help im done with creative sound cards =/
    [edit]: forgot to mention this is only for the audio jacks on the sound card itself, on the ZS platinum pro, when i connect to the jack on the hub, the sound is alrightMessage Edited by mrkuku on 06-2-2005 06:36 AM

    figured out my problem, my built in sound card drivers were conflicting with the creative drivers. Thought that if i turned off the built in sound card from bios that i wouldn't need to delete the drivers also. Thanks for any that read this and tried to figure it out. Now its working like a charm.

  • Can't find drivers for SB0410 SBLive! 24 bit sound card that came with Dimension 8400

    I cannot find the sound card drivers for Model SB0410 (SB Live! 24 bit) sound card that came with a Dell Dimension 8400...   the update is on the Dell website and the Creative Labs web site- but not the original drivers.
    This peripheral is not recognized by WinXP Home.  No "Drivers or Utiiltes Disc" were included in the original shipment of the computer either....
    I Googled and searched the Internet- cannot find drivers, whatsoever.
    What's next?

    This it the right drivers and programs for the Creative Sound Blaster Card ( Sound Blaster Live! 24-bit Internal) that came in the Dell Dimension 4700 as far as a can tell. It worked for me doing a fresh install of Windows XP Pro on a Dell Dimension 4700 computer:
    http://support.creative.com/downloads/welcome.aspx?nLanguageLocale=1033&nOS=10&nDriverType=1#type_1
    File Name : SB24_VTDRV_LB_1_04_0077.exe
    This suite of drivers and applications has been updated and combined for your convenience. It installs the following applications to control your audio device's settings. For more details, read the rest of this web release note.
    Applications included in this release:
    Creative Audio Console (for Windows Vista™ only)
    Creative Device Control
    Creative EAX Console
    Creative Speaker Settings
    Added Features or Enhancements:
    Enables 44.1 kHz sampling format for SPDIF In and Out.
    Requirements:
    Microsoft® Windows Vista 64-bit, Windows Vista 32-bit, Windows® XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004 
    Sound Blaster® Audigy® Value/SE/LS, or Sound Blaster Live!® 24-bit audio devices 
    Notes:
    This pack is only for the Creative Sound Blaster audio devices listed above.
    DO NOT install this pack for Sound Blaster Live! 24-bit External.
    To install this pack
    Download the file onto your local hard disk.
    Close all other Windows applications.
    Double-click the downloaded file.
    Follow the instructions on the screen.

  • Sounds cards that allow passthru to SP

    Running VISTA RTM - I have a Li've!24 and have installed the latest beta drivers. All I want to do is pass AC3/DTS thru to the SPDIF so my receiver can decode. This is not working, so I quess the drivers are not ready. Can I get AC3/DTS pass thru to SPDIF on ANY sound card that creative sells today? If so what models. I'll buy it IF it works!!! Features are not important, (I'm not a gamer) All I want is to watch DVD's with the sound being decoded by my receiver via SPDIF?ThanksNotTheOne

    Ok, I quess I wasn't clear. I can get VISTA to output sound to the SPDIF with any of the motherboards or sound cards I listed. However, VISTA is down converting everything to 2 channel PCM first. It is not doing a straight pass-thru of AC3 or DTS. See post by Profundido http://forum.videohelp.com/viewtopic.php?t=36034?his third point, and see the discussion on the subject on the AC3filter site. http://ac3filter.net/forum/viewtopic.php?t=0. It takes special driver support for "passthru" to work. NotTheOne

  • Duriong Voice Chat Voice is not Receiving from Creative Sound Card but going correct

    Hi!
    I have recently faced a problem in my Creative Sounce Card. When i play a sound, no? sound is coming from sound card, No?error message is coming but monitor screen is displaying the sound animations in?Windows media player. I have also tested my speakers & connections and no problem found in it. I also changed the Creative Sound Card Software's settings to default but all in vain. Besides when i?unchecked?the check box ("Only Show Digital Sound") in the Creative Sound Card Software, the analog music is being received, but it is only music without any human voice. The same problem is during voice chat.
    Plz help me in this regard.
    Thanks in advance.

    There is no confusion (anymore) I'm just trying to get the word out that nobody wants to supprt these OEM cards. Not you and not Dell. Does Dell even have the rights to redistibute the apps to work with there versions of your cards? Card works, Drivers Work, No ap
    ps.
    .see my delima? Just a heads up to anyone else with this problem. I've looked to no avail for a updated set of apps for this OEM card. Really kinda anoyed by this. I mean why can't creative support there own card. I know dell bought it, but it is creative and you made money from it support it. Seems pretty cut and dried to me. Digrunteld Axe

  • Need a Esata or USB 3.0 PCI-E card that supports Server 2012. ANY card.

    I can't find any card that supports Server 2012 yet, but I really need to transfer and move 2-3TB of data on a weekly basis.  USB 2.0 + external drive is too slow.  Any other solutions I'm over looking?
    I'd like to get a Esata 6ghz and a few Esata Externals.  USB 3.0 is an option if I can't find Esata, although It's slower than I'd like.
    I'm open to any ideas.

    I ended up getting two of these:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16815201051
    Below is the review I wrote on newegg.com about the product.
    Pros: Contacted Koutech (and 5 other companies) asking what eSATA and USB 3.0 cards they had that would work in Windows Server 2012. A support tech responded that same day. Every other company still hasn't responded 2 months later. The rep said
    he hasn't tested any of their cards in Server 2012, but he would start testing and give me a product list in 2 days.
    He did exactly that. In less than 2 days I had a list of 18 different PCI-E cards that worked in Server 2012.
    I ordered two of these cards (PEU437) for my Dell Servers (T620, & T710).
    I have installed the card in the T620 Server, and the card did require the 15 pin SATA power cable in order to work properly (Instructions make it sound optional). My server didn't have any extra 15 pin SATA power cables, I had to buy a 15 pin SATA extension
    cable and daisy chain off the SATA CD-ROM drive, but it works just fine.
    I'm transferring at speeds over 170mb/s (which is the fastest I've seen on usb 3.0 thus far) My M18X, and MacBook Pro usb 3.0 seem to cap around 100mb/s. I'm going to attribute the extra speed to the ridiculous raid set up, and H710 controller card as I've
    done file replication well over 1gb/s.
    All in all, the product is working exactly as described, and tech support was amazing from Koutech.
    I will definitely purchase future PCI-E cards from them.
    And of course NewEgg pricing and delivery speed was top notch.
    Cons: Directions were slightly misleading. I interpreted them as saying the 15 pin SATA power connection were "optional" for USB drives that didn't have their own power source.
    Windows Server 2012 did see the PCI-E card with out the 15 pin SATA power connection hooked up, but it wouldn't acknowledge any USB External HDD, even if it had it's own power source.
    In most cases this isn't an issue, desktop workstations usually have an abundance of 15 pin SATA power sources... however my Servers didn't have any. I had to daisy chain off of my SATA DVD-ROM drive. The Cable wasn't long enough, so a 12" extension cables
    was needed, which I got off newegg for under 9 dollars each.
    Minor issue, and acceptable. Directions should be more clear, but that's a technology limitation not a design flaw.
    Other Thoughts: I did a Bare Metal Server Backup of slightly over 1TB of data in 1 hour and 42 minutes. A vast improvement over USB 2.0.

  • Kx-project driver for creative sound card to 2k3 as a workstat

    Hi Everybody
    maybe it also if you run as it is build to as a server i don`t no but i have use it since Februar this year with no problems at all ! here is the link :
    http://kxproject.lugosoft.com/index.php?skip=
    and here is the full list with all supported creative sound card and maybe other sound card to who no?s and the FAQ !
    http://kxproject.lugosoft.com/faq.php?language=en#cards
    Best regards
    audiogy2newbieMessage Edited by audiogy2newbie on 06-2-2005 2:6 PM

    Information is scarce for end of service life products, you might want to read about the specs here. Alternatively you might want to consider this model instead but you may need to do some searching since it's not available in the UK online store.

  • P6N Diamond - Creative Sound Card / Windows 7

    Hello everyone,
    Couldn't find anyone else with a similar issue so figured I'd post here. I'm using a P6N Diamond (obviously) and here's the issue:
    Originally this PC had Windows XP installed. When I upgrade to Windows 7 x64 Pro(1-2 months ago), my computer became unable to recognize the integrated Creative sound card. I've tried the following:
    1.) Using provided driver discs (Using Vista x64 drivers, closest match)
    2.) Downloading various Creative programs, drivers, etc. to add drivers
    3.) Checked MSI's site and downloaded various drivers, updates etc.
    None of the following worked. I primarly use a USB headset, which works perfectly. However, I'd like to be able to use speakers as well (used to be able to do it when Windows found my soundcard).
    Anyone have any ideas for resolving this? I really appreciate any help, thanks!

    If I follow you correctly, this problem only starts after you have upgraded to Windows 7, right? If that is the case, it is obviously a driver issue. Though you have tried many drivers and it seems that they are not the right ones. What you can do is to try contact MSI support and see if they can help you.
    >>How to contact MSI.<<

  • Can someone recommend me a good creative sound card for listening to music

    Hi all,
    I am thinking to buy a Creative sound card for my new PC.
    I have browsed the Creative web site but found out that there are just too many options for me to choose from, like X-FI, e-MuRecon3D Fatal1ty Champion, Recon3D PCIe, E-MU 1212M PCIe.
    I have no idea which one is the best for me since I like listening to music.
    Please give me some advice.
    Thanks
    Kitty.

    It's ultimately going to depend on how particular you are, and what output you're going to be using.
    Arguably the X-Fi Titanium HD will give the clearest output of the whole lot. A measurable 122dB SNR means you'll basically have to turn it up to the threshold of pain before you'll hear any noise produced by the card itself. That doesn't mean there won't be any noise at all in the output - just that the card realistically won't add any that didn't already exist in the source material. Further to this, when run in Entertainment mode you'll also have access to the THX enhancements over the standard Creative ones, which I personally find to be substantially better in actual listening. The EMI shield and changeable op-amps are just gravy.
    Of course, there's always fine print. The 122dB SNR only applies to the front outputs, for example. That's not to say the rest aren't very good - they're rated at between 115dB and 118dB - just that they aren't as good. Odds are you won't really care but its still worth mentioning. The other major limitation (in my opinion) is the absence of a good headphone pre-amplifier, but that may or may not be a non-issue depending on whether you use headphones or already have an external one (or, like me, you feel inclined to make your own to solve that limitation).
    The other good option would be the Recon3D. I wouldn't bother going with any of the upper market ones for music (or for any reason, for that matter) unless the front drive bay or directional microphone are of any particular importance to you (NB I bought the Fatal1ty Champion edition - still not entirely sure why). An argument could be made for the EMI shield, but with so few components on the board it probably isn't stopping a whole heap of noise anyway over the miniature "shield" on the SPU itself. When compared in raw specs to the Titanium HD, at a glance it would appear to be vastly inferior - 102dB SNR ratio (albeit constant across all outputs) is quite a bit lower, after all.
    However, it's important to keep in mind exactly what that means. 102dB SNR still means you'll have to turn the volume up quite a bit to get any extra noise added to your output. You're talking around the volume of a power saw at a little over 3 feet, so realistically it's quite loud - and it's over the level which is generally considered to cause hearing loss with sustained exposure (95dB). You also have to remember that this doesn't apply to the S/PDIF outputs (nor does the HD's 122dB) since they're entirely at the mercy of whatever decoder you're using, so if you're using that output than the extra expense of the HD is pretty much entirely wasted. And, as a major plus, all Recon3D cards have what seems to be a pretty decent headphone pre-amp, which makes a very appreciable difference in listening, as well as supporting the various THX enhancements.
    The short version:
    - If you're listening mostly via stereo analogue speakers, get the Titanium HD.
    - If you're listening mostly via headphones, get the Recon3D (I personally think the pre-amp is better than the higher SNR).
    - If you're listening mostly via S/PDIF to an external amp, it doesn't matter (but get the Recon3D because it's cheaper).

  • HELP....ne​ed a good sound card that works with Windows 7 64 bit

    I've searched the internet and I'm seeing that folks are struggling with getting sound cards to work with Windows 7 (particularly the 64 bit systems). I know there are stability issues with the 64 bit system but I'm looking to install a decent sound card to improve stereo sound from my HP Pavilion (h8-1260t). The onboard sound is OK, but I'm looking for higher fidelity and the shortcomings of the stock sound chip is noticeable when played through my hi fi system.  Don't really need 'surround sound' (I'm not a gamer) but I'm assuming any card that comes with this feature will also produce a quality stereo signal.  I also like to archive music from steaming sources and have found a significant loss of sound quality once the track is saved.  I'm assuming a good sound card will help with this.  Any advice would be greatly appreciated.

    Spauld, welcome to the forum.
    I suggest finding a sound card that you like and contacting the manufacturer's Customer Service to assure its compatibility with Win7 64-bit.  They are the experts on their products.  While I am not a fan of dedicated sound cards because their drivers are conflict prone, I would buy a Creative Soundblaster.  They have been proven over time.
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Creative sound cards and iTunes static

    Okay, after having looked through the messages here it looks like everyone who has said they are having a problem with the static/audio distortion (unless the volume slider is set to 100%) are using Creative sound cards.
    It looks like a number of us are even using the latest drivers and that doesn't seem to help.
    Just to get an idea -- is anyone having this problem and NOT running a Creative sound card?

    I have an Audigy 2 ZS Notebook, and it was doing the static/distortion thing after I upgraded. What I did to fix it was to set QuickTime to output sound as 16-bit instead of 24-bit. It's really funny because the soundcard is set to 24-bit mode...

  • People with creative sound card post here.

    There had been some report's people with creative sound card has problems on nvidia chipsets or neo motherboards.  I just want to know how many has problems and how many don't.
    So, people who has problems type 1 at beginning of your post and type 2 if don't have problems then post your spec's
    Cpu
    Operating System
    Motherboard/bios and cell menu settings
    Ram/timing
    Soundcard/drivers
    Videocard/drivers
    Powersupply/Amps +3.3v,+5v,12v
    ========================================================
    Amd64 3000+ 9nm
    WindowsXP sp1
    Neo2 platinum/1.4/htt x4,nvidia/ati speed up disable,cool n quite enable
    Ocz 3200 platinum rev2 (2x512)/ 2.2.2.5
    Soundblaster Audigy2/ 1.84.50
    Tyan 9700pro/4.12
    Enermax EG465-ve 431w/+3.3v-38a,+5v-44a,12v-20a

    I thought I'd share my most recent visitation of the digital poltergeist that is the Audigy 2 SB024x.
    I was looking around my WinXP system panel and noticed that some program had changed the PERFORMANCE->ADVANCED->MEMORY USAGE from PROGRAMS (default) to SYSTEM CACHE.
    Keep in mind as I detail this to you that this build is only a week old, and I've installed very few programs on it, drivers and test utilities mostly...
    Anyway, I change the setting back to the default value (PROGRAMS) and hit OKAY. That very instant, the machine reported detecting new hardware, an Audigy! Given that I already had an A2 installed and mostly functional, this came as quite a revelation.
    I checked the Device Manager, and sure enough, there it was. An Audigy was indicated as having been installed in the place of the newer model.
    I reboot the computer, and when I revisit the Device Manager, the Audigy2 is back, BUT there is a problem (ROLMAO), the card's firewire adapter is all of the sudden marked as broken, so I uninstall it and reboot.
    The machine goes through its startup, and I check the firewire and its okay, NOW, in Device Manager. Good, me thinks.
    Then I go back and run 3DMark03, looking for my error message: FMOD error in FSOUND_SetPaused: Not enough memory
    The benchmark completes without incident three times and the problem is solved. No more messing with my memory timings or sound accelartion. Hurrah!
    In closing, I want to apologize to anyone whose patience that I may have tested with this mini-testament.
    I have no idea why this series of cards http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=290217 is so difficult to configure for the K8N, but its really kind of a nightmare, IMO, and MSI really needs to take a look at it.
    Please guys, there is a problem here, so would you please check it out for us.
    Thanks,
    Moe

  • Programmatic Control of X-FI ??? // Two Creative Sound Cards on Same PC ???

    The pc about below is currently running WinXP, but I plan to replace it with a Vista based machine in early?200.
    1] Can someone please point me in the right directions? I would like to use something like an API or some other interface method to control the volume level of the X-FI usb device. Hopefully to be able to control the volume of?each of the 5 channels independently as well as the master volume. In other words,?have a dotNET program (or VB script, etc etc) that will interface with the X-FI via something running on the same pc. I would prefer it to interface with one of the SoundBlaster or Creative softwares so as to not reinvent any wheels, but that is an option. The simpler the better. I don't need anything fancy and probably just the controlling the volume?levels will work fine.
    Alternately, it might be possible to control the X-FI with an IR remote, but I am not aware of IR functionality in? the X-FI.
    2] I am also wondering: How do I run two different Creative sound cards on the same pc without issues? The rational for this is that I want to improve the sound quality of our home theater pc to 7. Creative quality level, but I need the X-FI to control audio for the home automation software that runs on the same pc. The home automation software generates Text To Speech audio which does not need to flow through the high quality Creative sound card. I was hoping to use the X-FI in a simple mode to route the TTS speech audio out to 4 or 5 sets of speakers as monaural voice. During different occupancy times and night time, its very useful to lower the volume level (especially upstairs when sleeping).
    I have a hunch the X-FI would be a truly awesome device to use for this purpose. There are many other people who would like to do this same thing. It would be nice to have a device like the X-FI that is widely available.
    Thanks much for any and all help. Sorry if this is so 'newbie', but I just don;t know how to start.
    STEVE

    HellknightFA wrote:
    Perhaps Creative Labs as manufacturer of the pehaps widest? spread soundcards on our market can work with Blizzard together to solve this problem.
    Nice idea but keep on dreaming
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=74283&vie w=by_date_ascending&page=
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=7962
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=5882
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=77697
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=32566
    Unfortunately CL don't really care, they just blame it on nVidia and dismiss it.

  • Driver for Creative Sound Card Model no: SB0

    Cud any tell me how cud i acquie the driver for the Creative Sound Card by the model no SB0680. The original CD that came with the packing had lost. Hope cud any help me on this. Thanx

    samram wrote:
    Cud any tell me how cud i acquie the driver for the Creative Sound Card by the model no SB0680. The original CD that came with the packing had lost. Hope cud any help me on this. Thanx
    SB0680 : Creative Sound Blaster 5.
    http://www.creative.com/products/product.asp?category=&subcategory=207&product=484
    Maybe you can install these drivers/software.
    jutapa

  • Data card that supports mac 10.8.2

    hii...i am from india..i need information about data card that supports mac 10.8.2

    RAJSHEKAR MANDADI wrote:
    whats the solution for my problem?
    Google it or wait for someone that knows to answer.

Maybe you are looking for